Can I style Web Forms Confirmation Page Results - Specifically the "ERROR" message in the results?

Hi,
Can I style Web Forms Confirmation Page Results - Specifically the "ERROR" message in the results?
{module_webformresults} is auto rendedered as a table with CSS IDs attached but nothing specific for the ERROR message - resulting in the error not being seen.
The ERROR is triggered by a dulplicate User Name or Password.
I tried using a JQuery text selector, but it does not work with the results for some reason.
Any ideas?
Attached is are the error results, see Username
Thanks!
P

Hi Patrick,
It should work. You know the id of the specific area, you know what string to search for in order to condition the appearance of the new message.
Kind Regards,
Alex

Similar Messages

  • TS3276 Can't open web addresses from an email-get an ERROR message saying-no application could be found

    Can't open web addresses from an email-get an ERROR message saying-no application could be found

    Hi, I had the same problem. I finally figured it out. Plug in the USB cord to your ipad, but beofre plugging it into your computer make sure your ipad is not in the locked or sleep mode. Once I did this, my photos showed up and started downloading. Hope that helps you!

  • I have an error message "page_bottom_overlay-2.png" which comes up when I try to publish.  There is a large X with a Question mark in the middle over the entire background of the page.  The error message says the file is missing.  I did not delete files.

    I have an error message "page_bottom_overlay-2.png" which comes up when I try to publish.  There is a large X with a Question mark in the middle over the entire background of the page.  The error message says the file is missing.  I did not delete files.  How can I find files that seem to be missing?

    This is probably one of the files that is required by the template you are using.
    These files are inside the iWeb app. Control click the iWeb app icon and select "Show package contents".
    You need to dig down through the folders and files to find what you want...
    Contents/Resources/da.lproj/Templates/
    If the file is missing you would need to re install the iWeb app...
    http://www.iwebformusicians.com/iWeb/iWeb-Tips.html

  • When I try and Save for Web in Photoshop CC I receive an error message saying 'The operation cannot be completed. The requested operation cannot be perfomed on a file with a user-mapped selection open'.

    When I try and Save for Web in Photoshop CC I receive an error message saying 'The operation cannot be completed. The requested operation cannot be performed on a file with a user-mapped selection open'. This happens with any of my files not just one in particular...
    Can anyone help solve this please?

    ELEMENTS 12 AND ELEMENTS 13
    Upgraded to 13 Thinking might resolve the issue.
    Was working fine up until we had "Tech" come in the office and "up grade some stuff"
    then all of a sudden i started getting this message, something happened but i don't have a clue what.

  • My 160MB iPod Classic won't sync from iTunes.  This is a recent problem.  The error message is "The iPod cannot be synched.  An unknown error occurred (-39)." The end result is that music will sync but photos will not.  Current software on Mac and iPod.

    My iPod classic won't synch from iTunes.  This is a recent problem.  The error message reads "The iPod cannot be synched.  An unknown error occurred (-39)." The end result is that the music will sync but photos will not sync.  I am running current versions of software on the iPod and the iMac / iTunes.  HELP! J

    First try to resolve #2 by:
    See
    iOS: Device not recognized in iTunes for Windows
    - I would start with
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or               
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Featurs appin the Window Control Panel. Then reinstall all the Apple software components
    - New cable and different USB port
    - Run this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    - Try on another computer to help determine if computer or iPod problem
    If you can resolve #1 and still get same message for #1 then you have to restore the iPod like the message says.

  • I installed a new printer and now Photoshop Elements tells me I can't print.  The error message is "The saved printer information is not compatible with this version of Photoshop Elements, or the saved printer is no longer available.  You will need to che

    I installed a new printer and now Photoshop Elements tells me I can't print.  The error message is "The saved printer information is not compatible with this version of Photoshop Elements, or the saved printer is no longer available.  You will need to check your printer settings before printing."  I have uninstalled and re-installed Photoshop Elements, checked my printer settings and still I can't print a photo.

    Hi ,
    Please update to PSE 13.1
    13.1 has solved this problem.
    Refer to this link.
    Photoshop Elements Help | Printer errors with Photoshop Elements 13

  • HT1819 Podcasts that I had subscribed to with my old computer are invisible in the Itunes store with my new computer. The error message says the podcast is not available in the US. Yet I can still download them on my old computer. How can I fix this probl

    Podcasts that I had subscribed to with my old computer are invisible in the iTunes store on my new computer. The error message says the podcast is not available in the US. Yet I could still download the podcast on my old computer before I switched. How can I fix this?

    Hello, ted_marx38. 
    Thank you for visiting Apple Support Communities.
    The most common cause for this issue would be media present that is purchased with another Apple ID.  When prompted to authorize the computer it may show a different Apple ID.  If this is the case, the computer will need to be authorized for this Apple ID.  The article below will walk you through the process of verifying if that is the case or correcting the issue if not.
    iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
    http://support.apple.com/kb/TS1389
    Cheers,
    Jason H.

  • I have new IPad ...can't watch rented downloaded movie on my tv..error message is " The connected display is not authorized to play protected movies"... What is up with that???

    I have new IPad ...can't watch rented downloaded movie on my tv..error message is " The connected display is not authorized to play protected movies"... What is up with that???

    I had exact same problem and I have found a way to get round out!!!! Easy!
    So the reason it doesn't allow it to play is for security to stop piracy etc.
    Plug in the cable and VGA and aux cable and get everything set up so you are looking at the home screen.
    1) select Videos
    2) selected the film you want to watch
    3) click the little play button
    4) it will then come up with the message saying it can't play protected films blah blah blah
    5) WITHOUT clicking ok double tap the home button to bring up the multitasking bar and swipe left to reveal the control panel
    6) hold fast forward for a second or two and the movie with continue to play!
    Stay in the multi tasking bar with the control panel, The message will stay there but don't worry. Kick back and enjoy your iPad movie on the big screen:)
    I'm sure your saying thanks:) it was my pleasure realising I've outsmarted apples little security protection thing lol

  • I tried to download a book I bought but failed. The error message contains "The operation couldn't be completed. (Product Integrity error 9918). Anyone can help?

    I tried to download a book I bought but failed. The error message contains "The operation couldn't be completed. (Product Integrity error 9918)". Anyone can help?

    If this is something you attempted to purchase and download through the iTunes store, then contact iTunes support. http://www.apple.com/emea/support/itunes/contact.html

  • How to delete the error message in the Web page Message Monitoring

    Hi All:
    I'd like to ask a question.If there is error message in the T-code sxmb_moni->Monitor for Processed XML Messages,I can cancel the error message manually and archive the message. After that,I can delete the message from "Monitor for Processed XML Messages".
    But after those operation,I find in the web page " Message Monitoring", there are still messages in the "Messages from Component Integration Server and/or Adapter Engine".
    How can I delete those message both successful and error.
    Thanks All
    Elliott

    Hi Elliot,
    SXMB_ADM
    Integration Engine Configuration
    Specific Configuration
    Category: DELETION
    Parameters: PERSIST_DURATION, PERSIST_DURATION_ERROR
    Subparameters: SYNC, ASYNC
    Change "Current Value".
    and execute your delete job again!
    Regards,
    Udo

  • How to display the error message during the web dynpro application runtime

    hi,
        I'm a java developer,During i 'deploy and run ' a web dynpro application on server-1,if the application have some runtime errors. there are displayed many infomation about the runtime error,such as exception track,etc.
        But when i do the same on server-2,there just show something like:
                500   Internal Server Error
                                    SAP NetWeaver Application Server 7.00/Java AS 7.00
                Failed to process request. Please contact your system administrator.
    but the server-1 will stop the j2ee engine. 
    how can do i make server-2 show detail error message as server-1. when i debug web dynpro application need these infomation.
    Appreciate your inputs...
    (Note:server-1 and server-2 have same software version)
    Edited by: BingLin Zhong on Feb 18, 2008 2:13 AM

    The Sap-Notes 962319:
    1. Check in the Visual Administrator, "Licensing Adapter" -> "General" -> "SystemType" !
    If it is set to "DEVELOPMENT_MODE", verbose error messages are shown.
    If it is undefined, proceed with the next step.
    If it is set to something else, only exception IDs are shown. In this case the only chance is to search for this exception ID in the default traces.
    2. If the system type is undefined, then in the Config Tool "Configurations" -> "webdynpro" -> "sap.com" -> "tcwddispwda" -> "Propertysheet default" -> "DevelopmentMode" is evaluated. If it is "true", verbose error messages are shown.
    3. If verbose error messages are required but still the short version is shown, you probably face an error message that is not raised by Web Dynpro but by other components of the NetWeaver. In the Visual Administrator set "Properties" -> "HTTP Provider" -> "DetailedErrorResponse" to "true".
    4. In addition to the error page shown in the browser or client, important messages - including error messages and stack traces - are written to the log and trace files, e.g. to the default traces usr\sap\<SID>\<instance>\j2ee\cluster\server<number>\log\defaulttrace.trc.<number>.
    a) In some cases, when an exception ID is included in the error message, the detailed error message can easily be retrieved in the log file.
    b) When no exception ID is given, you have to search for the detailed error message in the log specifying time stamp and/or user ID.
    Always consider restarting the system after making changes on the settings.
    It is not recommended to switch the "SystemType" to an inappropriate value just for viewing verbose error messages. The system type potentially affects framework, applications and licensing in an perhaps unintended way.
    In the past there was no distinction between different system types regarding error messages. For security reasons this distiction has been introduced. It is not intended to show stack traces in non-development systems in the future. SAP does not provide workarounds or patches to enable such a behaviour again.

  • Why the validator can't display the error message on the popup dialog?

    I have input text with a validator and a custom ok button and a cancel button on the popup dialog.When I click the ok button,the validator will validator the input value on the input text,but it just close the popup dialog without display the message firstly.The point is it does validate the value but doesn't display the message.Can anybody help?

    It seems if I use the button which is associated with the dialog the validator works well,but if I use the custom button the error message doesn't display. the environment is 11g.
    the code of the page is :
    <af:form>
    <af:popup id="copyPopupDialog" contentDelivery="lazyUncached">
    <af:dialog title="validator" closeIconVisible="false" type="none">
    <af:inputText id="copyReportsetCode" styleClass="" label="code"
    value="11"
    validator="#{reportSetManagedBean.validatCode}"></af:inputText>
    <f:facet name="buttonBar">
    <af:panelGroupLayout layout="horizontal" halign="right">
    <af:commandButton text="ok"/>
    <af:commandButton text="cancel" immediate="true"/>
    </af:panelGroupLayout>
    </f:facet>
    </af:dialog>
    </af:popup>
    <af:commandButton text="commandButton 1">
    <af:showPopupBehavior popupId="copyPopupDialog"/>
    </af:commandButton>
    </af:form>
    the code of the managedbean is:
    package david;
    import javax.faces.component.UIComponent;
    import javax.faces.context.FacesContext;
    import javax.faces.validator.ValidatorException;
    import org.apache.commons.logging.Log;
    import org.apache.commons.logging.LogFactory;
    import java.util.regex.Pattern;
    import javax.faces.application.FacesMessage;
    import javax.faces.application.FacesMessage;
    import javax.faces.application.FacesMessage.Severity;
    public class ReportSetManagedBean {
    public ReportSetManagedBean() {
    public void validatCode(FacesContext facesContext, UIComponent uIComponent,
    Object object) {
    FacesMessage msg = new FacesMessage("eror");
    throw new ValidatorException(msg);
    }

  • How can i get the error message from the thrown/raised exception?

    DB version:10gR2
    Examples for this thread taken from
    Want Stored Procs to get exectuted regardless of preceeding SPs Success or
    I have a package with several functions and procedures inside.I created a caller procedure called callProcs, which will execute various procedures within the package in the appropriate order.
    In the below example i cannot get the error message thrown from line 20
    create or replace package body mypackage
    is
    variable_proc1 number;
    variable_proc2 number;
    variable_proc3 number;
    v_result       number;
    my_exception   exception;
    procedure proc1
    is
    begin
    select 8/0 into variable_proc1 from dual;
    exception
              when others
              then raise my_exception; ----line 20
    end;
    procedure proc2
    is
    begin
    select 1 into variable_proc2 from dual;
    exception
              when others
              then
                   null;
    end;
    procedure proc3
    is
    begin
    select 3 into variable_proc3 from dual;
    exception
              when others
              then
                   null;
    end;
    Procedure caller_proc
    is
    begin
    proc1;
    proc2;
    proc3;
    v_result:=variable_proc2+variable_proc3;
    dbms_output.put_line('The output is '||v_result);
    exception
              when my_exception
              then
    dbms_output.put_line('Heyyyyy the error is '||SQLERRM); -- exception caught at line 64 of caller proc
    end;
    end mypackage;
    When i try executing the caller proc, i don't get the error. Instead i get the text User-Defined Exception as shown below
    set serveroutput on
    exec mypackage.caller_proc;
    Heyyyyy the error is User-Defined Exception
    PL/SQL procedure successfully completed.Edited by: user10633418 on Mar 10, 2009 11:30 PM

    Thank you justin.
    Sorry my earlier post was a bit ambiguous.
    I wanted the error generated at proc1 to be captured at caller proc's Exception handling section (line 64) so that i could log the error to an ERR_LOG table.
    I can actually log this error at proc1 itself like
    exception
    when others
    THEN
    error_message :='My custom message for the particular proc '||SQLERRM;
    dbms_output.put_line(error_message);
    logerror(error_message); --an autonomous error logging proc
    raise;But there is a RAISE statement in proc1's exception handling, so the exception gets propogated to caller proc's exception handling section {color:#ff0000}*and another redundant row will be created at ERR_LOG table for the same error because there is a*{color}
    logerror(error_message);--an autonomous error logging proc
    in the WHEN OTHERS section of exception handling section of the caller proc
    I want to avoid the creation of this redundant row in ERR_LOG table.

  • I am having difficulties loading pages. For example: I am on the powerschool web site looking at my child's grades. I want to get into a specific class and the page either takes many minutes to load or I get the error message that the page can't load. He

    Can't get into specific class grades. It's not just here though; many pages load and load and load taking an extremely long time only to get an error message.
    == URL of affected sites ==
    http://ps.hibbing.k12.mn.us/public/home.html

    Hello, could this be it?
    Java for OS X 2012-006: How to re-enable the Apple-provided Java SE 6 applet plug-in and Web Start functionality
    http://support.apple.com/kb/HT5559

  • How can I update my itunes when I keep getting an error message saying the network path is not available

    I am trying to update my itunes  to 11.0.1, I can download it but when I install I keep getting an error message that states:    the feature you are trying to use is on a network resource that is unavailable. Click ok to try again or enter an altenate path to a folder containing the installation packagr itunes64.msi* in the box below.  use source: C:\Users\owner\AppData\Local\Apple\Apple Software Update\    
    Nothing helps? what do I need to do?

    The servers are getting slammed by millions of people wanting to upgrade..   just give it some time, and soon enough you'll have your upgrade.

Maybe you are looking for

  • Strange response time for an RFC call viewed from STAD on R/3 4.7

    Hello, On our R/3 4.7 production system, we have a lot of external RFC calls to execute an  abap module function. There are 70 000 of these calls per day. The mean response time for this RFC call is 35 ms. Some times a few of them (maybe 10 to 20 per

  • My Imac keep crashing

    I bought an iMac 27in 3.4ghz Intel i7 in February of this year. The last month it has been crashing, not during use, but if I leave it for an hour or so. Interval Since Last Panic Report:  454555 sec Panics Since Last Report:          8 Anonymous UUI

  • REDEFINING QUERY

    Hi aLL, COULD ANY HELP ME OUT BY DIRECTING ME TO WHERE I COULD REDEFINE THE QUERY FOR QUICK REPORT ON ZENWORKS 7? Whenever I launch the quick report it gives this message thT IT Cnnot retrive more than 500 WS that the query for quick report has to be

  • Unable to edit My Settings

    My daughter put her name as an alia in my account and I am trying to change it to my name. When I try to delete the alia in My Settings the page closes without making the change. I am also unable to edit my own name but am able to make other changes.

  • Configuring Appraisal template to ESS/MSS

    Hi Friends, I have created a appraisal template. But I am not able to see it in either MSS or in ESS. How to configure the appraisal template is for which Managers and to which employee group/sub group Thanks Vimal