Can i put in second HDD into Satellite A300-1EG

Hello,
The question is can i put in second HDD to Toshiba A300-1EG notebook, there is a place for one as I found, and what HDD should it be, i mean 2,5" and etc?
As I read, there can be no connection for HDD, all depends on model, how can I found out?
Thanks.

Hi
You can check this yourself.
Remove the plastic cover which secures the second HDD bay.
If there are some HDD connectors then you could install an second HDD.
If the connectors are missing, then you will not be able to use second HDD.
I know its a little but confusing because of the second HDD bay but the point is that different A300 models supports different motherboards and not all motherboards are equipped with two HDD controllers.
Greets

Similar Messages

Can I build in second HDD on Satellite P200-1I4?

Hi!
First of all sorry for my bad English. =((
I have a toshiba SATELLITE P200-1I4 and question is: can I install one more (additional) HDD. Or there is only one SATA slot in this laptop? Unfortunately laptop is not near me now, and I can't remove back panel and see it.
On Toshiba web site I can not find information about it.
Some more information:
SATELLITE P200-1I4
S/N: z7269306k - M/N: PSPB3E-0J601MRU
Thanks, and i am hope all written above is understandable. =)

Hi
I agree with the user above. Please have a look under the cover for second HDD slot to check if there is a second HDD connector or not. This takes only few minutes.
If yes you can ask your favorite computer store to get an additional HDD.

Can I use a second HDD in Satellite P300-27x?

Hello,
is it possible to install a second harddisc in Satellite P300-27x? Is there a connector?
Thx...

Hi,
so my question has not been answered yet. Once again:
is it possible to use a second HDD in P300-27x???
Is there a second Sata-connector?
No, i can`t look inside, because i haven`t one. I would like to change my notebook (P300-20w, it is LOUD cause of GPU), but i need to know if it`s possible to use a second hdd in this model.
Maybe someone can give me an answer?
Thx

I need to plug second HDD in Satellite A300-14V

Hello!
I am using A300-14V and now I need to install second HDD. But 2.5 HDDs have different height from 9.5mm to 12.5mm which one right for my Satellite A300? And I will need to buy also a slide rails.
Could somebody please clarify that it is and give me its part number?
Thanks.

Hi!
> I have a second HDD connector but I have not something to fix HDD on the place which is called a fixing rail or slide rail
For this contact the nearest ASP. They can order all necessary parts to fix the HDD in the second HDD bay.
On the Toshiba website you can search for an ASP:
http://eu.computers.toshiba-europe.com => Support & Downloads
Bye

Second HDD in Satellite X200-21K (PSPBUE)

I'm looking for some informations about installing second HDD into my laptop.
Laptop does have an "empty/spare" bay for second HDD, but there are no disk connectors in bay. So there is no easy way for upgrading.
So I've looked over the net, and as far as i know i have two options:
1) Buy appropriate hdd connectors and 2.5" HDD. Take appart my laptop, connect cables onto motherboard and install second HDD in empty bay.
Q1) Does X200-21K motherboard have second (spare) SATA connector? I assume that motherboard have only two SATA connectors (one for HDD, and one for DVD).
Q2) Is possible to connect two hard drrives onto one SATA motherboard connector?
2) Replace DVD with HDD
Q1) Is this possible? Did someone alreary replaced DVD with HDD?
I've seen on internet that this is possible on MacBook, and on some other laptops/notebook (HP,...)
Thanks for answers
PL

hi petrusko_1,
i cant believer that there is space for a second hdd without connector...are you sure?
can you upload a picture?
- to your first question: do you have the whole number at hands (starting with PSPBUE-)?
this number indicates what hardware/software is inside (ram, hdd, grafics etc)
- second one with the sata issue: one connector = one drive
if you are shure that there is only one connector in your machine you wont be able to connect 2 drives to this single connector.
soldering another connector to the mainboard is dangerous and its doubtful that it will work afterwards....
your idea with using the second connector of the odd (optical disk drive) isnt bad...
maybe it is a baymodule available where you can put in the sec. hdd and install it to the odd bay....
btw: the sata controller doesnt care if there is a hdd or odd attached....

Second HDD on Satellite X200-15K

Can I add a second HDD on this model? There is space, but no adaptation.
Thank you

Do like I did...
I have a X200-1AA. Same problem. Room for 2nd HDD, but no controller.
I teared the computer apart, soldered a thin USB cable to the internal connectors of one of the USB Ports of the X200.
Then, found a way to pass the cable, got a SATA controller from an external 2,5" HDD case, and fitted it in the 2nd HDD compartment.
Took me about 2 hours.
I installed a 100Gb 7200 RPM (Seagate Momentus) for the OS as primary HDD. An putted the stock 320 Gb as 2nd HDD.
Works great, but to be honest, I didn't find a dramatic improvement with the 7200 rpm drive.
Regards,
Andre Antunes

Can I put a SQL query into a bind variable and then use it to output report

Hi,
Can I put a SQL query into a bind variable and then use it to output report?
I want to create a report and an item "text area" (say P1_TEXT) which can let user to input a SQL query(they are all technical users and knows SQL very well). Then, I use a bind variable (that text area) to store the SQL statement. Then, I add a submit button and I want to use the following to output the report:
select * from (:P1_TEXT);
Do you think it is possible to do that? Any known limitations for APEX in this area?
Thanks a lot,
Angela

You can, but make sure it's what you really want to do. Make sure you are VERY familiar with SQL Injection. Most people who know what it is, go out of their way to prevent SQL Injection. You're going out of your way to allow it.
You can try using &P1_TEXT. instead of bind variable syntax. Bind variables are one of the best ways to prevent SQL Injection, which is why it's not working for you.
Once again, I strongly urge you to consider the implications of your app, but this suggestion should get it working.
Tyler

Can I fit a 1TB HDD into a MacBook Pro 17" 2.4GHz which was released in mid 2007? There are 1TB HDD available but they are 12.5" high. Will they fit this model MacBook Pro?

Can I fit a 1TB HDD into a MacBook Pro 17" 2.4GHz which was released in mid 2007? There are 1TB HDD available but they are 12.5" high. Will they fit this model MacBook Pro?

Sorry, 12.5mm high not 12.5" high!
Can I fit a 1TB HDD into a MacBook Pro 17" 2.4GHz which was released in mid 2007? There are 1TB HDD available but they are 12.5mm high. Will they fit this model MacBook Pro?

Can I put RSA Public Key into the ISD in the JCOP?

Dear All,
Can I put RSA Public Key into the ISD in the JCOP? the command I put into the card as follows:
cm> /terminal "winscard:4|FT SCR2000 0"
--Opening terminal
/atrresetCard with timeout: 0 (ms)
--Waiting for card...
ATR=3B 69 00 FF 4A 43 4F 50 34 31 56 32 32 ;i..JCOP41V22
ATR: T=0, N=-1, Hist="JCOP41V22"
/card -a a000000003000000 -c com.ibm.jc.CardManagerresetCard with timeout: 0 (ms)
--Waiting for card...
ATR=3B 69 00 FF 4A 43 4F 50 34 31 56 32 32 ;i..JCOP41V22
ATR: T=0, N=-1, Hist="JCOP41V22"
=> 00 A4 04 00 08 A0 00 00 00 03 00 00 00 00 ..............
(86244 usec)
<= 6F 10 84 08 A0 00 00 00 03 00 00 00 A5 04 9F 65 o..............e
01 FF 90 00 ....
Status: No Error
cm> set-key 255/1/DES-ECB/404142434445464748494a4b4c4d4e4f 255/2/DES-ECB/404142434445464748494a4b4c4d4e4f 255/3/DES-ECB/404142434445464748494a4b4c4d4e4f
cm> init-update 255
=> 80 50 00 00 08 51 39 AE 8E 0C 8B D9 50 00 .P...Q9.....P.
(132953 usec)
<= 00 00 63 06 00 26 29 91 06 75 FF 02 00 84 FC 69 ..c..&)..u.....i
60 80 B4 9C 9C 03 DB 99 9E F8 F4 67 90 00 `..........g..
Status: No Error
cm> ext-auth plain
=> 84 82 00 00 10 E6 A4 12 36 FD 7E 57 D0 2B 9D 5F ........6.~W.+._
65 30 D8 1B 00 e0...
(89378 usec)
<= 90 00 ..
Status: No Error
cm> put-key --mode add 115/1/RSA-PUB/0301000180ad97a22fe7cb29accc3a0b68844f0cb11d057ed8c80c5a4db856138030c419d0a27556902a939152ce79376b1cd0955ce4303bf7560c95230714c583ff8a8f12f1cf23d867e469773d15f0e708332651110cb615c8d373e86d57b5ffe7ff44bcc7690a4d68cbe07743b19879ac5beaeef6e1af133a1fd37b86a5339960b36e53
=> 80 D8 00 01 88 73 A1 80 AD 97 A2 2F E7 CB 29 AC .....s...../..).
CC 3A 0B 68 84 4F 0C B1 1D 05 7E D8 C8 0C 5A 4D .:.h.O....~...ZM
B8 56 13 80 30 C4 19 D0 A2 75 56 90 2A 93 91 52 .V..0....uV.*..R
CE 79 37 6B 1C D0 95 5C E4 30 3B F7 56 0C 95 23 .y7k...\.0;.V..#
07 14 C5 83 FF 8A 8F 12 F1 CF 23 D8 67 E4 69 77 ..........#.g.iw
3D 15 F0 E7 08 33 26 51 11 0C B6 15 C8 D3 73 E8 =....3&Q......s.
6D 57 B5 FF E7 FF 44 BC C7 69 0A 4D 68 CB E0 77 mW....D..i.Mh..w
43 B1 98 79 AC 5B EA EE F6 E1 AF 13 3A 1F D3 7B C..y.[......:..{
86 A5 33 99 60 B3 6E 53 A0 03 01 00 01 00 ..3.`.nS......
(281664 usec)
<= 6A 86 j.
Status: Incorrect parameters (P1,P2)
jcshell: Error code: 6a86 (Incorrect parameters (P1,P2))
jcshell: Wrong response APDU: 6A86
Why the card return error code ? I think the P1 P2 is correct, according to the GP2.1.1?
Thank you!

It also can't input the RSA Public Key to the card, as follows:
cm> /terminal "winscard:4|FT SCR2000 0"
--Opening terminal
/atrresetCard with timeout: 0 (ms)
--Waiting for card...
ATR=3B E9 00 00 81 31 FE 45 4A 43 4F 50 34 31 56 32 ;....1.EJCOP41V2
32 A7 2.
ATR: T=1, N=0, IFSC=254, BWI=4/CWI=5, Hist="JCOP41V22"
/card -a a000000003000000 -c com.ibm.jc.CardManagerresetCard with timeout: 0 (ms)
--Waiting for card...
ATR=3B E9 00 00 81 31 FE 45 4A 43 4F 50 34 31 56 32 ;....1.EJCOP41V2
32 A7 2.
ATR: T=1, N=0, IFSC=254, BWI=4/CWI=5, Hist="JCOP41V22"
=> 00 A4 04 00 08 A0 00 00 00 03 00 00 00 00 ..............
(86180 usec)
<= 6F 10 84 08 A0 00 00 00 03 00 00 00 A5 04 9F 65 o..............e
01 FF 90 00 ....
Status: No Error
cm> set-key 255/1/DES-ECB/404142434445464748494a4b4c4d4e4f 255/2/DES-ECB/404142434445464748494a4b4c4d4e4f 255/3/DES-ECB/404142434445464748494a4b4c4d4e4f
cm> init-update 255
=> 80 50 00 00 08 80 29 78 6F 21 1B 34 89 00 .P....)xo!.4..
(129908 usec)
<= 00 00 63 06 00 26 29 91 06 75 FF 02 00 00 93 73 ..c..&)..u.....s
3A B8 2C 0F D2 4C 06 E2 50 66 7F D8 90 00 :.,..L..Pf....
Status: No Error
cm> ext-auth plain
=> 84 82 00 00 10 3E 88 4D 33 FD 7D A5 56 B6 90 84 .....>.M3.}.V...
78 94 BD B3 7A x...z
(97237 usec)
<= 90 00 ..
Status: No Error
cm> card-info
=> 80 F2 80 00 02 4F 00 00 .....O..
(60917 usec)
<= 08 A0 00 00 00 03 00 00 00 01 9E 90 00 .............
Status: No Error
=> 80 F2 40 00 02 4F 00 00 [email protected]..
(41315 usec)
<= 6A 88 j.
Status: Reference data not found
=> 80 F2 10 00 02 4F 00 00 .....O..
(73177 usec)
<= 07 A0 00 00 00 03 53 50 01 00 01 08 A0 00 00 00 ......SP........
03 53 50 41 90 00 .SPA..
Status: No Error
Card Manager AID : A000000003000000
Card Manager state : OP_READY
Load File : LOADED (--------) A0000000035350 (Security Domain)
Module : A000000003535041
cm> install -b -s -i A000000003535041 A0000000035350 A000000003535041
=> 80 E6 0C 00 20 07 A0 00 00 00 03 53 50 08 A0 00 .... ......SP...
00 00 03 53 50 41 08 A0 00 00 00 03 53 50 41 01 ...SPA......SPA.
C0 02 C9 00 00 00 ......
(227436 usec)
<= 90 00 ..
Status: No Error
cm> ls
=> 80 F2 80 00 02 4F 00 00 .....O..
(61204 usec)
<= 08 A0 00 00 00 03 00 00 00 01 9E 90 00 .............
Status: No Error
=> 80 F2 40 00 02 4F 00 00 [email protected]..
(66302 usec)
<= 08 A0 00 00 00 03 53 50 41 07 C0 90 00 ......SPA....
Status: No Error
=> 80 F2 10 00 02 4F 00 00 .....O..
(72365 usec)
<= 07 A0 00 00 00 03 53 50 01 00 01 08 A0 00 00 00 ......SP........
03 53 50 41 90 00 .SPA..
Status: No Error
Card Manager AID : A000000003000000
Card Manager state : OP_READY
Sec. Domain: SELECTABLE (SV------) A000000003535041
Load File : LOADED (--------) A0000000035350 (Security Domain)
Module : A000000003535041
cm> select A000000003535041
=> 00 A4 04 00 08 A0 00 00 00 03 00 00 00 00 ..............
(84625 usec)
<= 6F 10 84 08 A0 00 00 00 03 00 00 00 A5 04 9F 65 o..............e
01 FF 90 00 ....
Status: No Error
cm> /card -a a000000003000000 -c com.ibm.jc.CardManager
resetCard with timeout: 0 (ms)
--Waiting for card...
ATR=3B E9 00 00 81 31 FE 45 4A 43 4F 50 34 31 56 32 ;....1.EJCOP41V2
32 A7 2.
ATR: T=1, N=0, IFSC=254, BWI=4/CWI=5, Hist="JCOP41V22"
=> 00 A4 04 00 08 A0 00 00 00 03 00 00 00 00 ..............
(83836 usec)
<= 6F 10 84 08 A0 00 00 00 03 00 00 00 A5 04 9F 65 o..............e
01 FF 90 00 ....
Status: No Error
cm> set-key 255/1/DES-ECB/404142434445464748494a4b4c4d4e4f 255/2/DES-ECB/404142434445464748494a4b4c4d4e4f 255/3/DES-ECB/404142434445464748494a4b4c4d4e4f
cm> init-update 255
=> 80 50 00 00 08 FA 3B 98 E7 B4 60 A8 CC 00 .P....;...`...
(128562 usec)
<= 00 00 63 06 00 26 29 91 06 75 FF 02 00 01 26 F7 ..c..&)..u....&.
25 4D B0 B9 D2 1D 18 99 F1 1F E8 25 90 00 %M.........%..
Status: No Error
cm> ext-auth plain
=> 84 82 00 00 10 C9 5D 27 4B C4 54 AC E5 D3 3C 8B ......]'K.T...<.
5F 2D B5 6B 87 _-.k.
(97825 usec)
<= 90 00 ..
Status: No Error
cm> set-key 1/1/DES-ECB/505152535455565758595a5b5c5d5e5f 1/2/DES-ECB/505152535455565758595a5b5c5d5e5f 1/3/DES-ECB/505152535455565758595a5b5c5d5e5f
cm> put-keyset 1
=> 80 D8 00 81 43 01 80 10 B3 6A 9E 82 2D 9E 8E 06 ....C....j..-...
8F B9 52 EA CA 63 FA 6B 03 A4 B7 D6 80 10 B3 6A ..R..c.k.......j
9E 82 2D 9E 8E 06 8F B9 52 EA CA 63 FA 6B 03 A4 ..-.....R..c.k..
B7 D6 80 10 B3 6A 9E 82 2D 9E 8E 06 8F B9 52 EA .....j..-.....R.
CA 63 FA 6B 03 A4 B7 D6 00 .c.k.....
(263198 usec)
<= 01 A4 B7 D6 A4 B7 D6 A4 B7 D6 90 00 ............
Status: No Error
cm> put-key 115/1/RSA-PUB/0301000180ad97a22fe7cb29accc3a0b68844f0cb11d057ed8c80c5a4db856138030c419d0a27556902a939152ce79376b1cd0955ce4303bf7560c95230714c583ff8a8f12f1cf23d867e469773d15f0e708332651110cb615c8d373e86d57b5ffe7ff44bcc7690a4d68cbe07743b19879ac5beaeef6e1af133a1fd37b86a5339960b36e53
=> 80 D8 00 01 88 73 A1 80 AD 97 A2 2F E7 CB 29 AC .....s...../..).
CC 3A 0B 68 84 4F 0C B1 1D 05 7E D8 C8 0C 5A 4D .:.h.O....~...ZM
B8 56 13 80 30 C4 19 D0 A2 75 56 90 2A 93 91 52 .V..0....uV.*..R
CE 79 37 6B 1C D0 95 5C E4 30 3B F7 56 0C 95 23 .y7k...\.0;.V..#
07 14 C5 83 FF 8A 8F 12 F1 CF 23 D8 67 E4 69 77 ..........#.g.iw
3D 15 F0 E7 08 33 26 51 11 0C B6 15 C8 D3 73 E8 =....3&Q......s.
6D 57 B5 FF E7 FF 44 BC C7 69 0A 4D 68 CB E0 77 mW....D..i.Mh..w
43 B1 98 79 AC 5B EA EE F6 E1 AF 13 3A 1F D3 7B C..y.[......:..{
86 A5 33 99 60 B3 6E 53 A0 03 01 00 01 00 ..3.`.nS......
(251210 usec)
<= 6A 80 j.
Status: Wrong data
Add new key set didn't work, try modify ...
jcshell: Error code: -3 (Invalid API parameter)
jcshell: Command failed: Invalid RSA public key
Is it something wrong ?

What is the difference between Satellite A300-1EC & Satellite A300-1EG

Why does the Satellite A300-1EC stand dearer as Satellite A300-1EG, but on configuration loses him?
What is their substantial distinction in?
What model of notebook can advise, in this price range?

Hello
Satellite A300-1EC belongs to PSAG0E group and Satellite A300-1EC to PSAG4E. When this model numbers are different that means they don't have the same hardware configuration.
The first one has Intel 965GM (Crestline) graphic controller. The second one has ATI M82XT (256MB). The HDD capacity is not the same. The first one has 160 GB HDD and second one 250 GB.
So that is the difference between these A300 notebooks.
In my opinion the second one is better. You must make your decision and choose the right one.

Satellite A300-1EG - after upgrade to Vista Premium missing some options

Floor of year back I have bought the laptop Toshiba SATELLITE A300-1EG (Short Model No PSAG4E) . Because of some problems it was necessary to reinstall Windows.
When bought in the laptop stood Windows Vista Home. Now to me have established Windows Vista Ultimate. A problem with some drivers, I can not adjust brightness and sharpness of the screen, and screen prompts do not work. Writes "or for screen prompt the updated video card is required, or the video card compatible with Direct3D" is required.
Help please!

Hello
This sound like that you have forgotten to install the display driver or did you install it?
I think you should visit the Toshiba European website and download the display driver:
http://eu.computers.toshiba-europe.com => Support & Downloads => Download Drivers
It should not be a problem to install it. Just follow the screen instructions. ;)
Greets

Satellite A300-15M - Can I install a second HDD?

Hi there.
I own a SatelliteA300-15M. I bought the laptop 2 years ago. I have already 250GB hard drive which came with the laptop. Recently I got my laptop serviced from local shop. I noticed that it has an additional slot for another hard drive. I saw a post that some of the A300/A305 laptops have the space for second hard drive but not the connectors.
If anyone owns A300-15M can they please tell me if i can install a second internal hard drive in my model? Is there a sure way to find if I can really install a second hard drive?

Hello
> but not the connectors.
So the case is claer: If you dont have a second SATA connector, you cant install a second HDD.
Check also the forum regarding such questions. The point is that one notebook series (e. g. Satellite A300) is always equipped with the same case but the hardware is different. So not all models have the same features. ;)

Satellite X200-245 can i install a second HDD

on satellite X200-245 : can i install a second hard drive ?
is it possible ?
There is a place for it but no sata connection on the mother board where can i find this connector

No you cannot install the second HDD because there is no HDD connector which would allows to connect the HDD to the mobo.
And No, its not possible to upgrade the mobo with such connector.
The X200 has the two HDD bays because some X200 support 2 HDDs and some dont support it.
Your X200 doesnt support 2 HDD

Satellite A200-1S5 - Can I use a second HDD and RAID?

Hi all,
Is Toshiba Satellite A200-1S5 eligible for adding a second hard drive? It has RAID controller as far a I know - could it help?
Thanks,
Denis

The Satellite A200-1S5 does NOT support RAID!!!
But some A200 could use two HDDs (but NOT RAID!!!) There are different A200 models which supports different hardware specifications.
Therefore you can find the second bay at the bottom of the unit.
But if there is no connector for second HDD then this means that there is no second HDD controller and you cannot use second HDD in this A200!!!
Bye

Satellite A50 - Can I put in another HDD?

I have Toshiba Satellite A50-110. My hard disk is broken.
Can I put HDD 2.5" PATA 0160 GB WD Scorpio Blue, 5400rpm, 8MB, WD1600BEVE instead old one?

Hello
First of all you need a need a 2.5 notebook HDD with PATA or lets say IDE interface. If I understand your posting correctly you want to use a 160GB model.
As far as I know Satellite A50 has a 28bit LBA limitation. That means you can only use HDDs up to 120GB.
So you should check the HDD controller which LBA limitation it has.
Is 120GB HDD enough for you?
Greets

Can i put in second HDD into Satellite A300-1EG

Similar Messages

Maybe you are looking for