Can I run Exchange 2013 Schema more than once

I have started in installing Exchange 2013. I ran schema update using the Exchange 2013 RTM. Should I go ahead and install Exch2013 RTm and just run the updates afterwards or should I run schema update again using the Exch2013 SP1 setup.exe?

Exchange 2013 CU5 is the latest one so if you haven't installed Exchange yet, I would suggest you to run the schema update again for
CU5 and then install instead of installing RTM first...
But if something is blocking you to run Schema upgrade again currently then you can go for Exchange 2013 RTM install too, only thing is you would end up spending double time installing and upgrading and fighting with known bugs between RTM and CU5...
Blog |
Get Your Exchange Powershell Tip of the Day from here

Similar Messages

Can you run the Import Wizard more than once at the same time?

We're going to run the Import Wizard to import content from one BO environment to another. Can we, at the same time, run the Import Wizard to import different content between those two environments (using the same source and destination both times)? Obviously we'd have to run the wizard on different workstations.
Would this cause any issues? If so, what kind of issues would you expect?
Thanks,
Laura

Yes, this is possible. The source and destination CMSs treat the requests from the Import Wizard like any other -- increasing the number of active Import Wizard sessions just increases the load on these CMSs. Before running multiple Import Wizard sessions, be sure there is ample processing power (CPU / memory) to handle the increased load. and of course, avoid 'touching' the same content in the two sessions in order to avoid unpredictable results.
-Mike

HT204370 Can I rent the same movie more than once?

Can I rent the same movie more than once?

Yes, as long as you do so within the 24/48 hour period.
(73178)

HT1657 Can I watch the rented movie more than once?

Can I watch the rented movie more than once?

Yes, as long as you do so within the 24/48 hour period.
(73178)

How can I add the same song more than once?

how can I add the same song to my ipod shuffle more than once?

Thanks. I tested it, and found that I can create a bookmark in FolderA, and them manually copy it to FolderB, FolderC, and FolderD.
Once that is done, I tried the old method of "Bookmarks" --> "Bookmark This Page" and added it to FolderE. When I did that, it deleted the copy in FolderD but left the other three alone!
This is fine with me. I personally think this is a bug, because I don't think that Firefox should ever delete a bookmark without asking me (or at least, informing me). But now that I understand the algorithm, I can work around it. Thanks!

My macbook pro is running slow and freezing more than once a minute.

I do not know much about computers, but I do know this is not normal for my computer.
Processor 2.9 GHz Intel Core i7
Memory 8 GB 1600 MHz
Graphics Intel HD Graphics 4000 1024 MB
Software OS X 10.9.5
So about two days ago I was using the computer and noticed that it was freezing and giving me the little spinning circle of evilness. This happens every time I open anything, try to type(which is making this an extremely long process), load a screen in the MMORPG I play(Or even just general play time). I can be doing anything, and the computer will freeze for anywhere between 5 seconds, and up to 10 minutes. Things normally continue on fine, or sometimes my internet screens fail to load. I have ran ccleaner and cleaned up a few things, and then ran AVG which found quite a few files or something called Genio which I deleted. I have also upgraded all the latest updates that I can, but now when I try to open the app store to double check to see if there are any more updates, and it will not open, it freezes. I have reset my comps system management controller, and I have reset my PRAM. My desktop is not cluttered, and I'm more confused than ever.
If there is any more information I can give, I will try. Please help??

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
The test works on OS X 10.7 ("Lion") and later. I don't recommend running it on older versions of OS X. It will do no harm, but it won't do much good either.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of it have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message. See, for example, this discussion.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a general summary of what you need to do, if you choose to proceed:
☞ Copy a particular line of text to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
These are not specific instructions; just an overview. The details are in parts 7 and 8 of this comment. The sequence is: copy, paste, wait, paste again. You don't need to copy a second time.
5. Try to test under conditions that reproduce the problem, as far as possible. For example, if the computer is sometimes, but not always, slow, run the test during a slowdown.
You may have started up in "safe" mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. Load this linked web page (on the website "Pastebin.") The title of the page is "Diagnostic Test." Below the title is a text box headed by three small icons. The one on the right represents a clipboard. Click that icon to select the text, then copy it to the Clipboard on your computer by pressing the key combination command-C.
If the text doesn't highlight when you click the icon, select it by triple-clicking anywhere inside the box. Don't select the whole page, just the text in the box.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Click anywhere in the Terminal window to activate it. Paste from the Clipboard into the window by pressing command-V, then press return. The text you pasted should vanish immediately.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. If you don't know the password, or if you prefer not to enter it, just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, a series of lines will appear in the Terminal window like this:
[Process started]
        Part 1 of 8 done at … sec
        Part 8 of 8 done at … sec
        The test results are on the Clipboard.
        Please close this window.
[Process completed]
The intervals between parts won't be exactly equal, but they give a rough indication of progress. The total number of parts may be different from what's shown here.
Wait for the final message "Process completed" to appear. If you don't see it within about ten minutes, the test probably won't complete in a reasonable time. In that case, press the key combination control-C or command-period to stop it and go to the next step. You'll have incomplete results, but still something.
12. When the test is complete, or if you stopped it because it was taking too long, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "The message contains invalid characters." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak for themselves, not for me. The test itself is harmless, but whatever else you're told to do may not be. For others who choose to run it, I don't recommend that you post the test results on this website unless I asked you to.
Copyright © 2014, 2015 by Linc Davis. As the sole author of this work (including the referenced "Diagnostic Test"), I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Can I use the CD key more than once?

I bought Lightroom as a Christmas present for my husband this year, but his laptop was stolen recently. It will be a few months before we can afford getting him a new one, and I want him to still be able to use Lightroom until then, so I was considering installing it on my computer, if it will do so (my computer is getting a bit old). But I don't want to do that unless he'll still be able to use the CD key to install it on a new laptop once we get him one. I've never had to worry about installing software on more than one computer, so I'm not completely sure of myself here. Any advice?

LR’s license, like most Adobe products’ licenses, is for one person on two different computers, with a desktop and a laptop or a work computer and a home computer being the typical examples, as long as only one of those computers is used at a time.

Unity Guru's - Can I automatically sync WMI's more than once a day?

Hey guys, I been fighting this new Unity/Microsoft MAPI/CDO bug (CSCti70702)/ KB2405611) with my Exchange 2010 servers. One of the symptoms is sporadic MWI on/off triggers to CM. So I’ve had to manually sync the MWI’s via the Telephone Integration Manager. Can anyone think of a way to run a resync job every x number of minutes until Microsoft can get this fixed? The TIM will only do it once a day.
Thanks everyone!

When I mention flooding the ports, I brought that up since I've seen any number of Unity systems (large and small) in production environments and have helped a number of users here in the forum that do not dedicate ports to MWI. Instead, it's not uncommon to find situations where all ports are set up to do everything. So, it's good that you've at least got some ports dedicated to MWI. Honestly, if you have 900 subscribers and over 96 ports - you would never run into this anyway. I've done installs where there are 4000+ users that only have 96 ports ... so no worries there.
The scenario you're talking about makes sense. Ideally, no - you wouldn't need to mass reset the MWI on a healthy Unity system other than the scheduled UTIM operation. In your case, sounds like it is warranted as a short-term tactical solution to a problem that is identified and not yet fixed. However, as you know the UTIM only does this once a day and I do not know of any other way to schedule or invoke the resync operation outside of the manual method you are using now.
Hailey

Run Smart Index Wizard more than once?

Afternoon all,
RH8 generating WebHelp.
Quick question on how the Smart Index Wizard works. I've run it once, made no changes to any topic, ran it again and got many more entries added to the Index.
So, should one run the Smart Index Wizard multiple times? Until it says no more entries found?
Is it adding entries the second time based on the existing Index entries it's already created?
Thanks for any light you can shed...
Patrick

Colum,
Thanks for the reply. I'm rapidly coming to the same conclusion about the Smart Index Wizard. It looks like, if "Find New And Existing Index Keywords" is selected, the wizard will add keywords based on topic content AND existing index entries. This would explain why the wizard finds new words each time it's run.
My multiple runs of the wizard on my small project resulted in 6448 entries added the first time, 4191 the second, 154 the thrid and 69 entries added the fourth. Seems like it picks up nearly every word and phrase outside of the ignore list.
A lot of what the wizard puts out is clearly useless. The wizard is also not as useful as it could be since it filters on topic Status and not CBT. Howver, I've saved off the .hhk file as I do like to peruse it for words I've missed and suggested phrases. It's also good to give you a veiw of just how many places a word or phrase is being used - helps me to see how common it is and whehter I want to include it or not.
Patrick

How can I bookmark the same site more than once?

I have a large number of bookmarks, organized into many folders.
Sometimes I want two copies of the same bookmark, in different folders. But Firefox 3 does not seem to permit this. If the bookmark already exists, in _any_ folder, adding it to a different folder deletes the earlier copy.
REPRO: Go to a page with a fixed URL. Choose "Bookmark This Page", select FolderA in your bookmark folders, and press Done. Now choose "Bookmark This Page" again, and this time choose FolderB. EXPECTED RESULT: The page in question should now appear in both FolderA and FolderB. ACTUAL RESULT: The page is in FolderB, but _not_ in FolderA.
Is there any way to avoid this? I use folders to save myself a lot of time. For example, when I need to work on a paper for one of my classes, I go to the appropriate bookmark folder and choose "Open All in Tabs". When I want to work on a different class, I go to a different folder and choose "Open All in Tabs." But I am unfortunately prevented from placing a site in both folders!

Thanks. I tested it, and found that I can create a bookmark in FolderA, and them manually copy it to FolderB, FolderC, and FolderD.
Once that is done, I tried the old method of "Bookmarks" --> "Bookmark This Page" and added it to FolderE. When I did that, it deleted the copy in FolderD but left the other three alone!
This is fine with me. I personally think this is a bug, because I don't think that Firefox should ever delete a bookmark without asking me (or at least, informing me). But now that I understand the algorithm, I can work around it. Thanks!

Can I fetch files from Ideas more than once

I read that I can group ideas files into projects using folders after I had fetched files in Draw.
Can I fetch ideas files again?

Hi,
The "Fetch All Files" functionality under the Settings\Manage Files option is to perform a "one time fetch" and bring files from previous versions of Adobe Ideas into the project organizer in Draw.
Hope this helps,
Jose

Can you download OSX Mountain Lion more than once on your computers after paying the $19.99

If I purchase mountain lion on my itunes/app store account, can I use that same account on my other mac to download mountain lion without paying another $19.99? I am currently waiting for my email for a free copy but If i can do multiple downlaods without paying extra, I would rather purchase it so I can download mountain lion on my ineligible computer and my newer one too

yes, you can install ML on all the macs you own as long as you use the same Mac App Store ID singing into each of them.

Can I use a credit card more than once to create an apple/iTunes account?

Because I want to create an account but I need a credit card. So I'm planning to use my sisters and then change it afterwards when I select the NONE option for a credit card!!!

See Here for
Changing Account Information
http://support.apple.com/kb/HT1918

Flash form error, can't use the same name more than once? need workaround

I've always written my forms to have multiple buttons, one
for updating and one for deleting. so in html I would do this:
<input type=submit name=action value=Update>
<input type=submit name=action value=Delete>
so I'm trying the same thing with flash forms in cold fusion:
<cfinput label="Update" name="action" type="submit"
value="Update">
<cfinput label="Delete" name="action" type="submit"
value="Delete">
but now I get this message:
2 Errors found.
Error /index.cfm:334
id 'action' was already defined on line 333
Error /index.cfm:335
id 'action' was already defined on line 333
Is there a way to make this work or do I have to either
create a special action_delete or a new form? I'd like to keep the
logic the way I like.
Any suggestions?
Thanks,
John

I was hoping to do logic like this
<cfparam name="action" default="list">
<cfif action equal "list">
<cfelseif action equal "update">
<cfelseif action equal "detail">
<cfelseif action equal "delete">
</cfif>
So I just converted everything to html and things work the
way I like. thanks anyway. The forms don't really buy me anything.

Can I use a credit card more than once to create an natures

Ok so i

Sorry please ignore this., I messed up....kinds new to iPad so I accindently enter this wrong question!!

Can I run Exchange 2013 Schema more than once

Similar Messages

Maybe you are looking for