Can I set default colors for generated shapes in Premiere Pro CC?

I'm working on some highlight video where I need to generate an ellipse on each clip to highlight a player. I'd like to use a yellow/yellow, 20% softness, 8 thickness ellipse each time, but by default PP gives me an ugly green/blue combination, and I have to change the inside/outside colors, softness and thickness each time I add a clip and generate an ellipse.
Is there a way to set a default inner/outer color, thickness, and softness setting for each new generated shape so that I don't have to keep repeating these steps?

If you are using the Title Designer to generate your ellipse, and if I understand what you want, the answer is yes.
Unless I am completely off-base, your default font style below the title has the colors of that ugly green/blue combo.
You can easily just set the ellipse the exact way you want it, and then go into the Font Styles menu and create a new font style. Give it a unique name like "Ellipse" and then drag that new style from the end up to the beginning of the list. (Upper left hand corner).
I created an ellipse using a greenish yellow, rather unattractive color for both the shape and the stroke. I used a higher opacity because it shows up better in the screen shot, but I could have set it for 20% easily enough. I then went to the styles menu, created a new style, gave it a name, then went to the last style and dragged it up to the top left where you see it now. You have to look close.
It is not particularly obvious that the shapes are based on the font style just as much as the text is.

Similar Messages

How can I set default values for Allocate Mode in AO config?

Hi, How can I set default values for allocate mode in AO config. To be specific, in the attached vi, I need to set the Allocate Mode in AO Config to 'Use FIFO Memory (6)' if the value inside my case structure is false and to 'no change (0)' if the value inside the case strusture is true.
Solved!
Go to Solution.
Attachments:
generateWaveformFIFO.vi ‏15 KB

Create two constants for the Allocate Mode input (right click > create > constant). Place one in the true case of the case structure, and place the other one in the false case. Wire them to the same tunnel (border of the case structure), then wire the tunnel to the Allocate Mode terminal of the AO Config. I don't have Traditional DAQ installed, but that should do it.
Misha

How do I set default colors for XY chart series (lines and legend)

I am implementing a line chart and need to override the default (caspian style) colors for the line colors and the legend symbols. I'm not displaying the chart symbols themselves as that would make the chart look bad. I've been able to successfully set the default colors for the lines via the CSS below, but cannot find a way to do the same for the series symbols that appear in the chart legend. How do I do this? Thanks.
.default-color0.chart-series-line {
-fx-stroke: rgb(0, 102, 255);
.default-color1.chart-series-line {
-fx-stroke: rgb(0, 255, 102);
...Update:
Figured it out. Need to do the following:
.default-color0.chart-line-symbol {
-fx-background-color: rgb(R, G, B);
}Edited by: 998038 on May 16, 2013 4:09 PM

Here is some css to customize the line and legend colors in a line chart.
/** file: chart.css
    place in same directory as LineChartWithCustomColors.java */
.default-color0.chart-series-line {
-fx-stroke: rgb(0, 102, 255);
.default-color1.chart-series-line {
-fx-stroke: rgb(0, 255, 102);
.default-color0.chart-line-symbol {
-fx-background-color: rgb(0, 102, 255), white;
.default-color1.chart-line-symbol {
-fx-background-color: rgb(0, 255, 102), white;
}And a test harness to try it:
import javafx.application.Application;
import javafx.event.*;
import javafx.scene.Scene;
import javafx.scene.chart.*;
import javafx.scene.control.*;
import javafx.scene.input.*;
import javafx.stage.Stage;
public class LineChartWithCustomColors extends Application {
    @Override public void start(final Stage stage) {
        stage.setTitle("Line Chart Sample");
        //defining the axes
        final NumberAxis xAxis = new NumberAxis();
        xAxis.setLabel("Number of Month");
        final NumberAxis yAxis = new NumberAxis();
        //creating the chart
        final LineChart<Number,Number> lineChart =
                new LineChart<>(xAxis,yAxis);
        lineChart.setTitle("Stock Monitoring, 2010");
        lineChart.setCreateSymbols(false);
        //defining a series
        XYChart.Series series = new XYChart.Series();
        series.setName("My portfolio");
        //populating the series with data
        series.getData().setAll(
          new XYChart.Data(1, 23),
          new XYChart.Data(2, 14),
          new XYChart.Data(3, 15),
          new XYChart.Data(4, 24),
          new XYChart.Data(5, 34),
          new XYChart.Data(6, 36),
          new XYChart.Data(7, 22),
          new XYChart.Data(8, 45),
          new XYChart.Data(9, 43),
          new XYChart.Data(10, 17),
          new XYChart.Data(11, 29),
          new XYChart.Data(12, 25)
        lineChart.getData().add(series);
        //adding a context menu item to the chart
        final MenuItem resizeItem = new MenuItem("Resize");
        resizeItem.setOnAction(new EventHandler<ActionEvent>() {
          @Override public void handle(ActionEvent event) {
            System.out.println("Resize requested");
        final ContextMenu menu = new ContextMenu(
          resizeItem
        lineChart.setOnMouseClicked(new EventHandler<MouseEvent>() {
          @Override public void handle(MouseEvent event) {
            if (MouseButton.SECONDARY.equals(event.getButton())) {
              menu.show(stage, event.getScreenX(), event.getScreenY());
        Scene scene =
          new Scene(
            lineChart,800,600
        stage.setScene(
          scene
        stage.show();
        scene.getStylesheets().add(
          getClass().getResource("chart.css").toExternalForm()
    public static void main(String[] args) {
        launch(args);
}

How can I set the color for a textfield

Hi all,
I use a textfield and I want to set the color for characters which are typed in the textfield. I didn't find anywhere a solution for this. Do you know how I should implement this?
Thanks

Not possible. If you want this, you'll need to make a custonItem that implements this.

Can you set default values for person/group picker fields? To current user?

Two-part question/issue . . .
Part 1:
In InfoPath 2013 in use with SharePoint 2013, how do you set a Default Value for Person/Group Picker fields? Other field types like Text Boxes have a Default Value section in the Data tab of Properties. There doesn't appear to be any equivalent for
the Person/Group Picker field type in Properties. I'd like to set a default person for a few fields in a form I've created. Is this possible?
Part 2:
The default user I want to set for one of those Person/Group fields is the "current user." I want a user to log into our SharePoint 2013 intranet, load a new form for edit/creation, and have one of the Person/Group fields in that form to
automatically populate this particular user. Is this possible?

Hi Stephen,
You can auto populate your InfoPath farm with current user Name and all other property that you have in your User profile, you have couple of options.
First you can make a secondary connection in your InfoPath form with user profile and can use the UserProfileService.asmx and call the GetUserProfileByName method. Here is the steps you can follow.
http://blogs.technet.com/b/anneste/archive/2011/11/02/how-to-create-an-infopath-form-to-auto-populate-data-in-sharepoint-2010.aspx
Secondly you can use JQuery and SPServices ,
$().SPServices.SPGetCurrentUser function to populate the values with script to achieve the same in this case you no need to use InfoPath form just create simple text type column in SharePoint
list and auto populate it with getting the current user Name from User Profile here is the scripts
<script language="javascript" type="text/javascript" src="../../jQuery%20Libraries/jquery-1.4.2.min.js"></script>
<script language="javascript" type="text/javascript" src="../../jQuery%20Libraries/jquery.SPServices-0.5.4.min.js"></script>
<script language="javascript" type="text/javascript">
$(document).ready(function() {
var userCurrentName = $().SPServices.SPGetCurrentUser({
fieldName: "CurrentUser"
$("input[Title='CurrentUser']").val(userCurrentName);
var userPhone = $().SPServices.SPGetCurrentUser({
fieldName: "WorkPhone"
$("input[Title='Phone']").val(userPhone);
</script>
Krishana Kumar http://www.mosstechnet-kk.com

Can't set default java for Mozilla in java control panel

OK. It was fine before installation of SE 6u5. Now Sun java works ok in IE7 but not in Firefox 2.0.0.8. THe problem is obviously in the java control panel that sun java is set as default java for MS IE, but not Mozilla. Here is my question:
I used to be able to tick BOTH IE and Mozilla. But now, when I tick Mozilla, it accepts but after I click yes to close the control panel and open it again, the tick i just made disappears. (So, it means not accepted as a default java) I did make new installation of Firefox for other reasons. Could it be that something has been messed up by both installations. I have tried to remove the deployment.properties and install JRE 1.6.0_5 again while Firefox is already there, but in vein. Thre is another problem that may be related. I can't use the installer downloaded from the internet. I have to use the installer available in the Documents and Settings\administrator\application data\sun\java\jre1.6.0_05 to install jre1.6.0_5.
Environment: Windows XP pro SP2 with up-to-date Windows updates. Sun java installed: JRE 1.4.2_17, JRE1.6.0_5, and JDK 1.5.0_15.
I need help to know what can I do to make sun java woking with my Firefox again.... Another question: can i uninstall the JRE 1.4.2_17 since I have now JRE 1.6.0_5?
Thanks in anticipation.

You cannot set a default value for this attribute, because by default Identity Sync sets useraccountcontrol to 512.
You can find this default value in the configuration registry (under the ou=services tree on your configuration directory server) and change it to 514. Make sure you restart the Identity Sync services after you update the value.
Bertold

Set Default Color For BarChart YAxis Data Values.

Remove alert
|
Edit
|
Delete
|
Change type
0
I am new to MS Chart. I am drawing a simple bar chart with following code. My chart draws red lines, for my datapoints    (Y Axis), I want to draw, I want to set the color of remaining data points for example for 1st record (i.e. dt1) my jobData
have value 10, my graph shows red line for 10 points, for remaining 20 points I need to show the Green Line and also for the remaining data points. Thanks in advance.
         double[] jobData = new double[] { 10, 3, 4, 5, 2, 0, 2, 3, 0, 1 };
            DateTime dt1 = new DateTime(2015, 3, 17, 8, 30, 0);
            DateTime dt2 = new DateTime(2015, 3, 17, 8, 35, 0);
            DateTime dt3 = new DateTime(2015, 3, 17, 8, 40, 0);
            DateTime dt4 = new DateTime(2015, 3, 17, 8, 45, 0);
            DateTime dt5 = new DateTime(2015, 3, 17, 8, 50, 0);
            DateTime dt6 = new DateTime(2015, 3, 17, 8, 55, 0);
            DateTime dt7 = new DateTime(2015, 3, 17, 9, 00, 0);
            DateTime dt8 = new DateTime(2015, 3, 17, 9, 05, 0);
            DateTime dt9 = new DateTime(2015, 3, 17, 9, 10, 0);
            DateTime dt10 = new DateTime(2015, 3, 17, 9, 15, 0);
            DateTime[] xData = new DateTime[] { dt1, dt2, dt3, dt4, dt5,dt6,dt7,dt8,dt9,dt10 };
            InitializeComponent();
            //Horizontal bar chart
            //Create a chart area and add it to the chart
            ChartArea area = new ChartArea("First");
            chart1.ChartAreas.Add(area);
           // chart1.x = Color.Green;
          chart1.Size = new Size(1000, 700);
            //Create a series using the data
            Series barSeries = new Series();
            barSeries.XValueType = ChartValueType.DateTime;
            barSeries.BorderColor = Color.Green;
            barSeries.ChartType = SeriesChartType.Column;
            barSeries.Color = Color.Red;
            area.AxisX.LabelStyle.Format = "HH:mm";
            area.AxisY.Maximum = 30;
            area.AxisY.InterlacedColor = Color.Green;
            area.AxisY.Interval = 1;
          // chart1.ChartAreas(0).AxisX.LabelStyle.Format = "HH:00"
            barSeries.Points.DataBindXY(xData, jobData );
            //Set the chart type, Bar; horizontal bars
            barSeries.ChartType = SeriesChartType.Bar;
            //Assign it to the required area
            barSeries.ChartArea = "First";
            //Add the series to the chart
            chart1.Series.Add(barSeries);

Remove alert
|
Edit
|
Delete
|
Change type
0
I am new to MS Chart. I am drawing a simple bar chart with following code. My chart draws red lines, for my datapoints    (Y Axis), I want to draw, I want to set the color of remaining data points for example for 1st record (i.e. dt1) my jobData
have value 10, my graph shows red line for 10 points, for remaining 20 points I need to show the Green Line and also for the remaining data points. Thanks in advance.
         double[] jobData = new double[] { 10, 3, 4, 5, 2, 0, 2, 3, 0, 1 };
            DateTime dt1 = new DateTime(2015, 3, 17, 8, 30, 0);
            DateTime dt2 = new DateTime(2015, 3, 17, 8, 35, 0);
            DateTime dt3 = new DateTime(2015, 3, 17, 8, 40, 0);
            DateTime dt4 = new DateTime(2015, 3, 17, 8, 45, 0);
            DateTime dt5 = new DateTime(2015, 3, 17, 8, 50, 0);
            DateTime dt6 = new DateTime(2015, 3, 17, 8, 55, 0);
            DateTime dt7 = new DateTime(2015, 3, 17, 9, 00, 0);
            DateTime dt8 = new DateTime(2015, 3, 17, 9, 05, 0);
            DateTime dt9 = new DateTime(2015, 3, 17, 9, 10, 0);
            DateTime dt10 = new DateTime(2015, 3, 17, 9, 15, 0);
            DateTime[] xData = new DateTime[] { dt1, dt2, dt3, dt4, dt5,dt6,dt7,dt8,dt9,dt10 };
            InitializeComponent();
            //Horizontal bar chart
            //Create a chart area and add it to the chart
            ChartArea area = new ChartArea("First");
            chart1.ChartAreas.Add(area);
           // chart1.x = Color.Green;
          chart1.Size = new Size(1000, 700);
            //Create a series using the data
            Series barSeries = new Series();
            barSeries.XValueType = ChartValueType.DateTime;
            barSeries.BorderColor = Color.Green;
            barSeries.ChartType = SeriesChartType.Column;
            barSeries.Color = Color.Red;
            area.AxisX.LabelStyle.Format = "HH:mm";
            area.AxisY.Maximum = 30;
            area.AxisY.InterlacedColor = Color.Green;
            area.AxisY.Interval = 1;
          // chart1.ChartAreas(0).AxisX.LabelStyle.Format = "HH:00"
            barSeries.Points.DataBindXY(xData, jobData );
            //Set the chart type, Bar; horizontal bars
            barSeries.ChartType = SeriesChartType.Bar;
            //Assign it to the required area
            barSeries.ChartArea = "First";
            //Add the series to the chart
            chart1.Series.Add(barSeries);
Hello,
Since this issue is mainly related to Chart control, I have helped you move this thread to
Chart Controls for .NET Framework forum to get help.
Regards,
Carl
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Set Default Color For BarChart YAxis.

I am new to MS Chart. I am drawing a simple bar chart with following code. My chart draws red lines, for my datapoints    (Y Axis), I want to draw, I want to set the color of remaining data points for example for 1st record (i.e. dt1) my jobData
have value 10, my graph shows red line for 10 points, for remaining 20 points I need to show the Green Line and also for the remaining data points. Thanks in advance.
         double[] jobData = new double[] { 10, 3, 4, 5, 2, 0, 2, 3, 0, 1 };
            DateTime dt1 = new DateTime(2015, 3, 17, 8, 30, 0);
            DateTime dt2 = new DateTime(2015, 3, 17, 8, 35, 0);
            DateTime dt3 = new DateTime(2015, 3, 17, 8, 40, 0);
            DateTime dt4 = new DateTime(2015, 3, 17, 8, 45, 0);
            DateTime dt5 = new DateTime(2015, 3, 17, 8, 50, 0);
            DateTime dt6 = new DateTime(2015, 3, 17, 8, 55, 0);
            DateTime dt7 = new DateTime(2015, 3, 17, 9, 00, 0);
            DateTime dt8 = new DateTime(2015, 3, 17, 9, 05, 0);
            DateTime dt9 = new DateTime(2015, 3, 17, 9, 10, 0);
            DateTime dt10 = new DateTime(2015, 3, 17, 9, 15, 0);
            DateTime[] xData = new DateTime[] { dt1, dt2, dt3, dt4, dt5,dt6,dt7,dt8,dt9,dt10 };
            InitializeComponent();
            //Horizontal bar chart
            //Create a chart area and add it to the chart
            ChartArea area = new ChartArea("First");
            chart1.ChartAreas.Add(area);
           // chart1.x = Color.Green;
          chart1.Size = new Size(1000, 700);
            //Create a series using the data
            Series barSeries = new Series();
            barSeries.XValueType = ChartValueType.DateTime;
            barSeries.BorderColor = Color.Green;
            barSeries.ChartType = SeriesChartType.Column;
            barSeries.Color = Color.Red;
            area.AxisX.LabelStyle.Format = "HH:mm";
            area.AxisY.Maximum = 30;
            area.AxisY.InterlacedColor = Color.Green;
            area.AxisY.Interval = 1;
          // chart1.ChartAreas(0).AxisX.LabelStyle.Format = "HH:00"
            barSeries.Points.DataBindXY(xData, jobData );
            //Set the chart type, Bar; horizontal bars
            barSeries.ChartType = SeriesChartType.Bar;
            //Assign it to the required area
            barSeries.ChartArea = "First";
            //Add the series to the chart
            chart1.Series.Add(barSeries);

I am not sure this is exactly what you mean, but, I think the only way to change the data color is to use a different series.
Imports System.Windows.Forms.DataVisualization.Charting
Public Class Form6
Private Sub Form6_Load(sender As Object, e As EventArgs) Handles MyBase.Load
'setup the chart
With Chart1.ChartAreas(0)
.AxisX.Title = "X"
.AxisX.MajorGrid.LineColor = Color.LightBlue
.AxisX.Minimum = 0
.AxisX.Maximum = 24
.AxisX.Interval = 6
.AxisY.Title = "Y"
.AxisY.MajorGrid.LineColor = Color.LightGray
.AxisY.Minimum = 0
.AxisY.Maximum = 24
.AxisY.Interval = 6
.BackColor = Color.FloralWhite 'AntiqueWhite 'LightSkyBlue
.BackSecondaryColor = Color.White
.BackGradientStyle = GradientStyle.HorizontalCenter
.BorderColor = Color.Blue
.BorderDashStyle = ChartDashStyle.Solid
.BorderWidth = 1
.ShadowOffset = 2
End With
Dim heading1 As String = " 1 - 12"
Dim heading2 As String = "13 - 24"
'draw the chart
Chart1.Series.Clear()
Chart1.Series.Add(heading1)
Chart1.Series.Add(heading2)
Chart1.Series(0).ChartType = DataVisualization.Charting.SeriesChartType.Line
Chart1.Series(0).BorderWidth = 1
Chart1.Series(0).Color = Color.Red
Chart1.Series(0).BorderDashStyle = ChartDashStyle.Dash
Chart1.Series(0).MarkerStyle = DataVisualization.Charting.MarkerStyle.Square
Chart1.Series(0).MarkerSize = 4
Chart1.Series(1).ChartType = DataVisualization.Charting.SeriesChartType.Line
Chart1.Series(1).Color = Color.ForestGreen
Chart1.Series(1).BorderWidth = 2
For x = 1 To 24
If x > 12 Then
Chart1.Series(1).Points.AddXY(x, x)
Else
Chart1.Series(0).Points.AddXY(x, x)
End If
Next
End Sub
End Class

[SOLVED]Can't set background color for Knotes

Today I'm testing KDE 4.9.5 and the app Knotes start well, can add new notes, save them, etc, but it is not changing the background color of the notes...
Here's the app log:
╒══[ /home/jairo ]══════╕
└> knotes
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
Fontconfig warning: "/etc/fonts/conf.d/50-user.conf", line 9: reading configurations from ~/.fonts.conf is deprecated.
knotes(5896) ResourceLocal::ResourceLocal: ResourceLocal::ResourceLocal()
knotes(5896) KNotesResourceManager::load: "Opening resource Notes"
knotes(5896) KNotesLegacy::convertKNotes1Config: The file " "/home/jairo/.kde4/share/apps/knotes/notes/libkcal-122400669.545" " lacks version information but is not a valid KNotes 1 config file either!
╒══[ /home/jairo ]══════╕
└> knotes(5896)/kdecore (KLibrary) kde4Factory: The library "/usr/lib/kde4/kcm_knote.so" does not offer a qt_plugin_instance function.
knotes(5896)/kdecore (KLibrary) kde3Factory: The library "/usr/lib/kde4/kcm_knote.so" does not offer an "init_kcm_knote" function.
knotes(5896)/kdecore (KLibrary) kde4Factory: The library "/usr/lib/kde4/kcm_knote.so" does not offer a qt_plugin_instance function.
knotes(5896)/kdecore (KLibrary) kde3Factory: The library "/usr/lib/kde4/kcm_knote.so" does not offer an "init_kcm_knote" function.
knotes(5896)/kdecore (KLibrary) kde4Factory: The library "/usr/lib/kde4/kcm_knote.so" does not offer a qt_plugin_instance function.
knotes(5896)/kdecore (KLibrary) kde3Factory: The library "/usr/lib/kde4/kcm_knote.so" does not offer an "init_kcm_knote" function.
knotes(5896)/kdecore (KLibrary) kde4Factory: The library "/usr/lib/kde4/kcm_knote.so" does not offer a qt_plugin_instance function.
knotes(5896)/kdecore (KLibrary) kde3Factory: The library "/usr/lib/kde4/kcm_knote.so" does not offer an "init_kcm_knote" function.
knotes(5896)/kdecore (KLibrary) kde4Factory: The library "/usr/lib/kde4/kcm_knote.so" does not offer a qt_plugin_instance function.
knotes(5896)/kdecore (KLibrary) kde3Factory: The library "/usr/lib/kde4/kcm_knote.so" does not offer an "init_kcm_knote" function.
knotes(5896)/kdecore (KLibrary) kde4Factory: The library "/usr/lib/kde4/kcm_knote.so" does not offer a qt_plugin_instance function.
knotes(5896)/kdecore (KLibrary) kde3Factory: The library "/usr/lib/kde4/kcm_knote.so" does not offer an "init_kcm_knote" function.
knotes(5896)/kdecore (KLibrary) kde4Factory: The library "/usr/lib/kde4/kcm_knote.so" does not offer a qt_plugin_instance function.
knotes(5896)/kdecore (KLibrary) kde3Factory: The library "/usr/lib/kde4/kcm_knote.so" does not offer an "init_kcm_knote" function.
knotes(5896)/kdecore (KLibrary) kde4Factory: The library "/usr/lib/kde4/kcm_knote.so" does not offer a qt_plugin_instance function.
knotes(5896)/kdecore (KLibrary) kde3Factory: The library "/usr/lib/kde4/kcm_knote.so" does not offer an "init_kcm_knote" function.
knotes(5896)/kdecore (KLibrary) kde4Factory: The library "/usr/lib/kde4/kcm_knote.so" does not offer a qt_plugin_instance function.
knotes(5896)/kdecore (KLibrary) kde3Factory: The library "/usr/lib/kde4/kcm_knote.so" does not offer an "init_kcm_knote" function.
knotes(5896)/kdecore (KLibrary) kde4Factory: The library "/usr/lib/kde4/kcm_knote.so" does not offer a qt_plugin_instance function.
knotes(5896)/kdecore (KLibrary) kde3Factory: The library "/usr/lib/kde4/kcm_knote.so" does not offer an "init_kcm_knote" function.
I'm googling but can not find anything concrete
Any help?
Thank in advance
EDIT:
It was my mistake, the truth is that this application can change the background color, but does so in a cumbersome way.
Each note can change the background color (individually) and to make it globally, you must remove all existing notes and the new notes then take the chosen color :S ...anyway.... issue solved
Last edited by JohnnyDeacon (2013-02-01 16:02:47)

bmishoe wrote:But all to no avail...I can click on the control and it changes from red to green, like I originally defined in the control. Why can't I programatically change the color?
It is probably more likely that your imported pictures are just covering the background of the button.
A picture ring is the better way to go anyways.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

How can I set default copies for specific report?

I'm trying to set a default of one copy on a specific concurrent request. In this particular case, the NACHA request that produces the NACHA magnetic file. I have a dummy custom printer driver, style, etc. setup and attached to the NACHA concurrent program so that when it executes (as long as the user remembers to put 1 in the Copies field on the concurrent request screen) it will execute the Unix shell script (it grabs the file and FTP's it somewhere).
The problem is, if the user forgets to put 1 in Copies, the Unix shell script won't execute. I'd like to make it so this one request comes up with a default of 1 in Copies. The only way I know of to set copies is in the site profile, application profile (like HR, AP, etc.) or user profile. I really don't want any of these because then the default will be set for all reports within those respective profiles. I was hoping there was a way to set the number of copies in the printer control file, but thus far I can't find any current documentation that shows the syntax of the available commands for the printer control file. Found something on the Internet, but it looked like it was for Oracle 7, perhaps. We're on 11i. On that page, I saw nothing about setting copies, so I don't know if it was just missed, isn't possible or is possible in the new version.

Looks like I may have found my answer.
Create a report set
Add the concurrent program to the report set
set copies in the options zone of the report set to 1
Run the report set instead of the concurrent program itself and the copies will always be defaulted to 1.

Can't Set Default Value for LOV Presentation DB Column

I have a simple form. One of the fields is populated using a named, dynamic LOV with the following source query:
SELECT USER_NAME DISPLAY_VALUE, USER_ID RETURN_VALUE
FROM USER_ACCT
ORDER BY 1
I want the default user to be public, which is one of the possible values returned by the above query. However, I just can't find a good way to do this.
If I put the following query in the Default section, nothing happens.
SELECT USER_ID
FROM USER_ACCT
WHERE USER_NAME = 'PUBLIC'
If I look up the ID and statically put the value in the Default, it works (This isn't acceptable . From environment to environment the value will differ)
If I put the SQL in an after footer page process, it sets the value correctly in the session but, does not update the display.
If I try to put it in the Post Calculation Computation section, it merely produces an error.
I'm sure that I am missing something simple but, I have not spent an hour and half on this.
Someone please help!
-Joe

A function I'd like to see is the ability to not only create a select list dynamically, but also set the default value of that select list's item to the first (or Nth?) value on that list. This could be specified in the builder by an item option.
E.G., if a select list LOV returns three values: "foo", "bar", "baz", go ahead and set the value of the select list item to "foo".
As far as I've been able to discover, there's no built-in way to do this in Application Express. I've looked through the app, the docs, and the forum. If such a method does exist, please let me know.
Otherwise, we end up running additional processes that reissue the query so we can grab the first item as the default value. This seems inefficient to me.
Keeping the LOV query and the "first item" query consistent can present problems as well. We usually end up pushing the LOV query into a function so it can be maintained in a single location, but this seems more like a workaround than anything else.
While the query is probably cached, Application Express has that return value already, right? Why calculate/choose it again?

Link Colors: Here you can change the default colors for Web links. Click on the color samples to select colors.

This worked before, but, since I reinstalled my pc, it doesn't.
Why is this & what must I do for it to work. ?

Try using this add-on: https://addons.mozilla.org/en-US/firefox/addon/color-toggle/

FF31: How can I set a color for the empty page opened by new tab ?

Currently my new tabs open an empty, white colored page.
Is it possible to give this page a color of my choosing, say sky blue ?
If so, how ?

Try:
*Customize about:newtab: https://addons.mozilla.org/firefox/addon/customize-aboutnewtab/

Extending flash: how do I set default values for filenames

Hi,
I am trying to set default values for filenames
<choosefile> and <popupslider>s that will show up when
my XMLpanel first loads in my jsfl extension file. It seems that I
can only set default values for textbox items.
How do I do this for filenames and popups?
As a workaround, I also tried using a flash object dialog box
to look like a <choosefile>, or any jsfl command, but then
how do I return those values back to the XMLpanel that calls them.
and pass the data back to my jsfl script.
lemme know if you know a way,

Create two constants for the Allocate Mode input (right click > create > constant). Place one in the true case of the case structure, and place the other one in the false case. Wire them to the same tunnel (border of the case structure), then wire the tunnel to the Allocate Mode terminal of the AO Config. I don't have Traditional DAQ installed, but that should do it.
Misha

Can I set a "default color" for new layers?

I find myself constantly changing the color of new layers back to my favorite: Magenta. Is there a way to just make this the default new layer color?
I understand the reasoning of using different colors for each layer, but so many standard colors do not preview well, with the artwork, I find them useless. I'd just as soon use one color.

I have a hotkey for an action creating a new layer but unfortunately the layer color option cannot be recorded in the action. What I do is create a bunch of layers I would eventually need, select all of them in the Layers panel and double click on the selection to open the options dialog where I can change the layer color for all at once.

Can I set default colors for generated shapes in Premiere Pro CC?

Similar Messages

Maybe you are looking for