Can i use a thunderbolt display for my macbook pro and hp laptop with windows 7 and what adapters will i need

Can i use a thunderbolt display for my macbook pro and hp laptop with windows 7 and what adapters will i need

Hi jayhrab,
Currently, the system requirements listed for an Apple Thunderbolt Display are:
Thunderbolt-enabled Mac computer, including MacBook Air, MacBook Pro, Mac mini, and iMac
OS X v10.6.8 or later
Apple - Thunderbolt Display - Read the tech specs.
Regards,
- Brenden

Similar Messages

  • How to lower the brightness of my iMac, when used as external display for my MacBook Pro?

    The keyboard brightness controlls of the iMac do not work. The keyboard brightness controlls of the MacBook only controll the MacBook. Same goes for the display set up of the MacBook, I can change the MacBooks brightness there but not the one of the secondary screen.
    I am working in a pretty dark room and that iMac 27 is at full bightness. Gives me a headache. Please help.
    Thanks

    Right, it shoulld work if Mid 2011 & up, might it be a bad TB cable?
    Here's how it's supposed to work...
    http://support.apple.com/kb/HT3924
    The mid 2011s & up need Thunderbolt...
    http://support.apple.com/kb/TS3775

  • I want to remove the monitor from my 17" Macbook Pro 2008 to use as an external for my Macbook Pro 15" 2012. How can I convert lvds to Thunderbolt and power the monitor?

    I want to remove the monitor from my 17" Macbook Pro 2008 to use as an external for my Macbook Pro 15" 2012. How can I convert lvds to Thunderbolt and power the monitor?

    It's almost impossible.  The new iMacs have a Target Display Mode, but it's built to do that.  Without ripping your screen out, finding an acceptable power supply, frame, and whatever electronics to convert a Thunderbolt signal to the screen, the cost will be much larger than buying a cheaper HiDef monitor that runs with an HDMI to Thunderbolt cable to your MacBook 15.  In fact, you can sell your 17" MBP for a lot of money, unless it's broken or something, buying you a really sweet monitor.
    By the way, I found your answer by searching this forum.  I would suggest using the search function here in the futuere.

  • How do i use my imac 21.5" 2011 as a display for my macbook pro late 2011, through thunderbolt cable ? I have tried and it doesnt seem to work, neither does target disk mode.

    How do i use my imac 21.5" 2011 as a display for my macbook pro late 2011, through thunderbolt cable ? I have tried and it doesnt seem to work, neither does target disk mode.
    Could it be a borked cable ? I just bought it new from the store today, i have updated both imac and macbook pro to latest thunderbolt firmware and updates. Both 10.7.3.
    MacBook Pro:
      Vendor Name:    Apple, Inc.
      Device Name:    MacBook Pro
      UID:    0x0001000A17016E60
      Firmware Version:    22,1
      Port:
      Status:    No devices connected
      Link Status:    7
      Port Micro Firmware Version:    FFFF.FF.FF

    You are correct, here is what Apple Says:
    http://support.apple.com/kb/TS3775
    I was able to find these instructions, however they referr to 2009-2011 27" iMacs. I think it's the same, if it's not then contact Apple directly for instructions. If either of the machines is less than 90 days old or covered by AppleCare then call AppleCare tomorrow for help, they should be able to easily answer this for you. You will find the number in your manual or you can use the AppleCare Contact Info link.
    Your iMac should automatically recognize the presence of a digital video signal at the Mini DisplayPort and enter Target Display Mode.
    If your iMac does not automatically enter Target Display Mode, press command + F2 to manually enter Target Display Mode.

  • Can I hook use an  older iMac as an display for my Macbook Pro?

    Can I use an older iMac as an display for my Macbook Pro?  The Macbook Pro has the Mini display port and the iMac has the older (larger) display port.  I am trying to have a document open on the iMac while writing a paper on the Macbook Pro.
    Thank you for your time.

    Welcome to Apple Support Communities
    You can use the Mid 2011 iMac as a display for your 2011 MacBook Pro. Both have Thunderbolt, so you won't have any problem > http://support.apple.com/kb/PH11302?viewlocale=en_US&locale=en_US
    Buy a Thunderbolt cable and press Command and F2 keys on the iMac to enable Target Display

  • TS1367 Is there are a way to use my imac as a display for my macbook pro? I have a thunderbolt cable but it doesnt seem to do anything

    Is there are a way to use my imac as a display for my macbook pro? I have a thunderbolt cable but it doesnt seem to do anything

    Hello eassic,
    Thanks for the question, and welcome to Apple Support Communities.
    It sounds like Target Display Mode may be what you are looking for:
    Target Display Mode lets you use a Mac as the external display for another “primary” Mac. In some cases, you can also play the sound from your primary Mac on the speakers of the external Mac. For example, a MacBook Pro could use a 27-inch iMac as the display and play its audio on the iMac as well.
    OS X Mountain Lion: Use another Mac as a display
    http://support.apple.com/kb/PH11302
    Use an iMac with Thunderbolt as a display
    If you have an iMac with Thunderbolt, any other Mac with Thunderbolt can use it as a display. The iMac will play both the video and audio from the other Mac.
    1. Connect the Thunderbolt cable to the Thunderbolt ports on each computer.
    2. Make sure both Mac computers are turned on and awake.
    3. Press Command (⌘)-F2 on the keyboard of the external display Mac.
    4. If you want the external display Mac to play audio as well as video from the primary Mac, choose Apple menu > System Preferences, click Sound, and then click Output. Select the external display Mac from the list of devices.
    Thanks,
    Matt M.

  • Can I use my iMac as a 'display' for my MacBook Pro?

    Hi all, I am really hoping someone can help me here.
    I am wondering if I can use my 24" iMac as a display for my MacBook Pro (both running Snow Leopard).
    It's my father's 80th birthday party in about 24 hours time. I am doing up the music and slideshow (thanks Apple - so easy!).
    My plan was to simply take my iMac and use it. However, I managed to drop the wireless keyboard (darn those dogs) and now my keyboard won't work. I have no backup keyboards here (gave the wired one to Dad to use with his Mac mini). I live in a country area with no access to a Mac store and it will take more than 24 hours to get a new one. Went to my local 'other computer' general store last night: I really don't want to buy an ugly black keyboard..... I have just had a great idea:
    Can I network my MacBook Pro and use it as the source for the slide show and simply use the iMac as a display? I have plenty of DVI adaptors but am just not sure how I would go about the software side of things? Or should I simply buy an ugly PC keyboard (and if I do, will the WIndows button work as an Apple button???)
    Any suggestions would be really appreciated.
    Thanks!

    The imac 24 can't be used as a monitor over a DVI connection or the like, Suzanne, but you may be able to achieve what you want to using "Screen Sharing" by networking the two computers. This lets your MBP effectively control what is running on the iMac.
    See HERE for the basic setup. For information about how to access the "shareable" screen from the MBP see HERE.
    One possible problem may be actually getting this set-up on the iMac if it is not already enabled, however, unless you can borrow a keyboard from someone (your password may have to be entered to enable it). You may be able to get around this, if necessary, using the "keyboard viewer" (which you can place in the menubar using System preferences > Keyboard, if you don't already have it there).
    Cheers
    Rod

  • How can I use my iMac6.1 as a display for my MacBook Pro

    I have a relatively old iMac 6.1 that I would like to use as a diplay for my MacBook Pro:  any idea of how I can do that and what connecting cables I would need?
    Thanks.
    Vittorio

    Unless the MBP has Thunderbolt you can't use the iMac as an external monitor unless you get ScreenRecycler. If the MBP does have Thunderbolt you need a Thunderbolt cable. Because Thunderbolt is so new finding a cable could be quite a challenge, you may want to contact Lacie and see if they can sell you one other than that I have no idea where to find one now. 

  • Can you use 2 Thunderbolt Displays with Windows 7/Bootcamp on a Early 2011 Macbook pro?

    Can you use 2 Thunderbolt Displays with Windows 7/Bootcamp on a Early 2011 Macbook pro?
    I have 2 and cannot seem to get them to work?

    Can you use 2 Thunderbolt Displays with Windows 7/Bootcamp on a Early 2011 Macbook pro?
    I have 2 and cannot seem to get them to work?

  • Can I use my iMac (20" G5) as a display for the MacBook Pro 13"?

    Can I connect an iMac(20" G5) as a display for the MacBook Pro 13"? If yes, what adapters I need? Does it need modification or software for the iMac?

    You need to use ScreenRecycler or a VNC client.
    (49933)

  • Can I use a thunderbolt display with dvi video card?

    Can I use a thunderbolt display with dvi video card?

    Nope, you can only use it with a Thunderbolt port.

  • Can I use my thunderbolt display without charging my macbook pro?

    First off- Here's what I have-
    2012 13 inch Macbook Pro
    2.5 GHz Intel core i5
    8GB RAM
    Stock 500GB 5400rpm HDD
    Mountain Lion OSX
    Anyone know how I can use my thunderbolt without charging my Macbook Pro?
    Also, my Thunderbolt jack, port, and my overall computer get really hot when I'm using my display. Anyone else have this issue?
    Thanks!

    Ohhh I see it now.... The thing is I only have 13 cycles on my battery, but the max is only 92% percent charge... I thought that would be the charger charging my MBP and using the battery at the same time.... Another thing, would you happen to know why I have a max of 92% charge and only 13 cycles? (Two different apps are telling me the same thing...)

  • Can I use my Thunderbolt Display with my PS3?

    Hi there, I have recently purchased a Thunderbolt Display and I was wondering if I could use it with my PS3. I know I'll need a Mini DisplayPort to HDMI Adapter, but will I need anything else like a converter or can I plug it straight in?
    Thanks

    A Mini DisplayPort to HDMI Adapter can connect a HDMI display to a Thunderbolt port.  It does not work in the other direction.  If the PS3 has no Thunderbolt port, you can't use a Thunderbolt display.  There are no adapters or converters that can help.

  • HT1660 how can I use one single library for all users on the same laptop?

    how can I use one single library for all users on the same laptop?

    You are most of the way there. Each user having access to hard drive is the key. If users are limited in file privileges this is harder.
    Any files you add to your library and any files she adds to her library are available to the other. Just not automatically. Each user must add the files to their own library using the add file or add folder option from menu bar.
    What I have done is set library location to a location outside of My Documents\My Music. On my network storage I have a folder names s:\itunes. Both accounts iTunes are set to use this location for the library.

  • Is it a better decision to purchase a Thunderbolt display for my macbook air or a new imac?

    Is it a better decision to purchase a Thunderbolt display for my macbook air or a new imac? Both are around the same cost; Air-to-Thunderbolt display adds convenience of files being in one place rather than two computers.  Other cosiderations?

    You may have a problem
    http://support.apple.com/kb/TS3775
    From first glance, it appears that the cable may be the determinant factor, but the article suggests in the resolution that the device providing the video must be Thunderbolt equipped also.

Maybe you are looking for