Can I use a 2009 iMac as external display for 2007 macbook pro with DVI port only

I have a late 2009 imac with minidisplay port and  a 2007 macbook pro with DVI port. I connected a mini diaplay port to DVI cable but all I get on the imac is a blank screen when I press F2. Can I use the imac this way?

I'm not sure if it works with DVI but your late 2009 must be a 27". Try Command-F2 or Copmmand-Fn-F2

Similar Messages

  • Can I hook use an  older iMac as an display for my Macbook Pro?

    Can I use an older iMac as an display for my Macbook Pro?  The Macbook Pro has the Mini display port and the iMac has the older (larger) display port.  I am trying to have a document open on the iMac while writing a paper on the Macbook Pro.
    Thank you for your time.

    Welcome to Apple Support Communities
    You can use the Mid 2011 iMac as a display for your 2011 MacBook Pro. Both have Thunderbolt, so you won't have any problem > http://support.apple.com/kb/PH11302?viewlocale=en_US&locale=en_US
    Buy a Thunderbolt cable and press Command and F2 keys on the iMac to enable Target Display

  • How can I use my iMac6.1 as a display for my MacBook Pro

    I have a relatively old iMac 6.1 that I would like to use as a diplay for my MacBook Pro:  any idea of how I can do that and what connecting cables I would need?
    Thanks.
    Vittorio

    Unless the MBP has Thunderbolt you can't use the iMac as an external monitor unless you get ScreenRecycler. If the MBP does have Thunderbolt you need a Thunderbolt cable. Because Thunderbolt is so new finding a cable could be quite a challenge, you may want to contact Lacie and see if they can sell you one other than that I have no idea where to find one now. 

  • Can I use a PowerPC iMac as a monitor for my MacBook Pro?

    I have an early 2011 MacBook Pro running Mountain Lion. I need an external monitor for it and have an old iMac laying around that I'm wondering if I could use. The iMac is the first gen white square all-in-one screen one. It's a G5, 20" 1.8 GHz from 2005. PowerPC.
    Can I connect my MacBook Pro to it to use as a second monitor? Or even to mirror the display? If so, what kind of connector cables do I need to make this happen?

    You need to use a product such as ScreenRecycler over a network connection. All of these products require the capability to boot the iMac.
    (72779)

  • Can I use the iPad as an external screen for my MacBook Pro?

    Will the iPad work as an external screen? Is there any mode to make this possible?

    Check out this app  >  http://itunes.apple.com/us/app/air-display/id368158927?mt=8

  • Can I use my iMac as a 'display' for my MacBook Pro?

    Hi all, I am really hoping someone can help me here.
    I am wondering if I can use my 24" iMac as a display for my MacBook Pro (both running Snow Leopard).
    It's my father's 80th birthday party in about 24 hours time. I am doing up the music and slideshow (thanks Apple - so easy!).
    My plan was to simply take my iMac and use it. However, I managed to drop the wireless keyboard (darn those dogs) and now my keyboard won't work. I have no backup keyboards here (gave the wired one to Dad to use with his Mac mini). I live in a country area with no access to a Mac store and it will take more than 24 hours to get a new one. Went to my local 'other computer' general store last night: I really don't want to buy an ugly black keyboard..... I have just had a great idea:
    Can I network my MacBook Pro and use it as the source for the slide show and simply use the iMac as a display? I have plenty of DVI adaptors but am just not sure how I would go about the software side of things? Or should I simply buy an ugly PC keyboard (and if I do, will the WIndows button work as an Apple button???)
    Any suggestions would be really appreciated.
    Thanks!

    The imac 24 can't be used as a monitor over a DVI connection or the like, Suzanne, but you may be able to achieve what you want to using "Screen Sharing" by networking the two computers. This lets your MBP effectively control what is running on the iMac.
    See HERE for the basic setup. For information about how to access the "shareable" screen from the MBP see HERE.
    One possible problem may be actually getting this set-up on the iMac if it is not already enabled, however, unless you can borrow a keyboard from someone (your password may have to be entered to enable it). You may be able to get around this, if necessary, using the "keyboard viewer" (which you can place in the menubar using System preferences > Keyboard, if you don't already have it there).
    Cheers
    Rod

  • 27" iMac (refurb, June 2011) not working as an external display for my MacBook Pro.

    I just got a 27" iMac (refurb, June 2011) and it's not working as an external display for my MacBook Pro (not Thunderbolt).  Any idea why?  Command+F2 does nothing.  I am connecting via Belkin Minidisplay Port-to-Minidisplay Port adapter.
    Any help is appreciated...thanks!

    Currently the ThunderBolt iMacs can only be used as an external display by other ThunderBolt Macs.
    http://docs.info.apple.com/article.html?path=Thunderbolt/10.6/en/30822.html
    Apple is very clear about that.
    2009 and 2010 27" iMac with a Mini DisplayPort can be used by other Macs with a MDP-to-MDP cable.
    Stefan

  • TS1367 Is there are a way to use my imac as a display for my macbook pro? I have a thunderbolt cable but it doesnt seem to do anything

    Is there are a way to use my imac as a display for my macbook pro? I have a thunderbolt cable but it doesnt seem to do anything

    Hello eassic,
    Thanks for the question, and welcome to Apple Support Communities.
    It sounds like Target Display Mode may be what you are looking for:
    Target Display Mode lets you use a Mac as the external display for another “primary” Mac. In some cases, you can also play the sound from your primary Mac on the speakers of the external Mac. For example, a MacBook Pro could use a 27-inch iMac as the display and play its audio on the iMac as well.
    OS X Mountain Lion: Use another Mac as a display
    http://support.apple.com/kb/PH11302
    Use an iMac with Thunderbolt as a display
    If you have an iMac with Thunderbolt, any other Mac with Thunderbolt can use it as a display. The iMac will play both the video and audio from the other Mac.
    1. Connect the Thunderbolt cable to the Thunderbolt ports on each computer.
    2. Make sure both Mac computers are turned on and awake.
    3. Press Command (⌘)-F2 on the keyboard of the external display Mac.
    4. If you want the external display Mac to play audio as well as video from the primary Mac, choose Apple menu > System Preferences, click Sound, and then click Output. Select the external display Mac from the list of devices.
    Thanks,
    Matt M.

  • Dell U2412M as an external display for my MacBook Pro mid 2008, the clarity of fonts are absolutely unimpressive.  The settings do not detect the Dell U2412M (which is grayed out), are there any drivers that need to be installed ?

    Dell U2412M as an external display for my MacBook Pro mid 2008, the clarity of fonts are absolutely unimpressive.  The settings do not detect the Dell U2412M (which is grayed out), are there any drivers that need to be installed ?

    I have posted this annoying Robles to bugreport.apple.com. Hope I can get locution (although Apple normally will not respond):
    On a software name Appfresh, it alerted me to update my MBPr 15 inches running latest OSX 10.8.2, with Chinese Word List Update 1.2. When I clicked on Software Pdate, app Store return No update available.
    My system have Chinese Word List Update 1.0 installed, and on October 5, 2012, Chinese Word List Update 1.1 was released by Apple, as alerted through AppFresh. However, this update never get updated on m system. I have to manually download chinesewordlistupdate.pkg from reviews.cnet.com/macfixit and install it manually. By doing so, I have Chinese Word List Update 1.1 on my system.
    The same problem occurred again today on November 5, 2012, where Chinese Word List Update is released by Apple. again, it fail to update from Software Update menu.
    Can you please:
    1. Explain why this problem occurred. This is so annoying.
    2. Advise me how can I get this Chinese Word List Date to update to version 1.2. Can you please send me the chinesewordlistupdate.pkg for version 1,2 so that I can manually install it on my system?
    3. How can I prevent similar problem with he subsequent version?
    Why Apple don't make this update standard as other update?
    Support please. Thank for response in advance

  • Using imac as external display for my MacBook

    Can I use the new iMac as an external display for my MacBook?

    Here's the >New iMac Spec's and there is only Mini-DVI output port and "NO" input port.

  • Can I use my iMac 2009 as an external monitor for a MacBook Pro

    I will soon be getting a new MacBook Pro with Retina display. It has an HDMI port.
    My current iMac 21.5" late 2009 model seems to have a port with what looks like a little monitor symbol, next to the firewire port. And the specs say:
    Graphics and video support
    NVIDIA GeForce 9400M graphics processor with 256MB of DDR3 SDRAM shared with main memory3
    ATI Radeon HD 4670 graphics processor with 256MB of GDDR3 memory
    Built-in iSight camera
    Mini DisplayPort output port with support for DVI, VGA, and dual-link DVI (adapters sold separately).
    Support for extended desktop and video mirroring modes
    Simultaneously supports full native resolution on the built-in display and up to a 30-inch display (2560 by 1600 pixels) on an external display
    Does this mean that port is just for video output to an external monitor? Or is is possible to also do video in?
    On the one hand it feels like a waste to use a perfectly good iMac as a monitor. But the MacBook Pro actually has better specs, and so I was wondering if it is possible anyway.
    Thanks,
    doug

    Thanks for your reply. After reading the article though, I'm still not really sure what the answer is. For example, you mention something that can be done, with some hurdles to go through, for 27" iMacs. Mine is a 21.5" iMac, but seems to have the same port you mentioned in the article. Or maybe it isn't. Anyway, I'm still not sure if it is possible after reading that. Interesting information though.
    doug

  • HT3924 using 2008 imac 24" as display for 2011 macbook pro

    can i use my  2008 iMac 24" as the display for my 2011 Mac book pro

    Not really on that year, only thing that may work for you is Screen Sharing, where you run one from the other one, but not much help with what you wan't.

  • How can I use my Iphone as wireless internet receiver for my MacBook Pro?

    Can anyone tell me how to use my Iphone 4 a wireless internet receiver for my macbook pro? Thanks & greeting from the Netherlands! Matthijs

    Apple!!!! Please listen to your customers!!!!
    http://finance.yahoo.com/news/Smartphone-Fans-Want-FM-iw-1184795842.html?x=0&.v= 1
    Give us or make us pay for FM app already!!!!!
    http://www.tomsguide.com/us/Apple-iPhone-iPod-FM-Receiver,news-4855.html

  • How to lower the brightness of my iMac, when used as external display for my MacBook Pro?

    The keyboard brightness controlls of the iMac do not work. The keyboard brightness controlls of the MacBook only controll the MacBook. Same goes for the display set up of the MacBook, I can change the MacBooks brightness there but not the one of the secondary screen.
    I am working in a pretty dark room and that iMac 27 is at full bightness. Gives me a headache. Please help.
    Thanks

    Right, it shoulld work if Mid 2011 & up, might it be a bad TB cable?
    Here's how it's supposed to work...
    http://support.apple.com/kb/HT3924
    The mid 2011s & up need Thunderbolt...
    http://support.apple.com/kb/TS3775

  • Can I use a led tv as a monitor for a macbook pro?

    I mostly stream Netflix videos on my laptop and would like to watch them on a bigger screen without sacrificing the friendly interface of my MacBoob Pro. Is is possible to us a 30-40" LED tv as a monitor?  Has anybody done this successfully?  If so, are all LED tvs alike in this regard?  I don't have a large budget and may even buy used. Any insights and advice would be most welcome.  Thanks.

    Check out Apple TV.  It is a wireles interface to your TV that comes with much more capbility than just attaching it as a monitor.  It can be the best $99 investment you can make for entertainment on your TV.  It supports Netflix directly so you do not need your Mac in the loop to watch such movies.  It simply requires a standard HDMI cable, not supplied with the Apple TV unit.  Through it, with Mavericks, you can use the TV as a standard OS X monitor or for entertainment.  Also check out the Beemer software to stream videos to it from your Mac.
    http://www.apple.com/appletv/
    http://store.apple.com/us/ipod/ipod-accessories/apple-tv
    http://www.apple.com/osx/whats-new/features.html#displays

Maybe you are looking for

  • W510, newest driver released in 7 Oct is still buggy. 4.95.48

    The new SmartAudio is still weird, compared to an old version, can anyone clear my doubts? Thanks in advance. Under the Volume Mixer If Classic Mode was selected in Audio Director, it will have options to adjust volume for speaker/headphone and micro

  • Trouble exporting to quicktime

    I created a new keynote file using keynote08 trial version and tried to export in quicktime. However, new slide transitions are not exporting as shown in keynote. Is it just me only, or exclusively to trial version? Is anyone experiencing same proble

  • Custom size photos

    Help -- I saw a similar topic in IPhoto 8 forum but I am still using version 6.0. I want to resize a photo to a specific custom size. 4.5x4.5 inches. I am not sure how to do this. Tried to convert to pixels under custom constraint and that didn't see

  • Oracle 9i scheduler

    Hi Brother, I am using 9i and just install statspack to collect db stats by hourly. I have modify the spauto.sql, and then run the script under perfstat. I see the schedule job is added to oracle scheduer but it is not run. see below. The oracle job

  • Call Total Current Connections/Users in Flex

    Hello, I realize this can be answered a number of ways and i've tried searching for it. I'm trying to find out how I can tell how many users are connected to the same FMS application in a flex application: public function totalConnectedUsers():void{