Can I split a spreadsheet table over more than one page?

Is is possible to split a table so that data can be linked from page to page?
I would like to have a table with formulas on page 2 referencing data from another linked table on page 1 of a Pages document.
I know this used to be possible in Appleworks. In fact I have some old Appleworks docs like this, but when I try to open them in Pages they get scrambled. Any ideas anybody?

Thank you both for your help. It sounds as though the answer is "No, this can't be done"
Neither of the 2 options suggested quite fit the bill as my document is a text document report with embedded tables, which do need to refer to each other across more than one page, but still needs to be well laid out for printing and easy reading by others. It seems strange that something which was easy to achieve in Appleworks should be impossible in iWorks, since I thought this was meant to be the replacement program after Apple stopped developing Appleworks.

Similar Messages

  • CS3: Table on more than one page - How can I get the UIDRef's of the pages?

    Hi
    I have a table over more than one page. How can I get all UIDRef's of the pages who contain parts of the table?
    Thanks
    Hans

    Hi
    Thanks for the answer.
    - How can I get all page items of a table?
    - One other question: If I have a table over two pages (side by side) there is only one page item of the table. Right? How can I get the two pages (UIDRef) in that case?
    Thanks
    Hans

  • How to add the rows formatted as table headings, Tables headings are repeated when a table spans more than one page.

    Hi all,
    i am facing problem while generating Test Result word document after successful execution of TestStand.
    The Problem is :
    i want to add rows Formatted as table headings, table headings are repeated when a table spans more than one page(marked as Red).
    Example:
    Page  No. 1
    |     Test case Number  |  Test Step number      |
    |      100                         |            100                   |
    Page  No. 2
    |     Test case Number  |  Test Step number      |
    |      200                         |            300                   |
    Test Result word document should generate with Table headings(marked as Red) in every pages of the document, but i am not getting as per above example.
    Please through light on this.
    Regards,
    Susa.

    Hi Santiago,
    Thank you very much for your valuable reply.
    i want to generate MS-word report for TestStand after successful testing using MS-word2000.
    Test report contains Actual values, Expected values and Pass/Fail status.
    In my program i have customized all  fields i can able to generate test report which contains Verification engineer name , test mode, test date, start time, end time Actual values, Expected values and Pass/Fail status.etc....
    To put all values of test case number, Test step number, Actual values, Expected values and Pass/Fail status in to table for each time, i will
    insert a row into table every time values arrives, once the table exceedes its page size it moves to the next page, next page should start with table row header  but it start with  values of above said parameters.
    so i'm not able to repeat table row header for each page.
    Please find the attached file for your reference.
    Attched file expected.doc  :   This file contains what i wanted to generate MS-word report. Here table row header "Test Case Number and Test Step Number " is repeated in second page.
    Attached file Actual output from source code.doc   :  This report generated from the source code. Here table row header "Test Case Number and Test Step Number" is not repeated in second page.
    Do you know any property to set "repeat as header row at the top of each page" using MS-word ActiveX in CVI/Labwindows.
    i think this information is sufficient for you,
    Still if you need some information please ask me.
    Thanks
    Susa.
    Attachments:
    Actual output from source code.doc ‏25 KB
    expected.doc ‏26 KB

  • I have an HP Photosmart C4180 all in one printer scanner and copier, I can't figure out how to scan more than one page at a time and then send as a PDF file via email

    I have an HP Photosmart C4180 all-in-one, printer, scanner and copier.  I can't figure out how to scan more than one page?  It will only let me do one page at a time and then I have difficulty sending pages 1, 2 and 3 as one docuement.  Any ideas??
    Thank you, Jetteski

    Hello Jetteski,
    Hello Jetteski, Thanks for the post.
    Since you are running a MAC, check the below links for some excellent information on scanning.  Good Luck!
    http://goo.gl/M8Cl2
    http://goo.gl/cufK6
    http://goo.gl/OTQoR
    I work for HP but my posts and replies are my own....Thank you!

  • Can the new numbers export PDF as more than one page?

    I just upgraded to the new version of Numbers for OS X Mavericks and it seems I can not
    see my document as different pages or even export a PDF as several pages.
    Thanks,
    Alex Neuman

    Hi Alex,
    It took me a while to get my head around the difference between Export to PDF (everything on one page) and Print, where we can 'Print to PDF'.
    Do this:
    Menu > File > Print...
    You will see Print Preview. At the bottom of the panel on the right,
    click on Print. It won't print yet, but will take you here:
    Now we see Page 1 of 4 .
    Click on PDF to go here:
    Choose Save as PDF to a folder of your choice (mine is called Desktop Temp). In Finder, open that folder then double click on the PDF to open in Preview.
    Then Print from Preview.
    Phew.
    Regards,
    Ian.

  • How can I use the RMS.vi over more than one period?

    Hi everyone,
    I am using the Cycle average and RMS.VI to get the RMS value of a alternative voltage (2kHz). To acquire this signal I am using a differentiel AI of a 6225 card (at 250kS/s) and the RMS value is correct, it works fine. However from what I have understood, this VI calculates the RMS value according to only one period no matter how many samples I have acquired (2000 samples in the VI I have attached). Is this correct? If so, is ithere a way to use it over all of the 2000 samples to get a more averaged value? Or does another VI exist?
    I could repeat several time an acquisition of a short number of samples (a period) and make an average but it would take some time and I have to do this with 39 other Inputs on the same card one after the other...
    Thank you for your help,
    User
    Attachments:
    Forum.vi ‏76 KB

    User_1979 wrote:
    ....could you tell me if this VI sends a rms value of X compleat periods (even if I have send X periods and a half for example)?
    It gives the RMS value of only the newest set of data.
    The RMS and RMS Pt. By Pt. work for me, but it depends on how you break out that Dynamic Data from the Express VI, which was why I suggested you didn't use it - mainly because you can't tell what happens to that data when you wire it to a function and it coerces. Actually, I should say, I can't tell what happens to it. You may know, but I don't.  
    In the attached screenshot, I have "made" a 2k sine wave with an amplitude of 5. The indicators show RMS value.
    Richard
    Attachments:
    rms.gif ‏14 KB

  • How to repeat a row when tablix columns print over more than one page

    I have a tablix with 20 Columns.  When this prints it prints over 3 pages (which is
    OK).   The first Column is the Name (in this case it is the
    Project name).  On Page 2 & 3 I want to print the Project name again,
    so that a report user does not need to go back to page one to figure out which
    project the columns are referring two.  In Excel there is an option
    "Rows To Repeat".  I am trying to do the same in SSRS
    2012. 
    I have tried links
    like:
    http://msdn.microsoft.com/en-us/library/dd207045.aspx
    http://remicaron.wordpress.com/2010/01/05/how-to-get-ssrs-to-repeat-the-row-headers-tablix-2008/
    http://www.sqlcircuit.com/2012/03/ssrs-how-to-repeat-column-header-in.html
    These do not work
    for me .... in fact they return an error msg
    Can this be done?
    Tx
    Andrew
    Andrew Payze

    Hi Andrew,
    If I understand correctly, there are 20 columns in the table. When it prints over 3 pages, the report should repeat the first column in all pages.
    To freeze row header in the table, we can refer to the following steps:
    The table should have a group. If the Name is already a row group, we can directly refer to step 2. Or we need add a row group grouped by Name ahead.
    Right-click the table to open the Tablix Properties dialog box, then enable “Repeat header rows on each page” and “Keep header visible while scrolling” options under Row Headers category.
    If there are any other questions, please feel free to ask.
    Thanks,
    Katherine Xiong
    If you have any feedback on our support, please click
    here.
    Katherine Xiong
    TechNet Community Support

  • Repeating Frames running over more than one page

    Hi I have developed an Oracle Report. It is a nomination form having 7 to 8 pages. FYI..Input is a Pin Number. So, the customer can either enter one pin or can select many pins from the browser and depending on the selection he needs to either print one form or many forms at a stretch. So i want a repeating frame to be enclosed all the other frames. But if i do that, then i am getting an error
    "REP-1212: Object R_13 is not fully enclosed by its enclosing body" since the repeating i introduced spans over all the pages in the report.
    Please let me know the solution for this asap.
    Thanks in Advance

    Make sure the repeating frame is variable vertically and that all the frames that it encloses are variable.

  • Can I have one cell in a table extending over more than one column?

    I'd like to be able to have a table in which some cells extend over more than one column.
    In Word, I can just delete the right hand cell border, and the cell automatically stretches over the next column.
    (Pages 5.2.2.)
    Thanks

    Pages v5 is not an MS Word clone, and therefore, it doesn't matter what you did in Word. Select the adjacent table column cells, and then either two-finger tap, or right-click and choose merge cells from the contextual menu.

  • Persisting CMP bean over more than one table

    Hello,
    I was wondering if it is possible to persist an Entity Bean over more than
    one table using CMP. For example 3 attributes go in table A and 2 attributes
    go in table B.
    I can see this might come in handy when having some kind of inheritance in
    your architecture.
    Thanks,
    Rein Reezigt

    CMP are based on one DB object however object could be a database table or a
    view. You can create a view and base your bean on that view. This is mostly
    useful for read-only entity beans that just do select queries because databases
    have all kind of different restrictions on update froma view, ( for example
    ORACLE allows update to only one table in view). However in case you need a
    logical abstraction of multiple tables, consider EJB2.0 relations or a product
    like toplink for your object to relational mapping.
    Viresh Garg
    Principal Developer Relations Engineer
    BEA Systems
    Rein Reezigt wrote:
    Hello,
    I was wondering if it is possible to persist an Entity Bean over more than
    one table using CMP. For example 3 attributes go in table A and 2 attributes
    go in table B.
    I can see this might come in handy when having some kind of inheritance in
    your architecture.
    Thanks,
    Rein Reezigt

  • Tables with more than one cell with a high number of rowspan (ej. 619). This cell can not be print in a page and it must be cut. But I don't know how  indesign can do this action.

    Tables with more than one cell with a high number of rowspan (ej. 619). This cell can not be print in a page and it must be cut. But I don’t know how  indesign can do this action.

    set the wake-on lan on the main computer
    The laptop's too far away from the router to be connected by ethernet. It's all wifi.
    No separate server app on the laptop, it's all samba
    The files are on a windows laptop and a hard drive hooked up to the windows laptop. The windows share server is pants, so I'd need some sort of third party server running. Maybe you weren't suggesting to use Samba to connect to the windows share though?
    I'm glad that you've all understood my ramblings and taken and interest, thanks The way I see it, I can't be the only netbook user these days looking for this kind of convenience, and I certainly won't be once chrome and moblin hit the market.
    Last edited by saft (2010-03-18 20:38:08)

  • How can I sort a table using more than one column in Numbers or in Pages?

    How can I sort a table using more than one column in Numbers or in Pages?

    Hi Ron,
    On the right side of the Toolbar click the Sort and Filter button, then select Sort.
    You can then set up a multiple column sort.
    Click Add A Column, Specify the sort for that column, Repeat.
    Jerry

  • Can we use same program ID for more than one RFC scenarios

    Hi experts,
                I am working on a RFC to FILE scenario. I have created one TCP/IP connection in SM59 with a program ID. Can we use this program ID for more than one scenario. I have written code as below
    data: iquote type standard table of ZIQMD initial size 0,
          IPRODUCT type standard table of ZPMS initial size 0,
          wa_quote type ZIQMD,
          wa_PRODUCT type ZPMS.
    CALL FUNCTION 'Z_CBT_RFC_QUOTEMASTER'
      TABLES
        I_QUOTE       = iquote          .
    CALL FUNCTION 'Z_CBT_RFC_QUOTEMASTER' in background task DESTINATION
    'ID4'
      TABLES
        I_QUOTE       = iquote          .
      COMMIT WORK.
    CALL FUNCTION 'Z_CBT_RFC_PRODUCTMASTER'
      TABLES
        IPRODUCT       = IPRODUCT          .
    CALL FUNCTION 'Z_CBT_RFC_PRODUCTMASTER' in background task DESTINATION
    'ID4'
      TABLES
        IPRODUCT       = IPRODUCT          .
        COMMIT WORK.
    when i am executing the code like this. i am able to send the data to 'Z_CBT_RFC_QUOTEMASTER'  , but iam not getting data  for 'Z_CBT_RFC_PRODUCTMASTER'  interface. ID4 is the connection that i have created in SM59. with program ID as ABCD.
                  Can i use the same connection for all interfaces.Please help in this, if we can use same connection for all interfaces. then how to make changes in XI.
    Thanks in advance.
    Thanks & Regards,
    Poorna.

    Just tried this and I can confirm that my earlier understanding was correct!
    One of my colleagues confused me out and the conclusion is,
    1. You need a separate TCP IP Connection for every interface with a Unique program ID.
    Regards
    Bhavesh

  • How can I have more than one page open at a time?

    I would like to have more than one page open at a time- not tabs, but whole pages. How can I do this? I want to be able to have the pages side by side, instead of having to switch back and forth.

    Fox Splitter (formerly Split Browser): https://addons.mozilla.org/firefox/addon/4287

  • Populating more than one table and more than one field

    I need some suggestions and this forum has always been a great source of good advice.
    I have a web form at the following location: http://www.webdevpractice.com/genoptix/CE/register.php
    Here's what the web form needs to do:
    Send a confirmation email listing seminars the visitor checked on the form.
    Create a similar message on a confirmation page.
    Populate 2 two tables.
    Items 1 and 2 are working fine.
    The advice I need is on how to populate two tables in the database.
    There are three tables:
    ACCOUNTS
    account_id
    first_name
    last_name
    medtech_id
    job_title
    npi
    company
    city
    state
    email
    phone
    contact
    ATTENDANCE
    attendance_id
    account_id
    seminar_id
    SEMINARS
    seminar_id
    seminar
    speaker_first_name
    speaker_last_name
    date
    The web form contains data that need to go into the ACCOUNTS table and the ATTENDANCE table. The challenge is getting the account_id and seminar_id into the ATTENDANCE table. If all the information was inserted properly, I could write a query that revealed who was taking what seminar.
    Inserting data into the ACCOUNTS table is not a problem. I will create another form to insert information into the SEMINARS so that should not be a problem. But inserting the account_id and the seminar_id is what I am wondering about. Also, can more than one record be inserted in a table? If an user checks more that one seminar, each seminar (seminar_id) would need to be inserted in the ATTENDANCE table as separate records along with the account_id. I'm thinking I may have to do this manually. Also, the values for each seminar are their dates and titles. I used these as values to send the confirmations.
    I'm just looking for advice at this point. Is this doable?

    Bregent,
    The table I am wondering about is the ATTENDANCE table. There are two fields in addition to the primary key: account_id and seminar_id. The field I am concern with is the seminar_id which comes from a group of checkboxs on the form. So, one form could create several records. For example, presently there are three seminars that are offered. If the visitor selects all three seminars, that would create three records in the SEMINARS table. So, it might look like this:
    attendance_id     account_id     seminar_id
         1                    1                    1
         2                    1                    2
         3                    1                    3
    My PHP skills are basic. I've done other forms and use PHP in other ways. But I have never had to populate several rows in one table with an array of checkboxes nor have I be able to find an example of this.
    So the advice I am seeking (and perhaps this is premature) is this:
    Can one field from a table populate more than one record?
    Should I set up checkboxs as a group or individually with a different name?
    I am also considering setting up my tables differently so there is a table from each seminar--that may solve my problem.

Maybe you are looking for