Can I place an image in the Note section of Contact book . I use a MacBook Pro with Yosemite 10.10 . I am NOT talking about using an image to identify the contact, just an image that contains some information relevant to the contact. I have tr

I want to place an image in the Note section of my Contact book . I use a MacBook Pro with Yosemite 10.10 . I am NOT talking about using an image to identify the contact, just an image that contains some information relevant to the contact. I have tried copying and pasting, dragging and dropping.

From reading Vista forums support for SSD is one of the things Vista SP2 and Windows 7 hope (need) to improve upon. I was in a similar discussion once befoe on SSDs:
http://discussions.apple.com/thread.jspa?messageID=8482110
http://news.cnet.com/8301-13924_3-10026010-64.html
http://www.intel.com/design/flash/nand/mainstream/index.htm
http://www.google.com/search?hl=en&rls=com.microsoft%3Aen-US&q=IntelSSDVista
I don't think it is EFI issue, but with XP and drivers, lack, and wonder if you can try with Vista?
http://arstechnica.com/news.ars/post/20080908-intel-tosses-hat-into-ssd-ring-wit h-80gb-launch.html
That won't solve performance issues, but should work.
http://www.reghardware.co.uk/2008/07/22/sandiskssd_vistabeef/
"My guess is that [Samsung and Microsoft] are maybe working on the OS recognizing an SSD with a 4K-byte sector size instead of a hard disk drive with a 512-byte sector size," Wong said.
Sun is already working with Samsung to bulk up SSD support on the ZFS (Zettabyte File System), which is included in the Solaris OS, and will also be supported in Apple's upcoming Mac OS X 10.6, codenamed Snow Leopard. Sun is adding capabilities to boost the durability and performance of SSDs on ZFS-based operating systems. For example, Sun may add defragmentation capabilities for SSDs, which organizes data in a particular order to enable quicker data access.
SSDs were not considered ideal for defragmentation because of limited read-and-write capabilities, Wong said. However, Samsung and Sun in July jointly announced an 8G-byte SSD that bumped up durability from 100,000 read-and-write cycles to 500,000. That brings defragmentation in SSDs closer to reality, which could improve its caching and provide quicker access to data. Sun plans to put SSDs into storage products later this year.
http://www.itworld.com/operating-systems/54115/samsung-microsoft-talks-speed-ssd s-vista

Similar Messages

  • I use Acrobat X1 Pro. When I launch it I get these pop up about buying or trying DC. I pressed the privacy link to stop it, but it hasn't. It says Acrobat Application Manger. It literally overrides launching Acrobat x1. I use a macbook pro with yosemite.

    I use Acrobat Pro X1. I use a macbook Pro with Yosemite. Was working fine. Last time I launched the software, I got this Abrobat Application Manager poping up and overriding the Acrobat launch asking to buy or try Acrobat DC. I can't make it go away, even when I press the privacy link. Please don't tell me this is some malware bug. Should I uninstall the current AX1Pro and reinstall it. This is very frustrating.
    preznikoffAmac.com

    Hi Peter,
    Use the camera icon to post a screenshot when you reply:
    Does the pop up window have 'License this software' button. If so then please click and activate it.
    Regards,
    Rave

  • I'm using a macbook pro with version 10.6.8 installed. whenever i try to install my software updates, it immediately asks me to restart my computer to finish the installation. after doing so and signing back on to my account no updates have been installed

    I'm using a macbook pro with version 10.6.8 installed. Whenever I try to install my software updates, it immediately asks me to restart my computer to finish the installation. After doing so and signing back on to my account, nothing has changed and no updates have been installed. It still says the same 8 items need to be installed, and the same process occurs again. Any idea how I can fix this?

    You have 10.6 on that machine, I suggest you stick with it for performance, third party hardware and software reasons as long as possible.
    Consider 10.8 (not 10.7) when it's released, because 10.7 and 10.8 will require a new investment in software and newer third party hardware as it requires newer drivers the old machines won't have. (forced upgrade because of software, really nice of them)
    http://roaringapps.com/apps:table
    Far as your Safari problem do these things until it's resolved:
    1: Software Update fully under the Apple menu.
    2: Check the status of your plug-ins and update (works for all browsers) also install Firefox and see if your problems continue. You should always have at least two browsers on the machine just in case one fails.
    https://www.mozilla.org/en-US/plugincheck/
    Flash install instructions/problem resolution here if you need it.
    How to install Flash, fix problems
    3: Install Safari again from Apple's web site
    https://www.apple.com/safari/
    4: Run through this list of fixes, stopping with #16 and report back before doing #17
    Step by Step to fix your Mac

  • I am using a macbook pro with system 10.6.8. I just discovered that no recent files have been backed up to the external disk using Time Capsule.  There is a long list of backups including most recent but no recent files, for some weeks, have been backed u

    I am using a macbook pro with system 10.6.8. I just discovered that no recent files have been backed up to the external disk using Time Capsule.  There is a long list of backups including most recent but no recent files, for some weeks, have been backed up.  I did a full reset of Time Machine.  I disconnected the external drive and reconnected it. It is not a matter of file types, no files and no folders have gotten backed up.  Everything looks normal though unless one goes hunting for recent files on the back up.

    Many thanks.
    With those symptoms, I'd try the following document:
    Apple software on Windows: May see performance issues and blank iTunes Store
    (If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.)

  • My wife and I both have the iphone and we use my macbook pro with iTunes to sync our ipods. When I do something on my iPhone it shows on hers. How do I set up her a seperate iTunes acct on my mac so she can operate independent of me?

    My wife and I both have the iphone and we use my macbook pro with iTunes to sync our ipods. When I do something on my iPhone it shows on hers. How do I set up her a seperate iTunes acct on my mac so she can operate independent of me?

    There's info here on setting up separate libraries and user accounts. You won't have to reload (or re-import) all the music, just copy it.
    The reason I suggest separate accounts on the Mac is because if you have the two libraries under the same user account, iTunes will also open the last library that was open in that account, and you'll always have to be mindful of which library that is. If you open iTunes and find it's not your library, you'll have quit, relaunch holding the option key and select the other library.
    No, you won't have to log in and out of the Mac. (If I'm understanding your question here.) Multiple accounts can be logged in at the same time. And with fast user switching, you can toggle between user accounts.
    I'll admit that maintaining the two libraries gets a little tricky, because if you share all the same music, you'll have to add it to one and update the other. (That won't happen automatically.) But I think Home Sharing makes this much easier to do.
    Hope that helps!

  • Can't install HP Color LaserJet 2600n to my new macbook pro with Yosemite ? Message error : "Can't download the software because of a network problem."

    Hello,
    I'm trying to install my HP Color LaserJet 2600n (USB) to my new macbook pro with Yosemite ? It detects the printer but when I try to install it, I get the message error : "Can't download the software because of a network problem."
    I tried to install the software via the HP website. It's not working.
    Can someone help me with this one ?
    Thanks,

    HP Print Drivers

  • Hello, this might be a basic question, but how do you open QuickTime to record a new webinar? I have a new MacBook Pro with Yosemite and can only get QuickTime to appear in Finder but not actually open to allow me to record something new. Thx.

    Hello, this might be a basic question, but how do you open QuickTime to record a new webinar? I have a new MacBook Pro with Yosemite and can only get QuickTime to appear in Finder but not actually open to allow me to record something new. Thx.

    Hi Winterwilly,
    Welcome to Apple Support Communities. 
    The article linked below answers your question of how to use QuickTime to record something on your MacBook Pro’s screen.
    QuickTime Player 10.x: Record your computer’s screen
    Cheers,
    -Jason

  • Hi guys, I recently got a new MacBook Pro with a USB Superdrive. A disc won't eject, does anyone know of a way to eject it? I'm in Morocco for the next 10 days so going to an Apple store is not possible. Any help would be gratefully received, thanks

    Hi guys, I recently got a new MacBook Pro with a USB Superdrive. A disc won't eject, does anyone know of a way to eject it? I'm in Morocco for the next 10 days so going to an Apple store is not possible. Any help would be gratefully received, thanks

    Five ways to eject a stuck CD or DVD from the optical drive
    Ejecting the stuck disc can usually be done in one of the following ways:
      1. Restart the computer and after the chime press and hold down the
          left mouse button until the disc ejects.
      2. Press the Eject button on your keyboard.
      3. Click on the Eject button in the menubar.
      4. Press COMMAND-E.
      5. If none of the above work try this: Open the Terminal application in
          your Utilities folder. At the prompt enter or paste the following:
            /usr/bin/drutil eject
    If this fails then try this:
    Boot the computer into Single-user Mode. At the prompt enter the same command as used above. To restart the computer enter "reboot" at the prompt without quotes.

  • I am unable to open encrypted emails using webmail and a CAC reader.  It says "content can't be displayed because the S/MIME control isn't available."  I'm using a Macbook Pro with 10.10 OS and have tried both Safari and Chrome.

    I am using a Macbook Pro with OS X Yosemite 10.10.2.  I am unable to open encrypted emails using webmail.  I have verified my certificates are loaded in the keychain for my military common access card while using a CAC reader.  When I try to view the message it gives me the error saying "content can't be displayed because the S/MIME control isn't available." 

    I am using a Macbook Pro with OS X Yosemite 10.10.2.  I am unable to open encrypted emails using webmail.  I have verified my certificates are loaded in the keychain for my military common access card while using a CAC reader.  When I try to view the message it gives me the error saying "content can't be displayed because the S/MIME control isn't available." 

  • Should I upgrade to Snow Leopard/ Lion using a MacBook Pro with 2.26 GHz Inetl Core 2 Duo Processor and 2GB Memory? Can my old macbook take it?

    Should I upgrade to Snow Leopard/ Lion using a MacBook Pro with 2.26 GHz Inetl Core 2 Duo Processor and 2GB Memory? Can my old macbook take it?
    thanks

    Yes. You should be fine with Snow Leopard, but Lion requires a minimum of 2 GBs of RAM. If you upgrade to Lion I would first upgrade your RAM to at least 4 GBs if your model supports it. Also, see:
    How to Install OS X Updates Successfully
    A. Repair the Hard Drive and Permissions:
    Boot from your current OS X Installer disc. After the installer loads select your language and click on the Continue button. Then select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally. 
    If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger) and/or TechTool Pro (4.5.2 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    B. Make a Bootable Backup Using Restore Option of Disk Utility:
    Open Disk Utility from the Utilities folder.
    Select the destination volume from the left side list.
    Click on the Restore tab in the DU main window.
    Check the box labeled Erase destination.
    Select the destination volume from the left side list and drag it to the Destination entry field.
    Select the source volume from the left side list and drag it to the Source entry field.
    Double-check you got it right, then click on the Restore button.
    Destination means the external backup drive. Source means the internal startup drive.
    C. Important: Please read before installing:
    If you have a FireWire hard drive connected, disconnect it before installing the update unless you will boot from this drive and install the update on it. Reconnect it and turn it back on after installation is complete and you've restarted.
    You may experience unexpected results if you have installed third-party system software modifications, or if you have modified the operating system through other means. (This does not apply to normal application software installation.)
    The installation process should not be interrupted. If a power outage or other interruption occurs during installation, use the standalone installer (see below) from Apple Downloads to update.  While the installation is in progress do not use the computer.
    D. To upgrade:
    Purchase the Snow Leopard Retail DVD.
    Boot From The OS X Installer Disc:
    Insert OS X Installer Disc into the optical drive.
    Restart the computer.
    Immediately after the chime press and hold down the "C" key.
    Release the key when the spinning gear below the dark gray Apple logo appears.
    Wait for installer to finish loading.
    E. If updating:
    Download and install update(s) 
    Use Software Update, or
    Download standalone updater(s).

  • TS1389 Only one song won't play after authorizing my computer. I authorized it over and over. I even deauthorized all computers, and still same results. How can I fix this ? I'm using a MacBook Pro with iTunes 11

    Only one song won't play after authorizing my computer. I authorized it over and over. I even deauthorized all computers, and still same results. How can I fix this ? I'm using a MacBook Pro with iTunes 11

    Hi Deb,
    Deauthorizing all is definitely the way to go.  You will just need to authorize your computer again after, as well as your husband's.
    Here's some additional information on deauthorizing all:
    iTunes Store: About authorization and deauthorization
    http://support.apple.com/kb/ht1420
    I hope this helps!
    - Ari

  • Where are the backup files for my iPad located on my macbook pro with maverick ?

    where are the backup files for my iPad located on my macbook pro with maverick ?

    As an addendum, if I need to, and hopefully won't, unless I switch computers, how can I revert from a copy of a different backup?  Thanks. :-)

  • I am using a MacBook Pro with 16GB ram.  PS opens but I cannot get any files to open.  I need some h

    I am using a MacBook Pro with 16GB ram.  PS CS6 opens but I cannot get any files to open.  I need some help please

    What files? How do you try to open them? From where? What else can yyou tell us? You need to provide more info.
    Mylenium

  • At the moment i'm using my macbook pro with an ethernet cable = where i'm now i don't have wi-fi - now i'm trying to do a wi-fi hotspot for my iphone through my macbook pro, but it's doesn't work - please help me! :)

    At the moment i'm using my macbook pro with an ethernet cable = where i'm now i don't have wi-fi -> now i'm trying to do a wi-fi hotspot for my iphone through my macbook pro, but it's doesn't work - please help me!

    Theres almost a trick to it for first time users, goto SETTINGS...General......Cellular (if Verizon) ....Personal Hotspot, turn it on.....turn on wifi on your Mac, select your Iphone.  Enter password.
    If you take too long doing it, youll need turn turn off and on real quick the "personal hotspot" slider on the Phone.......then go quick again thur the Mac.

  • I am from Russia,so can i buy a Macbook pro with retina in Usa or in another country and use it in russia,with Russian language???

    I am from Russia,so can i buy a Macbook pro with retina in Usa or in another country and use it in Russia,with Russian language???
    Like iphone you can buy it in Usa without contract and use in other countries,you can select language in iphone,can i select language in macbook pro???
    Thanks

    Sure, you can choose and use MBP with Russian language.

Maybe you are looking for

  • IDOC  - HRMD_A - Infotype 35

    Guys ,  everytime i change infotype 2 for example  a new idoc is created with this new information, however i want to do this for infotype 35 , i mean send the idoc again but without send any information of the infotype 35. how could i achive this ?

  • Define Currencies of Leading Ledger Error

    Dear Friends, I need to replicate a ticket, which consists of three currencies AED,USD,GBP. In the Spro-Define Currencies of Leading Ledger, Two currencies of AED and USD are already defined. when i try to enter 3rd local currency, 40 - Hard currency

  • 2012 r2 rds deployment cannot connect to sql server after reboot

    We have a ha connection broker setup with 2 connection brokers and everything was working fine up untill the servers were rebooted for updates. Now users cannot connect to thier collections and I have an error in the event log that the deployment cou

  • Acrobat Address Book methods in Digital Signature API

    Can anyone point me to code samples using the Acrobat Address Book methods in the Digital Signature API (AABFindCertsByName, AABGetCertTrust for example)?

  • Adobe Premiere Pro CS3 "The editing mode used by this project could not be loaded."

    Hello- I am encountering an issue with my Adobe Premier Pro CS3. I am trying to open up a project that another person has created on a different editing system. When I try to open, it comes up with the error "The editing mode used by this project cou