Can I see Labview discussion Forums in Outlook Express

Hi all,
I want to see the Discussion Forum of Labview through Outlook Express.I have Windows XP as OS.
plz help
Thanks in advance
--sattu

Procedures vary depending on OE version, but here are the general instructions. If your computer is not too customized, you can go there directly, just click the following link
-----newsgroups.ni.com -----.
Manual instructions:
Open Outlook Express and go to "tools...accounts".
Click [Add...] --> News...
and finish the wizard with relevenat entries:
Display Name: Your real name or an alias.
e-mail address: your e-mail address (or a fake, ending in .invalid if you want to keep it private or are worried it gets harvested).
News server: newsgroups.ni.com
Finish the wizard.
Now select newsgroups.ni.com and press "Newsgroups..." and subscribe to whatever you desire. You can also
"go to" any newsgroups without subscribing.
LabVIEW Champion . Do more with less code and in less time .

Similar Messages

Forum in Outlook Express

I would like to know how could I access this forum from
Outlook Express. Thanks.

Hi RB2005
You might click the Profile link up above and change your
profile. You may have forum messages delivered to your In-Box this
way.
Additionally, it's rather long in the tooth, but once upon a
time I put together a guide for these forums. You might be able to
glean something from it as well. You may visit a page where you can
download it by
clicking
here.
Cheers... Rick

Can't see LabVIEW Colour Picker (Evaluation 2014 for Mac)

Hi all,
I am new to LabVIEW, and am trying to make a chart I made appear transparent. According to http://forums.ni.com/t5/LabVIEW/Using-LabView-s-Color-Picker/m-p/575619/highlight/true#M269839, the colour picker is available as one of the numeric controls, however I can't see it in there, nor by shift and right mouse click, nor within the tools menu. I have attached a screenshot of what I see. Is anyone able to help me please?
Solved!
Go to Solution.
Attachments:
Screen Shot 2015-02-07 at 7 Feb 2015 15.48.01.png ‏375 KB

"Context-clicking" is the generic, non-platform-specific term used to describe how to get a contextual menu to pop up on a node. On Windows this is commonly called right-clicking. On the Mac it can be accomplished by control-click. I am not sure what Linux uses.
After you have run the VI the color box control is no longer visible. From the block diagram context-click on the terminal. In the menu which pops up choose "Show Control" which will be about 1/3 down the menu. This will bring the front panel forward with the color box control positon (probably behind the chart) shown by dashed lines. If you cannot move it by clicking on it with the arrow cursor, then use the keyboard arrow keys to slide it out from behind the chart. Once is is exposed on the front panel, context click on the control and choose "Allow Transparent" from the pop-up menu (near the bottom of the list). Then the next time you run the VI the "T" box in the upper right corner of the color picker box should be available.
The Pop-Up_Color_Dialog.vi was written to be a simple demonstration of how to get access to the color picker. If you want to make is usable as a subVI, you need to associate the indicators or controls on the front panel with terminals on the connector pane. You do that by clicking on the conpane with the wiring tool cursor and then clicking on the control/indicator you want connected to that terminal. You will also need to find a way to stop that subVI. As long-time Forum particpant Ed Pickens has said, "Using the Abort button to stop a running VI is like using a tree to stop a car. It works but may have undesired consequences." I am not sure how you want to use that subVI (or whether you even really want a subVI), so I cannot tell you what changes to make.
That subVI has a chart but it appears that you probably want a graph. You might be better learning how the subVI works and applying the process to the graphs you already have.
Lynn

Can't see old discussions i started before update

i can't see the old discussions i started in the activity stream. i only see those that i made or replied to after the update to the discussions forum. please help me locate my threads.
Neerav

They should be listed on this page (by clicking on your id) : AceNeerav

Can anyone recommend a Discussion forum that works with SSO?

Hey,
For a medium sized customer we are in the process of trying to find a discussion forum that they can use.
I was wondering if anyone have any other discussion forums, free or not, that they have implemented and works good with SSO and access restrictions?
We need to implement access restriction based on oracle application server user groups, and have SSO sign you in both to the discussion forum, and to the portal in general.
Grateful for any answers,
Sayeeas

Hi MHaddox
And welcome to apple discussions. LaCie is actually one of the better S-Drives for mac in terms of an external burner (at least from reading this forum). However, I haven't seen too much posted in terms of the Lightscribe feature itself. Perhaps one or more of these links will help (if not just come on back):
http://www.opendrivers.com/driver/293518/lightscribe-system-software-1.18.8.1-ma c-os-x-free-download.html
http://www.lacie.com/products/product.htm?pid=10096
http://www.lightscribe.com/downloadSection/mac/index.aspx?id=813
http://www.lightscribe.com/downloadSection/mac/index.aspx?id=852
http://www.versiontracker.com/macosx/drivers/cd-dvd
Good luck on this.
Disclaimer: Apple does not necessarily endorse any suggestions, solutions, or third-party software / products that may be mentioned in this topic. Apple encourages you to first seek a solution at Apple Support. The following links are provided as is, with no guarantee of the effectiveness or reliability of the information. Apple does not guarantee that these links will be maintained or functional at any given time. Use the information above at your own discretion.

How Can I Delete my DIscussion Forum Account?

I would like to delete my discussion forum account. I cannot seem to find a method to do this.
Is there a way? Thanks.

Not as far as I know. Just don't use it.

Is there any other forums like OutLook Express?

I like to use OutLook Express forums discussion very much, that can make me discuss everything without opening a new web site, is anybody tell me the News Group Address?Thanks a lot.

Since performance may be an issue when hitting BSEG table
Any of the below accounting tables can be used.
1.BSAD
2.BSAK
3.BSAS
4.BSID
5.BSIK
6.BSIS
These are normal database tables, not clusters. Normally every record from BSEG can be found in one of these 6 tables. The program which selects data
From these tables runs faster than from BSEG.
Plz reward if helpful.
Thanks.
Ramya

Can't see table data from Visual Studio Express 2013 for Web

Hello!
I have a problem and I can't see neither the table data nor the table definition for my database inside Visual Studio Express 2013 for Web, Server Explorer. When I right click it just says refresh, copy or properies.
Does anyone know what's wrong?
Thanks a lot!

Hi J1m,
According to your description, I make a test on my computer and I am able to reproduce your issue. Firstly, I install the Visual Studio 2013 express for web successfully, create a project and connect to SQL Server database. Then I right click one table,
and I can see all the options including ‘Show Table Data ’, ‘Open Table Definition ’, ‘Copy’, ‘Refresh’, and ‘Properties’. Next, I uninstall the SQL Server data tools, and restart the Visual Studio, right click on table, and only find the three options
‘Copy’, ‘Refresh’, ‘Properties’ as the following screenshot, which is the same scenario with yours.
Based on my test, the issue could be due to the missing or corrupt SQL Server Data Tools. To work around the issue, you should install the latest SQL Server data tools for Visual Studio 2013. You could download the
ISO file for SQL Server data tools and extract the ISO files to your hard drive following the methods in this
article, and install the data tools. Please restart your computer after you complete the installation.
Regards,
Michelle Li

How can I see all devices using my airport express?

Is there any way to see all devices using my airport express for wifi connection?

Open Macinotsh HD > Applications > Utilities > AriPort Utility
Select the AirPort Express and click on Manual Setup
Click directly on the word Wireless Clients about 2/3 of the way down the page to see the MAC Address of each connected device along with the IP address that has been assigned.
You will need to do a bit of experimenation to be able to identify which device is which based on the MAC address.
Disconnect all but one device and note the MAC address. You now know that product that is.
Turn that one off and connect another. You now know what that device is, etc.
If you have 4 wireless devices...and you see 5 connected devices.....you may have an unwanted guest.

Labview Discussion Forum Promotions

Hey everybody! Just trying to figure out how many replies I need before I can level up from Proven Member to Proven Regular? How many experience points do I get for one reply or for one new thread? Also, once I finally level up does this give me any new powers or abilities? For instance, when I do finally level up do I get the special ability to be able to write a .VI in a single try without errors? 'Cause that'd be kinda cool...
Trying to figure out the quickest way to labview stardom,
Jonathan

You might want to look at the two forums, Breakpoint, and Feedback on NI Forums, under the Special Interest Boards section. There have been a number of discussions about the rating system and the link to a FAQ (which I don't remember at the time). Roughly it is 50 replies to reach the first transition, 2000 to become an "Enthusiast", but I don't remember the other levels at the moment. You do get community accolades when you break 1000, and we have one very helpful and prolific submitter that is now 5000+! (I'll let you determine who that is).
P.M.
Putnam
Certified LabVIEW Developer
Senior Test Engineer
Currently using LV 6.1-LabVIEW 2012, RT8.5
LabVIEW Champion

Can't see choices in forums or chat with tech support

When I put a search in the forum and go to choose which discussions to search the menu list pops up but I cannot see the items - they are there but very faint.
When I tried to chat with tech support I could not see what I was typing, although the cursor moved and when I sent my message it showed up.
Need to fix this.
Betty

I gave up and called.

Changing my data! Scary! Can't see apptmt items on pc Outlook either!

Major bug! My data on my PC keeps changing when I sync my iPhone 3G. It changes people's birthdays (yet it's always correct on my iPhone), it deletes past appointments on my PC (yet they show correctly on my iPhone) and if I add or change an appointment on my iPhone it will NOT show on my PC (yet it is there as it does show on my PC when I change my Outlook calendar view to category view...but it won't show under the normal day/week/month view).
What the heck is going on? I need everything to be correct on my PC always...not my iPhone (it would be great to have BOTH correct...isn't that how it's supposed to be?). Everyone in my house refers to my PC's Outlook to go by for events, appointments, etc. That's why my PC must always be the correct item, not my iPhone.
Help!

Just to respond to the comment above.
Disk formatting and disk access security are two different thing.
An Airport disk can be formatted as HFS+ and both Macs and PCs will be able to access it.
Regarding "Security" which you setup on the Airport Extreme there are two option:
a) "Secure Disks: With accounts": Here each user on your network will only be able to see and access the folders and files they uploaded to the Airport disk themselves. The disk (as hardware) is shared but data is not shared.
b) "With a disk password": Here all users on your network will be able to see and access all folders and files on the Airport disk.
I hope this makes things a little more clear.
Karsten

Suddenly can't sign into Twitter and can't see answer on forum.

I was prompted to update Firefox and problem seemed to start then.
Used safe mode - worked once but not now.
Done reset but no difference.
Tried all suggestions I can find (cache, firewall, etc.) and none seem to make any difference.

Clear the cache and cookies only from websites that cause problems.
"Clear the Cache":
*Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox/Tools > Options > Privacy > "Use custom settings for history" > Cookies: "Show Cookies"
You can remove all data stored in Firefox from a specific domain via "Forget About This Site" in the right-click context menu of an history entry ("History > Show All History" or "View > Sidebar > History") or via the about:permissions page.
Using "Forget About This Site" will remove all data stored in Firefox from that domain like bookmarks, cookies, passwords, cache, history, and exceptions, so be cautious and if you have a password or other data from that domain that you do not want to lose then make sure to backup this data or make a note.
You can't recover from this 'forget' unless you have a backup of the involved files.
It doesn't have any lasting effect, so if you revisit such a 'forgotten' website then data from that website will be saved once again.

How can I import my address book from outlook express.

I just got my first iPad and set up my email account. However, I don't see any way to import my address book. How do I do this, as my address book on my windows based computer (outlok express). Thanks for your assistance!David

You cannot. iTunes syncing of contacts is only supported through Outlook

After changing a mail list name in Server end, users can't see the update in outlook client

Dear all,
This is a real issue. I am a Help-desk in a global company and after changing a mail list name in Server end, users can't see the update in outlook client. Even I download Offline address book in full detail, user still can't see the change in her outlook.
Does anyone know how to fix it?
Thanks,
Franklin hong

Hi,
Would you please detail what you did by "changing a mail list name in Server end"? What is the mail list and what server?
If you switch to Online Mode instead of Cached Exchange Mode, does the user see the change?
Regards,
Melon Chen
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Can I see Labview discussion Forums in Outlook Express

Similar Messages

Maybe you are looking for