Can I play tracks from my iPod via Airport Express on only from my laptop?

I can play tracks from my laptop thorugh my Bose Lifestyle Airport Express. Is there a way to play tracks from my iPod Touch through my Bose system via Airport Express? My Airport Express is set up as a client to my Sky Broadband wireless router.

I set up my laptop to my Bose Lifestyle System via Airport Express. It may be different for MAC but I just downloaded the Airport Express software and followed the on-screen set-up procedure, which includes entering your WI-FI key. I do not have an iPad. You need to select Airport Express in iTunes as your sound media. This is easily switched by an icon in the bottom right corner of the screen. You will need to switch this back if you want to revert to using the laptop speakers.

Similar Messages

Can I play ipad / iphone etc direct to airport express without router or internet?

Can I play ipad / iphone etc direct to airport express without router or internet?

Something must produce a wireless signal to do what you want.
The AirPort Express is a router.
Is it possible to configure the AirPort Express to "create a wireless network" and then ignore the messages informing you that you do not have an Ethernet cable plugged into the Express,and do not have an Internet connection / DNS service.

Stream from my iMac via airport express to my Harmann Kardon AVR360

I want to stream music from my iMac via airport express to my Harmann Kardon AVR360, but without success. I'm using a mini jack -> optical adapter. Any recommendations on how to make this work?

The issue may be the adapter or cable that you are using. Since both your AirPort Express and Harman Kardon support digital audio optical connections, the simplest connection between them would be to use a cable with a 3.5 mm minijack to TOSlink optical connector on one side and a TOSlink optical connector on the other side.
I also have had scenarios where I had the right cable/connector but either the cable or connector was faulty.

When playing iTunes from 2006 MacBook via Airport Express remote stereo speakers, the music keeps dropping in and out

I've tried hours and a trip to the Apple Store to resolve this problem, and no luck so far.
We have two Airport Expresses -- one is an older "g" version (from 2006), one is a newer "n" version (a couple of years old).
We have one older MacBook (from June 2006) (so it can only use "g" wireless and also cannot be upgraded to OS X 10.7 "Lion").
We have one MacBook Air and an iMac (both less than a year old), an iPad (about 2 months old), and a recently acquired AppleTV (in the past few weeks).
We also have two iPhones that do use our local wireless network on occassion.
We have stereo speakers that are currently connected into one of the Airport Expresses.
For years (until the past few weeks) I played music from iTunes on my first generation MacBook to the speakers with no problems (using the older "g" Airport Express). Recently, however, when playing music remotely over the speakers we have gotten fairly regular (though at random intervals) drops of the music in and out (drops are for a second or two each). So far, here's what we've tried to do:
(1)     Went to the Apple Store, where they thought the problem might be compatability between the g and n equipment in our house. They suggested that we get an Airport Extreme and use that as the base so that 2.5 GHz and 5 GHz networks could each be set up, allowing the two systems to play nicely. Spent a couple of hours setting everything up. No dice.
(2)     The skipping happens even when (a) I turn off the Apple TV; and/or (b) turn off the older Airport Express and just use the Extreme and the "n" Express (with the "n" Express as the connection to the stereo).
(3)      When I have the wireless network drop-down menu selected on my MacBook, the skipping occurs immediately after the computer is "looking for networks" (as shown at the top of the menu). The computer does this at random intervals on a regular basis. The skipping, however, will occur even if the menu is not selected.
(4)     Here's the weirdest part. The skipping has even occured when playing iTunes from our newish iMac, with the older MacBook shut down, with the older Airport Express shut down. In this case, the skipping only appears to occur when we have the wireless network drop-down menu selected and again, it occurs when the computer is "looking for networks" which occurs at random intervals. In this situation, the skipping only seems to occur when the menu is selected.
At this point, if I can't find another solution, I'm going to return the Airport Extreme, and just give up playing music over our stereo speakers from the MacBook (and instead transfer music to the iMac and play from it). But I thought I'd try a last-ditch effort to ask for help to see if anyone could figure out what might be causing the problem. I would chalk it up to the problems of using my old "g" network MacBook on a newer "n" system (though I'm not about to spend $1K+ to upgrade my laptop just for this), but for (4) above, which seems to indicate something else is going on.
Any help would be most appreciated!

Unfortunately, your description of the problem and the placement of both your main and AirPort Express routers does lend itself to believe the problem is most likely Wi-Fi interference. If it isn't the microwave or portable phones, it could be obstacles like walls between the routers that may be preventing the stream from consistently reaching the Express.
In your configuration, the stream will first travel to the main router, and then, from the main router to the AirPort Express. If, for example, you started the stream in the same room as the Express, that stream would have to travel across several rooms at least twice.

Play DVD with audio sound via Airport Express speakers

Is it possible to play my DVD with audio sound via my Airport Express speakers?
I can play music with iTunes trough these speakers, it would be nice if I can hear my DVDs aswell.
iMac intel core duo Mac OS X (10.4.7)

Not using Front Row.
The real issue here is that audio and video stream at different speeds and it is hard to maintain sync. You know how when you hit play within iTunes it takes a while for the song to start through the speakers? It's the same with the DVD. So you'd need to work an offset into the audio when playing a DVD and it's not an exact science.
You can download VLC player and mess around with the offset, then you'll also need a program like Airfoil to be able to force audio through the airport express.
Good luck!

Connect to Win (wired) network from MacBook connecting via AirPort Express

Hi,
I have a MacBook (OS 10.4.10) that I was connecting to my Windows network via a Linksys WRK54G Wireless router (configured as a WAP), which in turn was connected to a Netgear FVS318 VPN Firewall Router. The FVS318 connects to my cable modem and 2 Windows XP Pro PCs. The Linksys WRK54G has been flaking out, so I replaced it with an Airport Express. My MacBook and a Windows XP Pro laptop are both able to connect to the internet via the airport express, and they are both able to ping the IP addresses of my (wired network connected) Win XP Pro PCs. However, the PCs no longer show up under "Network" on the MacBook, nor can I connect to the shared directories on the (wired) Windows PCs from the Win XP Pro laptop (via Start Menu => Run => enter IP address). I have not found any answers so far either using Google or Apple Support website. Surely this is possible -- what am I missing? Thanks.
- Scott

Hello sborisch. Welcome to the Apple Discussions!
If I understand your network configuration, you just need to configure the AirPort Express Base Station (AX) as a bridge...
To set up the AirPort Express Base Station (AX) as a bridge, either connect to the AX's wireless network or temporarily connect your computer directly (using an Ethernet cable) to the Ethernet port of the AX, and then, using the AirPort Admin Utility (located in the \Applications\Utilities folder), make these settings:
Network tab
o Distribute IP addresses (unchecked)
o Apply the new setting.

MacBook can't find network printers or servers via Airport Express

My MacBook won't see my Laserjet 6MP (connected thru JetDirect) using either Appletalk (active on Airport but not on Ethernet) or IP Printing (via LDP). I just updated to 10.4.6 and it still doesn't work. I'm using an Airport Express which is connected to an office ethernet network via Belkin Router.
I do get a good internet connection but interestingly enough, when I try to see the other computers on the network, they don't show up in the "Network" window. However, if I type in their IP addresses in the "connect to server" window, they show up just fine. I get the same results on an iBook G3 (which connects to everything properly when I use a hardwire Ethernet instead of Airport).
Any idea what might be going on?

SUCCESS! I just got off the phone with one of the head printer engineers at Hewlett Packard. The basic problem was that BOTH the Belkin router and the Airport Express were supplying IP addresses via DHCP and they were fighting with each other. Using Airport Admin Utitlity, I turned off "Distribute IP Adresses" in the Network Tab. Basically, this turns the Airport Express into a repeater for the Ethernet router.
Now the MacBook is getting it's IP address from the Ethernet router, as is the printer, and everything is fine. All computerS, wired and wireless, can see each other in the network browser and print to all the printers.

I can stream from ios to new airport express but not from windows 7 or powermac G5

I have new airport express and older apple tv on my network. Both are connected and found by all devices - Windows 7 laptop, Powermac G5 and all ios devices. I can stream music via airplay to both airport express and apple tv from ios devices (one at a time of course). I can stream from itunes to Apple TV but cannot connect to the airport express! It shows up and I get the dredded error: An error occured while trying to connect...
I tried some of the many ipv6 suggestions that I've seen here but nothing is working.
Anyone have the setup? Is this an airport express setup issue? Please help!!!

OK, I'm tipping my hat to Apple's (new) online experts. Great job.
They might be able to solve YOUR problem, too. Find them at:
http://www.apple.com/support/expert/

ITunes 8: I can no longer connect to remote speakers via Airport Express

Cannot connect to my remote speakers, worked before iTunes 8"
I have restarted the computer, iTunes, QT 7.5.5, run disk utility
I get the following error code (-3256) Apple KB research says:
AirTunes: Error -3256 when streaming to multiple AirPort Express units  You may see this message: An error occurred while connecting to the remote speaker speaker_name . An unknown error occurred (- 3256 ).This occurs with iTunes 6.0.2 or later.SolutionIf you use a third-party firewall or router, make sure that it is configured to permit UDP traffic. http://docs.info.apple.com/article.html?artnum=303157
I followed the KB link, tried KB solution, then I sent this off to Apple.
"Mac G5 2.0 Ghz, OS 10.5.4 just installed iTunes 8, one (1) Airport Express connected to remote speakers. Firewall under Sharing in System preferences does not offer firewall access. Firewall is under Security but "Advanced" is grayed out.
Cannot connect to my remote speakers, worked before iTunes 8"
I have restarted the computer, iTunes, QT 7.5.5, run disk utility, unplugged the airport express.
My G4 PowerBook running an earlier version of iTunes connects without problem.

I just got off a 30+ minute phone call with an Apple Support rep about this. I'm getting error -3256. The rep was patient and tried hard to solve the problem, but was basically clueless. I have a case number and was encouraged to call back tomorrow to speak with a product support specialist.
This stinks. AirTunes is my primary way of playing music from my computer. With no obvious way of rolling back to iTunes 7, this is a big deal.

Very slow printing from Konica connected via Airport Express

Hello folks,
I have a very strange problem with erratic printing to a network printer, connected to an Airport Express via ethernet.
The Network:
- Draytek modem/router hosting DHCP
- Time Capsule connected to Draytek. It's in bridge mode, and runs the WiFi network
- Airport Express 1 in "Join a Network" mode, ethernet clients allowed
- Konica Minolta Magicolor laserjet printer connected via ethernet to AX1
- Airport Express 2 in "Extend a Network" mode elsewhere in the office
All client devices on the network are getting IP addresses in the correct range etc. I have fixed the IP of most devices at the router level, so they don't change.
Client Macs print directly to the printer using IPP (or might be LPD, I can check if relevant) using apparently a correct driver and IP address.
WiFi network is very strong throughout, and the distance between Time Capsule and AX1 is just a few feet.
Here's the problem:
At the start of the day, the printer works just fine. Fast.
Then, inexplicably, you send a document to it and the print queue reports "Spooling....xx%" which increases painfully slowly compared to when it's working normally.
This happens randomly with both small and large files. A modest photo can take over an hour to fully spool and print when it's doing this.
Turning the printer off and on again tends to make it work properly, until the above happens again.
This is driving me mad. Is there a problem with:
(a) The WiFi network or airport hardware
(b) The printer
(c) The drivers
(d) The printing protocol
(e) Me
(f) All of the above
Any insight would be most welcome. The Konica tech reckons it's working, but I think he didn't spend long enough sending print jobs to it for the problem to manifest.
P.S.
One of my main questions is, when the print queue says "spooling", is this the process of progressively sending the file over the network? Or does spooling occur when the data is either already fully arrived at the printer, or hasn't left the Mac yet?
Could the printer's unwillingness to accept data cause the slow spooling? Why might this happen?

It should work. Enable Printer Sharing via System Preferences -> Sharing. The Mac does need to be turned on.
P.S. Try to just post one thread on your question instead of crossposting over several forums.

Can i share files between two macs via airport express?

hi. we have an imac and a macbook connected to the internet with airport express. all is well with that, but i'd like to be able to share files between the two computers. it seems like i should be able to, but i can't figure out how. can someone help?
thanks.

Hello smw380. Welcome to the Apple Discussions!
Yes. You just need to enable "Personal File Sharing" on both Macs.
o System Preferences > Sharing > Services tab
o Personal File Sharing: On (checked)

Airport Express: Sound only from left channel

I've got an Airport Express which used to work fine, but at some point in the past few months, I noticed that there was no audio coming from my right speaker when using Airtunes. I've check the cable and it does transmit both left and right when I hook my iPod up to it.
I've also got the low volume problem going on in the left channel that's working. And ideas?

I took the AirPort Express to the Apple Store and it turned out that it was a physcial problem with the hardware. It had to be replaced.

Connecting to a pc from my mac via airport express wireless network

I have successfully been able to access my mac from my Windows XP machine via my AE wireless network that I set up with my Mac. However, I am unable to do the reverse. I.e. connect to my PC from my Mac.
There seem to be two issues I need to figure out to make this work:
1. Firstly, the option to allow sharing for any of my Windows folders has been restricted because apparently I need to create a network first but I have a network and both the PC and Mac can access the internet, share a printer and see each other via this network so I don't understand what's wrong. Do I have to create a network from the pc side of things as well in order for this to work?
2. When I attempt to connect to the pc from my mac I do the following from Finder: GO >> "Connect to Server" then I type in smb://<ip address of the pc>. When the dialogue comes up asking for "Workgroup/Domain", "Name" and "Password" comes up I know I have the correct workgroup and I know the pc is there because it's full name is displayed but I'm not sure what to enter as "Name" and "Password". I assumed it was the username and password for the windows user on the pc whose files/folders I want to access but then I'm told the connection can't be made because the name or password isn't correct. I tried every user name and password I could think of in these fields--even the accounts for my mac--but they all give me the same response.
I'd appreciate it if someone could someone lend a hand.
Joey

Sorry, I don't know which articles you have already reviewed.
Sharing folders on the PC should be nothing more than enabling "File and Printer Sharing for Microsoft Networks" option under Network options & then identifying which folders you want to share.
Other references to try:
- http://docs.info.apple.com/article.html?path=Mac/10.4/en/mh1164.html
- http://docs.info.apple.com/article.html?artnum=106471
- http://docs.info.apple.com/article.html?artnum=19652

Speaker volume via Airport Express

My iTunes volume plus the volume on my speakers are both set to the maximum but the music volume is very low when I play iTunes through my speakers via Airport Express - much lower than if I plug my iPhone directly into my speakers
Any tips on how to fix this would be much appreciated
Thanks!

have you tried to power cycle your gear ?
shut everything down for 10 minutes. then, in intervals of 5 minutes, turn the modem back on, followed by the main router, the express next, and you computer last.
does the problem persist ?

Playing videos of an ipod via xbox 360

i was just curious as to if you connect like a normal ipod video with your xbox and go to the media>video tab on the xbox dashboard, can you play videos from your ipod via the xbox 360???? that would definitely be legit cuz im always bumming movies off of my friends itunes and then i could watch them on tv via xbox 360 connection. let me know

that would definitely be legit cuz im always bumming movies off of my friends itunes
definitely NOT legit.
As to whether an xbox can handle this depends on what acessories you have. Apple and other companies make docks with A/V cables for playing video to TVs. If xbox can take those cables as inputs then it should work.

Can I play tracks from my iPod via Airport Express on only from my laptop?

Similar Messages

Maybe you are looking for