Can I use Airport Express's Airtunes with a non-Apple modem/router?

I am about to set up a network in our second home, so I am trying to do it as economically as possible. I will have a Verizon modem/router. The Verizon rep says the Verizon equipment is all I need for a computer network (no Airport Extreme Base Station needed). But I would also like to play music on Internet radio stations through iTunes on my Cambridge Soundworks system in a room that is different from the one where the Verizon modem/router will be. Can I purchase an Airport Express with Airtunes to plug in near the music system without also getting an Airport Extreme Base Station to which the Airport Express would be linked? If it is possible to go with just the AE, is it foolish to avoid getting the base station if I would also like to have wireless printing on my network? (I believe I would need the Airport Extreme Base Station for printing because it has the USB port.)

The Airport Express will do what you want in addition to printing if your printer is compatible as it does have a USB port. Just configure the Express to "join" the wireless network that the Verizon router is creating.
You will be able to stream AirTunes to the AirPort Express, which in turn will furnish an audio signal to your stereo system.
If you want to be able to stream any audio source from your computer to the AirPort Express...not just iTunes audio sources...you might want to take a look at Airfoil.

Similar Messages

Can I Use Airport Express for Airplay and a non-apple router with streaming capabilities on the same network?

I want to do the following things but can't find one device that fits all purpose.
Wi-Fi router that has USB port to share external hard disk wirelessly to all devices (Mac, Samsung Smart TV, PC, Ipad, Iphone) along with inbuilt torrent download capability that also has a 3.5mm jack to do airplay.
Greedy? Yes I know but why can't we have it all I ask.
Airport Express severs Wifi Router + Airplay purpose
Then there are other non-apple routers in market that satisfy my need to attach external hard disk and stream to the devices mentioned (Note: Timecapsule will not stream to my Smart TV)
So I am thinking why not connect both Airport Express and a second non-apple router and get best of both worlds.
Is it possible?
Thanks in advance.

I want to do the following things but can't find one device that fits all purpose.
Wi-Fi router that has USB port to share external hard disk wirelessly to all devices (Mac, Samsung Smart TV, PC, Ipad, Iphone) along with inbuilt torrent download capability that also has a 3.5mm jack to do airplay.
Greedy? Yes I know but why can't we have it all I ask.
Airport Express severs Wifi Router + Airplay purpose
Then there are other non-apple routers in market that satisfy my need to attach external hard disk and stream to the devices mentioned (Note: Timecapsule will not stream to my Smart TV)
So I am thinking why not connect both Airport Express and a second non-apple router and get best of both worlds.
Is it possible?
Thanks in advance.

HT1515 How can I use Airport Express (1st generation) with OS X Mavricks?

How can I use Airport Express (1st Generation) with OS X Mavericks?

1st Generation AirPort Express will work fine with Mavericks.
Are you sure that you have a 1st Gen Express?
Check the model number on the side of the Express. 1st Gen is A1264.
If you see A1084 or A1088, these are much older versions of the Express that were sold long before Apple began to use the Generation naming with "n" wireless devices in 2007.
Mavericks will not support the A1084 or A1088. Use another Mac running Leopard, Snow Leopard, or a PC if you need to administer the older Express.

Using Airport Express for iTunes on a non-Apple router

In the past, we used a Microsoft wireless router, and all of the Airport Express stations worked great (we have 3). You can start up iTunes, and iTunes showed all three Airport stations in the popup at the bottom, allowing us to pipe our iTunes music to anywhere in the house.
The Microsoft router starting going bad (2 years old), and so we replaced it with a Linksys wireless router (the one that also supports a USB printer). The Linksys is working fine for printing on that USB printer from any computer in our LAN, and it provides all the LAN computers with internet connectivity; however, the Airport Express stations are flakey at best.
At first they didn't even work (aka, didn't show up in iTunes anymore). I ran Airport Admin and connected each one of them to the iMac directly to configure them. After configuring each one, they did start to show up in iTunes. I restored them to their original locations through out the house using wireless connectivity, and they did show up in iTunes and allowed music to play through. Unfortunately, after a day or two, they dropped off, and they never came back. We never had these kinds of headaches with the Microsoft router, so I'm wondering if there is some incompatibility with the Linksys and Airport Express, or if there is some configuration parameter on the Linksys that I need to tweek. Anyone have any ideas?

I have a similar issue with my Airport Express connected to a Linksys wired router (BEFSR41, the common Linksys 4-port router). My iMac is connected (wired) to one of the ports on the Linksys and the AP Express is connected to one of the other ports. Airport Admin on the iMac can't see it unless I manaully connect to it by specifying the IP address (having fixed its IP from my PowerBook via wireless) and (of course) iTunes on the iMac can't see it either.
I had an older generation BEFSR41 and this setup worked great, but they must have changed something. I can't seem to figure out how to disable whatever port-to-port (network jack to network jack on the router that is) that they have added the "blocks" Airport Admin utility from seeing it.
Airport Express Mac OS X (10.4.8) Aiport Express connected to a Linksys BEFSR41 wired router.

I currently have a D-Link DI-604 broadband router with windows computers. How can I add wifi to the network for use with ipad? Can I use AirPort Express?

I currently have a D-Link DI-604 broadband router with windows computers. How can I add wifi to the network for use with ipad? Can I use AirPort Express?

Yes. You can directly connect an 802.11n AirPort Express Base Station (AXn) using an Ethernet cable. The AXn would then just need to be configured as a bridge to allow the D-Link to continue to provide both NAT & DHCP services for all network clients connected to either router.
In this configuration, the AXn would broadcast a wireless network for your wireless network clients to connect to.

Can I use AirPort Express as booster/extender to LinkSys router signal?

I have LinkSys N router (which I got free, else would've bought AirPort), its signal isn't strong enough in office room. Can I use AirPort Express as a booster/extender? Some sources say Express can only talk to another Express, others say it can communicate with the LinkSys. Which is it? I don't want to spend the money for two Expresses unless I have no choice (very limited budget nowadays).
I've been hassling with this for over a month, and I'm extremely frustrated.
Thanks to anybody who can help me with this.

Most likely no. That is because most non-Apple router's implementation of WDS is not compatible ... and this is true the other way around. It is true that some early Linksys models, mainly the WRT-54 series were compatible, but I have not seen anything since then that is.

Can I use airport express in a wired network to play music through my stereo?

I originally used my 1st gen AE to wirelessly stream music from iTunes on my MacPro to my home theater. This works, but there are some good days and some bad days where there are dropouts in the music. I have recently run Cat6 cable to my HT from my router next to my MacPro. This feeds a Gigabit switch that feeds the ATV, receiver, bluray, HD DVD, etc. I plugged in the AE to the switch but it still defaults to the wifi network rather than taking a feed from the ethernet switch. I know i can (and do) use the ATV (gen 1) to steam music, but sometimes it more convenient to use the AE. Is there a way to force the wifi on the AE off and just have it for streaming from iTunes? Thanks.

Yes, you can configure an AirPort Express Base Station (AX) as a standalone wireless router without Internet access for the purposes of providing a Wi-Fi network for streaming. Note that any computers that will be the host of that stream would need to connect to this AX's wireless network while doing so. They would not be able to be connected to two wireless networks simultaneously for both streaming AND Internet access.

How can I use AirPort Express when traveling?

How can I use AirPort Express when traveling?

How can I use AirPort Express when traveling?
Connect the AirPort Express to the Ethernet port in your room.....to be able to create your own private wireless network in your room for multiple devices.
You will still have to pay the hotel Internet charge for one device, if the hotel charges for Internet access.
If the hotel only provides wireless service, then a single AirPort Express will not help you.
However, if you have two AirPort Express devices, then you can use one to "join" the hotel wireless network, then connect the second Express to the first using an Ethernet cable and create your own wireless network for multiple devices in your room.

Can I use Airport Express with iPhone in my hotel room?

Is there a way to set up an Airport Express in my hotel room when I travel, so that the provided High Speed internet cable in the room can be plugged into my Airport Express, giving me a wireless internet connection for the iPhone? I use Airport Express often this way with my MacBook, so I don't have to be tethered to the cable.

I did this about a month ago when I was in England. I just had the Airport Express with me, and had not done any configurations. I plugged it in and had the iPhone find it. It worked in some hotels, and didn't at others. When it worked it was great. I assume with some of the hotels where it didn't work, that I needed to configure it but since I didn't have my laptop I didn't have any way to configure it. Is there any kind of "universal" or "automatic" configuration you can set it up with?

Can i use Airport Express as a range extender in conjunction with my standard (non-Apple) hub ?

I have poor Wifi signal upstairs in my house. Can Airport Express to extend that in conjunction with my current Hub (it's a Livebox - i currently live in France) ? Or do i need to run the Airport Express in conjunction with an Apple Hub ?

Bonjour!
You can extend the Livebox, just not wirlessly as Apple's implementation of WDS only works with other Apple devices.
So you can either use an ethernet cable or as I do with my netgear router turn off the Livebox's WiFi (If that's possible) and use Airports to set up a separate wireless infrastructure. Get 2 APs and plug one directly via etherenet into the Livebox then use WDS to extend this to a second AP wirelessly.
Regards,
Shawn

Can I use airport express with my osx 10.3.9

I have osx 10.3.9 and would like to upgrade to to lion maybe and use airport express if possible .....what do I need to do?
Oneday26

So we know more about it...
At the Apple Icon at top left>About this Mac, report the version of OSX from that window, then click on More Info, then click on Hardware> and report this upto but not including the Serial#...
Hardware Overview:
Model Name: eMac
Model Identifier: PowerMac6,4
Processor Name: PowerPC G4 (1.2)
Processor Speed: 1.42 GHz
Number Of CPUs: 1
L2 Cache (per CPU): 512 KB
Memory: 2 GB
Bus Speed: 167 MHz
Boot ROM Version: 4.9.2f1

Can I use Airport Express for printing and Ethernet printing at same time?

I've been trying to set up a couple of laser printers that were given to me recently. The printers are Apple LaserWriter 16/600 PS and Samsung CLP-510. The reason I'd like to have both up and running is because the black toner for the Samsung costs twice as much as the toner for the LaserWriter. I have two questions that I am hoping someone will be able to answer.
1) The CLP prints a test page just fine. I was finally able to get the Samsung printing while directly connected to my PowerBook G4 via usb (I had to install a Xerox Phaser 6100 driver to do so!). Today I tried putting the usb into my Airport Express (which I use for my portable internet and airtunes) and now the printer does not respond. When I try to add the CLP as a bonjour printer, I get an error adding the printer and the printer does not respond. Can someone offer some advice as to how and if the CLP may work via the Airport Express?
2) The LaserWriter prints a test page just fine. I purchased a transceiver (albeit not an Apple transceiver - this one says Asante Friendlynet, the guy I bought it from said it would work though). The transceiver is connected to the Ethernet port on the printer - and I have a yellow ethernet cable (?) running from the transceiver to the ethernet port on my computer. I read somewhere on the internet that I need to turn on Appletalk in order to use the printer via ethernet but when I went into my network settings to do that, there was a warning that I could not turn on appletalk for ethernet without forsaking my airport. Can someone offer some advice as to how and if the 16/600 PS may work via ethernet without disrupting my (working) airport express? Also - I did not receive any software or drivers with this printer but I read that I may not need to (they come with Tiger - ?) Is anyone able to confirm this?
Any help would be TOTALLY appreciated!
Leigh-Ann

Hello Kappy! Thank you for taking the time to reply to my question.
I should update you at this point to say that I can add the 16/600 PS printer through a process that I found called 'Direct IP printing over ethernet'. (I think I've done this correctly - but I honestly have no idea about network stuff). Here's what I did:
-went into system prefs and looked at the network settings under built-in ethernet tab. Under TCP-IP I found the IP address of my network host.
-In the Printer Setup Utility I tried to manually add the 16/600 PS printer. In the Printer Browser window, I selected IP Printer.
-Under IP printer, I selected LPD Protocol. I inserted the IP address copied from my network settings (above) in the address bar. In the Queue bar I typed in the name of the printer 'Apple LaserWriter 16/600 PS'.
-Again in the Printer Browser box I gave the printer a name and location. Finally, in the 'print using' box I selected Apple and then chose the model from the drop down list. 'Apple LaserWriter 16/600 PS fax v.2014.016'
-I got a dialogue box that asked about other installable features - clicked ok.
-when I tried to print a Word document, the Apple LaserWriter driver opened up and appeared in my dock and then I got an immediate error saying "network host ---.---.--.--- is busy, down, or unreachable..."
-I tried to repair permissions, but it did not resolve my issue.
-I noticed that even after adding the 16/600, it did not show up as a bonjour printer, but remained visible as a printer in my list (although grayed out).
I did some troubleshooting and the best I could find as a close match for my problem was that perhaps I had entered the name incorrectly in the Queue box...? If anyone knows how to find the appropriate name to insert I would sure appreciate knowing.
Finally - you should probably know that I received this printer from someone else. I guess I'm wondering if I need to be resetting network settings on the printer somehow? The test page lists the following:
Ethernet (Address: 08:00:07:84:78:e9)
EtherTalk: PostScript
NetWare: AutoSelect
TCP/IP: AutoSelect
IP address: 0.0.0.0
And - now finally, to answer your questions (the best I can, that is)
I did connect the yellow network cable directly into my laptop (right side, 4th input, counting away from me). I have a portable internet modem that plugs into my wall (for power) and then has a cable (Ethernet?) that goes into my Airport Express (LAN port?). I have no other router and there are no other inputs or outputs on my modem. My Airport Express has only one input for the modem, one mini input for airtunes, and one usb input (in which I have a cable connecting to my other laser printer (now working wirelessly via Airport Express!!)
Should I have these cables hooked up differently?
What is a Phonenet adaptor? My internet is provided via a cable service (not DSL). It is wireless and portable - I can take it to any major city in Canada and it works as long as it is plugged into a power source and near a window.
I really appreciate any help you can offer. At this point I must have spent the better part of almost two weeks trying to get these older laser printers up and running.
Thank you again.
Leigh-Ann

Can't use Airport Express after upgrading to Leopard

I use Airport Express for wireless printing and AirTunes via powered speakers/hifi. It was working very reliably until I upgraded to Leopard. Now, I am unable to use Airport Express. I get the blinking orange light, but when I scan with Airport Utility, Airport Express is not detected. Manual setup is grayed out, so I can't set it up at all. I am using Airport Utility Version 5.2.2 (522.3), and there does not seem to be any updates or patches to apply at the moment. I have tried on my iMac G5 and MacBook, with the same result on both computers.
I am also reading that many others are having problems with Airport Express after upgrading to Leopard, perhaps not with my specific hardware configuration, but this is very disappointing.
I am open to suggestions to try a few things to get it working, so any help is appreciated.
Message was edited by: a j

From the Mail menu, select "Preferences". Hit the Accounts tab. Select the Account. Under Account Information, reapply the user name and password.
Check with the provider if the account needs authentication. This is in the Advanced tab. Usually just a repeat of user name and password.

Can I use airport express to create a local wireless network that my apple tv can connect to for AirPlay/mirroring in student halls/dorm without Internet connection

Hi I was wondering :
Would I be able to make a local wireless network using airport express that my apple tv can connect to which in turn is connected to a projector with hdmi in so that I can mirror/AirPlay from iPhone pad and mac

will the Airport Express allow you to log onto a hotel wireless network, and broadcast a secure wireless network in your room for your wireless devices, like the Ipad, Iphone, etc.?
The bottom line with a single AirPort Express is no.
The AirPort Express can only "extend" a wireless network when the network is being provided by another Apple router.
As you might imagine, it is extremely unlikely that that the hotel network....which no doubt uses professional wireless access points provided by a manufacturer of commercial systems.....would be compatible with an AirPort Express.
In many years of travel domestically and internationally, I cannot recall a time when a single AirPort Express would "extend" the signal provided by a hotel's wireless network.
However, if you had two AirPort Express devices handy, you might be able to configure one to "join" the hotel network and provide an Ethernet signal to the second AirPort Express, which would be configured to "create" your own "private" wireless network.

Can't get Airport Express to work with Windows

I got a used Airport Express to use as a wireless print server. I got only the Airport Express; no manuals or CD's or anything. I have been reading through the manuals and everything online, but I can't get anything to work. It seems like I need to get the Airport Express Assistant, but I can't find it. I got the Airport Admin Utility, and that installed fine on Windows Vista. Then I installed what I thought was the Express Assistant, and it just seemed to change the Airport software in the start menu, but I still don't have the Assistant, only the Admin Utility. Anyway, I open the Admin Utility and it opens the Base Station Chooser. There is nothing there, so I rescan, and it seems to do nothing. It doesn't find anything anyway.
Where do I go from here? I am kind of stuck. I am trying this on a Windows Vista PC which is hardwired to a Linksys WRTSL54GS router. I have the airport express plugged in and the light is flashing Amber. I have a HP psc2410 plugged into the airport express that I would like to print wirelessly to.
Thanks for any help.

You don't necessarily need the AirPort Setup
Assistant, you should be able to set up the AirPort
Express Base Station (AX) with the AirPort Admin
Utility...as it is a much more powerful tool. You
need to make sure that you are using the version for Windows. At this
time, the AirPort software is only supported for
Windows 2000 or XP. A Vista-version has not been
released.
I suggest the following...
- First, perform a "factory default" reset on the AX to get
it back to it's original "out-of-the-box" state.
- Next, temporarily connect your computer directly,
using an Ethernet cable, to the Ethernet port on the
AX during the set up phase.
- Then set up the AX as a "wireless client."
I have this same problem. I have a Vista Windows notebook and I am trying to get airport working to play music wirelessly through my home stereo. The "base station chooser" software does nothing on my Vista notebook.
I used a friend's MacBook and was able to set up the airport as a client so I can see it listed in my Dlink router DHCP Client Table. The airport express box is plugged in, has a steady green light and everything looks good except there is no option to choose "computer" or "home stereo" speakers in my iTunes. i installed the airport express CD including the itunes it came with.
Any ideas how to get this working on vista? Previously i had the newer version of iTunes 7.1 installed and the airport express CD told me it couldn't complete the install because a newer version of iTunes was installed. I uninstalled the iTunes and reinstalled the CD including the iTunes version 4.
Help!
Sony Vaio Windows Vista

Can I use Airport Express's Airtunes with a non-Apple modem/router?

Similar Messages

Maybe you are looking for