Can i print wirelessly from iPhone to HP OfficeJet 4500 Desktop Wireless All-in-One Printer ?

i just bought a new printer and its not apper in my iphone how can i print wirelessly ? from iphone ?

the HP iPrint app was replaced by the HP ePrint Home & Biz app. The best source of iPad/iPhone printing compatibility information is the HP support page for Cloud services. Click on the section "HP OfficeJet Products" to see a chart detailing AirPrint, ePrint and HP ePrint Home & Biz compatibility for each OfficeJet product.
Note that OfficeJet 4500 is a family of printers, each with different capabilities. When purchasing it is important to identify the manufacturer number e.g. the CB867A and the CN547 are both HP OfficeJet 4500 printers but the latter has wireless networking and the former does not. I suspect the above support page applies to the entire product family.

Similar Messages

HP Officejet 6500A Plus e-All-in-One Printer - E710n wireless print and web app problem

We have an HP Officejet 6500A Plus e-all-in-one Printer - E710n and run Windows 7 on our laptop.
I have run the wirelss setup wizard and have successfully connected the printer to the router, and both the laptop and printer are on the same network and have identical SSID.
However, we can not send any prints the printer wirelessly. We have to hook it up to the USB to do so. We are also unable to access our web apps; pressing the app button on the printer control panel brings up the following:
"Connection error. The printer was unable to connect to the server. Check your internet connection and try again."
I have run through the suggested solutions under "A Network Connected Printer Cannot Access Print Apps, Web Services, or ePrint" in the customer care help centre which didn't work, although when I tried to enter the IP address under IPv4 into the browser address bar it timed out. I tried the HP Print and Scan Doctor, but it returns a result that suggests everything is fine.
I turned off the firewall and tried again with no luck.
I really am at a loss now. Diagnostics say it should work, but it doesn't. Help!

Disable Bitdefender altogeher and try again.
Also, see this: http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c02251103
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

I have a brand new hp officejet 6700 premium e-all-in-one printer but my macbook pro is not detecting the printer to even install it or make a print can some one tell me if it is a problem with the printer or the macbook pro?

can some one help me with the question ..

no not at all..it was just tested if it was being detected on a windows os..it did..i am doubting either it is a problem with the router or the macbook pro....but earlier it did connect well to a hp officejet pro 8600 e-all-in-one printer over a different network(at someone else's house)...

Can i use use 564 xl ink in HP Photosmart 6520 e-All-in-One printer ?

Can i use use 564 xl ink in HP Photosmart 6520 e-All-in-One printer ?
Have seen some where online some people had problems when used 564XL ink.
Thanks.

Hi,
Double post. Please use:
http://h30434.www3.hp.com/t5/Printer-All-in-One-Install-Setup/Can-I-use-use-564-XL-ink-in-HP-Photosm...
Thanks
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Hp officejet pro 8500 premier all-in-one printer

The above printer is 1 1/2 years old and it has stopped printing. When the printing became light, I installed new print cartridges less than a week ago. Now, after five days, the printer is consistently cleaning the print heads and aligning the print heads and my documents are not being printed. And, what is most frustrating, during all the cleaning and aligning, all of my new ink is gone and I'm receiving a message replace ink cartridges.
Re: Problem with HP Officejet Pro 8500 printer: cleans printheads every time it's turned on
Options
08-24-2011 06:34 PM
Well,
to this is say, "get used to it", or throw it away. Many, Many, Many people have had trouble with this printer.
The following are common and frustrating issues that this printer exhibits on a regular basis:
1. Constant Self-Checking (usually every 20-30 pages of print)
2. Very persistant Printhead Cleaning/Checking, (Every startup and after about 20-30 pages printed).
3. Worn-out printheads (usually within 1,100 to 1,500 pages printed).
4. Paper mis-feeds.
5. Paper jams.
6. Nearly impossible to use once the printer reports ink-depletion.
7. Nearly impossible to use CIS Ink for larger print jobs.
8. Ink and printheads "expire" regardless of when they are placed into service. (get a deal on ink or printheads last year? Too bad, the warranty is already expired, most likely).
In short, this printer is the most EXPENSIVE printer I've ever owned, and the most frustrating to use.
I have just over 2,000 pages of regular text printed matter with very little color, and have already gone through 4 sets of ink, and 2 sets of PrintHeads.
Although it's true that you can leave the unit on, and let it go into standby, you should NOT be punished with constant and time-consuming "self-checking" everytime it's turned on, or prints a handful of pages, BUT, it does NOT appear that HP will be standing behind this printer disaster. AND, to make things worse, they've gone on to redesign it, giving it a different look, and so there are about 6 different models/versions of the OfficeJet Pro 8500.
Anyone needing a reliable print/fax/scan/copy solution should look beyond this printer, because it will leave you wanting more, and spending more than you ever imagined you would have to on a late model printer.ro
What is going on? Why does it just automatically clean and align? I also get alignment failed messages. Any suggestiions?

rammerjammer,
Thank you for bringing this to my attention, your feedback is very important and I want to do my best to help. To answer what is going on, since the printing became light, started cleaning itself constantly, and fails the alignment, the printhead was damaged. Click here to see and use the Limited Warranty for HP Ink Cartridges, Printheads, and Related Supplies. There are many ways to contact HP. The number to call is 1-800-474-6836 for HP and Compaq products for Home & Home Office use. If you no longer have a warranty with the printer you can still use the warranty that comes with the printhead or ink cartridges.
If you have a carepack with the printer that extended the one year warranty then the troubleshooting will be covered along with the printer if the printer needs replacing. Check product warranty here, see HP Out of Warranty Support Options for Select HP Consumer Printers here.
To order a new printhead you can go to HP Sure Supply and enter your printer or go to the HP Parts Store and order the printhead by part number C4900A for the Black and yellow and part number C4901A for the Cyan Magenta. These printheads go by region also so be sure you are using the right region, these were found using the United States region.
The HP Officejet Pro 8500 Premier All-in-One printer has separated the ink cartridges from the printheads. The ink cartridges are on the lower left and the removable print heads are on the carriage inside the printer. The printer goes through a calibration process when turned on that will use ink. Leave the printer on and let it go into stand by mode. This type of printer is energy star efficient and made to calibrate on start up and be left on. Allow the printer to clean or calibrate only if the printer must. If it starts cleaning a lot it may be time to do a little maintenance to the printer (recommend once a month for maintenance). Please see the following links for further details.
Cleaning the Printhead Contacts
Printer Paper Tears, Wrinkles, or is Damaged while Printing from the All-in-One
Paper Path Issues in the Automatic Document Feeder
Officejet Pro 8500 User Guide
The printer has a duty cycle of 7.5k page/month. The XL cartridges have a composite page yield of 1.4k pages with about a third of the black ink left over. To me it would seem that the printhead should last somewhere in between. This printer was designed to save money on ink compared to the rest of the officejets. I hate that it has been causing so much trouble, hopefully the information I provided will help.
HP Officejet Pro 8500 Premier (A909n) and 8500 Wireless (A909g) All-in-One Printers Product Specifications
Click here for page yield information.
Click the Kudos on the left side for helping and click Accept as Solution for providing a solution. I work for HP.
Best Regards,
Kenneth

Problems printing to HP officejet 6500A plus e-All-in-one printer e710n

Hi,
I am struggling to print to my " HP officejet 6500A plus e-All-in-one printer e710n". According to the setup network test (Wireless network test report), everything is successful (status "PASS" for all fields). I also checked that the IP configured is the same as the IP displayed on the printer when i push the wireless button (updated via "Update IP address").
I have a laptops as well as netbooks connected to the wireless network. All these devices could previously print, however now none of them can. When i run the diagnostics (both the standard trouble shooter, as well as the one from microsoft when clicking on the fixit option), no problems are detected. When checking the device manager, i can see no conflicts.
When i open the printer control panel and click on "Customize your printer" and then go to "Ports" and click on the "configure port" option, i get an error "An error occurred during port configuration. Operation could not be completed (error 0x0000007b).".
Please assist with any suggestions.

I was able to resolve the problem.
I reinstalled the printer on one of my other laptops (this might have cleared up an error on the printer). I think the true problem is related to the fact that we left the printer on, we've started switching it off when not in use. Even though it goes into sleep mode, it seems to cause problems over time if not switched off on the printer itself.
The basics i did was check the network connection, printed a status of the network connectivity (you can do that from your control panel on the printer). If the network looks good, then try leaving your printer off for an hour or so, if that doesn't work, try reinstalling the printer on your device and start switching it off after use. I know it sounds crazy, but that's what i've been doing and haven't had a problem since.
It was a strange problem, in some cases i wasn't able to see the printer from devices that previously could, when the devices that could see the printer tried to print, it would print okay for a few pages and then start printing garbage, followed by failing completely and cancelling the print. When this happened there would be an error on the device saying it cannot connect to the printer, even though it could at the start of print.

HP Officejet Pro 8600 e-All-in-One Printer - N911a: Scan & Copy in color results in full cyan page

Product Name: HP Officejet Pro 8600 e-All-in-One Printer - N911a
OS: Windows 8.1 64 bit
I noticed the problem: After I scanned a medical card that was 80% cyan.
Problem: The problem persists when scanning/copying using the ADF or using the scanner glass bed.
Only occurs during color scanning or copying. I can print a file from my laptop or home pc with no issues, as long as the color file did NOT come from my printer.
If I had scanned the small O'Riley's note in black & white there would have been no streaking.
I have reset, used the HPP Dr., cleaned the glass, etc, & followed Solutions 1 - 3 http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c02881567&lc=en&product=4323659&tmp...
I sincerely appreciate your assistance.
Rene'

Hi @Veritasabt,
I see that you are having issues scanning and copying in color from the glass and the ADF. Thank you for providing the screen shot. I can help you out today.
Make sure the printer is connected directly to a wall outlet. (don't use a power hub or a surge protector) This ensures the printer is receiving full power and may help this situation.
Update the printer's firmware. HP Officejet Pro 8600 N911a Firmware.
Try scanning again to see if you have the same results.
Please check your private messages for additional steps to try.
In the forum beside your handle name just click on the envelope to view it.
Have a nice weekend!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

HP Officejet Pro 8600 e-All-in-One Printer - N911a printer assistant

Hi!
So, I replaced an HP Officejet Pro 8600 e-All-in-One Plus with an HP Officejet Pro 8600 e-All-in-One Printer - N911. Subsequently the HP Printer Assistant desktop shortcut disappeared from my computer -- and apparently from the computer entirely because it eludes searches as well. So multiple times (like, 20 times) I have removed and reinstalled the printer on this computer because sometimes -- not every time, infuriatingly -- immediately after installing the printer from the online driver, the Printer Assistant opens -- but there doesn't appear to be a way create a desktop shortcut for it. As soon as I close it, it's gone forever, and it's just not practical to have the Printer Assistant open all the time. The next time I want to scan something wirelessly, I have to go through the process again. It's driving me insane.
Is there any way to download just the HP printer assistant software, or some sneaky way to create a shortcut for it? It's the only efficient way for me to interact with the printer for scanning (the bulk of the printer's usefulness) at my home office, and if I cannot get it to work consistently, this will be the last HP product I buy.
Thanks in advance!

Hi,
Follow the steps below to repair the software installation when cliking the HP Officejet Pro 8600 will not launch the HP Printer Assistant software, these steps should resolve a such:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c03659948&lc=en&jumpid=reg_r1002_us...
Please let me know of any change,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

HP Officejet Pro 8610 e-all-in-one-printer

I really need to find an important fax confirmation and my fax log only shows the last 30 transactions. Same with the call history. Is there any way I can get more than the last 30 items.

Hello @TheVillage,
Welcome to the HP Support Forums!
I understand that you're attempting to retrieve an old fax from your HP Officejet Pro 8610 e-All-in-One Printer. Because this is a consumer level printer it does not store more than 30 faxes within the fax programming. Therefore, there is no way to retrieve that fax information. Going forward I would recommend configuring Fax to a Network Folder. This feature will allow you to receive faxes to a network folder on your computer and also print the faxes on the machine if you want to. If you ever misplace an important fax you can go into the network folder and manually print the faxes.
For additional information regarding Fax to Network Folder please click here. Please refer to pages 12-18 within the User Guide.
Should you require additional assistance with the Fax to Network Folder setup please let me know!
X-23
I work on behalf of HP
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

Cant WiFi connect HP Officejet Pro 8600 e-All-in-One Printer to internet

I cant WiFi connect HP Officejet Pro 8600 e-All-in-One Printer to internet... at least I think that is the problem. I have followed all the instructions on HP Print and Scan Doctor as well as Troubleshoot HP Installation Failure. My router is running fine for everything else and I have entered the static address for the printer into the router. It appears that my printer believes it is connected to my WiFi (Ihave WPS it multiple times), but when I type it's IP address into my IE nothing shows up. My router doesn't appear to see the printer either. I have the latest driver installed on my computer. I suspect this may be a router issue: new router Asus Double 450 Mbps N Router (Dual band - but it appears my router is using the 2.4Hz band to communicate with WPS). Windows 7 64.
Any help is appreciated!
This question was solved.
View Solution.

Hello NRHII,
Welcome to the HP Forums!
I understand you're unable to connect the Officejet 8600 over a wireless connection. I will do my best to assist you! I would recommend power cycling the router, printer and computer:
1) Turn off your printer
2) Disconnect the power cord from the back of the router
3) Restart your computer
4) Wait less than 60 seconds, plug the power cord back into the router
5) Turn your printer back on, wait for the computer to turn on
Is the wireless light blinking on your printer? If so, please reconnect the wireless on your printer by using the wireless setup wizard: (This information is stated here.)
On the printer touch screen, touch the Right Arrow ( ) to display the second navigation screen.
Touch the Setup icon ( ).
Touch Network , touch Wireless Setup Wizard , and then touch Continue . The printer searches for available networks.
Touch the name of your network, and then touch OK .
If prompted, enter the network password, and then touch OK . The printer connects to the network.
Also, as I was typing this post TreeFrog posted some great information to follow.
Have you followed this entire HP document on Printer Does Not Maintain Wireless Connection? If not, follow this document. Please post your results, as I will be looking forward to hearing from you.
Have a great day!
I worked on behalf of HP.

HP Officejet pro 8500A premium, all-in-one printer, scanner problems

I have an HP Officejet pro 8500A premium, all-in-one printer.
Tried uninstalling using the HP supplied uninstall software and installed recommended OSX 10.8 software for this device.
I use wireless scanning. Scanner only scans the first page then shows an error.
Anyone have this problem as well and any possible solutions?
Thanks

The HP Scan works just fine in Mountain Lion for me. Always has.
OfficeJet Pro 8500 A909a
I think the original poster needs to reinstall the latest software for the printer that came with his printer or directly from HP. Then, install the Apple HP updates.
When he unistalled the HP software, it may have removed the software needed for HP Scan to work properly.
The last software I installed from HP was -> HP_Installer_Officejet_Full_Group05_10.3.dmg
Yes, there have been Apple HP updates, but they never stopped my HP Scan from working.

Officejet 4500 G510n-z (all in one wireless) - how to eliminate power save option?

My Officejet 4500 G510n-z (All in one, wireless) works fine until it sits idle - then it goes into power save mode and won't "wake up". I have tried every button on the control panel - and nothing gets it out of power save idle. In this state, you cannot even turn the printer off with the on/off button - to get the unit to work again, you must unplug it, wait, then reconnect the electric cord. Then, it all works fine until the next time it goes into a long power save mode. I've gone through all the help manuals without finding any information about power save options.

Hi there,
Could you provide the community with a little more information to help narrow troubleshooting? What operating system are we using?
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

HP Officejet Pro 8610 e-All-in-One Printer server 2003 - 32 bit

How can we install the drivers for HP Officejet Pro 8610 e-All-in-One Printer on MS Server 2003, 32bit?
The available driver list includes Server 2003 32 bit as an acceptable OS but when I try to install, the installation routine says that it is not compatible. Thank you for your interest in my question

Hi soeasy, and welcome to the HP Forums.
I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial issue. You can do this at HP Commercial Forums.
I hope this helps!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

HP update HP Officejet 6500A Plus e-All-in-One Printer-E710n multi fails @ 96%Z

HP Officejet 6500A Plus e-All-in-One Printer - E710n
Windows Vista
HP is trying to update my HP Officejet 6500A Plus e-All-in-One Printer - E710n w/ "HPZSetup.exe & multi fails @ 96%
Errors:
HP-PhotoSmart All-In-One Series "Error" "wStub" "2229580"
Same message appeared multiple times with new numbers: 459624; 525134; 328216
I am on WIFI but system always shows me on USB. I thought maybe that was the problem so I connected by USB. No Help.
I assume this is an update?? HP is insistant and keeps sending me this update which alwaysends in FATAL ERROR at 96%
Next steps?? Thanks JLM_JR
This question was solved.
View Solution.

No Problem. Is everything working now or this tool only removed the HP software? If so, then try downloading the full feature software to see if this fails or not here. Please choose your correct operating system; Either 32 bit or 64 bit. I will be looking forward to hearing from you.
I worked on behalf of HP.

My 8620 HP Officejet Pro 8620 e-All-in-One Printer IS INCREDIBLY SLOW TO PRINT - TRIED EVERYTHING

I have an 8620 HP Officejet Pro 8620 e-All-in-One Printer It is connected via wireless set-up, with excellent signal strength. It is incredibly slow to print anything, especially PDF files that have graphics in them. I have the latest software installed, latest firmware updates. I have even uninstalled and re-installed, the issue is still there. This is an incredibly crap product, so I'd like to get this issue solved ASAP. Thanks,Brian

For example: printing http://www.nytimes.com/images/2015/07/04/nytfrontpage/scan.pdf Quickly goes 7.03mb/of 7.03mb... then just swirls the "printing" status on the printer's LCD screen, and takes 5 minutes to print...

Can i print wirelessly from iPhone to HP OfficeJet 4500 Desktop Wireless All-in-One Printer ?

Similar Messages

Maybe you are looking for