Can I use a cell value to reference a table on another sheet?

I'm not sure if this is possible and I have had no luck with searches, here is what I am attempting to do...
On my first sheet I have a number of tables, each holding information on a service. Each table is named to match the service name.
On another sheet I have a list of clients that use these services, with the service name (to match the table name on the first sheet) in a cell in the client's row.
I would like to pull data from one of the cells on the Service table to include it in a concatenate formula in the clients row.
I was hoping to be able to use the value of the cell with the service name in it as part of the formula to reference the service sheet...
For example:
="something"&Services::B2::C6&"something"
Is this possible, or is there a way I can work around the auto corrections that numbers keeps applying?
Cheers

you can construct the text of a cell reference as a string by concatenating information then use the function indirect() to turn the string into a reference.
so you would do something like:
=indirect("something"&Services::B2::C6&"something")
this is assuming that "something"&Services::B2::C6&"something"  results in a string that would be a valid reference.

Similar Messages

  • Can I use suquery in Values calues

    Can i use Subquery in Values caluse.
    INsert into copy_emp
    values (select * from emp);

    Use following instead:
    insert into copy_emp select * from emp;

  • Get Current Selected Cell Value in an af:table

    Using JDeveloper 11.1.1.3.0
    I currently have a requirement where i need to call a server method and pass the value of the current selected Cell value in my af:table.
    The reason why i can't just make use of the currentSelectedRow is because i have a set of Columns (NumericValue1,NumericValue12,...NumericValue1n) and my server method can't really tell which cell i picked.
    So far, what i did is that i utilized F. Nimphius's article about using contextMenu and passing a clientAttribute.
    Re: How to pass parameter to inline popup when mouse over
    I'm hoping to do the same thing but without raising a popup on right click. So basically, i'm hoping to select an outputText in the table and this value will be stored in a pageFlowScopeBean.
    Has anybody encountered something similar?
    Thanks.

    Hi Barbara,
    You're aproach sounds intersting.
    So you mean to say, i'll create a component which has a bindings to my pageDefinition which needs to have it's clientComponent attribute set to true i believe so that my javascript can find this component.
    Then, i'll write a javascript that handles the focus event which then stores the clientAttribute value and stores that in the hidden component mentioned earlier. I'm guessing that once i set the newValue to the hidden component, it should be posted to the pageDef bindings upon hitting server side calls.
    I'll try this out and give an update on it.

  • Use of Cell Variant for a normal table

    Hi Experts,
    I have a requirement in a normal table where a row is first in read-only mode, then on click of edit button (given on that row),
    the row should become editable and also edit button should become invisible and two more buttons update/cancel have to be visible. How to achieve this using a cell variant for this normal table.
    A detailed reply would be appreciated.
    Thanks in Advance,
    Mirza Hyder.

    Hi Mirza,
    Cell variant property is used to chenge the cell property not for other.That means in one cell you want checkbox and in other cell you want textview like this you can change the property of cell as you want.
    Test this standard program WDR_TEST_TABLE in that test view cell varint for your understanding.
    Coming to your requirement.You can do in this way.
    Check in the below thread in that i gave code to make the entire row is editable when you click on the lead selection of row.I gave code for ALV.I hope that code is use ful for you.
    How to make all columns of alv editable
    To make tool bar buttons disable and enable:Write your logic in method handler of lead selection event like change the visible property of button to none.
    Note: In the event handler method you dont get reference of view.You only get reference of view in WDDOMODIFYVIEW only so take a global variable of type ref to if_wd_view and populate that global variable in method WDODIFYVIEW.So that you can access any view element in any method.
    For cell variant in ALV check this Article written by me.
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f0e7461d-5e6c-2b10-dda9-9e99df4d136d

  • Can i use create function for MSSql scalar and table valude function.

    Hi,
    1) Can i use create function for MSSql scalar and table valued function?
    2) How many type of user defined function are there in oracle 11g express?
    3) And can i reture any "type" form user defined function?
    yourse sincerely

    944768 wrote:
    Q1)That means even if i return predefined types like integer, varchar2 then also PGA is used ?The data type does not determine where the variable is stored. A string (called a varchar2 in Oracle) can be stored in stack space, heap space, on disk, in a memory mapped file, in a shared memory, in an atom table, etc.
    It is the who and what is defining and using that string, that determines where and how it is stored.
    The Oracle sever supports 2 languages in PL/SQL. The PL (Programming Logic) language is a procedural/declarative language. It is NOT SQL. SQL is integrated with it. The PL/SQL engine uses private process memory (PGA). So PL/SQL variables exist in the PGA (but there are exceptions such as LOBs).
    Q2) So please suggest me solution in oracle.Sounds to me you are looking at how to implement a T-SQL style function as an Oracle function, and once implemented, do joins on the function.
    Do not use PL/SQL in SQL in place of a SQL select. It is not T-SQL.
    One cannot use PL/SQL to create functions along the style of T-SQL, where the function executes a SQL using some conditional logic, and then return as if the function was a native SQL select.
    T-SQL is an extension to the SQL language - making it a hybrid and very impure language implementation. PL is based on ADA - part of the Pascal family of languages. The E-SQL (embedded SQL) approach used in languages like C/C++, Cobol and Ada, has been transparently done in PL/SQL. You can write and mix PL code and variables with SQL code. And the PL/SQL engine figures out how to make the call from the PL/SQL engine to the SQL engine.
    But PL/SQL is not "part" of the SQL language and does not "extend" the SQL language in a T-SQL fashion.
    So you need to check your SQL-Server preconcepts in at the door, as they are not only irrelevant in Oracle, they are WRONG in Oracle.
    The correct way in Oracle, in a nutshell - Use the SQL language to do data processing. Use PL/SQL to manage conditional process flow and the handling of errors.

  • Can i use a 2nd iphone if i install itunes on another user account.when i tried to create a second library i messed up both phones, the second one now has all my contacts and when it sends txts it either says its my other phone or email address

    can i use a 2nd iphone if i install itunes on another user account.when i tried to create a second library i messed up both phones, the second one now has all my contacts and when it sends txts it either says its my other phone or email address. i can cope with the first phone and getting it back on itunes but dont want to syn the 2nd phone until i know it is independant of the other one. Does it matter that both phones use the same itunes store account?

    Deleting the account on your phone only removes if from your phone.  The account and it's data remain intact and doing so will not effect your daughter's phone.
    To do this, first go to Settings>iCloud on your phone and turn any synced data (contacts, calendars, etc.) to Off, and when prompted, choose to keep the data on the phone.  When finished, scroll to the bottom and tap Delete Account.  Then set up a new iCloud account with a different Apple ID and turn any data you want to sync with iCloud (contact, calendars, etc.) back to On.  This will upload your data to your new iCloud account.

  • When I buy full CC can I use that both in my laptop and table iMac and iPad?

    When I buy full CC can I use that both in my laptop and table iMac and iPad? I hope that I do not need to pay for the CC in every equipment.

    You have two activations and can use it on two systems. iPad apps are separate and don't count.
    Mylenium

  • Can't call or chat with Verizon because I can't use my cell (Account, not technical problem)

    Dear all,
    So I am living in Ireland right now.  NOT using my Verizon account at all.  (Phone still active, still paying, but using a European cell here.)  In the meantime, I need to make a change to my nephew's account, which I pay for on mine.  (He got a new carrier on his own a month or so ago and I need to cancel his line.)  If I dial any of the numbers for customer service from a land line or from my cell here, it says to hang up and use my cell phone.  And I can't do that!  I don't have it activated for global services because I'm not using it.  Then on top of that, the chat online function seems to be blocked in Ireland.  It won't work on any computer I try.
    So here I am, I can't call Verizon.  I can't chat with Verizon.  I can't find an e-mail address.  And in the meantime, for the last month I am paying for a phone that isn't being used.  Because I can't figure out any way to actually get Verizon to talk to me!!  I've tried googling numbers, etc., etc.  The 1-800-922-0204 number says I'm not calling from a Verizon cell and hangs up on me.  The 908-559-4899 number behaves exactly the same.  I tried the Global services number, but they said it's for technical support only, no customer help. 
    Help????
    Thanks,
    Jill

        @JillianTH
    I'm so sorry to hear of the trouble you're experiencing with reaching one of our Customer Support representatives!  Here's a link to our Global Support Contact Us page: http://vz.to/YXAFHw.  There's instructions included for using the Global Support Calling Card on this page.  This will allow you to reach one of our Global Support Team members and they can assist you with making any changes to your account.  Have a wonderful day and stay in Ireland!
    AnthonyTa_VZW
    Follow us on Twitter @VZWSupport

  • How can I use "Make Current Values Default" Programmatically?

    When I use this method in a Invoke node, I get the error code 1000, then i can't use it in run mode?
    How can I modify the default values in a Built aplicattion, and save for the next time I load it?

    Hi,
    I've attached a small demo to show setting up the front panel control. The VI Change Control Value.vi is the one you run. Demo.vi has one control on the front panel whose value is setup by Change Control Value.vi. Just unzip the file, keeping the two VI's in the same folder. You don't need to open the Demo.vi.
    I've used this mechanism onlong with a config file when creating a Virtual Instrument Driver.
    Regards
    Ray.
    Regards
    Ray Farmer
    Attachments:
    demo.zip ‏23 KB

  • I won an ipad 2 in a contest (64gb 3g) does it have a carrier already installed or can I use my cell phone carrier (sprint)

    I won an ipod2 in a contest and have sprint for my cell phone carrier. Can I use sprint as a carrier on this ipad or does it have to be verizon or at&t?

    I'm surprised that it doesn't say on the box. Does it say either "CDMA" or "GSM"? You can also check the model number; unless the information I found is incorrect, the GSM/AT&T model is A1396 and the CDMA/Verizon model is A1397. You can also look for a SIM slot. The Version-model iPad 2 doesn't have even an empty slot, if memory serves.
    Regards.

  • Cannot replicate the ring cells' value list on a table

    Hi, 
    I am trying to create a variable-size table/matrix of ring cells. The default value list is "0 (x)" and "1(P)", for binary purpose, specified in cell (1,1). When I insert a new row and/or colum on the table, It looks like the inserted cells does not inherit the specified value list "0 (x)" and "1(P)" from cell (1,1).
    I have also tried the following options, but none of them works.
    (1) change the Table Mode (Edit Table -> Control Settings -> Table Mode) to either "row" or "column" from "grid"
    (2) use the parameter "VAL_USE_MASTER_CELL_TYPE" instead of ring type
    (3) search the forum but not clue found
    Please also see the attached snapshot files, which show how the settings are set.
    (1) "snapshots_02_ring_list.jgp": specify the ring value list of cell(1,1)
    (2) "snapshots_03_edit_default_cell_values.jpg": I tried also to specify the default cell values in Control Settings (Edit Table -> Control Settings -> Edit Default Cell Values -> Ring/Combo Box Attributes), but the button "Value List" is greyed out.
    (3) "snapshot_04_cells.jpg": the created/inserted cells do not have the value lists
    Here is the code piece for your information:
    // insert a few rows
    InsertTableRows(panel,PANEL_TABLE_CHKBRD, (iNumOfRowNow+1),iNumOfRowChange, VAL_USE_MASTER_CELL_TYPE);
    // draw the cells
    ProcessDrawEvents();
    // set the active row
    SetCtrlAttribute(panel, PANEL_TABLE_CHKBRD,ATTR_FIRST_VISIBLE_ROW, iNumOfRowNew);
    Thanks.
    Attachments:
    snapshot_02_ring_list.jpg ‏134 KB
    snapshot_03_edit_default_cell_values.jpg ‏159 KB
    snapshot_04_cells.jpg ‏16 KB

    You cannot inherit the ring values of a cell. This is why the Value List button is dimmed when you edit the default cell values of a column in the UI Editor.
    You can use the InsertTableCellRingItem function to programmatically create the value list of any new cells that you add to the table. Or the InsertTableCellRangeRingItem function, if you want to do the same thing for multiple cells at once.
    By the way, for items that can be inherited (i.e. cell attributes, as Wolfgang put it), inheritance does not happen from one cell to another. Depending on the table mode, inheritance happens from a column's default cell to new cells under that column, or from a row's default cell to new cells on that row, or from the table's default cell to all new cells.
    Luis

  • What is the use of initial value in a database table?

    Hi can anyone help me in knowing what is the use of initial value which is present besides primary key while creating a table?

    Initial Value:
    Indicator that NOT NULL is forced for this field
    Use
    Select this flag if a field to be inserted in the database is to be filled with initial values. The initial value used depends on the data type of the field.
    Please note that fields in the database for which the this flag is not set can also be filled with initial values.
    When you create a table, all fields of the table can be defined as NOT NULL and filled with an initial value. The same applies when converting the table. Only when new fields are added or inserted, are these filled with initial values. An exception is key fields. These are always filled automatically with initial values.
    Restrictions and notes:
    The initial value cannot be set for fields of data types LCHR, LRAW, and RAW. If the field length is greater than 32, the initial flag cannot be set for fields of data type NUMC.
    If a new field is inserted in the table and the initial flag is set, the complete table is scanned on activation and an UPDATE is made to the new field. This can be very time-consuming.
    If the initial flag is set for an included structure, this means that the attributes from the structure are transferred. That is, exactly those fields which are marked as initial in the definition have this attribute in the table as well.
    hope it helps,
    Saipriya

  • Use of initial values check box in tables

    Hi,
    what is of use of initial values check box(after the primary key check box)  in tables.
    Regards,
    Suresh

    The flag indicates whether field inserted in the database is to be filled with initial values. The initial value used depends on the data type of the field. I.e. type n(2) is '00'.
    When you create a table, all fields of the table can be defined as NOT NULL and filled with an initial value. The same applies when converting the table. Only when new fields are added or inserted, are these filled with initial values. An exception is key fields. These are always filled automatically with initial values.

  • Can i use one router connected to my cable modem and another....

    can i use one router to connect to my cable modem them have another (not connected to a modem) and a wireless reciver so i can plug my xbox 360 into it?

     Yes you can do that ... but you need to configure the computer connect to the Router using Cable ....
    Afterwards ... you can work on mutiple computers ...

  • Can I use gpt to recreate/unerase a partition table? (Rebuild the GPT/GUID partition table?)  I don't want to do FILE recovery.

    (Yes, I've  googled a bunch and read threads like this one already.)
    Can I use gpt or some other app to recreate/unerase a partition table?  That is, how can I rebuild a disk's GPT/GUID partition table?)  I don't want to do FILE recovery.
    What happened: Instead of erasing a single partition off a disk with many partitions, the entire partition table was erased (using Disk Utility, w/o deleting the underlying files).  Somehow the "Erasing a disk deletes all data on all its partitions." warning message was missed.
    I have a copy of the output of df, with the number of blocks in each partition, from just prior to the erasure, so I should be able to recreate the GPT/GUID partition table.  Editing the GPT with a hex editor is not feasible.  Simply recreating the partitions with Disk Utility will overwrite the key filesystem tables on each partition, and I don't want to do that, plus Disk Utility doesn't allow me to specify exact partition sizes anyway.
    Surely there's an app for rebuilding the partition table (other than emacs' hexl-mode!) for recreating/unerasing a partition table when the partition sizes and orders are known?  I've looked at the advertising for a bunch of recovery software and none of them clearly indicate that they will do what I want. 
    I guess I can try using gpt on a copy of the reformatted drive I've made with dd, and see what happens.  But perhaps someone knows of a tool that should do what I need, or knows if gpt is that tool or not.
    There are answers and tools that will do FILE recovery - search for files and recover the ones that aren't fragmented or deleted.  As far as I can find, they just look for files on the disk, and don't pay much, if any attention to the filesystem info or directory heirarchy, which in this case is valuable.  Of course I could send it in to DriveSavers, or the like.  But none of that seems necessary, and the scavenging file recovery apps won't do the job well,
    E.g. some are mentioned here:
    I don't want to do FILE recovery.
    Thanks for any help.
    The links in this post are to pages describing the underlined term, e.g. the man pages for df and gpt.
    dd output includes:
    Filesystem
    512-blocks 
    Used Available Capacity  Mounted on

    Aperture has the ability to work with files in their existing location. They are called "referenced masters." When you import images, you should select the "In their current location" in the "Store Files:" drop down box. Have a read of the documentation for full specifics. Unsure how you can resolve your duplication; might be some work but next time have a read of the manual first
    Information for versions is stored in the Aperture database (library file). The masters can be inside the library file itself, or they can be somewhere else.

Maybe you are looking for

  • Item not relevant for Billing in STO case

    Hi, I have created the invoice from NL Delivery type but then i cancel the same invoice. Now i am going to create again the invoice ,it is saying item is not relevant for invoice. i have check everything and it is fine as Billing Relevance is "J' in

  • Issue with Jdeveloper 11g R1

    Hi All, I am using Jdeveloper 11.1.1.6.0 version installed in Windows 7. The problem i am facing is - any changes made in my application is not reflecting. I am able to generate the EAR file successfully and able to deploy to the weblogic server succ

  • Clementine 100 percent CPU use after quit

    after i quit clementine, pause it or stop playback get 100 percent cpu.  any ideas ? when i start clementine from console this is what i get, the second part is after i hit the pause button Couldn't load icon "clementine-panel" Couldn't load icon "cl

  • VA01 copies texts, but VA02 does not when creating from reference

    Hello, I am having an issue with text determination configuration.  It is currently set up to copy some header texts from the quote to the order when an order is created from reference.  This works correctly when using transaction VA01 to create an o

  • Introducin​g Digital Library!

    We're happy to introduce the new Digital Library at BestBuy.com. With Digital Library you'll get:  • A faster and more reliable downloading experience • Better access to your downloadable digital collection Digital Library is replacing Best Buy® pc a