Can I set the normalization level in the Bounce dialog?

I want to normalize my tracks to, say, -1db instead of 0db. Is there any way to set the normalize feature in the bounce dialog to do this?

Hi
The Art Of Sound wrote:
Which in turn reduces the dynamic range......
Louder parts get quieter... and quieter parts get louder....
No
Turning the gain up or down to ensure that the peak levels ( or RMS levels) merely turns the whole signal level up or down: no compression or expansion
http://en.wikipedia.org/wiki/Audio_normalization
CCT

Similar Messages

Where can I set the log level for the "Inbox log file" ?

From the Siebel 8 Bookshelf, it says :
"To set the level of the Inbox log file for troubleshooting
*In Siebel Tools, set the Log Level for the Inbox log file (Alias = InboxLog) to 5*."
But where exactly in Siebel Tools can I find that Log Level ? Which object does the Siebel bookshelf talk about ?

Hi,
Loglevels are not configured in Siebel Tools. You have to configure them with the siebel client. You can find a parameter at "Administration - Server Configuration / Server / Events"
Search for "Inbox General Log Events". Set this parameter to 5. It think this should help you.
Cheers Andreas

Unable to get the composite instance for the invocation. This could be because instance has not yet been created or because the audit level for the SOA infra has been set to Off

I am on Oracle 11.1.1.7 BPM suite on W8 64 bit. I can't launch the flow trace and get the error "Unable to get the composite instance for the invocation. This could be because instance has not yet been created or because the audit level for the SOA infra has been set to Off". I have set the audit level to development at the soa-infra>SOA Administration> Common Properties > Audit level set to development and Capture Composite Instance State is Checked.
Can somebody advice.
Thanks

Can you please confirm me the following steps...
Log in to the EM console, Expand soa-infra (soa_server1) , go to the partition where your composite is been deployed, Click on your composite, On the right, click on the dropdown Settings and choose Composite Audit Level. you can choose to set the Audit Level for this composite. If you choose Inherit, it will take the settings to what the server is being set to. Otherwise, we can override it by choosing Off, Production, or Development.
Make sure your setting for that composite is not Off, keep inherit or production or development.
Thanks,
N

How can I set up two iPhones with the same contact, photos, music etc... but a different sim card and phone number. They will both be my phones, but one will be for use in other countries.

How can I set up two iPhones with the same contact, photos, music etc... but a different sim card and phone number. They will both be my phones, but one will be for use in other countries.

Phone A = phone with information you want duplicated
Phone B = phone that you want to copy from A
Backup Phone A.
Wipe Phone B using these instructions. What to do before selling or giving away your iPhone, iPad, or iPod touch - Apple Support
Phone B should be on the 'Hello' screen. Do not swipe it. Launch iTunes. Plug in Phone B.
When iTunes asks if you want to set up as new phone or restore from backup, choose restore from backup of Phone A.
After this setup, any changes to one phone (i.e. adding a contact, downloading an app) will have to be manually duplicated on the second phone, if that is your desire). Making changes to one phone will not affect the other after setup.

HT4759 I now have my daughters iPad can you please tell me why I can't set up iCloud.in settings the iCloud is greyed out also how do I change her mail account to mine?

I now have my daughters iPad can you please tell me why I can't set up iCloud.in settings the iCloud is greyed out also how do I change her mail account to mine?

To change your iCloud ID or password you have to go to Settings>iCloud, tap Delete Account, then sign back in with your other ID. If you need to migrate any of your daughter's iCloud data to your account, choose Keep on My iPad when prompted, then choose Merge to upload it to the new account. If not, choose Delete from My iPad.

Can i set up my ipad in the same itouch account?

can i set my new ipad in the same account/place where i currently have my itouch set up? will this affect what i currently have in my itouch or will it see the difference when i connect my ipad and itouch? thank you

You can use the same account and iTunes library with both - iTunes will recognise that it's a different device and you can then chose what to sync or not to sync. I use my iPad, iPhone, and iPod Touch on the same computer without any problem.

Can we set a default value for the container variable in BPM?

Can we set a default value for the container variable.?
Suppose if i have a loop step and i have given a container variable i=5 as end condition.What value will it take during its first execution?Can we set the value for container before a recieve step?

Hi
Define Container Variable of Type integer and Category Simple Type .Use Condtion in Loop.
In Container Operation Step Assign value and Use Expression to
Increase or Decrease Valus according to your operation.
look Pattern 4 in this blog to understand Container Operation
/people/sharathchandra.girmaji/blog/2008/09/11/bpm-with-patterns-explained-part-1

How can I set up iMessage to ensure the text messages people are sending me arrive both on my computer AND on my iPhone as well?

How can I set up iMessage to ensure the text messages people are sending me arrive both on my computer AND on my iPhone as well?

Use the same ID in Settings > Messages > Send & Receive on both devices and have people use that ID. Your iPhone number would be a good choice.

Can I set Acrobat X to increase the proportion of my PC's RAM it uses?

Can I set Acrobat X to increase the proportion of my PC's RAM it uses, in order to speed up OCR processing? Currently, it uses up to 25% of my PC's RAM when OCR processing but I would like to increase this in order to complete OCR jobs more quickly.

Short answer: no.
Long answer: a very few programs can use multiple cores. To do this, they have to split up and run themselves as multiple separate programs (in effect). This is only really suitable when either
(a) two entirely different things need to be done or
(b) a job can be split up into a lot of identical jobs, and all done at the same time.
Photo editing and video editing are the obvious cases of (b), since they have to repeat the same stuff over each bit of a picture, and a picture could be done in slices. Making programs run on multiple cores is awesomely complicated (especially if they previously didn't) but it's no coincidence that Adobe Photoshop and (I think) Adobe Premiere Pro - being image and video editors - are out there using multiple cores.
OCR doesn't lend itself to this terribly well (since the entire page is context), but what could work well is a program which is designed to do OCR on multiple files; it could split up and do them at the same time. Acrobat isn't that kind of high end program, however, it's meant for desktop users doing one thing at a time.

HT1689 Can i combine my husbands contacts and mine if we have two different itune accounts and emails and passwords? Can both sets of contacts live on the cloud and be donwloaded to both our phones?

Can i combine my husbands contacts and mine if we have two different itune accounts and emails and passwords? Can both sets of contacts live on the cloud and be donwloaded to both our phones?

Hey NON-TECHNO-WIZARD
You can do one of two things. The first is to just export out the contacts and import them into each other’s account. If something is updated the other person will not be updated with the information. Now another options is using one Apple ID for iCloud Syncing and then you can still use individual Apple ID’s for store purchases. The article below will shed some light on how you can use the Apple ID.
Using your Apple ID for Apple services
http://support.apple.com/kb/ht4895
Thanks for using Apple Support Communities.
Regards,
-Norm G.

Item - Can't set value on item because the item can't get focus. [66000-15

hi i created one text box in purchase order form and asign the choose from list.l when i choose in edit box its show the following error-- Item - Can't set value on item because the item can't get focus
Dim lonHeadDatasource As SAPbouiCOM.DBDataSource
lonHeadDatasource = oOrderForm.DataSources.DBDataSources.Item("OPOR")
oNewItem1 = oOrderForm.Items.Add("EditDS", SAPbouiCOM.BoFormItemTypes.it_EDIT)
                    Dim oCFLs As SAPbouiCOM.ChooseFromListCollection
                    Dim oCFLCreationParams As SAPbouiCOM.ChooseFromListCreationParams
                    Dim oCFL As SAPbouiCOM.ChooseFromList
                    oCFLs = oOrderForm.ChooseFromLists
                    oCFLCreationParams = SBO_Application.CreateObject(SAPbouiCOM.BoCreatableObjectType.cot_ChooseFromListCreationParams)
                    oCFLCreationParams.MultiSelection = False
                    oCFLCreationParams.ObjectType = "INTORDER"
                    oCFLCreationParams.UniqueID = "CFL1"
                    oCFL = oCFLs.Add(oCFLCreationParams)
                    oItem = oOrderForm.Items.Item("4")
                    oNewItem1.Top = 95
                    oNewItem1.Height = oItem.Height
                    oNewItem1.Width = 140
                    oNewItem1.Left = 125
                    oEdit = oNewItem1.Specific
                    oEdit.DataBind.SetBound(True, "OPOR", "U_EditDS")
                    oOrderForm.Items.Item("EditDS").Specific.ChooseFromListUID = "CFL1"
                    oEdit.ChooseFromListAlias = "U_ID"
Item events
Try
            If pVal.BeforeAction = False Then
                If (pVal.FormType = 142) Then
                    Select Case (pVal.ItemUID)
                        Case "EditDS"
                            Select Case (pVal.EventType)
                                Case SAPbouiCOM.BoEventTypes.et_GOT_FOCUS
                                Case SAPbouiCOM.BoEventTypes.et_CHOOSE_FROM_LIST
                                    Dim bonCflEvents As SAPbouiCOM.ChooseFromListEvent
                                    Dim bonCflList As SAPbouiCOM.ChooseFromList
                                    Dim bnnstrUID As String
                                    Dim bonDTTable As SAPbouiCOM.DataTable = Nothing
                                    bonCflEvents = pVal
                                    bnnstrUID = bonCflEvents.ChooseFromListUID
                                    bonDTTable = bonCflEvents.SelectedObjects
                                    bonCflList = oOrderForm.ChooseFromLists.Item(bnnstrUID)
                                    If pVal.BeforeAction = False Then
                                        If oOrderForm.Mode <> SAPbouiCOM.BoFormMode.fm_FIND_MODE Then
                                            If Not (bonDTTable Is Nothing) Then
                                                If bonCflList.UniqueID = "CFL1" Then
                                                    If pVal.ItemUID = "EditDS" Then
                                                        Dim value As String = Nothing
                                                        oOrderForm.Items.Item("EditDS").Specific.value = bonDTTable.GetValue(0, 0)
                                                    End If
                                                End If
                                            Else
                                                lonHeadDatasource.SetValue("EditDS", lonHeadDatasource.Offset, "")
                                            End If
                                        End If
                                    End If
                            End Select
                    End Select
                End If
            End If
        Catch ex As Exception
            SBO_Application.SetStatusBarMessage(ex.Message)
        End Try
Thanks & Regards
B.Narain

Hi
Instead of   oOrderForm.Items.Item("EditDS").Specific.value = bonDTTable.GetValue(0, 0) the following
lonHeadDatasource.SetValue("U_EditDS", 0, bonDTTable.GetValue(0, 0))
Regards
Arun

FaceTime limits the input level of the internal mic, FaceTime limits the input level of the internal mic

I can use Skype without any issue with my MBAir, but as soon as connect using facetime, my internal mic loses it sensibility (I've tracked it under the Preferences/Sound/Input). After disconecting, I can see that the mic starts functioning normally again.

DougLegacy wrote:
I can't find a way to lower the input level of the internal mic.
you should be able to set it with the input slider in the Track "i"nfo pane

I have request in the report level but the same is missing in the infocube

Dear Experts,
I have request in the report level but the same is missing in the compressed infocube level. What could be the cause? does the compressed infocube deletes the request ? if so, I could able to view other requests under infocube manage level.
Kindly provide with enough information.
Thanks.............

Hi
Compressing InfoCubes
Use
When you load data into the InfoCube, entire requests can be inserted at the same time. Each of these requests has its own request ID, which is included in the fact table in the packet dimension. This makes it possible to pay particular attention to individual requests. One advantage of the request ID concept is that you can subsequently delete complete requests from the InfoCube.
However, the request ID concept can also cause the same data record (all characteristics agree, with the exception of the request ID) to appear more than once in the fact table. This unnecessarily increases the volume of data, and reduces performance in reporting, as the system has to perform aggregation using the request ID every time you execute a query.
Using compressing, you can eliminate these disadvantages, and bring data from different requests together into one single request (request ID 0).
This function is critical, as the compressed data can no longer be deleted from the InfoCube using its request ID. You must be absolutely certain that the data loaded into the InfoCube is correct.
Features
You can choose request IDs and release them to be compressed. You can schedule the function immediately or in the background, and can schedule it with a process chain.
Compressing one request takes approx. 2.5 ms per data record.
With non-cumulative InfoCubes, compression has an additional effect on query performance. Also, the marker for non-cumulatives in non-cumulative InfoCubes is updated. This means that, on the whole, less data is read for a non-cumulative query, and the reply time is therefore reduced. See also Modeling of Non-Cumulatives with Non-Cumulative Key Figures.
If you run the compression for a non-cumulative InfoCube, the summarization time (including the time to update the markers) will be about 5 ms per data record.
If you are using an Oracle database as your BW database, you can also carry out a report using the relevant InfoCube in reporting while the compression is running. With other manufacturers databases, you will see a warning if you try to execute a query on an InfoCube while the compression is running. In this case you can execute the query once the compression has finished executing.
If you want to avoid the InfoCube containing entries whose key figures are zero values (in reverse posting for example) you can run a zero-elimination at the same time as the compression. In this case, the entries where all key figures are equal to 0 are deleted from the fact table.
Zero-elimination is permitted only for InfoCubes, where key figures with the aggregation behavior SUM appear exclusively. In particular, you are not permitted to run zero-elimination with non-cumulative values.
For non-cumulative InfoCubes, you can ensure that the non-cumulative marker is not updated by setting the indicator No Marker Updating. You have to use this option if you are loading historic non-cumulative value changes into an InfoCube after an initialization has already taken place with the current non-cumulative. Otherwise the results produced in the query will not be correct. For performance reasons, you should compress subsequent delta requests.
Edited by: Allu on Dec 20, 2007 3:26 PM

Portal Invalid at the top level of the document. Error processing resource...

We installed WebLogic Portal. We were able to bring up the webpage while we were configured on port 80. As soon as we wired the portal for port 443, it would not display page. Error: Invalid at the top level of the document. Error processing resource...
We are on a VM with Redhat Linux 5. Oracle Weblogic portal 10.3.5
Has anyone had this issue in the past and was able to resolve it?

Did you upgrade your Portal to 10.1.4? Are you using the Web Cache port # or the HTTP Server port #? You can get this error message if you use the HTTP Server port # on Portal 10.1.4.

The toolbar in the adobe app that allows you to choose the brightness level and the page layout doesn't hide. Because of that, i of course am unable to read the top part of the page...[Android]

The toolbar in the adobe app that allows you to choose the brightness level and the page layout doesn't hide. Because of that, i of course am unable to read the top part of the page. I cannot find anything in the settings that will make it go away. What do i do? I use Samsung Ace.

What is the Acrobat DC version and the android version that you are running? You can find the Acrobat version here: How to find the Acrobat DC version installed on your Android device

Can I set the normalization level in the Bounce dialog?

Similar Messages

Maybe you are looking for