Can I still create new sites in iweb and publish them to mobile me?

Can I still create new sites in iweb and publish them to mobile me? Also Can the sites not contain movies or photos, or just not a full gallery?

You can have as many sites and domain names on a single MMe account. However, only one site can use the CNAME domain name forwarding while the others must use URL forwarding.
Multiple Sites with Domain Name(s) in a Single MobileMe Account
Here's how to have multiple sites in a single MMe account with one or more sites having a domain name.
A. All sites are in the same Domain.sites2 files
1 - only one site can use the CNAME method of domain name forwarding and it must the top site in the left hand pane of iWeb.
Click to view full size
2 - the other sites must use URL domain name forwarding which directs the domain name to the site's full MMe URL, http://web.me.com/MMeUsername/SiteName, or, if there is no domain name, just MobileMe's full URL.
B. Each site is in its own Domain.sites2 file.
Again, only one site can use CNAME forwarding. This presents a problem since CNAME forwarding directs the domain name to the basic MMe account URL: http://web.me.com/MMe_Username/ which uses an index.html file in the root folder of the account, iDisk/Web/Sites. Each time a new site is published or an existing site uses the File->Publish Entire Site a new index.html file is created in that root directory, iDisk/Web/Sites folder, directing the browser to that particular site. This file is what the CNAME method uses to find the site it represents.
Therefore some steps must be taken to assure that the index.html file in the MMe Accounts root directory always points to the correct site. This can be accomplished is three ways.
1 - don't use the CNAME method. Just use URL forwarding . This, IMO, is the simplest method as it doesn't requre any additional effort on the user once the domain name has been set up.
2 - use the following method suggested by Wyodor in this topic: Is it possible to have multiple sites when using ur Domain name?
In iWeb domainfile 1:
Create a dummy site : _dummy
with a blank page.
Create your working site : Whatever
Add pages
Publish both Sites to the same same location on the same server.
Your _dummy site is now the default Site.
Check.
In iWeb domainfile 2:
Create/Use your CurrentSite.
Move a page to the top of the Site and back. Publish the Site.
iWeb will create a new index.html file in the root of the server and from now on CurrentSite is the default site.
Check.
From now on, never move your Whatever Site to the top of the list in the iWeb sidebar and never change the page in the _dummy site.
Simply do not touch your _dummy ever again. And never forget that.
3 - use Ethmoid's suggested method in Using two sites - setting one up with separate domain? or republishing the entire site that uses CNAME forwarding. Just making a minor change and publishing the site changes does not create a new index.html file.
The entire site must be republsihing in order to get that new site.
Or keep a copy of the CNAME site's index.html file on your Mac and replace it manually in the iDisk/Web/Sites fodler when necessary.
NOTE: the CNAME method provides a shorter URL: http://www.DomainName.com/Site_Name/PageName. CNAME does not have masking.
The URL forwarding displays the full MMe URL:
http://web.me.com/MMeUsername/Domain_Name/PageName.
With domain name masking that will be shortened to:
http://www.Domain_Name.com for every page of your site.
However, visitors will only be able to bookmark and enter at the first page of the site. If a page is refreshed the visitor is taken back to the first page. Also search engines will only be able to index the first page of the site.

Similar Messages

  • My iWeb image names are incompatible with FTP servers and must be renamed but I can't find the images in iWeb. I can upload to a desktop file and change them there but then I would need to download them to a new site in iWeb to publish them.

    my iWeb image names are incompatible with FTP servers and must be renamed but I can't find the images in iWeb. I can upload to a desktop file and change them there but then I would need to download them to a new site in iWeb to publish them. 
    What's the answer?
    Thanks 

    Many thanks to  responded to my question and sorry not to get back sooner.
    Yes, I discovered by this unfortunate experience that the names of photos are a serious issue if the site is to ever go to an FTP server.  Apple should discuss this carefully in their "manual".
    One more question:  I uploaded the website to a folder on my desktop. When I open it, unlike the photos in iWeb, there are folders for each page which have all the photos in them. I went through each folder and changed the names to be FTP compatible. I'm using iWeb SEO Tool which allows one to upload from this local folder to an FTP server but having trouble.
    Is this because there is an imbedment in iWeb that uses the old photo names to link to the actual photos and it can't find them because of the name changes?
    Thanks again for your help ...
    Phil McP

  • Is it possible to create 2 sites in iweb and publish only one when wanted?

    I use iWeb to create my website, I love it because it makes it easy for me to make and maintain my website. I'd like for my wife to be able to create her own website using iWeb also.
    I don't host with .mac and neither will my wife. I publish to a folder on my desktop and ftp my files to my host.
    My question is...can my wife and I both use iweb to design our websites seperatley and publish the sites seperatley? If so, how? When I publish to a folder it seems that everything in iWeb is published to the folder.

    Yes.
    There is software available on VersionTracker.com or MacUpdate.com called iWebSites (go to either site and do a search for it). It lets you create more than 1 resource file and lets you choose between them. As a result, you can have as many individual websites as you like and upload them individually.
    Hope this helps.

  • I need to create another site in dreamweaver and Publish it to

    I make a dreamweaver site with mx 2004, well now I need to
    create another site in dreamweaver and Publish it to the same site
    as prior but in a NEW Directory , what to do ?

    > Yes,what to insert at manage site > edit >
    advanced > remote info > Host
    > directory ?
    Try nothing at first. Connect to the remote site. Tell us
    what folder
    names you see there.
    > I try upload [with: ftp host:ftp://www.polis-land.com
    & Host
    > directory:/dialup/ =thenewfolder]but shows error [when
    press test at
    > advanced >
    > remote info] :
    That's wrong. Try this -
    Remote Host - www.polis-land.com
    Host directory - <blank>
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    ==================
    "123polis123" <[email protected]> wrote in
    message
    news:fl0uco$qpb$[email protected]..
    > Yes,what to insert at manage site > edit >
    advanced > remote info > Host
    > directory ?
    > to manage site > edit > advanced > remote info
    > ftp host ?
    >
    > I try upload [with: ftp host:ftp://www.polis-land.com
    & Host
    > directory:/dialup/ =thenewfolder]but shows error [when
    press test at
    > advanced >
    > remote info] :
    >
    > An FTP error occured - cannot make connection to host .
    The remote host
    > cannot
    > be found.
    > ???
    >

  • I created a website using iWeb, then published to MobileMe, how can i publish to iCloud?

    I created a website using iWeb, then published to MobileMe, Mobile Me is now closed, how can i publish to iCloud?

    iCloud does NOT allow you to host your web sites. You can continue to use iWeb but, will need a 3rd party web host to upload your websites to. Depending on the version of iWeb you are using you have a couple of publishing options:
    iWeb '09 (3.0.4) you can publish to an FTP Server or a local folder. ( With the built in FTP in iWeb you will end up with an address like "www.YourDomain.com/sitename/Home.html )
    iWeb '08 you can publish your website to a local folder
    I have been using IX Webhosting for several years with little to no problems "usually the problem was something I did" and they have been quick to solve any issue I have come across. The have plans that start at $3.95 a mo (USD) and their customer service is top notch.
    http://jeffnitschke.com/IXWebHosting.html
    http://jeffnitschke.com/wordpress/2012/06/how-do-i-move-my-mobileme-site-ix-web- hosting-blog/
    "I may receive some form of compensation, financial or otherwise, from my recommendation or link."

  • I want to make a new site in dreamweaver and host it on business cstalyst

    I want to make a NEW site in Dreamweaver CC and host it on the Business Catalyst platform.But it seems the only way to use dreamweaver in business Catalyst is to import a BC template into Dreamweaver then upload it to BC. I want to create an original site and use the BC platform, is that possible? This seems like it should be simple and automatic, even encouraged. But as of now the only way to create an original site is to use Adobe Muse. Which is weird, seems like Adobe missed this one somewhere...

    I don't think you understand: I want to open Dreamweaver and build a brand new site, then when I am done I want to host the dreamweaver site on the Business Catalyst platform. I dont want to use anything in BC to build the site, I just want to use the hosting platform. I do not want to import a BC site into dreamweaver or anything like that. I just want to use BC the same way I would use godaddy, or uhost or any other hosting provider. Based on your response you said that "of course its possible to build a BC site in Dreamweaver" I dont want to build a BC site, I want to build a Dreamweaver site and host it on the BC platform. Like I said before it doesnt seem like this is possible. As of now we can only build a new site in MUSE and integrate it into BC without using a BC template. Can you understand what I am saying. I DONT WANT TO USE A BC TEMPLATE, I WANT NOTHING TO DO WITH BC WHILE I AM BUILDING THE SITE WITH DREAMWEAVER, JUST LIKE MUSE DOES.

  • I created a site in iWeb, I have a new computer. Where I can download the app to update my page on the internet.

    I created a site in iWeb, I have a new computer. Where I can download the app to update my page on the internet.

    Julianauip wrote:
    So the only way would be to buy iLife?
    If you don't have the old computer's install disks, that is indeed the case.
    Incidentally you don't need to post a duplicate response - all posters see all posts in a thread.

  • I bought a new iMac.  iWeb and all folders migrated over, no problem, but I cannot bring up my website - it only seems to allow for creating a new site.

    I bought a new iMac.  iWeb and all its folders migrated over, no problem, but I cannot bring up my website - it only seems to allow for creating a new site.

    You need the 'Domain' file in which iWeb keeps its data. This lives by default in (user)/Library/Application Support/iWeb. You need to locate it on the old machine and copy it to the same position in the new machine. Note that it is the Library folder in your Home folder, not the one at root level.
    This folder is hidden on Lion and above; to access it, in the Finder go to the ‘Go’ menu and hold down the Option (Alt) key; the Library folder will appear as a choice. In Mavericks you can make it permanently visible - open your Home Folder the from the Finder's View menu, choose show View Options and check Show User Library.

  • Can't create new sites in Dreamweaver CS3.  Help!

    I am trying to create a new site in Dreamweaver CS3 but keep
    getting the following error:
    "The action cannot be completed because the other program is
    busy.
    Choose 'Switch to' to activate the program and correct the
    problem"
    I have tried every documented solution on the adobe website
    and other discussion forums and still cannot get past the problem.
    I have restarted the IIS server on my local PC as documented
    on the following adobe technote:
    http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_16485&sliceId=2
    Other things I have done:
    1. I have followed all the advice in the links at the bottom
    of the above page.
    2. I have created a new user, logged into that and tried
    creating a site with a "virgin" environment
    and I still have the problem.
    3. I have gone into the registry and renamed the site
    configuration info in case something was corrupted.
    This removed all my site configurations. No help!
    4. I have turned of my firewall and restarted the IIS
    server.
    5. I have searched the web for anything even remotely
    similar to this error and tried every tip out there.
    I called Adobe and they referred me back to the technote
    above, which I had already tried.
    One last bit of info. I can't create new sites, but I can
    edit web pages in my existing sites. However, I cannot change the
    configuration of the website in the Manage Sites area (i.e. I can't
    push the Edit button).
    Has anyone had this problem? Any help would be appreciated. I
    have hit a brick wall on this one and am trying to meet a deadline
    on a new website I need to create.
    If I can't find a solution quick, I will be an
    ex-Dreamweaver user. That saddens me because I really like
    Dreamweaver, but I have to perform on my job.

    And are you running Skype?
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    ==================
    "Murray *ACE*" <[email protected]> wrote
    in message
    news:ga4hba$bnv$[email protected]..
    > What is your firewall?
    >
    > --
    > Murray --- ICQ 71997575
    > Adobe Community Expert
    > (If you *MUST* email me, don't LAUGH when you do so!)
    > ==================
    >
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    >
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    > ==================
    >
    >
    > "Steven A" <[email protected]> wrote in
    message
    > news:ga4ejo$8nb$[email protected]..
    >>I have rebooted many times. Actually, I am the only
    user that ever logs
    >>in.
    >> This is happening on my laptop. I just created
    another user to see if it
    >> was a
    >> corruption issue with sites tied to my regular
    login.
    >>
    >>
    >>
    >

  • Created new site, now can't update.. please help!

    I created my new site in IWeb 08 after the upgrade. My old site stayed in IWeb until I was done replicating it. I did pull the blog from the old site to the new site so I wouldn't lose my entries.
    Everything looks great in IWeb. However when I publish it goes through the creating pages stuff and finishes. But instead of telling me go visit my page, it tells me my .mac membership expires in 2 weeks and ask if I want to renew. It's set to automatic renewel so I'm not going to renew it again.
    The funny thing is. Prior to me adding my videos and photos in I could publish fine. I actually see the first part of what I published fine. Just can't publish anymore. I noticed that after I do publish I have to restart IWeb before I can publish again because it won't recognize that the files have changed.
    Could this be because I have too many photos / videos? Is this what it would do. I have about 7 qt 1-2 minute videos, and one 19 minute qt video. Then I have about 200 photos.
    I have the minimum .mac storage account. 5 GB i think? I didn't cross that i doubt.
    Thanks!

    As an update. Now I publish it and it's going through the motions... I just never get the confirmation that it was published. But all my pages turn blue to indicate they have been... Only they really wern't updated. I close IWeb and come back and they are all red. I repeat the upload process... file, upload all to .mac... logging in... creating page x...y...z... dissapears. Pages turned blue, nothing is update.
    Help!

  • I have created a site with iWeb. I have replaced the iWeb Nav bar with a vertical one I made myself. Problem is, my top button disables itself if it overlaps into the "hidden" nav bar area. I can cmd click and drag it into this area, but then all the rest

    I have created a site with iWeb. I have replaced the iWeb Nav bar with a vertical one I made myself. Problem is, my top button disables itself (and the animation doesn't work) if it overlaps into the "hidden" nav bar area (indicated by a blue rectangle). I can cmd click and drag it into this area, but then all the rest of my site is pushed down the page. Don't know what to do about this. I don't know how to bring the rest of the page up without dragging it also into the designated nav bar area. Also, by doing this, is it affecting my site in ant way? see my site here at www.steveburrowsimages.com
    The home page is with it all draged into the nav bar area and the about page is with is outside the nav bar area (notice that the top button does not animate or work as a button.
    Getting confused here. Anyone got any ideas?

    Well, you made a good start with SEO by getting rid of the iWeb default navigation since it doesn't help the spiders and, out there in the real world, there are more people than you would think with javascript turned off in their browsers.
    One of the downsides of iWeb is that it doesn't allow for the alt attribute in the img tag. Its well worth adding these to give you extra keywords even if you have captioned all your images. Use iWeb SEO Tool for this...
    http://www.iwebformusicians.com/Search-Engine-Optimization/Tags.html
    iWeb, just like most drag and drop software, creates a huge amount of code which causes the pages to load slowly in the browser. Running you files through an optimizer will help to reduce this problem and further reduce the size of image files even beyond the initial optimization you do before loading them into iWeb...
    http://www.iwebformusicians.com/Search-Engine-Optimization/Optimize.html

  • Can i create a website in iweb and convert it to wordpress?

    Can I create a web site in iweb and then convert it to wordpress?

    Yes, you can create a website in iWeb.
    To convert the published pages, ANY webpage, to WordPress depends om your skills to do so.
    Start here : http://www.google.com/search?q=convert+webpage+to+wordpress

  • SharePoint 2010 - Create new site collection in existing web application with different existing content DB

    I have a SharePoint 2010 root level site collection SC1 in web application WEBAPP1. I want to create copy of that site collection in same web application WEBAPP1. Apart from Import/Export, Restore/Backup options, will following approach work? If yes , how?
    I took backup of content database of web application.
    Restored database with different name
    Mounted Content database to this WEBAPP1 by assigning new ID to DB
    Created new site collection by using this newly mounted DB
    Site collection gets created successfully but content does not appear.
    Please guide if i can achieve desired functionality by using this approach.
    If this helped you resolve your issue, please mark it Answered

    It is because the Site GUID is identical, and each GUID can only be present on the farm once. You can use Backup-SPSite/Restore-SPSite (which is full-fidelity, unlike Export-SPWeb/Import-SPWeb), which will generate a new GUID for the restore Site Collection,
    even in the same Web App.
    Trevor Seward
    Follow or contact me at...
    &nbsp&nbsp
    This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • Problem creating new sites. The formula refers to a column that does not exist

    Good morning,
    I have a problem creating new sites in my development environment. We have a template which works properly when we create new sites with it. However, when we add one new content type in the site created and save it as a new template, we can't create new sites
    with this template. The error log is that there are one problem in one column [The formula refers to a column that does not exist.  Check the formula for spelling mistakes or change the non-existing column to an existing column]. 
    I have opened the wsp template with visual studio but I can´t discover what column is the problem because the log only refers to the feature (ListInstances).
    Anybody knows how to find my problematic column?
    The error is:
    Feature Activation: Threw an exception, attempting to roll back.  Feature 'plantilla Llave en Mano 20141222 v2ListInstances' (ID: '6c61a3bf-3c51-4064-958b-d154729233e7').  Exception: Microsoft.SharePoint.SPException: La fórmula hace referencia a una
    columna que no existe. Compruebe que la fórmula no tiene errores ortográficos o cambie la columna que no existe por otra que exista. ---> System.Runtime.InteropServices.COMException (0x81020057): La fórmula hace referencia a una columna que no existe. Compruebe
    que la fórmula no tiene errores ortográficos o cambie la columna que no existe por otra que exista.     at Microsoft.SharePoint.Library.SPRequestInternalClass.UpdateField(String bstrUrl, String bstrListName, String bstrXML)     at Microsoft.SharePoint.Library.SPRequest.UpdateField(String
    bstrUrl, String bstrListName, String bstrXML)     --- End of inner exception stack trace ---     at Microsoft.SharePoint.Administration.SPElementDefinitionCollection.ProvisionListInstances(SPFeaturePropertyCollection props, SPSite site,
    SPWeb web, Boolean fForce)     at Microsoft.SharePoint.Administration.SPElementDefinitionCollection.ProvisionElements(SPFeaturePropertyCollection props, SPWebApplication webapp, SPSite site, SPWeb web, SPFeatureActivateFlags activateFlags, Boolean
    fForce)     at Microsoft.SharePoint.SPFeature.Activate(SPSite siteParent, SPWeb webParent, SPFeaturePropertyCollection props, SPFeatureActivateFlags activateFlags, Boolean fForce)
    Thanks in advance

    Hi Enrique,
    According to your description, after added a content type into the new site and save the site as a template, there is an issue when creating another new with the newly
    site template.
    Based on the error message “The formula refers to a column that does not exist…”, seems that it would be an issue of a Calculated column in the content type you added,
    please go through all the Calculated column in that content type to see if the formulas all work well.
    Feel free to reply if there any progress.
    Best regards,
    Patrick
    Patrick Liang
    TechNet Community Support

  • I created a website with iWeb and can't remember who is the web hosting service. How can I find it.

    I created a website with iWeb and now I have forgotten what web host I signed up with.  How can I find out? The website is still working.

    Hi,
    Do you have a link to that Website?

Maybe you are looking for

  • URGENT HELP NEEDED (Bios Settings Failed)

    Hey Guys, I am having problems with my MSI Board, and don't know what to do.  I am very much a noob to BIOS/and modding so I apologize in advance.  You guys helped me a few months ago getting everything up and running and all was great for months.  T

  • How do I solve this?

    I am using java for the first time and my new pc cannot compile programs written in java language. It always read "'javac' is not recorgnized as an internal or external command, opperable program or batch file". The following information may be helpf

  • Cant see iphone music when connected to itunes.

    There is music stored on my phone and I would like to change it. Usually I can do this by connecting it to ituens and deleting it all and then refilling it. Now it is showing in iTunes as having no music even though there is and it can be played from

  • Paying too much?

    Does anyone else feel like they are paying too much? I have been with Verizon for 3 years now and my bill for 5 people is about $300 a month. I called to see if I could get any sort of lower rate for being a customer for so long and I was given the o

  • Ciscoworks LMS 4.0 DFM Custom Traps

    Hello, We want to use Ciscoworks LMS 4.0 for Access Control List Monitoring. i.e. if we end the ACLs with "log" entry, we may send  the ACL deny logs to the Ciscoworks as Syslog or Snmp Trap format. With "debug snmp packets" command we may observe th