Can I set up a new Mac Pro late 2013 using a Wacom Cintique 13HD tablet as the default monitor? How would I install the driver software for the tablet?

Can I set up a new Mac Pro late 2013 using a Wacom Cintique 13HD tablet as the default monitor? How would I install the driver software for the tablet?

The wacom site will have the drivers for you.
http://us.wacom.com/en/support/drivers

Similar Messages

  • New Mac Pro (late 2013) disk permissions

    I am getting a substantial number of permission repairs - like hundreds - when I run Repair Disk Permissions from Disk Utility on my new Mac Pro (late 2013).
    Any thoughts on what might be wrong?
    New Mac Pro (late 2013)
    3.5GHz 6-Core Intel Xeon E5
    32GB 1866MHz DDR3 ECC - 4X8GB
    1TB PCIe-based Flash Storage
    Dual AMD FirePro D500-3GB VRAM
    Running OS X 10.9.2
    Thanks

    Although it’s immensely popular, repairing permissions is a waste of time unless you have a specific indication of a permission error involving system files, which is rare, or a boot failure. It is not a universal rite of healing for computers. It has traditionally spewed bogus warning messages that mean absolutely nothing.
    The built-in help for Disk Utility reads in part:
    If you see an alert or a message that says your permissions are set incorrectly, you can correct the disk’s permissions by clicking Repair Disk Permissions.
    It’s justifiable, though rarely necessary, to repair permissions after running a third-party software installer, as defective installers have been known to damage the permissions of system files.

  • Premiere Pro CC crashing on brand new Mac Pro (late 2013)

    Such a big disappointment, yesterday our brand new Mac Pro (Late 2013) with OS X version 10.10.2 was installed and Premiere Pro CC is constantly crashing. One of the problems is that when I open a brand new project and before I add any content to a new sequence I just want to position the video track higher so I can see more audio tracks, the program crashed. I did it several times (new projects, new sequences) every time the same crashing program.
    Deinstalled Premiere Pro and reinstalled it again, but no luck.
    Tomorrow I created a whole new account with administrator rights on the Mac, the issue as described above was gone but at some point in time the program crashed again, and when I reopen the project, with two sequences open (one with footage and one empty) and I want to close the empty one, Premiere is crashing again. So I can't continue my work on this project and need to start over again....
    This is the error report that I'm getting....
    I hope somebody can help me on this because it's very frustrating...
    Thanks in advance

    Hi tschreiber10,
    Thanks for posting on Adobe forums,
    Please follow this document http://helpx.adobe.com/creative-cloud/kb/ame-premiere-crash-launch-export.html
    Regards,
    Sandeep

  • USB Card Reader not recognized on new Mac Pro (late 2013)

    My Sony USB multi-card reader (model: MRW62E), which I use for SD cards mostly, works on my MacBook Pro (Retina, Mid 2012), my new iMac, and my old Mac Pro (2009), via the USB ports, but is unrecognized entirely on my new Mac Pro (late 2013). All machines are running OS X Yosemite 10.10.2. Neither the card reader, nor the cards appear at all in FCP, image capture, apple system profiler, the desktop, or disk utility. I cannot find any drivers online addressing the issue, including Sony's website.
    Perhaps an additional update for increased compatibility vis-a-vis the new Mac Pro would do the trick...

    Does the reader show up under USB in System Report?
    If the reader is working properly both the reader and an inserted card will show up.

  • New Mac Pro (Late 2013) and Motion

    Although Final Cut Pro is optimized for the new Mac Pro (Late 2013), the current Motion 5.1 apparently is not.  Even when turning the render settings down, the playback of a complex motion sequence within Motion was extremely choppy.  When exporting to a ProRes file, only four to six of the available 12 threads ony my 6-core system were being only partially utilized.   I have 64 GB RAM and dual D700s with nothing else running, so system resources are plentiful.  Any suggestions out there?  Hopefully there will be an update to bring it up to speed.

    The sequence I am rendering in Motion is definately complicated, with about 100 differencet images on a moving wall with reflections and multiple other effects.  This definitely pushes the system alot but I was able to use the same sequence on a very old Mac Pro (2006) and a i7 Hackintosh with an Apple 5870 card overclocked to 4 GHz without this severe stuttering on playback within Motion.  There is no shortage of memory on the new Mac Pro with 64 GB RAM and D700s with 6 GB VRAM, running all files on the main internal SSD.  Very strange.

  • How Will iMovie Run on New Mac Pro (late 2013)?

    Is iMovie v10 ever likely to be upgraded to support the multiple-cores in the new Mac Pro (late 2013) the way Final Cut Pro X does? If not, will a fast iMac run iMovie about as well as the new Mac Pro (late 2013)?

    No one here knows what Apples plans are for iMovie?
    I think it's fair to say everything will run faster on the new MacPro but I don't think it's a reason by itself to upgrade hardware.
    iMovie 10.0.9 runs just fine on my 2010 iMac.
    Matt

  • New Mac Pro (late 2013), Boot Camp, Windows Server 2012

    Does new Mac Pro (late 2013) support Windows Server 2012 install by Boot Camp?

    No.
    Boot Camp: System requirements for Microsoft Windows operating systems - Apple Support
    Apologies, Templeton Peck, did not see your post.

  • Premeire CC 2014 not playing clips or timeline with New Mac Pro Late 2013 D700

    I have used premeire cs5 and cs6 and never had this issue
    I just bought a new mac pro and installed the trial of Premeire cc 2014
    I import clips like normal, set my sequence and the play button does not work
    in the viewer or in the timeline.  Can seem to make anything work
    also I am on 10.9.5 which from what I can see should be fine.

    Hi Ernie,
    Try this: create a new user with Admin privileges and see if you can get Premiere Pro to playback video once more.
    Thanks,
    Kevin

  • Wireless apple keyboard does not connect to new Mac Pro Late 2013

    I just got my new Mac Pro 2013 and I can not connect it to my wireless apple keyboard. I am not able to set up and run the system. Any thoughts? Thanks in advance!

    How to reset as Apple wireless keyboard, mouse or trackpad(troubleshooting pairing and other common problems):
    http://davemeehan.com/technology/how-to-reset-an-apple-wireless-bluetooth-keyboa rd-mouse-or-trackpad

  • Boot Camp on new Mac Pro (Late 2013)

    I am stuck with a Boot Camp installation on a new Mac Pro.
    I have tried Windows 8.1 Pro, Windows 8.1 Enterprise, and Windows Server 2012 R2. (Can't try Windows 7, obviously.)
    All three give me this at the end of setup:
    Windows could not update the computer's boot configuration. Installation cannot proceed.
    I've tried letting the Boot Camp Assistant do everything, I've also followed the advice in several posts that suggest interrupting the process by booting back into Mac and using Disk Utility to format the Boot Camp partition as FAT, ExFAT, etc. All lead to the same error after rebooting to the USB drive and commencing with Windows setup.
    Windows finishes the installation, seemingly, but it just doesn't seem to be able to update the boot data.
    So, what's the trick? How did other MacPro6,1 users get Boot Camp paved? Is this a firmware update I'm going to need to wait for?
    I tried support, it was a joke. Apple couldn't pass me off to Microsoft quick enough; and Microsoft couldn't pass me back to Apple quick enough. I think that's the most I've ever identified with a tennis ball.

    What happened to the body of my question? Can everyone else see it, just not me?
    Oh wait, I see. This entire site is completely broken in Chrome:

  • New Mac Pro (late 2013) crashes / freezes while rendering or editing in Premiere Pro CC

    We recently purchased a new Mac Pro desktop (Late 2013, 16GB memory, D700 Graphic Card, 2.7 GHz -12 Core, OSX 10.9.3) and we are running Adobe CC on it. When using Premiere Pro CC (7.2.2) I am having major issues while rendering and editing. About 50% of the time when I try to render it starts off real fast then just freezes. This happens in Premiere and Media Encoder. Sometimes I can just Force Quit Premiere or Media Encoder and other times I have to do a hard restart on the entire computer because the entire computer freezes. The computer will also occasionally freeze whenever doing simple editing or stacking layers. The  computer will also just decide to suddenly stop and restart when editing or doing simple tasks like browsing the web. Additionally there has been several times if the render does finish, the final video will have digital glitches throughout the video. I have to redo the render once or twice and it will finally be fine. This all is happening several times a day. This never happened on our previous Mac Pro, but we were not running Mavericks. I used Migration Assistant to transfer from old computer to new computer. So I don't know if this is an a problem with the actual Mac Pro, Mavericks, graphic card or Adobe? But right now I am very frustrated as you can imaging spending all this money for a computer that has been giving us more issues than our previous computer. Any help would be greatly appreciated!

    1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
    2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
    There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the behest of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
    Here's a summary of what you need to do, if you choose to proceed:
    ☞ Copy a line of text in this window to the Clipboard.
    ☞ Paste into the window of another application.
    ☞ Wait for the test to run. It usually takes a few minutes.
    ☞ Paste the results, which will have been copied automatically, back into a reply on this page.
    The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
    4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
    5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
    6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
    Triple-click anywhere in the line of text below on this page to select it:
    PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts 51 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports 'com.autodesk.AutoCad com.evenflow.dropbox com.google.GoogleDrive' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n\t(%s)\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */   /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/root/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1000) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/d;/(etc|Preferences)\//s/^\.\/[^/]+//p;' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.[bw]/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| ","||kMDItem'${p[35]}'=");sub("^.."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[9]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n   "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n   [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n   ...and %s more line(s)\n",l-L);} ' ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ +B/{ s/.+= |(-[0-9]+)?\.s.+//g;p;} ' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / /{$0="'"${p[28]}"'"};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil PlistBuddy whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '-c Print /L*/P*/loginw*' '-c Print L*/P*/*loginit*' '-c Print L*/Saf*/*/E*.plist' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' '-c Print\ :'${p[35]}' 2>&1' '-c Print\ :Label 2>&1' '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'Beac|caug|dead[^bl]|FAIL|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,[lps]*.conf,pam.d,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}* .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' -i4TCP:0-1023 com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' );N1=${#c2[@]};for j in {0..8};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A1 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D23 14 2 48 43;D13 4 5 32 1;D22 4 4 50 0;D13 14 3 49 5;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-  
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    7. Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
    8. If you see an error message in the Terminal window such as "syntax error," enter
    exec bash
    and press return. Then paste the script again.
    9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
    If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
    10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
    [Process completed]
    to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
    11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
    At the top of the results, there will be a line that begins with "Model Identifier." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
    If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
    12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
    Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
    Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

  • New Mac Pro (Late 2013) and CC 2014

    Ok, I've been working on one of the new Mac Pro's from late 2013 and using CC 2013 with R3D footage quite successfully (though without great debayering performance on the R3D - I know it's supposed to be improved in CC 2014).
    I'm running 10.9.2 Mac OSX.
    When football season here in the states starts in two weeks, I will have a VERY deadline intensive 30 minute television show that I have to turn around from Saturday night at 2am until 8am Sunday morning.
    I have purchased CC 2014, but have read in the past few weeks about the headaches the combination of OS 10.9.3 (and .4) and CC 20014 have caused.
    My question is, where do we stand with those issues, and what would the community / Adobe moderators say about me heading up to the latest OS and CC 2014 under these circumstances? Thanks so much for the insight everyone.
    Banks

    jameskachan wrote:
    …The obvious reason [sic] seems to suggest…
    That's what it suggests to you, in the limited scope of your vision and knowledge, and without your having provided detailed specs about your hardware.
    Due to the current unavailability of clairvoyants and mind-readers in the forum, we respectfully request you supply sensible, complete details.
    We don't even know what your specific issues are, and for all we know you may be running the pathetic, buggy Yosemite OS—which Apple is giving away for free.
    In this case, you have been enormously fortunate in that you received a reply from none other than Gµrµ Chris Cox, a top Adobe engineer who has been writing Photoshop code since the last millennium.
    It's hight time you drop the attitude and avoid further embarrassing yourself in a public forum.  Just my two cents.

  • New Mac Pro (late 2013)

    Having some weird issues with my new Mac Pro which I just received 3 days ago.
    To get setup I took my hard drives out of my old Mac Pro, installed them into a Promise Raid. One of the drives was my old startup drive which I had done a clean system install within the last 3 months.
    I imported apps, files and settings to get my nMP ready to use quickly.
    Using it I have had apps hang at times (Dreamweaver CS6, Transmit 4 to name two) forcing me to restart the computer to get things in order again. Seems to be happening more frequently the longer I use it, had to restart twice today within 8 hours.
    I was going to run a disk repair but I don't have a recovery hd to boot into. If I hold command-r during start up I stay at a blank gray screen the whole time. If I hold down the option key I see a recovery HD option but when I try to startup off of it I get the circle with the line through it icon and have to restart again to do anything.
    I'm really at a loss here, really didn't expect software issues with this new computer.
    Any thoughts on what to look at first?
    System config:
    3.5 6-core
    32gb RAM
    Dual AMD FirePro D300
    10.9.2

    No, it shouldn't. If you are having problems with third-party software, I'd suggest reinstalling them from scratch and original media.
    As for disk repairs you do it this way:
    Repair the Hard Drive and Permissions - Mavericks, Lion/Mountain Lion
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu. Select Restart from the Apple menu.

  • Installing windows 8.1 on new mac pro (late 2013)

    Greetings,
    First time poster so forgive me if I mess up protocol.
    I'm trying to install Window 8.1 on my new late 2013 Mac Pro via bootcamp.
    I have followed all the steps in bootcamp and the installation fails saying "cannot update boot configuration". 
    I tried using a few methods I saw people on here had success with creating their own partitions with disk utility, but I still have not had success. 
    My system is the 6 core version, 16gb RAM, 512gb flash storage, D500 graphics cards
    Any help would be greatly appreciated.

    I have the same problem with my brand new MacPro (6-Core, D700, 1tb SSD)
    I have called Apple support to report this issue, in the mean time I've done the following tests:
    Windows 7/8 tests NO Joy...
    I have also tried tricking the windows 8 installer by doing the following.
    1)Boot of Windows 8 installation (USB)
    2)At the setup screen it will ask you to format your boot camp created drive to NTFS so that windows can be installed.
    After the formatting is done and windows is ready to install i swap the Windows 8 USB stick for a Windows 7 USB stick then I click on next.
    3)Windows starts copying the files just like it did on the Windows 8 installation and I get the same error.
    "Can't update boot configuration"
    I guess it has nothing to do with the Windows USB Stick since I've tried installing Win 7/8 and 8.1 with the exact same error.
    I have not received any news from Apple support on this issue.
    Any other ideas or suggestions ?
    Thanks!

  • New Mac Pro (late 2013) switching off

    Hi, I have the new style mac pro, cylinder late 2013 model 3.5ghz 6 core Intel Xeon E5 on 10.9.4 and have now had a few occasions where I have gone to the machine in the morning only to find it has turned itself off.
    I have also had a few occasions where I have woke it from stand by and the fan has started running a lot faster and noisier than normal running conditions. The last time it happened, I powered off the machine and switched it back on and the fan was running silently as normal. This time I have left to see if the fan slows down but it has been 15 minutes now and it is still sounding a plane is warming its engines up ready for a take off.
    I have to say that I have not been impressed with this machine since I have got it, it hasn't really felt any faster than my old mac pro in my experience. But thats another topic (I wanted to mention it in case I had a Friday job and its just not performing well)
    I will phone Apple as it must still be under warranty but I wanted to ask advice first.
    Regards,
    Jason

    lllaass,
    sounds like there is a background application that runs it hot. Open activity monitor an check what applications are running and how much CPU they use.

Maybe you are looking for

  • Get "no bootable device- insert boot disc and hit any key" error

    Hp G72 Laptop, Windows 7 64 bit, "no bootable device-insert boot disc and hit any key" (I have no boot disc.) I was in the process of replacing the hard drive and the computer was starting the final phase after copying all files. When it restarted th

  • Problem After iTunes Update Installed

    Software Updates did its automatic check and I noticed the window on the desktop that said there was an update.  I looked at the details and I thought it said itunes update 10.6.3.  I read the details and installed it.  After it installed, I restarte

  • RE:When shipping the iPhone in for repair, should I leave the SIM card in i

    In response to this thread that seems to of been archived not to alllow replies. http://discussions.apple.com/thread.jspa?threadID=1295444&tstart=0 If you are shipping back I assume you called Apple and they are sending you a box (as that is what the

  • No access to management interface on WLC4002

    my dilemma is the follwing: I've have a remotly connected WLC4002. The service port is in 10.10.4.0/23 and the management IF in 10.10.1.0/24. Both are connected to a L3 catalyst which is also providing the default gateway for both networks. (i.e. ~.2

  • JavaScript FileUpload Question...

    Hi there! I'm uploading a file using the JavaScript code below. Is it possible to change the default browse button, to for example an image? If not, can the uploading be done using another language? ...<INPUT TYPE="file" NAME="x">.... Best regards Pa