Can I use 9i imp/exp utility after installing 10g

Hello, all:
I have two database co-exist in one machine, one is 9i, another one is 10.2, which was just installed recently . Now I need to imp/exp the 9i database, I can't invoke 9i imp/exp utility anymore, even under 9i oracle_home, I can only get 10g's imp/exp screen comes up, can someone help me? Is there anyway that I can use both version of utility in the same machine?
Thanks a lot in advance.
wendy

I can't invoke 9i imp/exp utility anymoreThat might be because the 10G_ORA_HOME\BIN appears first in your PATH environment variable. Either put 9i_HOME\BIN first in your PATH or navigate to the BIN directory of 9i home and run the export/import from there.
C:\>exp
Export: Release 10.2.0.1.0 - Production on Wed Oct 25 09:31:50 2006
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Username: ^C
C:\>
C:\>cd Oracle\ora92\bin
C:\oracle\ora92\bin>exp
Export: Release 9.2.0.7.0 - Production on Wed Oct 25 09:32:03 2006
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Username: ^C
C:\oracle\ora92\bin>

Similar Messages

Upgrading IMP/EXP utility in ORACLE 10g

Hi,
I have installed Oracle 10g 10.2 Enterprise edition.Can I upgrade the the version of the EXP/IMP utility od my oracle so that i can import dump files which are exported from Oracle 11g 11.2 version.
Thanks in advance,
Anindya

user13006709 wrote:
Hi,
I have installed Oracle 10g 10.2 Enterprise edition.Can I upgrade the the version of the EXP/IMP utility od my oracle so that i can import dump files which are exported from Oracle 11g 11.2 version.
Thanks in advance,
Anindya
No, you must use the imp utility from target database which is 10g.
Cheers

Can't use parallels desktop ver.7 after installed OS X Mountain Lion

Dear All
Everyone has solution to fix this issue ? I can't use the parallets desktop ver.7 after installed os x mountain lion.
Please advice.
Thanks & regards

Hi,
Make sure you have the most current build of Parallels 7 - it works well fro me, and the other poster, so unless you have some lind of issue internally, it should work for you.
Try doing a repair permissions from Disk Utility. I needed to do that to get Quicken Essentials to work.
Cheers,
M.

Imp Exp utility in ubuntu 10.4 with oracle instant client 10

Hi,
I have a problem with the imp/exp utility on Ubuntu 10.4.
I have installed the oracle instant client 10, and I have followed this thread
[http://download.oracle.com/docs/cd/B25329_01/doc/admin.102/b25107/impexp.htm#CHDDBGDF]
So, I've set env variable in my .bashrc
ORACLE_HOME=/home/lucia/Programmi/instantclient10_1
export ORACLE_HOME
LD_LIBRARY_PATH=/home/lucia/Programmi/instantclient10_1:${LD_LIBRARY_PATH}
export LD_LIBRARY_PATH
PATH=/home/lucia/Programmi/instantclient10_1:${PATH}
export PATH
SQLPATH=/home/lucia/Programmi/instantclient10_1:${SQLPATH}
export SQLPATH
Sqlplus works fine, but when I try to use the utility exp/imp
exp DB_USER/DB_PW@DB_SCHEMA owner=DB_USER buffer=300000 LOG=DB_USER.log FILE=DB_USER.dmp compress=n
I have the following error:
No command 'exp' found, did you mean:
Command 'xep' from package 'pvm-examples' (universe)
Command 'ex' from package 'vim' (main)
Command 'ex' from package 'nvi' (universe)
Command 'ex' from package 'vim-nox' (universe)
Command 'ex' from package 'vim-gnome' (main)
Command 'ex' from package 'vim-tiny' (main)
Command 'ex' from package 'vim-gtk' (universe)
Command 'axp' from package 'axp' (universe)
Command 'expr' from package 'coreutils' (main)
Command 'expn' from package 'sendmail-base' (universe)
Command 'epp' from package 'e16' (universe)
exp: command not found
(I cannot use data pump exp)
Any suggestions?
thanks in advance.
Lucia

root@laptop:~# /tmp/CVU_11.2.0.1.0_lucia/runfixup.sh
Response file being used is :/tmp/CVU_11.2.0.1.0_lucia/fixup.response
Enable file being used is :/tmp/CVU_11.2.0.1.0_lucia/fixup.enable
Log file location: /tmp/CVU_11.2.0.1.0_lucia/orarun.log
[: 845: true: unexpected operator
[: 860: unexpected operator
Any suggestions?
thanks
LuciaHello,
I had the same problem. It was related to the shell script interpreter being used: it is really a bash script asking to be interpreted as sh. For the impatient, the solution was to change the first line of the script orarun.sh to read as:
#!/bin/bash
Explanation:
1. The script runfixup.sh calls orarun.sh. The latter is the one that fails starting at line 845.
2. The script is really a bash script as can be seen from the if syntax used. For example at line 191 we see the double equall sign ==:
if [ "`echo $SET_KERNEL_PARAMETERS | tr A-Z a-z`" == "true" ]
3. The bash man page says:
string1 == string2
string1 = string2
True if the strings are equal. = should be used with the test command for POSIX conformance.
string1 != string2
True if the strings are not equal.
(End of man page excerpt)
Notice in particular that for a bash script to be POSIX it should avoid the == and just use =
4. orarun.sh has on its first line #!/bin/sh. On my Ubuntu system, sh is a softlink to dash and the dash man page says:
s1 = s2 True if the strings s1 and s2 are identical.
s1 != s2 True if the strings s1 and s2 are not identical.
5. So this script script uses bash syntax but is interpreted by dash. It is possible that this worked fine for the Oracle developer if on their system sh was softlinked to bash (which is often the case). Apparently, one should then be very careful to not use idioms that are not POSIX compliant.
6. Another solution is to change the /bin/sh softlink from dash to bash. Personally, I was less comfortable doing this (the possible repercussions were wider than the proposed solution above).
After making the change, the script ran perfectly. I think the best solution is for Oracle to update the script to be POSIX compliant or to identify itself as bash.
Hope that helped,
Mark Gaber
Edited by: user1112514 on Jun 30, 2010 3:28 AM

What can I use my Droid Charge for, after I upgrade to the new Samsung Galaxy S2 for VZW on Sept 8?

what can I use my Droid Charge for, after I upgrade to the new Samsung Galaxy S2 for Verizon on September 8?
I guess it can run fine on Wi-Fi and become a media player.... or is there a market for 1-month-old Droid Charge phones?
How much trade-in value can I get from VZW or BestBuy or Amazon?
Thanks!

http://www.droid-life.com/2011/08/03/leaked-verizon-roadmap-reveals-potential-launch-dates-for-stratosphere-vigor-bionic-and-more/
DROID Bionic: (9/8 launch) – You already know everything about this device, don’t you?
Samsung Stratosphere: (9/8 launch) – 4G LTE device running Android 2.3
HTC Vigor: (10/6 launch) – Will replace the HTC Thunderbolt
LG Revolution 2: (10/20 launch) – Will replace the original Revolution
Samsung Galaxy Tab P8 (November launch) – Could be the 8.9″ Galaxy Tab?
Samsung Illusion: (9/29 launch) – 3G smartphone running Android 2.3
Samsung Plato: (January launch) – whatever it is, it was pushed to 2012
HTC Bliss: (9/29 launch) – Lower end Android 2.3 device; the chick phone?
Motorola XOOM 4G LTE: (9/8 launch) – Assuming this is the date that the 4G LTE upgrade starts. Also when the 4G LTE version will be in stores.

TS1441 when i pluged my ipod classic 5g to PC then it shows "iTunes has detected an iPod in recovery mode. you must restore this iPod before it can be used with iTunes"?then after restoring the PIOD when IPod restarted then Itunes again detect the same ER

when i pluged my ipod classic 5g to PC then it shows “iTunes has detected an iPod in recovery mode. you must restore this iPod before it can be used with iTunes”?then after restoring the PIOD when IPod restarted then Itunes again detect the same ERROR.

If you are using XP, and you went through the procedure at the bottom of the previously linked document to change the iPod's assigned drive letter, and you also tried putting it into Disk Mode...
If you have not already, try shutting down your computer and disconnecting all USB devices, including hub. Start up with only standard keyboard and mouse connected. Just to be safe, put the iPod into Disk Mode again
http://support.apple.com/kb/HT1363
Run iTunes. Connect iPod to a direct USB port on computer. iTunes may prompt you about "recovery" and ask you to do a Restore. Try to do a Restore again.

How do you solve error "You can't use this version of the application Install Mac OS X.app with this version of Mac OS X" when trying to go back to leopard from lion?

How do you solve error "You can't use this version of the application Install Mac OS X.app with this version of Mac OS X" when trying to go back to leopard from lion?
Local Mac shop said to hold down "c" after inserting disk to get "disk utility" to come up in order to wipe hard drive. I can't seem to get it to do this.

This W7 was purchased for using Fusion, as others did - per reviews from amazon. The technician today called their contact at VMWare - Fusion not officially for use with Lion - even though I read at the VMWare support site that others have made it work. Apparently my setup doesn't work.
Do you know how to do the proceedure for bringing up the disk utility when starting the disk?
BTW, some of the windows applications I want to continue using are Incredimail, Calendarscope, Stamps.com and a few others I have used over many years. What do you use for email and calendar?
Wow, sounds like another reason to not use MS Windows.
Regarding your Disk Utility question, please elablorate I'm not sure what you're trying to do. Disk Utilty is just that...a utility, it's something most users never have to use especially on a new computer. Let me know what you're trying to do there before I give you some instructions.
As for as your Windows apps I would recommend using Mail and iCal, both come as part of OS X and are very robust tools. Don't discount the software built right into OS X it's very robust and powerful not all like the bloatware most Windows boxes ship with. Stamps.com well I'd look for another alternative. It's clear they don't support OS X which makes me a little suspicious that they're so behind the times.
Also if you have not been exposed to these links before I'd strongly recommend bookmarking them and using them. They're extermely useful!
Switch 101
Mac 101
Find Out How Video tutorials

How to repair disc on second partition iMac 27? 10.6.8, but second is still 10.6.3. Can I use the original 10.6.3 install disc to start, and then go to the side needing repair?

Partitioned iMac 27, Sept. 2010. Verify disc on HD2 says "corrupted, needs repair," unspecified. "Use install disc to repair." HD2 is isolated from Internet since birth. HD 10.6.8, but HD2 is still 10.6.3. Can I use the original 10.6.3 install disc to start, and then go to the side needing repair, without a problem?
Part 2: After 4 years, suddenly when HD2 is revived from sleep, it makes an Internet connection, all settings are the same, Network shows Ethernet is unplugged, but the indicator from modem shows connection. Maybe connected to first part of my question, but maybe not.
Thank you.

Graham Giles wrote:
Have you seen this type of problem before? I think it could be a serious issue for anyone in a similar position.
No; but then, I've not had occasion to use TDM. I've been using firerwire drives for over 10 years, both FW400 and FW800, with no issues except a bit of instability using a B&W G3 machine.
TDM should be safe. Using cautious, manual copying of files from the Target machine to the Host machine should not result in unexpected loss of files or damage to the Target drive's directories. It should behave exactly the same as if it were an external (to the Host) firewire drive.
• I don't suppose there is anything I can do to 'put back' lost items from a separate Time Machine drive which has an up to date backup on it.
There is probably a way to do that - seems to me that's one of the reasons for a Time Machine volume.
On the other hand, if the Time Machine volume is rigidly linked to the now-absent OS on the original drive, there may be no way to effectively access the files in the TM archive.
I know that using a cloned drive would work well in this instance.
I have no experience with Time Machine, so perhaps someone who has will chime in with suggestions.
With the machine in TDM with the other machine, have you tried running Disk Utility to see if you can effect repairs to the drive?

Drivers/Utilities CD..XP and VISTA..can I use vista for WIN7 64 bit install?

Drivers/Utilities CD's, that came with the p-35 Motherboard..XP and VISTA..can I use Vista for WIN7 64 bit install, or download the chip set drivers for Awin7 BEFORE the OS install??
MSI P-35 Platinum
Q6600 Core 2 Quad
Presently XP 32Bit
NVidia geforce 8600GT
8GB DDR2 SDRAM PC6400-800MHz
Windows 7..waiting to be installed.
Hello,
I WANT TO DO A CLEAN INSTALL.I have Windows 32 Home XP, I have the Win7 OEM I want to install.
When i bought my MSI mobo, it came with both the drivers and utilities for XP and Vista. Can I use the chip set drivers and utilities for Vista, until i can go to MSI and download the latest chip set drivers? When do i install these drivers....before the OS install, or after?
Can I format these drives first, go in the BIOS change to boot sequence from Raptor Boot Drive to the DVD/Rom to boot the WIN7 from, or should I format while installing Win7?
Someone on another forum suggested that 1) disconnect the two droves, then install the OS on the boot drive, and2) before win7 install, make the proposed boot drive (NOT THE DVD/CD ROM the first choice priority for the boot sequence....is this right?
Is it absolutely necessary to unplug the other two drives, while formatting and installing the WIN7 O.S.? People tell me that there is a chance of the OS installing sometimes on the other drives.
Also, if I want to change the now present boot drive Local disk letter (C) to my storage drive (G) and the other two drive letters, can I do this in manage disks, anytime, or only during windows setup install?
Thx

I've never had this much trouble hooking up a HDD.
I have two IDE DVD/CD ROMS. (My RAID MODE was IDE in XP OS, and still is with WIN7.)
I have three SATA HDD's.
After unplugging the SATA 2TB HDD while I installed the WIN7 OS on the 500 GB HDD (it was on the 74 RAPTOR, but I moved location, and made absolutly sure nothing went on my raptor)
So today I decided to re-hook up the 2TB Storage HDD, and when I did, I went into bios,and to the cell menu, and LOAD ALL DEFAULT SETTINGS, so it could see my newly installed HDD,which I had all my backup Data from the previous HDD. I also checked and the RAID MODE was IDE, and the boot sequence was the WDC 500GB Boot/OS drive, rebooted,then I got that annoying blanked out screen with that blinking cursor, so I got back into the bios,and changed the 1st boot to the IDE Pioneer DVD/CD ROM, 2nd boot to the 500GB HDD, and rebooted again..still got that blinking cursor.
I opened up the Mobo, checked and replugged all SATA, and power cables to the three HDDS, tried it again,then still got the blinking cursor. Seems no matter what I change in the boot sequence,it never wants to boot properly
....AND THEN,
I started with TAB > POST> started WINDOWS, then once it opened up, I went to manage Disks, saw all three HDDs were online and healthy. Win. Explorer also listed them in that folder, in device manager, it listed all three too.
The managed window showed this:
74GB (system,active,Primary partition) Storage
2TB (Primary partition) Excessive Storage
500GB (Boot, page files,crash-Dump, Primary partition) Operating system
Both the PCI IDE BusMaster and ON-Chip SATA Controller were both ENABLED.
Before I just got online, I tried RESTART, and it opened Windows the usual way, so I hope I don't have any more problems. It worked fine BEFORE I just plugged in the 2TB HDD back in.
I pretty much did what everyone suggested,except for leaving in the 74GB Raptor when I installed WIN7, which prompted me to format the drive prior to installing the OS. Also, when I changed the IDE, RAID,and AHC1, to the AHC1 Mode, just before I installed Window7, like a few suggested, I also had problems, so after the install, I went back and changed it back to IDE. My Floppy was an IDE, but I removed it from my system, and disabled in BIOS, but even a few times I went into Bios and saw that thje floppy was 1st Boot, even though I changed to either the DVD/CD Rom, or the 500GB boot drive.
So what is the preferred boot sequence?

Which unity accts can I take off "domain admin" group after install

Hi
Unity 5.X in UM mode - Which unity accts can I take off "domain admin" group after install (ie unityinstall, unityadmin, UnityMsgStoreSvc, UnityDirSVC etc..)
and if I do so, what is the impact or if I want to upgrade in the future?
Thanks

UnityInstall should be the most powerful account and is the only account that should be added to the Domain Admins group by the Permissions Wizard. This is definitely true for Exchange 200, 2003, and 2007. I've not dealt with a lot of customers on 2010 yet so this could have changed; however, I doubt it. You can verify what I'm telling you here:
http://www.ciscounitytools.com/Applications/Unity/PermissionsWizard/Unity403_411/Help/PWHelpPermissionsSet_ENU.htm
This link will tell you what permissions and group memberships are set at a high level for all the Unity service accounts.
To clarify what Jonathan said, by "downgrade" the UnityInstall account - the rule of thumb is this:
Cisco supports that you DISABLE the UnityInstall account, if desired, after an installation. This account should only be used during installation activities. However, DO NOT DELETE the account in AD. So, again - disabling the account is OK.
Hailey
Please rate helpful posts!

Missing "Planning" option in configuration utility after installing BPMA

Hello,
I am unable to find "planning" option in configuration utility after installing BPMA.
But the planning applications are working normally.
Has anyone faced this issue before?
Can anyone please tell me how to bring the back in configuration utility?
Thanks
Hemanth

Hello Azmat,
You are right I did the same.
It was a big mess when I did that. I had to reapply patches and re-set DIM settings.
I saw this posting by John in the forms.
Planning Option Not Visible in Configuration Utility
Wondering if this is the solution.But I found this post after re-installing planning in Dev and QA.
I am yet to install EPMA in prod. I want to see if I can install it without disturbing other environments.
Thanks
Hemanth

Can I use an OSX 10.6.3 install disk to upgrade from OSX 10.5.8

Can I use an OSX 10.6.3 install disk to upgrade from OSX 10.5.8

Yes. And, see below:
Upgrade Paths to Snow Leopard, Lion, and/or Mountain Lion
You can upgrade to Mountain Lion from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99. To access the App Store you must have Snow Leopard 10.6.6 or later installed.
Upgrading to Snow Leopard
You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard — Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
     Snow Leopard General Requirements
       1. Mac computer with an Intel processor
       2. 1GB of memory
       3. 5GB of available disk space
       4. DVD drive for installation
       5. Some features require a compatible Internet service provider;
           fees may apply.
       6. Some features require Apple’s iCloud services; fees and
           terms apply.
Upgrading to Lion
If your computer does not meet the requirements to install Mountain Lion, it may still meet the requirements to install Lion.
You can purchase Lion by contacting Customer Service: Contacting Apple for support and service — this includes international calling numbers. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
     Lion System Requirements
       1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
           or Xeon processor
       2. 2GB of memory
       3. OS X v10.6.6 or later (v10.6.8 recommended)
       4. 7GB of available space
       5. Some features require an Apple ID; terms apply.
Upgrading to Mountain Lion
To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
     OS X Mountain Lion — System Requirements
       Macs that can be upgraded to OS X Mountain Lion
         1. iMac (Mid 2007 or newer) — Model Identifier 7,1 or later
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) —
             Model Identifier 5,1 or later
         3. MacBook Pro (Mid/Late 2007 or newer) — Model Identifier 3,1 or later
         4. MacBook Air (Late 2008 or newer) — Model Identifier 2,1 or later
         5. Mac mini (Early 2009 or newer) — Model Identifier 3,1 or later
         6. Mac Pro (Early 2008 or newer) — Model Identifier 3,1 or later
         7. Xserve (Early 2009) — Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
Are my applications compatible?
         See App Compatibility Table — RoaringApps.
     For a complete How-To introduction from Apple see Upgrade to OS X Mountain Lion.

Can i use a 2nd iphone if i install itunes on another user account.when i tried to create a second library i messed up both phones, the second one now has all my contacts and when it sends txts it either says its my other phone or email address

can i use a 2nd iphone if i install itunes on another user account.when i tried to create a second library i messed up both phones, the second one now has all my contacts and when it sends txts it either says its my other phone or email address. i can cope with the first phone and getting it back on itunes but dont want to syn the 2nd phone until i know it is independant of the other one. Does it matter that both phones use the same itunes store account?

Deleting the account on your phone only removes if from your phone. The account and it's data remain intact and doing so will not effect your daughter's phone.
To do this, first go to Settings>iCloud on your phone and turn any synced data (contacts, calendars, etc.) to Off, and when prompted, choose to keep the data on the phone. When finished, scroll to the bottom and tap Delete Account. Then set up a new iCloud account with a different Apple ID and turn any data you want to sync with iCloud (contact, calendars, etc.) back to On. This will upload your data to your new iCloud account.

How can I retrieve my contacts and pictures after installing iOS6 on my iphone?

How can I retrieve my contacts and pictures after installing iOS6 on my iphone? Don't call me stupid! I was relying on iCloud to have backed all this up, but turns out it didn't work. Can anyone help me get my photos back - they were of my baby daughter. Also, I've lost all my contacts. Please help.

Unfortunately no. The only way the phone backs up is if you make it back up. You either connect to iTunes and backup and sync, or you set it up for a wifi sync to iCloud. But you have to setup iCloud to start with. You have learned a hard lesson on how to make sure you import pictures on a regular basis like you would the digital camera. When things happen to the phone, this is the media that is lost the most (pictures in camera roll). After taking a number of pictures, and especially ones you consider important, you should connect the phone to the computer and import them, so there is a backup copy on the computer.
Contacts are saved in the backup as well, however they are really designed to be synced to a supported application on the computer, or backed up to iCloud or other cloud service. And, the only way to go back in time on the phone is to restore from a backup, but you also have to remember, you would lose everything on the phone that you had done since that backup, so it is a double edged sword.

Why can´t i connect to Windows servers after installing Lion?

Why can´t i connect to Windows servers after installing Lion?

Me too!
MacBook Pro 15" 2011, OS X Lion 10.7

Can I use 9i imp/exp utility after installing 10g

Similar Messages

Maybe you are looking for