Can I use Airport Express (1st gen.) as a wired access point to my wifi Network

Guys
I'm using 10.8.4 with the older 6.3 airport utility. I have a Airport Express A1084 (1st. Gen).
I'm trying to use it, connected to my wireless network, but have a wired ethernet cable from the Airport Express connected to a device. I tried connecting via wire to another laptop to access the web and it doesn't work.
Any ideas if I can even do this, or do I just buy a new Express Airport. I just want to extend the network using my wireless to a wired device, but don't want to run a cable, because of the distance.
Thank you
John

Bob, I hope you can help me too. I have 4th generation (? - the flat, square model that was recently replaced) Time Capsule/Airport that I bought to extend my Verizon DSL dry loop modem/wireless signal througout the house and to the guest house. I now know that it cannot be achieved due to Apple negligence in informing customers that the capsule will only extend from another apple airport product.
My question:
Should I connect it via ethernet to my DSL modem and create a new network, but use the SAME network name, passcodes, etc? Will that Strengthen my existing wireless signal or will both machines butt heads and duke it out, so to speak?
B/C, I did have two separate networks going for about a year, different names for each network, and suddenly, the wireless part of the Verizon DSL modem died, and Verizon replaced the entire modem with the Actiontec modem. So I am concerned that reconnecting the Time Capsule/Airport may damage teh Verizon modem, if that is why just the wireless part of the previous modem failed.
Suffice it to say, am very disappointed in the Time Capsule/Airport. It replaced an older, bigger Western Digital external hard drive that was so easy to use and reliable; am still using it, but it has no wireless signal boost capability, so I purchased the Time Capsule/Airport.
Thank you for your help.

Similar Messages

HT1515 How can I use Airport Express (1st generation) with OS X Mavricks?

How can I use Airport Express (1st Generation) with OS X Mavericks?

1st Generation AirPort Express will work fine with Mavericks.
Are you sure that you have a 1st Gen Express?
Check the model number on the side of the Express. 1st Gen is A1264.
If you see A1084 or A1088, these are much older versions of the Express that were sold long before Apple began to use the Generation naming with "n" wireless devices in 2007.
Mavericks will not support the A1084 or A1088. Use another Mac running Leopard, Snow Leopard, or a PC if you need to administer the older Express.

Airport Express 1st Gen dropping Time Capsule 4th Gen when being used to extend signal

I have an older Airport Express 1st Gen and recently purchased a Time Capsule 4th Gen. The firmware for both products is updated to the latest version. When I set up the Airport Express to extend the signal for the Time Capsule, it works great at first, connects and the status light turns green. But after a while, the AE drops the "extension" and the light goes amber. I have also heard this is a problem from a Macintosh expert at the Genius Bar. Has anyone solved this problem?

Try using a wireless name that is short, no spaces and pure alphanumeric on the TC.. I would even set different names for 2.4ghz and 5ghz..
So for example.. TC24ghz and TC5ghz meet our requirement.
Use WPA2 Personal security not wpa-wpa2 as that leads to issues.
Use password that is 10-20 characters pure alphanumeric.. can be mixed upper and lower case plus numerials.
Fix the wireless channel of the TC..
Now see if it makes a stable extend..
Always remember the Express must not be so far away the signal is poor.. it should get good signal itself so it can repeat to the other clients.

Currently use Airport Express -1st Generation-to access internet -purchased 2014 Airport Extreme base station -can I import Express back up configuration to keep current settings . Or is it best to do new Airport Extreme as a new Network .

Currently use Airport Express -1st Generation-to access internet -purchased 2014 Airport Extreme base station -can I import Express back up configuration to keep current settings . Or is it best to do new Airport Extreme as a new Network .

Just spoke with Cisco about the router. They said the router is compatible with the E1500. They suggested that I contact Apple to see if their default IP address was that same as the router (192.168.1.1). They told me I would have to change it if that was the case. How would I do that?

Apple TV 3rd Gen no longer sees Airport Express 1st gen in Airplay after update

Apple TV 3rd gen was connected to AirPort Express 1st gen via WiFi, drove a video device via HDMI
and sent audio to the AirPort using Airplay and selecting the AirPort Express under Speakers.
I could adjust the volume with the AppleTV remote.
Apple TV was stored unused for a while.
After powering on yesterday, I ran the update.
Now Apple TV is connected to the Airport Express via WiFi
but Airport Express doesn't show in AirPlay settings.
I can still use AirPlay from my MacBook running Snow Leopard.
There are no updates available for the AirPort

Try the following steps, check whether things are working after each step where appropriate, before trying the next.
Check AirPlay is turned on on the Apple TV (turn it off and on if it already is)
Check that both devices are on the same network (Settings > Wifi, on the mobile device and Settings > General > Network, on the Apple TV).
Restart the Apple TV (Settings > General > Restart).
Restart the Apple TV by removing ALL the cables for 30 seconds.
Restart your router. (Also try removing it’s power cord for at least 30 seconds)
Restart your mobile device.
If you are still having problems, the following article(s) may help you.
Troubleshooting AirPlay
Troubleshooting Wi-Fi networks and connections
Recommended Wi-Fi settings
Wifi Diagnostic Software (for Mac users)
You may also find some help on this page, where I’ve collected some of the more unusual solutions to network issues.
When making adjustments to your network for better optimisation, you may find some of the points mentioned on this page helpful.

I currently have a D-Link DI-604 broadband router with windows computers. How can I add wifi to the network for use with ipad? Can I use AirPort Express?

I currently have a D-Link DI-604 broadband router with windows computers. How can I add wifi to the network for use with ipad? Can I use AirPort Express?

Yes. You can directly connect an 802.11n AirPort Express Base Station (AXn) using an Ethernet cable. The AXn would then just need to be configured as a bridge to allow the D-Link to continue to provide both NAT & DHCP services for all network clients connected to either router.
In this configuration, the AXn would broadcast a wireless network for your wireless network clients to connect to.

How can I use AirPort Express when traveling?

How can I use AirPort Express when traveling?

How can I use AirPort Express when traveling?
Connect the AirPort Express to the Ethernet port in your room.....to be able to create your own private wireless network in your room for multiple devices.
You will still have to pay the hotel Internet charge for one device, if the hotel charges for Internet access.
If the hotel only provides wireless service, then a single AirPort Express will not help you.
However, if you have two AirPort Express devices, then you can use one to "join" the hotel wireless network, then connect the second Express to the first using an Ethernet cable and create your own wireless network for multiple devices in your room.

Can i use airport express with motorola SVG1202?

Hello
I have a router Motorola SVG1202 ANd an airport express.
I'd like to know if i can use both together. Airport express like an access point and motorola like a router?
Please let me know.
Thanks
Paula

In order for the AirPort Express to function as a wireless access point with the Motorola gateway, the Express would need to be connected to the Motorola device using a permanent wired Ethernet cable connection.
The Express would not be able to function as an access point if you were thinking of connecting it wirelessly with the Motorola gateway.

Can I use AirPort Express as booster/extender to LinkSys router signal?

I have LinkSys N router (which I got free, else would've bought AirPort), its signal isn't strong enough in office room. Can I use AirPort Express as a booster/extender? Some sources say Express can only talk to another Express, others say it can communicate with the LinkSys. Which is it? I don't want to spend the money for two Expresses unless I have no choice (very limited budget nowadays).
I've been hassling with this for over a month, and I'm extremely frustrated.
Thanks to anybody who can help me with this.

Most likely no. That is because most non-Apple router's implementation of WDS is not compatible ... and this is true the other way around. It is true that some early Linksys models, mainly the WRT-54 series were compatible, but I have not seen anything since then that is.

Can I use Airport express as a router or wifi modem?

I'm not good at IT. In fact, i know very little or nothing. So please, do not get annoyed at my stupid question?
The situation is this: I have a MacBook as described below, and a DSL cable connected straight from my laptop to an Ethernet port provided in my room, not through any modem. I'm living in dorm, so that's how school provides dorm students with internet connection. But sometimes, i've got to stay up late and search for information, but the connection automatically drops since it is "light out" time. Now i' considering buying an Airport Express ( or maybe Airport Extreme) to create wireless network. I really don't get how to set it up or how it's gonna work for my situation. I don't have any modem or router around. Can anyone explain the real function of Airport Express? And if possible, can you please tell me is it better for me to buy Airport Express or Airport Extreme?

True! I know that i just need to connect that cable from my laptop into the Ethernet network port. The situation is sometimes i need to stay up late to study but don't have connection past 11:30 (light out time, no more connection). And sometimes, i want to go somewhere else and use wireless network where there isn't one available. For example, my friend's house. I also want to know how the set-up of the Airport Express helps me create wireless network. Do I need a modem or a router to connect Airport express to or else? after setting up, do i need anymore DSL cable or so? Does Airport Express itself function as a wireless access point? One more question: if i set up my wireless connection in my dorm, but later i unplug the Airport Express and go somewhere to plug in, will it still work, or i have to set-up the network again?
I'm not really into network, connection, router or modem much. I don't know much about this stuff. Therefore, i have quite a lot of question. Sorry and thanks for replying me.
Another problem that arises for in your reply is that, school network is administered by staffs of IT department. If i have to to connect my wireless network to school's cabled network, i think i've got quite a lot of explaining to staffs to do. . Anyway, thanks so much for your information.
Message was edited by: haiu2323
Message was edited by: haiu2323

Can I use airport express in a wired network to play music through my stereo?

I originally used my 1st gen AE to wirelessly stream music from iTunes on my MacPro to my home theater. This works, but there are some good days and some bad days where there are dropouts in the music. I have recently run Cat6 cable to my HT from my router next to my MacPro. This feeds a Gigabit switch that feeds the ATV, receiver, bluray, HD DVD, etc. I plugged in the AE to the switch but it still defaults to the wifi network rather than taking a feed from the ethernet switch. I know i can (and do) use the ATV (gen 1) to steam music, but sometimes it more convenient to use the AE. Is there a way to force the wifi on the AE off and just have it for streaming from iTunes? Thanks.

Yes, you can configure an AirPort Express Base Station (AX) as a standalone wireless router without Internet access for the purposes of providing a Wi-Fi network for streaming. Note that any computers that will be the host of that stream would need to connect to this AX's wireless network while doing so. They would not be able to be connected to two wireless networks simultaneously for both streaming AND Internet access.

Can I use airport express to extend my network AND stream iTunes???

I have an airport extreme connected to the cable modem and sending a signal out to my home network. I also have a powerbook and an airport express connected to the home stereo.
My question is, can i use the express to extend my extreme signal (to reach the back yard) and stream music from itunes at the same time? The set up utility seems to suggest that you do one or the other.
Thanks!

Are you sure you configured the Express to extend the Extreme's network? If you use the standard setup, the two base stations will be indistinguishable, i.e. you'll only see one entry for the wireless network.
If you were connected to the Extreme when you configured the Express, try turning off Airport in the Airport menu and then turning it back on. The computer should pick up the stronger signal at that point.

Can I use airport express to create a local wireless network that my apple tv can connect to for AirPlay/mirroring in student halls/dorm without Internet connection

Hi I was wondering :
Would I be able to make a local wireless network using airport express that my apple tv can connect to which in turn is connected to a projector with hdmi in so that I can mirror/AirPlay from iPhone pad and mac

will the Airport Express allow you to log onto a hotel wireless network, and broadcast a secure wireless network in your room for your wireless devices, like the Ipad, Iphone, etc.?
The bottom line with a single AirPort Express is no.
The AirPort Express can only "extend" a wireless network when the network is being provided by another Apple router.
As you might imagine, it is extremely unlikely that that the hotel network....which no doubt uses professional wireless access points provided by a manufacturer of commercial systems.....would be compatible with an AirPort Express.
In many years of travel domestically and internationally, I cannot recall a time when a single AirPort Express would "extend" the signal provided by a hotel's wireless network.
However, if you had two AirPort Express devices handy, you might be able to configure one to "join" the hotel network and provide an Ethernet signal to the second AirPort Express, which would be configured to "create" your own "private" wireless network.

Can I use Airport Express with iPhone in my hotel room?

Is there a way to set up an Airport Express in my hotel room when I travel, so that the provided High Speed internet cable in the room can be plugged into my Airport Express, giving me a wireless internet connection for the iPhone? I use Airport Express often this way with my MacBook, so I don't have to be tethered to the cable.

I did this about a month ago when I was in England. I just had the Airport Express with me, and had not done any configurations. I plugged it in and had the iPhone find it. It worked in some hotels, and didn't at others. When it worked it was great. I assume with some of the hotels where it didn't work, that I needed to configure it but since I didn't have my laptop I didn't have any way to configure it. Is there any kind of "universal" or "automatic" configuration you can set it up with?

I have a MacPro 2008 workstation without Airport or Airport Extreme CArd isntalled. Can I use Airport Express to connect (wireless) to my wireless network? If so, can I then connect my Airport Extreme to my MAcPro by a ethernetcable ?

I have a MacPro 2008 workstation. It has no Airport/Airport card so I have to use an ethernetcable to connect to my modem. As the MAcpro
is in my office in the attic and the wireless modem is in the basement I have a problem. I wonder if it is possible to use Airport Express to connect to the wireless network? Itshould be like this: in my office I connect the MacPro with AE through an ethernet cable. If I can then get AE to connect (wireless...) to my wireless network I should be ablle to connect my MacPro to internet/wireless network. Is this possible???? Any suggestions are very much appriciated. Thank you.

Apple calls this configuration a ProxySTA.
To activate ProxySTA, you must set up the Express to join a wireless network and then enable the Allow Ethernet Clients setting; both settings are located in the Wireless tab of AirPort Utility.

Can I use Airport Express (1st gen.) as a wired access point to my wifi Network

Similar Messages

Maybe you are looking for