Can i share all documents and files on my mac book pro and mac desk top using word

can i share all documents and files on my mac book pro and mac desk top using word

Hello, you should be able to if they're running the same version of Word.
When you log into the Desktop for File Sharing from the MBP, use the Desktop's Username & Desktop's Password, & vice versa if logging into the MBP from the Desktop.

Similar Messages

My wife and I have 2 new iPhones and also have a mac book pro and an iMac. How can we share apps, music and contacts between all these?

My wife and I have 2 new iPhones and also have a mac book pro and an iMac. How can we share apps, music and contacts between all these?

Use the same Apple ID and password for purchasing in all these devices.

I had a windows laptop, and I save files like photos, documents, videos and other things on an external hard drive, and now I want to move those files to the Mac book Pro, and then move those files again to another external hard drive 1T. My question is:

I had a windows laptop, and I save files like photos,documents, videos and other things on an external hard drive, and now I want tomove those files to the Mac book Pro, and then move those files again toanother external hard drive 1T. My question is: Is it possible? Doing this willnot affect the files that I had in windows? No information is lost? or how cani do it?

Connect the external drive to your Mac and drag the files from it to your Mac's internal drive. Then dismount and disconnect the external drive, connect the 1TB external drive, and drag the files from the internal drive onto the external. Nothing will have been deleted from any of the drives up to this point; the files will only have been copied. Verify that the files are readable. There's no reason they shouldn't be; this is just a precaution.
Now if you wish to delete the files from any of the drives, drag them to the Trash, and Empty the Trash while the drive from which they came is still connected. If you disconnect the drive before emptying the Trash, the files you were trying to remove from it won't be deleted. They'll remain in the Trash and continue to take up space on the drive.
Note that if your external drives are in NTFS format, you won't be able to write anything to them or delete anything from them, though you will be able to read and copy the files they contain. The NTFS disk format is read-only to the Mac OS, unless you have a third-party NTFS driver installed. To make your drives cross-platform readable and writable, you must reformat them in the FAT32 or ExFAT format.

Hi All, I recently bought a Mac Book Pro and transferred all my photos from my hard drive onto the Mac. I realised that there were some folders which didn't have the camera information embedded in the files and these files refuse to open on iPhoto. HELP!!

Hi All, I recently bought a Mac Book Pro and transferred all my photos from my hard drive onto the Mac. I realised that there were some folders which didn't have the camera information embedded in the files and these files refuse to open on iPhoto. I know that the folders that have the problem were not transferred to the hard drive via a photo transfer application (I have a Canon camera) but I simply copied them out of the photo card and onto my old PC.
Is there some way I can open these pictures on my Mac? They work fine on a PC.

Thanks for your reply.
The files don't open in preview either. In preview I get the error message 'The file "xxxx_xxx.jpg" could not be opened. It may be damaged or use a file format that Preview doesn't recognize'. The folders with these un-openable pictures do not even get imported into iPhoto. When I try to import them I get an error message about the files being unreadable.
The color profile information on the un-openable files is not visible but I see that all the other files from my old drive are RGB.

I've tried to set up a new user on a mac book pro and i restarted it to create the new account but now all i can get is a white screen with the apple logo and the loading symbol what can i do ?

i've tried to set up a new user on a mac book pro and i restarted it to create the new account but now all i can get is a white screen with the apple logo and the loading symbol what can i do ?

Look at this support article:
http://support.apple.com/kb/ts2570
Ciao.

Motion 5. I have a Mac Book Pro and am trying to export my project, but cannot as the SHARE options are all faded out.

I have a Mac Book Pro and am trying to export my project, but cannot as the SHARE options are all faded out. All I am doing is adding text to a movie. It plays back fine in motion.

Hey Adam. Try this link and see if any of the suggestions help: https://discussions.apple.com/thread/5216906?tstart=30

I have a mac book pro and have already downloaded adobe flash player. However when i go to watch a video it says "Block Plug In". But my adobe is already up to date. Can someone help me to fix this so i can watch videos?

I have a mac book pro and have already downloaded adobe flash player. However when i go to watch a video it says "Blocked Plug In". But my adobe is already up to date. Can someone help me to fix this so i can watch videos?

If you're sure you've installed the latest version of Flash, take each of the following steps that you haven't already tried. After each step, relaunch Safari and test. For a "missing plug-in" error, start with Step 7. Back up all data before making any changes.
Step 1
You might have to log out or reboot before a Flash update takes effect.
Step 2
In the Safari preference window, select
Privacy ▹ Remove All Website Data
Close the window. Then select
 ▹ System Preferences… ▹ Flash Player ▹ Advanced
and click Delete All. Close the preference pane.
Step 3
If you're only having trouble with YouTube videos, log in to YouTube and load this page. You may see a link with the text "Leave the HTML5 Trial." If so, click that link.
Step 4
If you get a warning of a "blocked" or "outdated" plug-in, then from the menu bar select
 ▹ System Preferences… ▹ Flash Player ▹ Advanced
and click Check Now. Quit and relaunch the browser.
If the warning persists, triple-click anywhere in the line below on this page to select it:
/System/Library/CoreServices/CoreTypes.bundle/Contents/Resources
Right-click or control-click the highlighted text and select
Services ▹ Open
from the contextual menu.* A folder should open. Inside it, there should be a file named "XProtect.meta.plist". If that file is missing and you know why it's missing, restore it from a backup or copy it from another Mac running the same version of OS X. Otherwise, reinstall OS X.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.
Step 5
Open this folder as in Step 4:
/Library/Internet Plug-Ins
Delete the following item, or anything with a similar name, if present:
Flash Player (failing).plugin
You may be prompted for your login password.
Step 6
Re-download and reinstall Flash. Download it from the domain "get.adobe.com". Don't click a link from any other website, including this one, because you can't trust links. They may be an attempt to trick you into installing malware masquerading as Flash. Type the address into the browser window. Never download a Flash update from anywhere else.
Step 7
If you get a "missing plug-in" error, select
Safari ▹ Preferences... ▹ Security
from the Safari menu bar and check the box marked
Allow (or Enable) plug-ins
Then click the button marked
Manage Website Settings...
if present and make sure that the website is not blocked for Flash.
Step 8
Select
Safari ▹ Preferences... ▹ Extensions
from the Safari menu bar. If any extensions are installed, disable them.

I switch on my mac book pro and all i get is the apple logo and below a loading wheel , but its stuck there for like an hour !!! help??

i switch on my mac book pro and all i get is the apple logo and below a loading wheel , but its stuck there for like an hour !!! help??

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a boot failure is to secure your data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since your last backup, you can skip this step.
There are several ways to back up a Mac that is unable to boot. You need an external hard drive to hold the backup data.
a. Boot into the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. The easiest way to deal with the problem is to boot from an external drive, or else to use either of the techniques in Steps 1b and 1c to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a boot failure can be resolved by resetting the NVRAM.
Step 4
If you use a wireless keyboard, trackpad, or mouse, replace or recharge the batteries. The battery level shown in the Bluetooth menu item may not be accurate.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to boot, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can boot now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've booted from an external storage device, make sure that your internal boot volume is selected in the Startup Disk pane of System Preferences.
Boot in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you boot in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, your boot volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 6.
If you can boot and log in now, empty the Trash, and then open the Finder Info window on your boot volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then reboot as usual (i.e., not in safe mode.)
If the boot process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select your startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then reboot as usual.
Step 9
Reinstall the OS. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 10
Repeat Step 9, but this time erase the boot volume in Disk Utility before installing. The system should automatically reboot into the Setup Assistant. Follow the prompts to transfer your data from a Time Machine or other backup.
Step 11
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a boot failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 12
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

I have bought a new Mac Book Pro, and I need to know how I can move Aperture from my old Mac Book to the new one..

I have bought a new Mac Book Pro, and I need to know how I can move Aperture from my old Mac Book to the new one..

It begins with: F-285-NER-151-QBQ-and continues with 5 more 3 or 4 letters/numbers..
Yes, that is the number. And what version of Aperture have you installed? The same version as on your old Mac?
But it don´t work on my new Mac...
In what way does it not work? Does it require you to enter a licence number for Aperture 2 as well? That will be necessary, if your serial number is an upgrade serial number. Then you will have to enter all previous numbers as well.
Or does Aperture not accept the number as correct? Then check the spelling; some letters are easily confused like "I" and "1" and "O" and "0". Do not use the number pad to enter the numbers.
See: Troubleshooting Professional Application Serial Numbers
Regards
Léonie

I am attempting to open MPEG4 files on my Mac Book Pro and it is saying that the file cannot be opened because a codec is missing. I downloaded both QuickTime Player 7.6.6 and also QuickTime Player MPEG2 and neither one of them are helping with my prob

I am attempting to open MPEG4 files on my Mac Book Pro and it is saying that the file cannot be opened because a codec is missing. I downloaded both QuickTime Player 7.6.6 and also QuickTime Player MPEG2 and neither one of them are helping with my problem.

riiimommy wrote:
I am not familiar with VLC, where can I download it?
VLC

I bought InDesign (Creative Cloud) on my Mac Book pro and recently bought an iMac. I want to use the software on my iMac now, can't figure out how?

I bought InDesign (Creative Cloud) on my Mac Book pro and recently bought an iMac. I want to use the software on my iMac now, can't figure out how?

All you need to do is install Adobe Creative Cloud application using which you can download InDesign cc app .
https://creative.adobe.com/products/creative-cloud
Reference :
https://helpx.adobe.com/creative-cloud/help/install-apps.html

I have Mac book pro- and can't install i work 08-it just comes up with a teminal thing when I click on install

I have Mac book pro- and can't install i work 08-it just comes up with a teminal thing when I click on install

Hi there
My version is 10.7.2 Lion. When I click on the icon for install i work cd. A white box comes up head line is says iwork08.mpkg-bash-80x24.And on apple line it is printed Teminal, like Safari or Finders when I am on one of dose. Hope you can help me. Charlotte

I want to take files from my PC (using a Seagate external hard drive) then plug this Seagate External hard drive into my Mac Book Pro and move the files from the Seagate External Hard drive onto my Time Capsule. I do not want to put these files on my Mac

I want to take files from my PC (using a Seagate external hard drive) then plug this Seagate External hard drive into my Mac Book Pro and move the files from the Seagate External Hard drive onto my Time Capsule. I do not want to put these files on my Mac. How do I do this? Where do I put these files on my Time Capsule? Will it affect the functioning of my Time Capsule?

Mixing files with data is not always great idea.
See info here.
Q3 http://pondini.org/TM/Time_Capsule.html
Why not just connect the PC directly to the TC by ethernet and copy the files over?
It is hugely faster and much less mucking around.
In windows load the airport utility for windows.. if you have not already as this will help you access the drive.
There is more info here.
http://support.apple.com/kb/HT1331

I have an Apple iphone 4s and for the last 4 weeks I cannot download or update any apps. I have an iPad and a Mac book pro and the apps download on these devices fine. My phone tells me that I have 12 updates but when I press update all or update any indi

I have an Apple iphone 4s and for the last 4 weeks I cannot download or update any apps. I have an iPad and a Mac book pro and the apps download on these devices fine. My phone tells me that I have 12 updates but when I press update all or update any individually nothing happens at all. It also does not ask me for my password any more but my iPad and mac book do.
I have signed in and out of the app store and the password is correct. I have tried both kinds of reboot but that did nothing. I have tried to update the apps by connecting phone to Mac book pro...it shows the apps being download on the Mac book and says it will sync them to my phone but it does not. Everything else on my phone works fine.
Any ideas ...Please!

Thank you, this has resolved both the iphone and ipad problem immediately. I am concerned that I may have a problem with apps that I bought under my old AppleID as they will not be recognised. Any suggestions for this please?

HT204380 i have a mac book pro and a i-pad 2. both of the devices have the same apple id and same mailing adress. if i want to make a face-time call from my mac book to i-pad 2. how can i do that?

i have a mac book pro and a i-pad 2. both of the devices have the same apple id and same mailing adress. if i want to make a face-time call from my mac book to i-pad 2. how can i do that?

You have to add another email address on one of the two devices that you can use as the "You can be reached for FaceTime at" contact address and then remove/uncheck the Apple ID email address as the contact address on that device. The way you are currently setup is like to trying to call yourself on your on phone - from your own phone.
Using the iPad as the example go to Settings>FaceTime>You can be reached for FaceTime at>Add another email address. Then add a working email address in the next window. Apple will verify the email. Go to the inbox of that email account, read and respond to Apple's email in order to complete the verification process.
Go back to Settings>FaceTime>Uncheck the Apple ID email address and make sure that the new email address is checked/selected (you will see it being verified again) and that new email address will be your contact address for the iPad.

Can i share all documents and files on my mac book pro and mac desk top using word

Similar Messages

Maybe you are looking for