Can i run 9ias versions 1 and 2 on the same machine

i need to install 9ias versions 1 and 2 on the same machine but in separate databases, is this possible? if it is possible are there any issues that i need to be aware of?

You can install the portable Firefox 3.6.x version to access websites that do not work with Firefox 5+.
*http://portableapps.com/apps/internet/firefox_portable#legacy
*http://portableapps.com/apps/internet/firefox_portable/localization#legacy36
*Firefox 6.0.x: http://www.mozilla.com/en-US/firefox/all.html
*Firefox 3.6.x: http://www.mozilla.com/en-US/firefox/all-older.html

Similar Messages

  • How can I run 2 Dreamweaver windows at the same time?

    How can I run 2 Dreamweaver windows at the same time on my
    PC?
    basically I have 2 monitors and I want to edit CSS on one
    monitor and have the html page open on the other so I can quickly
    look from one to another with in a split second instead of taking
    that extra time to switch back and forth using the tabs at the top,
    I know I should probably invest into a mac so i can work out side
    of the Dreamweaver application window and I will in the future but
    is there any way i can do this on my windows XP pro PC?
    Thank you
    Maurice

    Open the CSS in DW, and use F10 to open the Code Inspector.
    Place the
    latter as needed.
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    ==================
    "Random_Yggdrasil" <[email protected]> wrote
    in message
    news:gi2htb$j4j$[email protected]..
    > How can I run 2 Dreamweaver windows at the same time on
    my PC?
    > basically I have 2 monitors and I want to edit CSS on
    one monitor and have
    > the
    > html page open on the other so I can quickly look from
    one to another with
    > in a
    > split second instead of taking that extra time to switch
    back and forth
    > using
    > the tabs at the top, I know I should probably invest
    into a mac so i can
    > work
    > out side of the Dreamweaver application window and I
    will in the future
    > but is
    > there any way i can do this on my windows XP pro PC?
    >
    > Thank you
    > Maurice
    >
    >
    >

  • How to run 2 weblogic instance in the same machine

    is it possible to run 2 weblogic instance in the same machine ?
    I have created 2 domains ...domain-1 and domain-2 in my hard disk and both of them have startWeblogic.cmd in them..
    but i cant run them simultaneously though individually they run.
    they differ by HTTP port and Debug port but still they dont run simultaneously
    can you please comment ?

    yea...i thought about it .
    but as both of them are same application and they are using the same DB connection pool , JMS queue ....i just dont want to mix all these.
    so i have created two seperate domian . and i run them individually and they work fine.
    However , they are having different ports though .
    But when i run the second one while the first one is running ....the second one does not starts up
    here is the error when i click on startsWeblogic.cmd when the other is already running.
    java version "1.4.2_08"
    Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_08-b03)
    BEA WebLogic JRockit(TM) 1.4.2_08 JVM R24.5.0-61 (build ari-49095-20050826-1856-win-ia32, Native Threads, GC strategy: pa
    Starting WLS with line:
    d:\bea\JROCKI~1\bin\java -jrockit -Xdebug -Xnoagent -Xrunjdwp:transport=dt_socket,address=8453,server=y,suspend=n -Djava.
    === Debugging ===
    This window is necessary for debugging code using WebLogic Workshop
    ERROR: Proxy already running...
    weblogic.debugging.comm.TransportException
    at weblogic.debugging.comm.ServerConnectInfo.createTransport()Lweblogic/debugging/comm/CommTransport;(ServerConne
    at weblogic.debugging.engine.ProxyThread.run()V(ProxyThread.java:77)
    at java.lang.Thread.run()V(Unknown Source)
    at java.lang.Thread.startThreadFromVM(Ljava/lang/Thread;)V(Unknown Source)
    Caused by: java.net.BindException: Address in use
    at jrockit.net.SocketNativeIO.bind(ILjava/net/InetAddress;I)I(Unknown Source)
    at jrockit.net.SocketNativeIO.bind(Ljava/io/FileDescriptor;Ljava/net/InetAddress;I)I(Unknown Source)
    at java.net.AbstractSocketImpl.bind(Ljava/net/InetAddress;I)V(Unknown Source)
    at java.net.PlainSocketImpl.bind(Ljava/net/InetAddress;I)V(Unknown Source)
    at java.net.ServerSocket.bind(Ljava/net/SocketAddress;I)V(ServerSocket.java:318)
    at java.net.ServerSocket.<init>(IILjava/net/InetAddress;)V(ServerSocket.java:185)
    at java.net.ServerSocket.<init>(I)V(ServerSocket.java:97)
    at weblogic.debugging.comm.ServerConnectInfo.createTransport()Lweblogic/debugging/comm/CommTransport;(ServerConne
    ... 3 more
    Could not bind to Weblogic server (Error attaching to Weblogic Server.).
    Message was edited by:
    Unknown_Citizen

  • May i can't have Forms+Reports server on the same machine ?

    Gurus!
    I have installed Forms+Reports server on the same machine with their builders too. But then Forms & Reports server does not function when i call my .fmx file in browser the message,
    "Java applet loading" appears but then the process hang up.
    But when only installed Form server my .fmx file works.I also want to call my .rep files from forms.
    May i can not have Forms+Reports server on the same machine?
    Separately they work but not both but i require both how!
    I have also seen when both installed and when i start services of both then ifweb60.exe is called two times in memory, it shows from task manager's process tab.
    Please help!
    Many thanks

    1. Check these files to make sure you have the correct port settings for your forms: formsweb.cfg, base.htm
    2. In your Windows Registry:
    a. Add path for Reports Server (REPORTSxx_PATH)
    b. Make sure you also have FORMSxx_PATH defined
    c. Check values of your OracleFormsServer.
    HKEY_LOCAL_MACHINE
    SYSTEM
    ControlSet001
    Services
    OracleFormsServer
    Verify the values of Host, Mode, Pool and Port.
    3. Check Metalink Note 97487.1 for additional info.
    And YES, Apache, Forms, Reports and Graphics can all run in the same machine.

  • Can I run AE CS4 and CS3 on same system? +Ram Q's

    I haven't been able to teach my motion graphics course in a year so I am behind on AE doings and the state budget cuts cancelled the purchase of my new laptop SO I only have CS3.  I am scrambling to make this course work!!
    Q:  Can I run AE CS3 and CS4 on the same system?  (we have CS4 on some lab machines but some students have only CS3 at home)
    Q:  Blimpo AE CS4 says it needs "2Gb RAM" vs CS3's "1Gb RAM for DV" (our application) - will CS4 even install and start w/o 2Gb?  If so, can one at least do simple, straightforward work with 1Gb or is it hopeless?
    Thanks for any help you can provide.
    Jane at SFSU

    If so, can one at least do simple, straightforward work with 1Gb or is it hopeless?
    "Simple, straightforward work" is very much a matter of definition. As long as we talking basic title, menu and background design at SD resolutions (PAL/ NTSC) or below (web) without resorting to oversized source files, it might work to a degree. I doubt, however, you will ever be abel to do anything remotely HD. Memory errors and warnings will be a constant companion....
    Mylenium

  • How to install the windows7 agent and monitor the same machine

    Hi ,
    I have installed OMS on Oracle Linux 5.7-64 bit machine. Now I am able monitor the OIM which is installed on Linux. I have some of oracle applications (domains) on windows7 machine. I want monitor the same. On em, agent deployment page I am not able to see the windows agents.
    Can you please guide me how to install the agent on windows and monitor the same?
    OEM version: 11.1.0.1
    Thanks in advance
    Regards,
    Kishore Tummeti

    If you just need to install some agents on Windows the best (imho) option is not to use the push option because getting Cygwin to run can take hours (if at all).
    Here you find a good instruction how to install the agent by hand: http://www.peasland.net/?p=122
    Sometimes the –silent mentioned in step 4b needs not to be put as second argument but as last argument.
    Eric

  • Two running instances of Weblogic on the same machine

    I need to run at least two instances of Weblogic on the same machine. My Company GE Capital purchases the Clustered version and the BEA Engineer who did the install did not know Unix and could not intall the instances. Could you please give pointers to on how to do this? You can also write me to [email protected]
    Thanks,
    John G

    ....plus, you have to consider the license issue.
    Vidar wrote:
    >
    It does not sound to bad, but would it not be hard to cooperate with other
    people, since you will often use API's and EJB's developed and deployed by
    other team-members?
    Does anybody have any documents or ideas on what the best way to cooperate
    in a development-team is?
    "Michael Girdley" <[email protected]> skrev i melding
    news:39e15942$[email protected]..
    Yes, that is the best way to do it.
    In practice, we have found that each developer having their ownworkstation
    with an instance of WLS works best.
    Thanks,
    Michael
    Michael Girdley
    BEA Systems Inc
    "newbie" <[email protected]> wrote in message
    news:[email protected]..
    I am also pondering on the same problem right now...
    I am trying to get an environment setup so that multiple
    developers can have their own weblogic "instances" to play
    with - so that each of them can start/stop the server,
    deploy EJBS etc without affecting one another in a UNIX
    environment. to accomplish this - do I just install the
    server multiple times with different port numbers on the
    same machine or is there a a better way to do this?
    Appreciate any input.
    Thanks
    "john Gongora" <[email protected]> wrote:
    I need to run at least two instances of Weblogic on the same machine.
    My
    Company GE Capital purchases the Clustered version and the BEA Engineerwho
    did the install did not know Unix and could not intall the instances.Could
    you please give pointers to on how to do this? You can also write me to
    [email protected]
    Thanks,
    John G

  • Running 2 versions of Apex on same machine

    Hi,
    Had a requirement from my client to run apex 2.0,apex 3.2 and Oracle 10g R2 in a single box.Wanted to check if this is possible.If yes then could some one help me with detailed installation process.If no,then pl justify.
    Looking forward for an early reply.
    Thanks in Advance,
    Such

    1) You can only have 1 APEX installation per database (as Scott said). Need 2 versions of APEX on the same physical machine? You need 2 databases.
    2) 1 Oracle HTTP Server (OHS) can support as many versions of APEX as you need, all on the same port (7777 in your case).
    2.1) Create a new DAD for each install of APEX. So, 2.0 might be at /pls/apex-old-school/ and APEX 3.2 could be at /pls/apex/. "apex-old-school" and "apex" are 2 separate DAD entries in dads.conf / marvel.conf (or wherever your DADs are configured).
    2.2) You need 2 different aliases for the images directory. By default, APEX images are mapped to /i/. The problem is, different versions of APEX need their own images directory and alias.
    2.2.1) So, when you install 3.2, you should define a different image alias than the default, such as /i32/.
    2.2.2) Copy the APEX 3.2 images to a directory on the same machine where OHS is installed.
    2.2.3) Create a new alias in httpd.conf (or wherever /i/ is defined). The alias name should be /i32/ and the directory points to the location of the 3.2 images.
    Good luck,
    Tyler

  • How can I convince iTunes that this is the same machine to avoid installing all my iPod Touch Apps?

    I've had to rebuild my hard drive and reinstall all the software. What a pain.Now iTunes wants to tell me that I am re-syncing from a new machine and wants to reinstall all of my Apps. It is the same machine, and all the Apps show up in iTunes that are on my iPod Touch. I do not want to have to reinstall all of the iPod Apps and try to restore all of their data. How can I convince iTunes that this is NOT a different machine?

    If you are using iTunes version 7 or later, then you can transfer purchased iTunes store music from the iPod to an authorized computer by using the "file/transfer purchases from iPod" menu. Note that the maximum of 5 authorized computers applies here.
    For all other non purchased music (your own CDs etc) try this method which works on some Windows PCs.
    Enable your iPod for disk use.
    See: iPod Disk Use.
    Open iTunes and select edit/preferences/advanced/general. Put a check mark in the box marked "copy files to iTunes music folder when adding to library" and also "keep iTunes music folder organized", then click 'ok'.
    Connect the iPod whilst holding down the shift/ctrl keys to prevent any auto sync, and if you see the dialogue window asking if you want to sync to this itunes library, click 'no'.
    Then go to file/add folder, open 'my computer', select your iPod and click 'ok'.
    The music files should transfer to your iTunes.
    If this doesn't work (and it may not because officially it's not supposed to), check out the instructions/suggestions here.
    Music from iPod to computer (using option 2). This a manual method using "hidden folders" and although it works, it can be messy.
    Much easier ways are to use one of the many 3rd party programs that copy music from the iPod to the computer.
    One of the most recommended is Yamipod. This is a free program that transfers music from iPod back to the computer. However, it does not transfer playcounts/ratings etc.
    Another free program is Pod Player.

  • Can you share to other users on the same machine?

    If I have 2 users on the same machine, and I log in with one user, open iTunes, then swich user and bring up iTunes. Will the second user see the shared shongs from the first user?
    Thanks,
    Alfredo

    Here is what I did:
    1. Create new user account.
    2. Open iTunes
    3. Set preferences to NOT copy files over on an import.
    4. Set the location for my music library to the "Public" folder (created an iTunes folder in there and pointed to it).
    5. Selected "Add to Library" and selected the top level folder where my songs are (an mp3 folder on my firewire drive)
    6. Since my son had some songs of his own that he exported from Garageband, I went back the the preferences and checked the "copy files on import", then selected "Add to Library" on those files. NOTE: if you do this, you may want to exclude that directory in step 5 above.
    The reason I used Public/iTunes as the output folder, was so other account could import those files to their iTunes in the future.
    Alfredo

  • Can we install OBIEE 10G and 11G on Same Machine

    Hi Experts,
    I want to install OBIEE 11 G on the same machine(Windows) which already have OBIEE 10.1.3.4. So is it possible.
    I dont want to upgrade at this stage.
    Thanks

    No problem if you give a different port number.
    regards
    John
    http://obiee101.blogspot.com

  • How can I sync over itunes and at the same time sync over icloud?

    Hello,
    I just recently updated my iTunes to the latest version and now run into the following challenge. With the "old" iTunes I was able to sync my Outlook calendar from my company computer over iTunes with my iPhone and my iPad. At the same time I was able to sync my private appointments on my iPhone over iCloud with my iPad. That way my appointments from my company computer appeared in a different color on my mobile devices as my private appointments and everything was fine.
    Now, after updating iTunes, I cannot sync my Outlook calendar from my company computer anymore - iTunes is just telling me I choose to sync my calendar over iCloud and leaves me no option anymore to sync "manually" in addition to the iCloud with iTunes.
    How can I solve the issue? Basically, how can I sync my company appointments with my iPhone without using iCloud on my company computer?

    Hi,
    I have the same issue and I can tell that it really *****. Now I have to manually copy cal items to my icloud calendar to have the business cal items on my iphone.  have looked into codetwo for icloud which is nice for notes, tasks and contacts but it only works for business cal items which I myself have created not for items for which I was invited. Contacted their support but I think it won't help.
    If you have any suggestions how to overcome this problem, I'd be glad if you posted your solution.
    Thx in advance
    iphone 5, iOS 6.0.1, icloud for windows 2.1, windows 7 64bit

  • Can I run 2 wireless networks on the same single internet connection?

    I wanted to be able to use only my WRT350N to be able to broadcast "N" out into the yard but because it does not broadcast as far as the WRT54G I will have to settle on plan B.
    I want to set up two wireless networks using my WRT54G V1 with a WSB24 and my new WRT350N wireless routers.
    My last working setup was:
    WRT350N with two 1Gb connections to my desktop computers in ports 1 & 2, my link to the WRT54G in port 3 and my HP printer in port 4. The address was changed to 192.168.1.50 and an encryption key used to secure the connection the N network to my laptop.
    WRT54G with only the WSB24 connected to provide an unsecured 802.11g wireless connection. We live in the country and I am not worried about unauthorized access to this.
    I have found that I can not make a stable wireless connection from the WRT350N past 50 ft. in the house and can not get a connection from this router out of the house. (hence the reuse of the WRT54G)
    Still following?
    My older router (WRT54G V1 and WSB24) allowed me to roam our yard out to about 175ft from the antennas with the 3945 Intel wireless adapter that is in my Gateway laptop. When I purchased the WUSB300N adapter for the "N" connection, I am able to get a 17% "G" signal in one of the outer buildings at about 200 ft from the WRT54G and not stable connection from the WRT350N past 50ft.
    I was able to run the WRT54G as a gateway after changing its address to 192.168.1.51 and leaving the WRT350N at 192.168.1.50 before I updated the WRT350N to v1.03.6 last night and turned it into a brick.
    That is talked about in a different thread.
    This setup allowed me to connect to the internet outside of the house with the laptop.
    Is there a better way to set this up?
    Thanks for your help.
    Message Edited by PapaBare on 08-24-2007 11:49 AM
    Message Edited by PapaBare on 08-24-2007 12:12 PM

    If I understand your request correctly it sounds like you want to create a VLAN, two different logical networks on the same physical network. If that's the case however, it would seem that neither the WRT54G nor the WRT350N supports VLAN, at least not without flashing the firmware on one or both of the devices. If you do choose to pursue flashing the firmware with third-party firmware that supports VLAN you might want to look into DD-WRT, HyperWRT, or some other firmware. Keep in mind flashing with third-party firmware voids your warranty with Linksys.
    "Everybody save your work.......NOW!!"

  • ITunes match says "matched" I delete the song to download better version and get the same bit rate

         HI,
    title says it all. :-) I made a smart playlist to filter out the tracks that I can upgrade to a better version. This worked well for most of my library but there are a couple of songs that are listed at 128kbps. I delete these and then click on the cloud icon. While downloading itunes lists them at 256 but then revert to 128!
    A bug? Should I report it or are other users having the same problem?
    Cheers,
    Philly

    Generally setting a common Album title and Album Artist will fix things.
    For deeper problems see Grouping tracks into albums.
    tt2

  • Since 10.8.3 update I can't run Java - have other people the same problem?

    Does 10.8.3 not support the latest Java version? It tells me "inactive plug-in".
    Does anyone know how to fix this problem? Or do I need to wait until Java comes up with a new version

    No, it has nothing to do with being Friends or not.
    There are more and more security issues with java, Oracle comes with updates almost every few weeks. Until lately Apple had it in theuir distribution system, but because of the security issues decided that it was not good business to distribute automatically this leaky system. So with new system updates the Java is removed to make sure the customers reinstall the latest version. You can download from both Oracle and Apple, but don't download from any other source.
    Luckily I do not need it anymore and have not installed Java since a few months.

Maybe you are looking for

  • Cost element 7000218 is not assigned to a cost component in CostCompStruct

    Dear All, How to change the standard price in MR21 for materials with Price Determination Control 3 ( header level V & 3) (Split level S & 3) In MR21, when I am updating the price for initial stock uploading. It throws me a error Cost element 7000218

  • Mail files on server and webmail view don't match

    Hi there, First-time poster... sorry if this has been addressed ad infinitum. We are running Msging Server 6.2-6.01 (according to 'imsimta version'). I have a problem with a user's account. The account has a mailQuota of 20Mb, of which about 89% is c

  • Lightroom/Elements Help/Updates won't link to web

    I have Lightroom 5.6 64 bit and Elements 12 installed on two Windows 7 computers - one is my work and the other my personal  home computer.  At some point the versions on my home computer stopped linking to the internet when I select a Help function

  • Can't Open Mail after security update 10.6.8

    I can not get the mail app to run.  This is the error message I keep getting. Did the SecUpd2012-004 update. After the update, I had (and still have) 2 copies of mail in my application folder. I've repaired my permissions. Tried to got back using the

  • Healthcheck in OEM Console

    I'm running OEM 9i and I have a simple DG setup with primary and one physical standby. In the Data Guard Manager GUI window, there is a tab for Properties that allows you to set a Health Check. As I understand it, this is suppose to cause a query of