Can i restrict a movement type with respect to storage location
Hi
Is there any way to restrict the movement type for a particular storage locations.
For eg.
If am using a Mvt 311 tP btwn storagelocations.
If there are 10 Stlocs in my plant i want to restrict 311 only for 7Slocs.
Is it possible
Guide me
Sunil
Sunil
Please contact your BASIS security team , with the help of Authorization roles you can restrict
Reward if helpful
Regards
venu gopal
Similar Messages
-
Movement type authorisation for different storage locations
Hi sdners
can we make the movement type restricted to any storage location
Ex: i have 2 storage locations 1110 and 1114 in plant 1100
and i have two end user mst1 mst2
if so i want to make sure that mst1 is responsible only for issue goods from 111o
and he should not able to issue goods from 1114 vice versa to mst2
is there any possible configuration please let me know.
With regards
S.K.chaitanyaHi
u can achive this through authorization
First
You need to activate the storage location authorization check for goods movements in config
SPRO->Materials Management->Inventory Management and Physical Inventory->Authorization Management->Authoization check for storage locations.
Then required control is achieved via authorization object M_MSEG_LGO.
Get in touch with Basis and ask him to remove required storage location from user ID so that that user will not able to pass any movement to that storage location
Vishal... -
Restriction on movement type,storage location on USER ID
Dear Guru's,
I have to restrict movement type 311 on some storage location for some user ID.Following is already done but not able to restrict the movement of material on other storage location rather than defined:
1) Maintained authorization objet M_MSEG_LGO with two storage location ST01,ST02 and movement type 311.
2) Using BADI MB_MIGO_BADI and maintained Z table with USERID,Mvt type 311,storage location ST01,ST02.
Still we are able to do Mvt 311 on other that defined locations in authorization objet M_MSEG_LGO and Z table....
Kindly give ur valuable suggestion to resolve the issue......
With Regards.HI
For your requirement only I have suggested to create multiple role. In one Role you specify SLOC & MOvt type(only 311) in auth object M_MSEG_LGO & M_MSEG_BWE for slocs where you want 311 movt. In other Roles of goods movt you also specify other SLOCs & all other movt except 311. I mean in the other Role you cant keep the movt type as * in auth object M_MSEG_BWE.
So its a combination of SLOC & MVT tye. Try & give feedback
Shakti
Edited by: SHAKTI BEHERA on Jan 14, 2012 12:15 PM -
How can i add movement type with newly created warehouse
Dear expart
In my SAP below messgae is showning at the time of pass the
transaction code :MIGO
"WM movement type 101 not allowed foe warehouse ABC"- How can i sovle the problem .Plz tell me the SPRO.
YeasinHi,
You can define WM movement type in V_T333:
SPRO > LE > WM > Activities > Transfers > Define Movement Types - here you have to define WM mvt 101 for your WH ("ABC").
LE-WM Interface
SPRO > LE > WM > Interfaces > IM > Define Movement Types - here you can connect WM reference movement type to IM mvt and then WM mvt to WM reference mvt.
Regards,
Csaba -
Restriction for Movement type 202
Dear SAP Consultants,
I want to make the restriction for Movement type 202 by material document.
The user should only be able to do the 202 Movement type in MB1B with reference of 201 Movement only .
Kindly give me the details for incorporating it .
Best Regards
Deepak RadeHI,
202 movement type is the reversal movement type of 201 (goods issue to cost center)
when we cancel material document with 201 system create reversal posting with 202
And you can manually enter 202 movement type also in MB1A and MIGO
Now if you want to restrict user to use 202 directly
GO to OMJJ -> select movement type 202 ->allowed transaction ->Remove MB1A and MIGO and save
So you can only cancel a material document of 201 to create 202 not possible to create manually (without reference)
{IF in future needed you can always add those in OMJJ again}
You can cancel material document is through T. Code MBST
This will fully serve your purpose -
Restriction for Movement type 202 - reference of 201 Movement only
Dear SAP Consultants,
I want to make the restriction for Movement type 202 by material document.
The user should only be able to do the 202 Movement type in MB1B with reference of 201 Movement only .
Kindly give me the details for incorporating it .
Best Regards
Deepak RadeHello Deepak,
This is SAP SNC SDN forum and your query looks like more of the of SAP MM.
You can post your query in SAP MM SDN forum.
SAP ERP - Logistics Materials Management (SAP MM)
Regards,
Nikhil -
How can i restrict the Expenditure Type values at a specific OU ?
Dear Guys,
I would like to ask about the Expenditure Types,
I have implemented two projects for different Operating Units ,
when navigating to any Projects responsibilty,and navigating the Expenditure Type field
the values exist are all the values implemented across the OU not the values entered at this OU
How can i restrict the Expenditure Type values at a specific OU
Regards
Amr HussienHello
When you set up a project there is an option called Transaction Control.
This option allow you to list the allowed or restricted elements of costs for the project.
You may enter the transaction control on a project template and that will be copied to any new project.
The cost elements may be expenditure types, expenditures categories, suppliers, employees, etc.
In your case, I suggest to set up specific project templates for each operating units. On each template enter the list of allowed expenditures types for that OU.
Doing so, the system restricts users from entering any expenditure item, supplier invoice, purchase cost etc, against an expenditure type, which is not allowed.
Dina -
Move all materials in a storage location to another storage location
Hi,
is there in SAP a trx which moves automatically materials from a storage location to another storage location ?
Regardsis there in SAP a trx which moves automatically materials from a storage location to another storage location ?
There is no t code for automatic goods movement.
Have to do manually with t code: MB1B or LSMW -
Restrictions of movement types in MIGO
Hello,
When I select goods receipt in MIGO, I would like the system to avoid using 201 movement type. I mean, if I select goods receipt, it should only work for goods receipt
Is there a way that I can block other movement types like this?
I tried to do it from
SPRO->MATERIALS MANAGEMENT -> INVENTORY MANAGEMENT AND PHYSICAL INVENTORY ->SETTINGS FROM ENJOY TRANSACTIONS -> SETTINGS FOR TRANSACTIONS AND REFERENCE DOCUMENTS
and tried to put some restrictions, but it did not work.
Thanks in advance for your help
IremHi
Access to mvt types can be restricted through authorizations. Check with your basis person (auth object is M_MSEG_BWA).
If you want to skip a particular transaction in MIGO then deactivate it in IMG - MM - Inventory management & phy inventory - Settings for Enjoy Transactions - Settings for Goods Movements (MIGO) - Settings for Transactions and Reference Documents. Select the transaction MIGO - click transaction/event (you can deactivate goods issue here or) - Click goods issue - deactivate which ever are not required. You cannot see deactivated options here in MIGO.
Thanks -
Hello all,
i need a solution...is there a way to restrict a material for a movement type...here is the scenario..i want to restrict a material for 261 movement type.Is there a way to restrict a material for that movement type..Hi Srisha,
You can goto transaction "OMJJ".Here you need to put the no. of movement type.
On the same screen under dialog structure,there is a tab for allowed transaction.You can remove those combinations and you won't be able to use those movement types for any transaction.
But this is not advisable
But still if you go ahead with the changes then keep a note of all the transaction so that in future you can revert them back whenever required.
Basis authorization is another alternative
Reward points if it works.
Regards
Karan
Message was edited by:
Karan Bhatia -
Restrict for movement type 201 by material typeu200F
Dear Gurus,
Can SAP restrict movement type 201 by material type?
For example, Can i set authorization for 201 movement type to only material type UNBW material?Check this answered links
Authorization check on movement of material type
Material Type - Movement Type Link -
Delivery creation with respect to Storage Type
Hi Gurus,
Can we have a control on the deliveries creation with respect to the storage Types.
The situation is to have the outbound deliveries created only from a perticular storage type neglecting other storage types. Is there any customization?
Thanks
ShashidharHi ,
For this you have to define storage type serch strategy,
Path,
LE> WM>Master data >Material>storage type indicator \
LE> WM>Master data >Material>storage section indicator
Then,
LE> WM>Strategires>activate storage type serch (whmaintion indicator -- st type)
LE> WM>Strategires-->activate storage section serch (wh -- maintion indicator -- st section)
Maintain the material master with warehouse number & storage type.
( In the case of fixed bin maintain the storage bin in wm-2 view)
Maintain the storage type indicator & storage section indicator.
If you have allready maintained the storage type search strategy then remove the symbol *** from yor storage type search.
Dev -
Freight condition type-With respect to kilometer
Hi,
I am working on freight related condition type,my requirement is we have to calculate freight cost based on kilometer or miles.But for us the standard condition type is KF00 which is with respect to Gross Weight.
Is there any condition type which calculates Freight based on miles/kilometer covered.If so kindly throw some ideas on it.
My doubt is do we require transportation management.
PradeepHi Pradeep,
without transport management, maybe you need a different approach of calculating freight.
instead of calculating price per Km/Mile by distance, apply cost based on origin - destination of you sold-to and ship-to.
You know Price per km/Mile. You can ask distance between origin and destination points and calculate freight cost then.
The important point here is to determine the different origins and destinations, refine, group, regroup to end in something that may look like:
Origin: country-state-region-city-zip code... (and even sold-to)
Destination: country-state-region-city-zip code ... (and even ship-to)
Freigth cost: (unit cost x distance)
Once you´ve mapped this in an Excel file, you can think of creating a price condition for your freight costs in SAP based on your mapping.
Regards,
JM -
Hi.. Every body,,,
Actully 'm, a basis consultant , i have problem with mb1b Transaction code..
Myproblem is
i have 4 plants 1,2,3,4 now i want to restrict the goods transfer between these plants like
01---02 -
accepted
0201--
accepted
0103--
not accepted
0104--
not accepted
0203--
not accepted
0204--
not accepted
And 1,2,3,4 plants must transfer goods to vendor
i'm trying by using movement types 301 for plant to plant transfer and 541 for plant to vendor
i have created two roles in one i was restricted company code 1 and 2 with movement types 301 and 541
and in another role i was resricted comany code 3 and 4 with movement type 541 only..
If i give thes two roles to diffrent users it is working fine, but if i give to same user but it is not working..
I don't have functional kw......This is an urgent issue.......please suggest how to restrict..Hi.........T'X for responding imm....
But i have tried ,what u said , still same problem...please provide some more inputs... -
Overwrite Standard Movement types with Z movement types in MI10
Dear All,
We have a requirement where we need to replace standard movement types 701 and 702 with Z movement types in transaction MI10. Would there be any exit or BADI in MI10 which would serve this purpose?
We also tried cloning the transaction MI10 but some checks on the TCODE is giving an issue.
Any one come across a similiar requirement, kindly help.
Thank you.
Johnson
Edited by: Johnson Ittyerah on Dec 19, 2007 2:20 PMfollowing badi may help to change the movement types:
MB_DOCUMENT_BADI
Regards,
Gopi ,
reward points if helpfull.
Maybe you are looking for
-
Not able to open the sql ..
hi. i am facing one problem. plz have a look on below image. i am not able login into the data bases.. any has seen this type of problem. i all ready search in google ... They provide some solutions 1) Go to sql view see the data base and then start
-
How to replace InfoCube with a DSO?
Presently in BI 7.0 we have an InfoCube which needs to be replaced by DSO ( Data Store Object). <b> The data flow currently is as follows</b>: Flat File -> InfoPackage->Data Source ---> Transfer Rules ---> InfoSource --> Update Rules ---> InfoCube
-
IPod classic podcast download problem
How can I redownload my podcasts which disappeared the last time I synced my iPod Classic 160gb?
-
N97 FM Radio Application - Lost
I had to reinstall the firmware of my Nokia N97 and restore the factory settings of the phone. After reinstalling the firmware ( note this is not the newest firmware because it is not yet available in the Philippines ) and restoring the factory setti
-
Hello, Is there any BTE which can be triggered when a "Payment Request" is created (Tcode: F871). What is the event number?