Can I use a midi/usb cable to connect to garage band?

Can I use a midi/usb cable to connect to garage band? Or do I need to buy an interface such as M-Audio. I have the M-TRACK, but haven't connected it yet.

karbuckle10 wrote:
Do I need two cables back and forth between the M-TRACK or just one OUT from the piano and IN from the M-TRACK?
i must confess i haven't checked GBv10, but all previous versions (and i'm guessing GBv10 as well) have only supported MIDI-IN, so all you need is to run the keyboard's OUT to the interface's IN

Similar Messages

  • Can I use iphone 4s USB cable to recharge for the new ipad

    Can I use iphone 4s USB cable to recharge for the new ipad

    The iPod, iPad & iPhone cables are identical, however, the chargers are not.
    The quickest way (and really the only way) to charge your iPad is with the included 10W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
    Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
    How to Calibrate Your Mac, iPhone, or iPad Battery
    http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
    At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
    Also, if you have a 3rd generation iPad, look at
    Apple: iPad Battery Nothing to Get Charged Up About
    http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
    Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
    http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
    New iPad Takes Much Longer to Charge Than iPad 2
    http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
    Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
    Extend iPad Battery Life (Look at pjl123 comment)
    https://discussions.apple.com/thread/3921324?tstart=30
    New iPad Slow to Recharge, Barely Charges During Use
    http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
    Tips About Charging for New iPad 3
    http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
    Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
    http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
     Cheers, Tom

  • Can I use the same USB cable for both the iPhone and the iPad?

    Brnad new user of the iPad - can I use the same USB cable for both the iPhone and the iPad?  The iPad does not charge when plugged into the computer or the wall (110V) adapter.  I've been able to sync in iTunes using the same cable on both.

    Actually, the iPad charger works just fine with iPhones and iPods.  The iPod/iPhone charger will charge an iPad very slowly but no harm will be done.

  • After I went to iOS 7.0.3 can't use hotspot with usb cable

    Hello All
    After upgrading to iOS 7 on my iphone 4 I can no longer use my personal hotspot with a usb cable (wifi connection works)
    When I go to system preferences>Network>Ethernet (Macbook Pro ...0S 10.6.8 )
    It says "cable unplugged " but it is plugged because I can charge and transfer data using this cable
    Here is what I've tried so far on my Macbook Pro with OSX 10.6.8 and my iphone 4
    Tried a  different cable  ..... did not work
    Made ethernet setting inactive and active again .. did not work
    Deleted Ethernet setup and  and created it again .. did not work
    Reset the iphone network settings twice did not work
    So what now ?
    I don't like the iOS 7 its slower and I am having another problem too
    Thanks All

    I am having the same problem. I have a normal iphone4 and when I upgraded to ios7, suddenly no one can hear me on calls. It works with speakerphone and on a headset, and I can play music normally. It has to be software, or else why would speakerphone work? My phone also functioned just fine before this upgrade and now my phone is useless as a phone.

  • Can i use an extented usb cable to recharge my ipad ?

    Hello !
    I just bought iPads for my business. I want to use it with stands and i'm looking for a way to recharge it. I bought a 5m extended usb cable, plugged it and the ipad made a sound like if it was recharging but then, it says, "not charging" !
    How can i charge it ? Any ideas ? It seems that this 5m cable is useless...
    Thank you !

    Ok, i see...
    But the thing is that i'm going to use it on a stand. The Apple charger doesn't go inside the tube of the stand so i need an usb extension...
    I tried with my phone (Nexus 4), it worked !
    Here is a plan as yours of what i need :
    iPad-----Lightning/USB inside the tube------------Extended USB cable----------Apple charger-------(eventually a classic electrical cord extension if i need it longer)---------Wall.

  • Can I use a SH68-68EPM cable to connect a PXI-6704 with a BNC-2090?

    Hi,
    I was wondering if I could use a SH68-68-EPM cable to connect a PXI-6704 (sitting in a PXI-1002 Chassis and talking to my (Windows 7) PC via a PCI-8331) with a BNC-2090-box.The manual suggests to use a D1-cable but maybe it is possible to still get the analog outputs from the BNC-box although the cable is different?
    Thanks for your help!

    Hi cars10,
    The BNC-2090 is not compatible with the NI 6704 due to pin mapping.  You can use BNC connections via the CA-1000 or use a card from the analog output series family with the BNC-2090A or BNC-2110 as described in the user manual. 
    Regards,
    h_baker
    National Instruments
    Applications Engineer
    Digital Multimeter Resources

  • Can you use an mbox mini as an interface with Garage Band ipad? How?

    I would like to use external d/a interfaces as an input to garage band on an ipad, but don't know how to connect them and set this up in Garage Band.
    I have access to an mbox mini and a MOTU 828 mkii.  Any help on this?

    Thanks for the response!  ...I may be trying it soon

  • Can I use thunderbolt as a cable to connect my computers screen to my tv?

    Just wondering since I'm having a lot of trouble with my mini display port to hdmi cable...

    Unfortunately, it's not possible. However, if your TV has got other ports different to HDMI (like DVI, VGA...), you can buy an adapter to connect the Mac with the TV. Or you can buy an Apple TV and stream the Mac onto the Apple TV with AirPlay Mirroring > http://support.apple.com/kb/HT5404

  • How can I use my Dx7 as a MIDI controller for Logic Pro  9? I'm using MIDI/USB cable but Dx7 doesn't appear in the 'set-up' list, what am I doing wrong?

    I'm using Logic Pro 9 -  9.1.8
    MacBook Pro Retina OSX 10.9.3
    DX7 2 FD connected to my laptop with a MIDI/USB cable
    When I click the 'scan all models' search in the 'Control Surfaces Set Up' there is no Yamaha DX7 in the list so how can I make Logic 'see' the DX7?

    As Colin pointed out, you have to look first in the Audio MIDI Setup. If your MIDI Device doesn't show up there, then Logic cannot see it either (unless you are using Logic Remote on your iPad to play over Wi-Fi).
    I'm curious about the "MIDI/USB cable you mention. If the DX7 has a standard 5-pin DIN MIDI out jack, then you have to connect that to a MIDI Interface first that converts the MIDI signal to send it over the USB jack out. Please note that you would see the MIDI Interface in the Audio MIDI Setup  app and not the DX7 itself. Also, in Logic you would see the MIDI Interface in the Environment as a valid MIDI input device.
    Hope that helps
    Edgar Rothermich
    http://DingDingMusic.com/Manuals/
    'I may receive some form of compensation, financial or otherwise, from my recommendation or link.'

  • Can i use The iPod shuffle cable (3rd and 4th generation) comes with a 45 mm USB cable for syncing and charging. with 2nd generation ipod?

    can i use The iPod shuffle cable (3rd and 4th generation) comes with a 45 mm USB cable for syncing and charging. with 2nd generation ipod?

    thanks

  • TS3581 CAN YOU CONNECT A SHUFFLE (gen4) TO A KENWOOD CAR STEREO USING THE SHUFFLE USB CABLE ?

    HELLO TO ALL
    ABIGMAC1 HERE! GOOD DAY TO ALL
    JUST WONDERING IF ANYONE COULD ANSWER THIS
    CAN YOU CONNECT A SHUFFLE (gen4) TO A KENWOOD CAR STEREO USING THE SHUFFLE USB CABLE ?
    I CAN USE AN AUX  3.5 TO 3.5 BUT NO WAY TO READ THE LIBRARY. PLEASE HELP ME!
    THANK-YOU
    ABIGMAC1

    Check the documentation for the car audio system for device compatibility.  A shuffle may not be compatible.
    If the car audio system is able to use a regular USB flash drive connected to the USB port, you should just get an 8GB USB flash drive for $5-10, load it with your "car songs" and leave it connected to the car audio system, instead of constantly connecting and disconnecting an iPod.
    If the car audio system has an aux. audio input mini-stereo jack, you can get something like this
    http://www.amazon.com/Monster-iCable-Player-Auxiliary-Input/dp/B002AR5XIK
    and connect your shuffle's headphones jack to the car audio system.  You can then use your shuffle to play through the car audio system.

  • Can you use the same charging cable for both an iPhone and an IPad or are they different?  When I use the charging cable for my iPhone on my Ipad, it doesn't charge.

    Can you use the same charging cable for both an iPhone and an IPad or are they different?  When I use the charging cable for my iPhone on my Ipad, it doesn't charge.

    The quickest way (and really the only way) to charge your iPad is with the included 10W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
    Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
    How to Calibrate Your Mac, iPhone, or iPad Battery
    http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
    At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
    Also, if you have a 3rd generation iPad, look at
    Apple: iPad Battery Nothing to Get Charged Up About
    http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
    Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
    http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
    New iPad Takes Much Longer to Charge Than iPad 2
    http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
    Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
    Extend iPad Battery Life (Look at pjl123 comment)
    https://discussions.apple.com/thread/3921324?tstart=30
    New iPad Slow to Recharge, Barely Charges During Use
    http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
    Tips About Charging for New iPad 3
    http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
    Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
    http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
     Cheers, Tom

  • Can I use the iPod Nano cable and AC power supply with the iPhone?

    Just purchased my iPhone 3G. Phone was in my pocket and the AT&T clerk neglected to put the box with the computer cable in the bag with the other accessories.
    Until I can pick it up, can I use my iPod Nano cable? The plug seems the same size but I don't want to break anything.
    Also, there was no power supply in the box due to the recall. Can I use the iPod AC power supply I bought for the iPod? It is the white brick about 3" by 3" by 1" with a USB socket in the side.
    Thank you for helping me with my start-up glitches.

    Ps. When you do get the accessories, look for a green dot (on the side where the prongs of the plug come out). If there, fine; if not, your adapter is subject to the recently announced recall of ultracompact USB adapters.

  • Can I use an external usb super drive on my iMac 10.6.8 ?

    Can I use an external USB SuperDrive on my 10.6.8 iMac the internal drive is not working at all? Thank you.

    DrGerega wrote:
    Can I use an external USB SuperDrive on my 10.6.8 iMac the internal drive is not working at all? Thank you.
    The answer is no unless you are willing to modify a system file.  See this article.  Read the entire thing and the comments before deciding if it is the route for you.
    If it were me I'd go with Shootist's advice and get another brand--for the reasons he stated.
    I have a SuperDrive that I use with my 2012 MBA but with my late-2012 27" iMac, which does not have an internal CD/DVD drive and therefore will work with the SuperDrive, I use a 3rd party that is both faster and cheaper than the SuperDrive.

  • Hello. My Apple TV is flashing quikcly and I dont have a micro-USB cable to connect it to iTunes. What can I do?

    Hello. My Apple TV is flashing quikcly and I don't have a micro-USB cable to connect it to iTunes and restore it. What can I do? Thank you.

    Buy the cable, or take it to Apple.

Maybe you are looking for

  • Aggregation rule ignored for Logical sources

    Hi, We are using materialized views as logical sources for our logical tables. These logical sources contain aggregated data at higher level for dimensions. However, we have a logical source at the most detailed level for the dimensions. Problem: We

  • Error in Transfer Process (Urgent )

    Hi, I am working with a classic scenario and the problem is that after the Shopping cart is approved,the follow-on document is not getting created. In the Follow on doc tab I get the status as "Shopping Cart Approved" When I check the SC in t-code BB

  • How do I get rid of or reorganize duplicate nested bookmarks? I have multiple bookmark toolbars and bookmark menus!

    In addition to the normal Bookmarks Menu and Bookmarks Toolbar, my Bookmarks Menu has its own Bookmarks Toolbar. I also have 3 nested bookmarks with the name "(No Title). One contains a Bookmarks Menu, one contains a Bookmarks Toolbar and the third c

  • About WLC 5508 version 6.0 upgrade to 7.0 issue

    hi guys, I have tow WLC , version is 6.0 One of the WLC successful upgrade and after rebooting the normal the another WLC successful too , but after rebooting the system version or 6.0 Thanks in advance

  • Is this achievable, with current technology?

    I have an idea for a layout, but was wondering if it was technically achievable. Easy part : - Centered fixed-width design (let's say 770px wide, 100% high). - Left side (335px) is empty. Right side (335px) is a text column. - Normal browser vertical