Can I turn off auto tab loading, if no, question about uninstalling newest version of firefox

I tend to wind up with far too many tabs open at one time to not bog firefox down. I came up with a very useful workaround - close and re-open firefox with it disconnected from the internet.
Thru version 3.6.19 this works beautifully, because when it can't find the internet, it loads all of the tabs as "problem loading page." They load quickly but don't use much memory and don't bog Firefox down that way. Then I connect to internet, and work the the tabs at my leisure. That way I have many tabs of pages I'm interested in ready for me, but only a few actually open and using memory etc.
When I upgraded to the newest Firefox version, I had a lot of tabs already open but I discovered my workaround trick no longer works. As soon as I reconnect the internet, all the 'problem loading' tabs automatically start loading the full/real pages.
QUESTION 1: Is there a way I can turn this function off, at least for awhile until I can work thru the set of tabs I already had loaded when I upgraded?
QUESTION 2: Is there a way I can easily/quickly break a single window with a bunch of tabs into multiple windows? I mean WITHOUT having to handle each tab one by one...
QUESTION 3: Is there some way to get a window listing all tabs and windows where I can delete selected tabs, while I have that window open? The dropdown on the righthand side of the page doesn't work for this, because it shows them all as 'problem loading page' rather than showing the url (or maybe there is a way to change the display in the dropdown menu?)
Since I discovered this problem, I re-installed Firefox 3.6.19 (leaving the new Firefox version on the computer too). I did NOT make a new profile because I wanted it to see the session manager set of tabs I had already, my preferences & passwords, etc.... I am running 3.6.19, but I suspect it is having some problems because of both versions being on the computer with the single profile however, as its crashing more often and using more memory & CPU... I also tried to save the window in session manager (which I had before I loaded the new firefox), but got an error message.
QUESTION 4: Is this likely the problem, e.g., two firefox versions but no new profile? IF so, is there a way to duplicate the profile so each firefox version has it's own, but both are identical?
QUESTION 5: If uninstall the new Firefox, will the 3.6.19 version still run properly, with my profile, settings, session manager saved sessions, etc. all still intact?
Thanks in advance for your help, I really need it!!

Maybe:
*Multiple Tab Handler: https://addons.mozilla.org/firefox/addon/multiple-tab-handler/

Similar Messages

  • How can one turn off auto-correct on safari?

    How can one turn off auto-correct on safari?

    Right click on a word  in an editable area.
    Then choose  Spelling and Grammar.
    Click "Correct Spelling Automatically" to remove the tick mark if it is on to disable the feature.

  • How can I turn off auto-renewal for subscriptions? I have been in the manage my account but I can't see any other option than to auto-renew?

    how can I turn off auto-renewal for subscriptions? I have been in the manage my account but I can't see any other option than to auto-renew?

    Follow the instructions in this article. You can turn off the auto-renewal on either your i-device or via iTunes on your computer:
    Manage your auto-renewing subscriptions - Apple Support
    Cheers,
    GB

  • Images won't open in my gmail or websites can anybody help me? this happend when i updated to the newest version of Firefox

    Question
    Images won't open in my gmail or websites can anybody help me? This happen when I updated to the newest version of Firefox

    If images are missing then check that you aren't blocking images from some domains.
    See:
    * http://kb.mozillazine.org/Images_or_animations_do_not_load
    * Check the permissions for the domain in the current tab in Tools > Page Info > Permissions
    * Check that images are enabled: Tools > Options > Content: [X] Load images automatically
    * Check the exceptions in Tools > Options > Content: Load Images > Exceptions
    * Check the "Tools > Page Info > Media" tab for blocked images (scroll through all the images)
    There are also extensions (Tools > Add-ons > Extensions) that can block images.
    * [[Troubleshooting extensions and themes]]

  • I only want my home page on start up. I do NOT want all my tabs restored. How can I turn off auto restore?

    I just want to turn OFF auto restore

    Check your home page settings and be sure that you do not have "Show my windows and tabs from last time" selected. Tools > Options > General > "When Firefox starts:"
    See: http://support.mozilla.com/en-US/kb/Options+window+-+General+panel
    <u>'''''Other Issues'''''</u>: ~~red:You have installed plug-ins with known security issues. You should update them immediately.~~
    <u>'''Update Java'''</u>: your ver. 1.6.0.13; current ver. 1.6.0.20 (<u>important security update 04-15-2010</u>)
    (Firefox 3.6 and above requires Java 1.6.0.10 or higher; see: http://support.mozilla.com/en-US/kb/Java-related+issues#Java_does_not_work_in_Firefox_3_6 )
    ''(Windows users: Do the manual update; very easy.)''
    ~~red:Check your version here~~: http://www.mozilla.com/en-US/plugincheck/
    See: '''[http://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox#Updates Updating Java]'''
    Do the update with Firefox closed.
    <u>'''NOTE:'''</u> Java version 1.6.0.21 has been released. It is mainly an update for developers of Java applications and most users do not need to be concerned about downloading version 1.6.0.21. <u>'''''At this time'''''</u>, the update option in existing installations of Java 1.6.0.20 are not updating to version 1.6.0.21; <u>'''''at this time'''''</u>, it must be manually downloaded and installed. According to the Java release notes:
    ''"'''Bug Fixes'''''
    ''Java SE 6 Update 21 does not contain any additional fixes for security vulnerabilities to its previous release, Java SE 6 Update 20. Users who have Java SE 6 Update 20 have the latest security fixes and do not need to upgrade to this release to be current on security fixes."'' Source: http://java.sun.com/javase/6/webnotes/6u21.html
    <u>'''You '''</u>~~red:<u>'''MAY'''</u>~~<u>''' need to Update Adobe Reader for Firefox (aka Adobe PDF Plug-In For Firefox)'''</u>: your ver. N/A; current ver. 9.3.3 (important security update release 06-29-2010; see: http://www.adobe.com/support/security/bulletins/apsb10-15.html)
    ~~red:Check your version here~~: http://www.mozilla.com/en-US/plugincheck/
    See: http://support.mozilla.com/en-US/kb/Using+the+Adobe+Reader+plugin+with+Firefox#Installing_and_updating_Adobe_Reader
    ''<u>You may be able to update from the Adobe Reader installed on your system</u>'' instead of going to the Adobe site and downloading. Open the Adobe Reader installed on your system (''in Windows, Start > Program Files, find and click Adobe Reader to open''), click Help, click Check for Updates. Allow the download/update to occur. If you use this method, no need to proceed with the instructions below, <u>'''but'''</u> do look at the two bulleted items at the bottom "'''<u>NOTE for IE:</u>'''" and "Also see:". Restart Firefox and check your new version here: http://www.mozilla.com/en-US/plugincheck/
    ''<u>If you go to the Adobe site to download the current Adobe Reader:</u>''
    -'''<u>use Firefox to download</u>''' and <u>'''SAVE to your hard drive'''</u> (save to Desktop for easy access)
    ~~red:-See the images at the bottom left of this post to see the steps to take on the Adobe site~~
    -exit Firefox (File > Exit)
    -In Windows: check to see that Firefox is completely closed (''Ctrl+Alt+Del, choose Task Manager, click Processes tab, if "firefox.exe" is on the list, right-click "firefox.exe" and choose End process, close the Task Manager window'')
    -In Windows: double-click on the Adobe Reader installer you just downloaded to install/update Adobe Reader
    *<u>'''NOTE: On Vista and Windows 7'''</u> you may need to run the plugin installer as Administrator by starting the installer via the right-click context menu if you do not get an UAC prompt to ask for permission to continue (i.e nothing seems to happen). See this: http://vistasupport.mvps.org/run_as_administrator.htm
    *'''<u>NOTE for IE:</u>''' Firefox and most other browsers use a Plugin. IE uses an ActiveX version. To install/update the IE ActiveX version, same instructions as above, except use IE to download the ActiveX installer. See: [[ActiveX]]
    *Also see: http://kb.mozillazine.org/Adobe_Reader ~~red:'''''AND'''''~~ [[How do I edit options to add Adobe to the list of allowed sites]]

  • How can I turn off auto-capitalization for Mail in Mountain Lion?

    How can I keep mail.app from capitalizing the first letter of sentences?  I have turned off auto-correct both at the system level and in Mail, and yet I cannot seem to keep Mail from capitalizing the first letter?

    Thanks - this helped me track it down - some Textexpander setting apparently got switched when I updated.

  • Can't turn off auto correct

    Im having trouble with turning my auto correct off.
    I just updated to yosemite, and i can't turn off the auto correct.
    I've gone into settings > keyboard > Text > and un ticked the auto correct box, but it will not stop auto correcting.
    Ive had this problem with my previous version of OS X as well.
    anyone got any suggestions? i do a lot of typing with abbreviations, and its changing things all the time.

    Since I updated my iPad to iOS 5 - spell check works erratically and sporadically as well so I have issues with the way this whole thing works.
    Have you tried resetting the Keyboard Dictionary? Settings>General>Reset>Reset Keyboard Dictionary. It is a totally different setting that really shouldn't impact auto correct all - its merely a suggestion borne out of the "Throw enough crap against the wall and hope that something will stick" mentality.
    If nothing else works, another standard procedure would be to restore your iPad. If you can restore from a backup that predates this issue, that should work for you.

  • I can't turn off auto correct on iPad

    When I type an emai, the auto correct above the keyboard keeps suggesting words. I have gone into Settings-General and turned off Auto-Correction (and everything else too). But when I type an email or go into Safari on my iPad, it keeps suggesting words that makes no sense and makes it very inefficient for me. Does anyone know why even after turning auto correction off, it still is enabled?
    Thanks

    Since I updated my iPad to iOS 5 - spell check works erratically and sporadically as well so I have issues with the way this whole thing works.
    Have you tried resetting the Keyboard Dictionary? Settings>General>Reset>Reset Keyboard Dictionary. It is a totally different setting that really shouldn't impact auto correct all - its merely a suggestion borne out of the "Throw enough crap against the wall and hope that something will stick" mentality.
    If nothing else works, another standard procedure would be to restore your iPad. If you can restore from a backup that predates this issue, that should work for you.

  • How can I turn off auto-correct in my iPad?

    Is there a way to turn off auto-correct in my iPad? It makes unwanted changes, and distracts me from my writing. I was able to turn off auto-correct in Safari on my Macs, and that has made things much better.

    Good stuff, King Peguin. Now life is good.
    Thanks,
    Gregory

  • How can I turn off auto-hide menu bar in Terminal app?

    This is soooo anoying.   Open terminal app in fullscreen mode, open a few tabs, now when you move your mouse to the top to click on a new tab, the menu bar shows itself and covers the tabs.
    I want to turn off this feature to auto-hide the menu bar.  I would much rather have it move all the tabs down a bit when the menu bar apprears.
    Any ideas to help fix the issue?

    Can't turn that off. It's a feature of full screen mode. If you place your mouse at the bottom of the tab you want to select, the Terminal Menu bar doesn't pop up for me.

  • How can I turn off auto arrange?

    I uploaded some photos to my computer from two different cameras and arranged them all so they would be in the correct order together. When I tried to then upload them to Facebook, I clicked "select photos" which brought up the photos for me to choose but they were arranged out of the order I had put them in. I clicked the view menu and saw that "Auto Arrange" was checked, so I unchecked it but it did not arrange the photos back to the way I had them. How can I make it to where they will show up in the order I put them in when I bring them up in Firefox to upload to a website?

    "None" does not show up in my "arrange by." There are several sorting options available but no way to turn them off, nor to keep the icons from slamming to the right side of the screen. There must be some way to turn this auto arranging off. I don't want all my desktop icons on the right, and I don't necessarily want one of the few apple sorting options.
    Does any one have a soltion? Please!
    Cpto

  • Can I turn OFF auto dialing?

    I have a new iPhone 3G 8gb. I am looking for a way to turn off the auto dial feature when you tap on a recent call, favorite, etc. I keep accidentally dialing people...would like to find a way to prevent that. I look forward to suggestions!! Thanks.

    There is not a way to do so except for not selecting a Favorite or a recent call. The Favorites option is designed for this very thing - a speed dial for the people you call most often, and select a recent call does the same.
    You can select on the far right - the area with the right facing arrow in a blue circle icon and the number will not be automatically dialed. This can be used to view the contact info for a favorite, or to add a recent call to the address book if not already entered.

  • Can You Turn Off Auto Spell???

    I want to turn off the stupid auto spell, everytime I try to type something it changes my word to something else. does anybody know if and where it can be done? ive looked everywhere.

    This does not totally answer your question, but if you just click on the word it is 'suggesting' - it will not change the word - but use the one you typed. I agree it is kinda helpful - but annoying at the the same time....I could personally live without it.

  • Can't turn off auto update

    I want to turn off automatic update notification for flash.  I can get to the global notification setup page and uncheck the automatic update, but there doesn't appear to be any kind of save settings button or anything on that web page.  So all I do is close Internet explorer after unchecking the autoupdate box.  If I then reopen internet explorer and go back to the flash global notifications page, the check for updates box is checked.  How do I shut it off???
    Thanks,
    Bob

    Thanks, but the page you linked to, is the page I was using, and restarting
    the computer makes no difference.  I can uncheck auto update, but when I bring up the setting again, it is rechecked.
    Any other suggestions?  If it matters, I'm in windows xp sp3 single user, with admin rights on the account.
    Thanks,
    Bob

  • Can't turn OFF auto-brightness sensor 2015 X1 Carbon

    When I take my laptop outside, the maximum brightness actually goes down a notch or two (it should go up!) so I'm thinking even though I am manually upping the brightness to maximum, the sensor is overruling me.  Maximum indoor brightness is higher than maximum outdoors because of the sensor - go figure! 
    Is there a way to turn off the auto-brightness sensor on a 2015 X1 Carbon?
    I've seen others with 2014 X1's say you can turn off the ALS (Ambient Light Sensor) in the Devices Control Panel under Sensors but there is no such setting for me in my 2015 X1.  I looked everywhere I could but can't find that toggle anywhere.
    2015 3rd Gen. X1 Carbon (i5-5300U+256GB SSD+QHD (2560x1440) IPS Multi-touch)
    Solved!
    Go to Solution.

    Lenovo-Ron wrote:
    I've seen others with 2014 X1's say you can turn off the ALS (Ambient Light Sensor) in the Devices Control Panel under Sensors but there is no such setting for me in my 2015 X1.  I looked everywhere I could but can't find that toggle anywhere.
    do you need to disable the ALS hardware?  is turning off Windows' adaptive brightness good enough?  if so, go into power profile(s) and disable it, see guides like
    http://lifehacker.com/disable-windows-annoying-adaptive-brightness-feature-on-1567886994
    usually that does the trick

Maybe you are looking for

  • SOURCE_PACKAGE and DATA_PACKAGE are incompatible in the start routine.

    Hi All,    I have seen similar posts on the forums, but none relate to my issue. Here is what I am seeing.    I have installed a cube, DSO and transformations b/w the cube and the DSO from the business content. The transformations cannot be activated

  • TO priotization for putaway-- materials(refrigerated or dangerous goods)

    Hi experts, In a business scenario where refrigerated, dangerous goods are managed, we want to create a scenario with following requirement. 1. When a material with above properties arrive then they should be given the first priority for put away or

  • Local Radius Authentication - Fails

    Hello all, Access Point 1230AG (c1200-k9w7-mx.123-2.JA) Client Adapter ABG (PCI) I am new to Wireless Lan configuration with Aironet products (first project). I am configuring an Access Point for a small LAN and i can not get local radius authenticat

  • Importing table using Open Hub - (BODI - 1112339)

    Hi all We could connect to the open hub for SAP BW 7.0 hosted in a remote server . Then tried to import the tables created there. However it stops us with: " Error: Cannot import the metadata table xxxx. Parser detected an unknown data type. Please n

  • Backup IPHOTO Book to Cd or DVD to Save?

    After creating an Iphoto book, is there a way to save the project to CD or DVD to save ? Thanks