Can I put a amd 64 X2 3800+ on a motherboard msi K8N neo2 platinium ?

hello
I'm sorry for my bad english but I'm french ....
can I put a amd 64 X2 (dual core) 3800+ on a motherboard msi K8N neo2 platinium ?
Which is the highest processor which I can put on this mothercard ?
thanks well for your help
@+

I'm sorry but I dont find the info on the msi website. I listened it ! but I don't know the adress that you give me.
thanks well for the adress :
but I don't know if it's e4 or e6 or manchester .... if you help me for that proc :
http://cgi.ebay.fr/processeur-AMD-Athlon-64-X2-dual-core-3800-socket-939_W0QQitemZ290129683087QQihZ019QQcategoryZ80141QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
and that : http://cgi.ebay.fr/AMD-Athlon-64-X2-4800-socket-939_W0QQitemZ190124445607QQihZ009QQcategoryZ80141QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
and that :
http://cgi.ebay.fr/AMD-ATHLON-64-X2-4200-4-4-GHZ-1MB-CACHE-939-DUAL-CORE_W0QQitemZ270133637708QQihZ017QQcategoryZ80141QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
I don't want to make a error ....
thanks very well for your help
@+

Similar Messages

MSI K8N Neo2, can't install Windows

MSI K8N Neo2
Amd 64 3500+
Ocz 3700 EB 512Mb x 2 / Corsair pc4400 512Mb x 2
DDR Booster
Radeon 9600XT / GeForce Ti 4200
Audigy 2
IBM Deskstar 40Gb (My raptor is on rma r&r)
Psu Enermax 460w
The system is watercooled.
My Windows got bad after SP2 was installed so I went to reinstall Windows...
When I try to install Windows XP Pro I get Blue Screen/system freeze/black screen.
This happens soon as the cd starts to read the files/installing files after format.
I haven't been able at all to install Windows successfully (I don't even get to windows).
My system is listed above and as you can see I have tried with 2 different graphic cards, 2 different rams and with/without the booster, with/without the soundcard, 3 different dvdplayers and 3 different Windows XP Pro.
Och and yes I have tried the hardware (except mb & cpu, don't have another Amd 64 mb or cpu) in an another computer and they work fine.
Nothing works.
Could it be that the mb that is bad or?

Quote
Originally posted by kensterman
Is your CDROM drive okay? How about the XP CD itself? Either way, it sounds like it's bombing duing the reading/ copying of the files..
I have tried with 3 different dvdrom drives and 3 different XP cd's, results are the same.

Can't I use nvraid without APIC on my MSI k8n neo2?

I have a Windows XP installation without ACPI (Why would I want that?, you may ask.) The reason is that it's a music production oriented installation, and I found that my soundcard performs much better with ACPI off.
Well, I got 2 sata drives and set then up as raid 0, and although they work great in my standard Windows XP with ACPI on, with this one (with ACPI off) I can't make windows recognize the raid.
Could someone please confirm me if it's impossible to use sata 3 and 4 ports set up as raid0 without ACPI?
Thanks.

You have to create an Apple ID a specific way to use it without a credit card. The one you have created now, cannot be changed to not have a credit card. See this support document. http://support.apple.com/kb/ht2534

Help with K8N NEO 4 and AMD X2 3800+!!!

For christmas i got a new AMD Athlon X2 3800+ CPU. System Specs Below.
AMD Athlon 3800+ Dual Core CPU
MSI K8N Neo4 Sli motherboard, nforce 4 chipset
XFX Geforce 7800GT 256 MB PCI-E GFX Card
2X512 MB Corsair XMS 3200 Xtra low latency memory
Antec TruePower 2 550Watt PSU
Now, when ever i'm playing a game, at random time periods, the system will start looping the sound, and after a few seconds it will reboot. When it does this, the monitor will go into standby until it restarts,with the little amber light and everything. It does it more often on some games than others. The memory has passed a 24 hr memtest 86 with no errors, and this is the second psu i've tired and still get the same result. The psu in it right now is brand new. I dunno what to do. I'm tired of not being able to play my games b/c of this. The heatsink on the CPU is stock. Also on the graphics card. Temps never reach above 47C on the processor and 65C on the GFX card. Please help me.

I short of have the same problem.I got my pc about two weeks ago.
AMD 3800+ x2 Manchester E6 (Toledo E6 inCpu-Z)
MSI K8N Neo 4 Sli (came with 3.6 bios upgraded to 3.7 and 2 days ago 3.8)
Sapphire x1600 256 pci e
2x512 Corsair VS512MB400 value select(2,5,3,3,8 1T)
Tagan TG480-U01
The first day after a clean install i runned MSI Live update and it just froze (no other application running) force restart and then the hard disk was gone.Fixed it then updated all the drivers for mb graphics nvidia drivers AMD hot fix and M$ hot fix but still it just freezes.Today there were 2 one when i run MSI live update(??????) and another when using 3Dmark06(froze between tests).
Used memtest for 1 hour no errors no Oc althought when used MSI core cell Oc(bios) in comander mode froze in 1 min.Temps dont go above 41 42 (user mode 7/8 fan speed in core center when in Cool n Quiet temps reach 42 43 even 46 and it keeps the rpm near 1100 1200????????)when running games apps with stock fan.
Whats the problem

Windows doesnt boot anymore , amd format gives problems aswell. [K8N Neo2]

hi guys,
i made a thread about this issue in the dutch MSI forums aswell, but the more help the better no?
i'll first start with my system specifications , so we have that out of the way:
Motherboard: MSI K8N Neo2 Platinum (s939) bios v1.5 (tried 1.B but that didnt solve my problem)
Processor: AMD Athlon 64bit 3500+ (2.2Ghz) (dont know the core , i think it was newcastle)
Geheugen: 2X Crusial BallistiX CL2 PC 3200 512MB (i also have 2x Corsair XMS PC3200 CL2 memory, but i only equipped my computer with the Crusial BallistiX memory atm)
Videocard: Sapphire Radeon X850 XT PE
Power Supply: Enermax 20 / 24pins 32A on the 12V line
well, my problem started about 2 days ago, when i shut down my computer, since the F.E.A.R demo ran a bit laggy ( i had all 4 of my memory modules in my PC then, and i wanted to remove the corsair memory ) once removed i only had the Crusial BallistiX memory in it , in dual channel , slot 1 and 2 (slots closest to CPU) , but once i booted my computer, i got a BSOD just after windows loaded.. something about the ACPI. the STOP number was:
STOP: 0x000000A5(0x00000011,0x00000007,0xF771F180,0x0100000E)
then i putted my corsair memory back in, but then i still got this BSOD.. and it said something about the BIOS, so i updated my bios to 1.B , but that didn't help a bit, so i donwgraded my bios again to v1.5 , hich i have now. i only have the crusial ballitix installed atm, which runs stable according to memtest (ran it for 14 hours, then i stopped it) with this timing: 2.5-2-2-5 1T (Cas latency 2 just wont run stable)
so my memory is OK i suppose.. and wlel, i couldnt get into windows, so as a final solution, i decided to format the harddrive, so i entered my WindowsXP CD , and it began loading the drivers (and i pushed F6 , and loaded the S-ATA / Raid Drivers ) , but straight after it loaded the things of the CD i get:
- a BSOD , with something about the ACPI
- reboot
- flashing underscore in the upper left courner..
so i cant really do anything , except get into the BIOS. i also tried to start windows in safe mode, but then i get a message similar to this:
'Cannot start windows , because the following file is damaged or missing:'
<windows-mainfolder>\system32\ntoskrnl.exe
so i first thought about a virus, but that seems kinda odd , since i run a virus scan everyday (my virusscanner is NOD32) , and i think a virus with such destructive power will be detected..
another number from a BSOD (i get this one most of the times now) is this:
*** STOP: 0x0000007E (0xC0000005,0x804F35C1,0xF7C45F10,0xF7C45C10)
hopefully you guys have an idea what to do, and as a final solution, i am willing to afford a new harddrive, but will that solve my problem? or is something else causing this problem?
Yordy_
(sorry for my bad english, i'm dutch )
*edit*
something i forgot to mention, is that sometimes when i enter the BIOS , it just freezes ( i cannot do anything.. )

Quote
Try another CmosClear like mentioned before for the DMI-Pool and PNP Area to reinitialise.
didnt really get that, but i removed the CMOS battery , and placed it back in again , but that didnt help, and by the way, my problem got worse :(
i didnt do anything really.. just trying to start my computer .. but i can currently do this:
1. Press power on button
2. watch screen
3. press power button to shutdown
and that is as good as it gets :(
it sais to press del to get into the BIOS,but no matter what i press, it doesnt matter.. it then goes to the post screen, and displays this message:
CMOS Checksum failed! Loading defaults
something like that.. and here the system is totally frozen so i have to power off / reboot
and before hat message i cannot push a button!
I dont think my motherboard can be rescued can it?

New K8N Neo2 Platinum, AMD 64 3500+ sytem freezing

I have posted to a couple of forums and still can't get this problem resolved, hope you guys can help.
I put together a new system last Friday night and spent all weekend trying to fix it. I ended up with 2 bad power supplies, one fresh from the store was dead, but got that resolved. Got the system up and running, got online, surfing and FREEZE..everything stopped. Rebooted, 5 minutes later, same thing, over and over again.
Tried checking memory, it's fine, both sticks, power supply is fine, everything seems to be running fine except it keeps freezing after about 5 minutes.
I wonder if it's a bad board, so I tried to RMA it with the vendor and they want me to try outside the case to see if it won't freeze there, haven't had the time yet cause I'm working, will try that tonight.
Also, one guy on a different board suggested that I try a fresh install of windows xp as the old drivers might be interfering with the new drivers. I will try that tonight also.
If anyone can give me any other suggestions, I would appreciate it. If I can't get this resolved, I'm going to send back the board for a new one.
Below are my specs:
AMD 64 3500+
MSI K8N Neo2 Platinum mobo
2 x 512 Kingston ddr400 (pc3200)
antec true power 480
wd 120gb hd, wd 80gb hd
cdrw generic, dvdrw generic
bfg 6800 oc video card
thanks

Thank you both for your posts, they are both informative and I will be using your information Friday night. I'm just so tired after work, I don't want to get part way into it and have to leave it for the next day, I have to get up at 3am everyday and get home around 6-7pm and I'm beat!
So, Friday after work, I'm going to start with just the basics and go from there, using all the information I've been getting from this board and a couple of others. Seems like the best thing to do is, start with barebones, reset cmos, reset battery and install fresh windows os.
I will post Friday after I start and hopfully I will get this problem fixed.
thanks again

Another can't get past 240htt post (k8n neo2)

3500+
k8n neo2 plat (1.1)
adata pc4000 (ddr500)
Fortron 400w psu
With HT at x4, i can't get past 240 when my ram is rated at 250mhz on loosest timings and 1t and dual channel. Doesn't matter whether i'm trying to max my cpu and using divider on ram, or lowering cpu multiplier and maxing ram, both max at 240mhz.
my cpu is watercooled with 1.7v goign to it, and 2.85 volts to the ram. I measured the +12v rail during Prime 95 in Priority 10 mode and it was 11.74-11.75, so psu isn't the problem right?
I first had my agp thing set to 67mhz, and i would get disk write errors and failure to load OS errors during boot up. When i try 68, after sitting at welcome screen for a few minutes, it loads to windows and immediately freezes.
Any ideas?

see here
AMD64 3500+ & MSI K8N NEO2 SATA Oddity
i have the same problem with activated sata controller
htt is max. 230 htt 4x
i hope msi can fix it!!!!!!!!!!!
DOT sergant or so doesn´t function.

MSI K8N Neo4 FI Compatible with AMD 3800+ X2?

I just bought:
MSI K8N Neo4 FI
AMD Athlon 64 3800+ X2
Gainwood 7800GT Golden Sample
hec Pb-480PB 480W
Problem is that i don't get a picture when i start the computer.
Everything seems to work, all the cables are plugged in.
The gfx has power from the cable.
Can it be that the motherboard dosen't recognize the CPU, and that won't give my a picture?
Help would be appreciated.

That should be enough to start the computer. It has two +12V rails, which are of good enough ampage.
Now it looks to me like it needs a newer BIOS version to recognise the CPU.
See: http://www.msi.com.tw/program/support/bios/bos/spt_bos_detail.php?UID=651&kind=1 I think this is your motherboard?!
You'll need another A64 CPU to flash the BIOS though.
Just to settle akhille's mind, you could also try a better PSU.

Newly Built System. MSI K8N Neo4/SLI Plat with AMD X2 3800 Crashing in all Games

I just built this system yesterday..
MSI K8N Neo4/SLI Plat with AMD X2 3800 latest BIOS 3.7 amd MB drivers
I have a Albatron Geforece 7800 GT PCI-E 256Mgs with the latest Drivers. 78
WINXP SP2 latest stuff.
DirectX 9.0C
I have 2 512 DDR3500 Memory Sticks.
SATA 160 Hard Drive
DVD 8X NEC Burner
All 3d games lok it up. 3DMark2001 SE locks it up too.
I ran Memtest and everything passed fine.
Anyway all 2d video works fine. but any 3d video screen goes black and the system locks up solid.
Any help work be appriciated
DaaDoctor

Welcome to the forum DaaDoctor
If you creat a signature (in profile) it will save you having to type your spec's out each time or us looking for it. Use mine as a template.
What PSU are you using ? Can you list the power output ? (writen on side of psu)
Going from your specs you listed your graphics card is very hungery on power so I would suggest your psu isn't up to the job under load.
Post the spec and we will know for sure.

Planning To buy MSI K9N Platinum + AMD X2 3800+

Hello everyone,
as the title as Iam planning to buy a MSI K9N Platinum board with an AMD X2 3800+ for a new system build. Ive been out of the game for a while, the last time I was really up to date on computer technology is when the AMD XP 2500+ Barton was the hottest thing on the market, some what of a new comer to dual core technology. I have a few questions, mainly about the board it self. I did a little searching and that answered some of my question but I have a few more.
Ive read a lot about the shutdown problems from the board when transferring large files or burning DVDs. I have a few questions about that.
From what I see so far, this is a very informative forum and I appreciate any and all information. So here goes:
1) It says on the MSI website that the ram slot for this motherboard is at 1.8 volts. The ram Iam planning to get is OCZ Platinum EL XTC PC2-6400 1GB 2X512 DDR2 CL4-5-4-15 240PIN DIMM Dual Channel Memory Kit. On the OCZ website it says that the ram modules run at 2.1 volts. My Question is if I stick this ram in the mother board will it boot long enough for me to go into the bios and change the ram voltage to 2.1 volts?
2) Now Ive read about the shutdown problems with this board. Ive seen a lot of people up the VCore to 1.35V. If I do this along with a bios flash, will this take care of the problems?
3) Now the dealer that Iam buying my PC from didn't have this board in stock for the last week. He just got them in 2 days ago this week. Therefore Iam assuming he has the lastest version of these boards. Now are these problems taken care of on the new version of these boards? If not what can I do to get rid of them?
4) Is there anything else I should know about this motherboard?
Thanks for the the help.
Ron

1) It says on the MSI website that the ram slot for this motherboard is at 1.8 volts. The ram Iam planning to get is OCZ Platinum EL XTC PC2-6400 1GB 2X512 DDR2 CL4-5-4-15 240PIN DIMM Dual Channel Memory Kit. On the OCZ website it says that the ram modules run at 2.1 volts. My Question is if I stick this ram in the mother board will it boot long enough for me to go into the bios and change the ram voltage to 2.1 volts?
Yes, you could set up manually the voltage to 2.1v perfectly I've got one k9nsli p, with an amdx2 3800+ whit 2gb ddr2 (512x4 twins pack corsair xms2 ddr2 800) that works at 1,9v
2) Now Ive read about the shutdown problems with this board. Ive seen a lot of people up the VCore to 1.35V. If I do this along with a bios flash, will this take care of the problems?
My shutdowns problems was resolved by unnistallin' nvidia IDE controller, nothing about vcore or flashin bios... I keep original bios version 1.0 & Core center shows vcore at 1.33v
3) Now the dealer that Iam buying my PC from didn't have this board in stock for the last week. He just got them in 2 days ago this week. Therefore Iam assuming he has the lastest version of these boards. Now are these problems taken care of on the new version of these boards? If not what can I do to get rid of them?
Good question... 2morrow I'll check on the box of my k9 the part number and will post it
4) Is there anything else I should know about this motherboard?
The first week, I was desire burn my k9 shutdowns... shutdowns.... shutdowns... after I find the cause of that ShiX$/#(! (nvidi IDesuxs controller) my life is happy!
good luck
Thanks for the the help.
Ron

After AMD X2 3800 upgrade MSI Radio causes stop error

Hi!
First of all sorry for by bad English
I have an MSI TV Anywhere master card for about two years now.
Until now it was running fine, using the updated drivers from MSI's site
This include the main driver, and the new WinDVR 3.0 and the updated MSI Radio
With these AMD vs Intel price wars, I've upgraded my Athlon Winchester 3000+ to a X2 3800+
The CPU is running fine
However, MSI radio immedialy gives a BSOD since I have changed the CPU
I have even got as far as reinstalling XP SP2 from scratch, and it still BSOD's :(
I get
STOP 0x000000EA THREAD_STUCK_IN_DEVICE_DRIVER
How do I solve it?
Any other users having trouble with TV Anwhere Master with an AMD X2
CPU has run for several hours PRIME 95 and some heavy games with no crashes whatsoever
Just click on MSI radio and the mouse cursor wil freeze, followed by a BSOD and a reboot
Every time this happend
The only time when I could lauch MSI radio was when I booted Windows XP in safe mode
Thx in advance
Steven
System specs:
CPU AMD X2 3800 Socket 939
RAM 1Gb DDR400
Mobo Asus A8V Deluxe rev2 bios 1018, latest version
2x HDD WD Raptor 740 and Maxtor Diamondmax 10 250
AOpen A600A Case with 350W PSU by Fortron Source Power
PCI stuff:
SCSI Controller for scanner
TV Anywhere Master
Opti USB card
DVD, CDRW, and CDROM drive

Hi Stu!
Followed you advice, I looked a little more at the processor AMD procesor driver program
I already had installed the latest version, but it crashed too :(
However you suggestion had led my to try this:
* Removed the normal AMD processor driver
* Installed the AMD Fix for dual core processors from the AMD site
It worked!! Now MSI radio no more crashes!
knock on wood
I'll report back when there are errors
This is the page I got the utility from:
http://www.amd.com/us-en/Processors/TechnicalResources/0,,30_182_871_13118,00.html
It's the first tool listed
From the desc:
"The AMD Dual-Core Optimizer can help improve some PC gaming video performance by compensating for those applications that bypass the Windows API for timing by directly using the RDTSC (Read Time Stamp Counter) instruction"
Hope this helps anyone who has an AMD X2 an has similar problems
Actually, with the new drivers from MSI I'm quite happy with my TV Anywhere Master
Greetings & thanks everyone
Steven

How many hard drives can you put in a pavilion p2

Can I put one or two more hard drives into a Pavilion p2 1122? Is there a particular spec or physical size that this must be?
This question was solved.
View Solution.

Your HP Pavilion p2-1122 Desktop Computer only has space for one hard drive in it... the one installed at the factory. The only way to add any more drive internally, is to remove the CD/DVD and use that space, or to fabricate and install a drive cage... room permitting.
If you have any further questions, please don't hesitate to ask.
Please click the White KUDOS "Thumbs Up" to show your appreciation
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

Can I put more than one user under one Apple ID account. I want to let other family members use imessage on their own Apple device. Or is there another way to get this end result?

Can I put more than one user under one Apple ID account. I want to let other family members use imessage on their own Apple device. Or is there another way to get this end result?

You can seach the net for solutions like this one http://appletvvpn.com/how-to-connect-apple-tv-2-to-vpn/ another idea is to use a PC as the control and fit that with a wireless card and set up a ad hoc wireless network that the Apple TV uses.

How can i put apps from one ipod to a new ipod?

how can i put apps from one ipod to a new ipod?

iOS: Transferring information from your current iPhone, iPad, or iPod touch to a new device

I can not put the data of a field(LONG RAW) consulted into a item of a data block

I want to query a field that is LONG RAW(it's a image) and put the data into a item of a data block (in Forms Builder), when i write ":BLOCK.FOTO:=vfoto" i recieve this errors: "bad bind variable ....". How can i put the data of field of my DB and put the data in a item of a data block(in Forms Builder)?.
I can store a image in a table of my DB, but i want to query a image stored in my DB and put it into anothers table, all this on FORMS BUILDER.

You have to base the image item on a base table and use EXECUTE_QUERY on that block. You can't do a direct select in PL/SQL into the item

Can I put a amd 64 X2 3800+ on a motherboard msi K8N neo2 platinium ?

Similar Messages

Maybe you are looking for