Can i update my iphone 3G with IOS 4.1 to IOS 5?, can i update my iphone 3G with IOS 4.1 to IOS 5?
can i update my iphone 3G with IOS 4.1 to IOS 5?, can i update my iphone 3G with IOS 4.1 to IOS 5?
wheewhee wrote:
can i update my iphone 3G with IOS 4.1 to IOS 5?, can i update my iphone 3G with IOS 4.1 to IOS 5?
No
It will only go to 4.2.1
Similar Messages
-
I have a 3rd generation iPod Touch and just did the update to IOS 5. Now I can't connect to my Netgear wifi router. My iPhone connects fine along with all of my other laptops etc. I have the router set with WPA-PSK [TKIP] security and an access list. I've confirmed the mac address is included on that list and that the password is correct. Under choses netwrok I select the network and it just goes into a spin. I have tried removing the password and the access list settings and it still will not complete the connection to the router thus no internet access. The routers firmware is also up to date. This thing worked fine before this update and I've already tried to restore from backup. Any ideas or is the wifi nic bad in this thing with the new apple firmware update? Any fix?
Thanks Bob, I don't know why but it all of a sudden worked a few days later. It's a mystery but at least problem solved.
-
I have an iphone 4, with ios 4.3.3. I want to update it but when I connect it to itunes it says that it is the latest version of the software. So I cannot update it, and I need it very bad. Can anyone help me?
What version of iTunes do you have installed? If you are trying to update to iOS 6 you need iTunes 10.7 or later.
-
I tried to update my iphone 3gs from ios 5 to 6 but because of software crash and while restoring with ios 6 it is not activated. Now I degrade it in ios 4 and can not use any app. How can I update this iphone?
Downgrading the iOS is not supported, and likely has caused the problems you are experiencing.
You'll need to go elsewhere for support. -
how can i get upgrade the ios x v 10.5.8? I purchased an iphone 5 but cannot connect with my macbook 5. I cannot update itune 11 as my ios is not up to date
Start by checking if you can run Snow Leopard:
Requirements for OS X 10.6 'Snow Leopard'
http://support.apple.com/kb/SP575
OS 10.6 Snow Leopard is once again available from the Apple Store:
http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
and in the UK:
http://store.apple.com/uk/product/MC573/mac-os-x-106-snow-leopard
but nobody knows for how long it will be available.
To use iCloud you have to upgrade all the way to Mountain Lion:
http://support.apple.com/kb/HT4759
You can also purchase the code to use to download Lion (Lion requires an Intel-based Mac with a Core 2 Duo, i3, i5, i7 or Xeon processor and 2GB of RAM, running the latest version of Snow Leopard), or you can purchase Mountain Lion from the App Store - if you can run that:
http://www.apple.com/osx/specs/
When you have installed it, run Software Update to download and install the latest updates for Snow Leopard. -
Last year I brought from China (I am in Australia) an IPhone 3GS with operating system of 4.1 This IPhone came brand new in box etc. I want to update the operating system because a lot of the apps need newer software, however It will not work properly or update. Why?
Your headline says iPhone 3GS, but your text says 3G.
iPhone 3G is not compatible with iOS5. 3GS is. -
good evening i have an problem with my iphone 4 the wif and network cant on now if i tray is showing iTunes i tray to reload the ios is showing an error -1 can you help me
No problem, glad to help!
Update: my PC USB hub was connected to a USB 3 port, I connected the 30 pin cable directly to my PC, And the restore worked just fine. Restored phone from iCloud backup and seems to be working fine. -
After the iOS 7 update my iPhone 5's touch screen is unresponsive some times ,can't even open the lock screen , I had to turn the phone off and turn it on again ,any solutions ?
Hello kumarsenthil210317
Check out the article below to start troubleshooting issues with touchscreen response.
iPhone, iPad, iPod touch: Troubleshooting touchscreen response
http://support.apple.com/kb/ts1827
Regards,
-Norm G. -
Hi everyone! I tried to install the new iOs 7 on my iphone 4, but it wasn't completed (showing error 4005). Now, my iphone is stuck on the itunes' logo with the usb cord, and I can't use my phone. And itunes doesn't detect my iphone when I connect it on my computer, so I can't put it in recovery mode or someting like that... What can I do?? I tried everything they tell me to do in the apple support but nothing seems to work. Thank you!
No problem, glad to help!
Update: my PC USB hub was connected to a USB 3 port, I connected the 30 pin cable directly to my PC, And the restore worked just fine. Restored phone from iCloud backup and seems to be working fine. -
Hi Team,
I have iphone4 16GB with iOS 5.1.1. While using the phone, few times the phone is automatically going to shutdown and getting call disconnected. Some times, it happens more frequently in a day, sometimes not.
and also, How can I update my iphone 4 from iOS 5.1.1 to iOS 6.1.4 only. I am not looking for iOS 7 right now. Please suggest the update process?You cannot. You can only upgrade to the currently supported version of the iOS which, at this time is iOS 7.0.2.
-
I did an icloud backup on my old 4S with iOS 8.3 and wanted to install on my new iPhone 6 but it only has iOS 8.1.3! Can I do/use the backup after I chose "install as new iPhone"?
Because I cannot update the software until I chose if I want to begin with a new phone setting or download a backup.
But the backup is of course not compatible with the old iOS.
So will it be possible to get the new iPhone going, then do the software update to 8.3 and then download / use the data from
my 4S icloud backup?1. Settings > General > Software Update > Update the to 8.3
2. Settings > General > Reset > Erase All Content & Settings
3. Reactivate phone and follow prompts to restore iCloud (or iTunes) backup. -
How do I fix the compatibility issue between my iPhone 4S with iOS 7 and my Pioneer car stereo? There was no problem with iOS 6, but now I get a message saying "this device is not compatible" and so I can't use Netflix for example. How do I fix it?
This is a typical response from the manufacturer. Did you try the fix that Lawrence mentioned. When Apple or any other phone manufacturer update phone software, they have the latest Bluetooth installed. It is usually the problem with the radio manufacturer that they devices are using the older Bluetooth protocols. You can try this support document http://support.apple.com/kb/TS3581 and see if anything there helps, but generally it requires the radio manufacturer to update their firmware.
-
I need to restore my iphone 4 with just ios 5, but it only lets me restore it with the latest version which is ios 5.0.1. What can I do??
Restore it using the computer it normally syncs with, this should not require an iOS update.
-
Got Iphone 6 updated to IOS 8.0.2, now I can't use it as everything became too large on screen and its not responding?
Hi ka_tin,
I apologize, I'm a bit unclear on the exact nature of the issue you are describing. If the largeness you are seeing is related to the Accessability Zoom function (a feature that allows you to zoom in on the screen for people with vision issues), you may find the following page helpful:
Zoom - iPhone
Regards,
- Brenden -
I updated iOS in iPhone 5 just now... But I can not download/install apps (Skype,Facebook etc.) from apple store...it shows error code -1009... What can I do...?
The error 1009 error is normally associated with a blocked country. There are a list of countries that Apple is not allowed to sell their software to due to US restrictions
-
Hello
I would like to ask I have a problem with the Iphone 3gs 32 g
I don install the ios 6.0 and now I can not activate the sim card .... I do not even know what's centenary advise me thank youDid you already try the suggestions from this article?
Symptoms
In certain situations, iPhone may present one of the following symptoms:
"Invalid SIM" or "No SIM Card installed" alert appears intermittently.
Status bar displays "No Service", "No SIM" or "Searching" in a location with good network coverage.
Resolution
If you encounter any of the above symptoms on your iPhone, try these steps to attempt to resolve the issue:
Update your iPhone to the latest version of iOS.
Toggle Airplane mode On and Off.
Try turning iPhone off and then on again.
Check for a carrier settings update. Tap Settings > General > About. If an update is available, a prompt will appear.
Remove the SIM Card and verify that it is a valid, carrier-manufactured SIM. Also verify that it is not damaged, worn, or modified. Then reinsert it.
Restore the iPhone.
copied from iPhone: Troubleshooting No Service or No SIM
Maybe you are looking for
-
How do I find all pictures with no (empty) keyword ?
I have decided to import all my pictures into LightRoom. A lot of my older pictures are not registered with any keywords :( - only with IPTC location information. My plan is to systematic go through all my pictures and add relevant keywords to all pi
-
I'm looking for a program that will tell you, when a list is uploaded to a table, what values in the list are NOT in the table. The program would have other optional fields as well. For example, you would enter the table name and field names. So to
-
hi i have created a table student with fields client, student id and student name in which student id fieldu2019s domain maintain fixed values 1,2,3,4,5,6,7,8,9,10. now i have to Create a report which should take input student id and name, and shoul
-
Dear Experts, I was working on Pay Scale Structure & Pay Scale Grouping. We did the UAT 2 days back. Everything came as desired(Pay Scale Type, Pay Scale Area, Pay Scale Grouping,Wage Types & their default amounts). Client signed the UAT document. I
-
Name of the computer is constantly changing
I have a mac Pro 2010 on a network in which I have a macbook, a macbook pro and an airport Express all connected by wifi to the same base station. The problem is that I frequently get in the Mac Pro the warning that another computer is using the name