Can I use an AutomationDirect T1H-EBC ethernet base controller with Labview?

Do I need to purchase an opc server?

Yes, You will need to purchase some type of communication "translator". If you purchase an OPC server, then you can use the datasocket VI's in LabVIEW to communicate to the device via OPC.

Similar Messages

  • T1H-EBC Ethernet I/O and Labview

    Hi,
    Has anyone written Labview VIs to talk to Automation Direct's Terminator
    Ethernet I/O T1H-EBC (without using OPC Servers). Anyone have any
    experiences in
    using AD Terminator I/O with fieldpoint? Their device seems very similar
    (in functionality) to the FP-1601 Ethernet unit. I figure it'd be similar
    as the FP VI's....
    Regis

    You will need to use the TCP VIs or access any DLL installed on your computer that will communicate with the hardware.
    If you are going to use TCP, you will need from automation direct the structure for the TCP commands. If you do it via DLL you will need the DLL register mapping to access the DLL from LabVIEW.
    Contact Automation Direct to see if they can help you with this.

  • Can you use a 3600 for an Ethernet bridge??

    Can you use a Cisco 3600 to do a P2P bridge? Using the MAP's ethernet port  to connect to a remote LAN?  On that remote LAN can you have  lightweight APs that connect to a controller on the RAP side?

    Can you use a 3600 for an Ethernet bridge??
    http://www.cisco.com/en/US/docs/wireless/controller/7.0MR1/configuration/guide/cg_mesh.pdf
    Check - Converting Indoor Access Points to Mesh Access Points
    Ethernet bridging has to be enabled for the following two scenarios:
    1. When you want to use the mesh nodes as bridges.
    2. When you want to connect Ethernet devices such as a video camera on the MAP using its Ethernet port.
    Wireless Backhaul:
    In a Cisco wireless backhaul network, traffic can be bridged between MAPs and RAPs. This traffic can
    be from wired devices that are being bridged by the wireless mesh or CAPWAP traffic from the mesh
    access points.
    Guidelines For Using Voice on the Mesh Network
    • Voice is supported only on indoor mesh networks in release 5.2, 6.0, 7.0, and 7.0.116.0. For
    outdoors, voice is supported on a best-effort basis on a mesh infrastructure.
    other factors to note:-
    #you would be running on backhaul using A radio which is prone to DFS.
    #CAPWAP may not tolerent enough with AWPP convergence on MAP roaming.
    #CAPWAP is more latency sensitive than voice.

  • How can i use Itunes to update more than one IPad with more than one owner

    How can i use Itunes to update more than one IPad with more than one owner?  I own an IPad and my wife owns an IPad.  I want to use my system to update both IPads.  We have different Apple Accounts and different applications.  Is this possible?

    Of course, that is too easy.  I am such a bonehead.

  • Can I use Adobe photoshop CC classroom in a book with Photoshop CS6?

    Can I use Photoshop CC classroom in a book lessons with Photoshop CS6?

    Yes, there will be some new features in CC that CS6 does not have, but 97% will be the same.

  • Can I use the ipod classic as an external hardrive with time machine as well as an ipod for my mac book pro OS X?

    Can I use the ipod classic as an external hardrive with time machine as well as an ipod for my mac book pro OS X?

    No. Time Machine has been specifically written not to back up to an iPod.
    (58364)

  • II  downloaded the OS X version 10.9 and my iPhoto version 9.2.3 will n.ot open.  I get a message that I can't use this version of the application I photo with this version of OSX.  What do I do now and how do I get the photos out of the old version?

    I downloaded the OS X version 10.9 and my Iphoto version 9.2.3 will not open.  I get a message that I can't use this version of the application I photo with this version of OS X.  How do I upgrade to a i photo that will run on 10.9.  Do I purchase a new program or can I do just an download?

    Check the "Purchases" page in the Mac App Store and see if there is a more recent version there already waiting for you.

  • Can I use ASUS VM60-G072R Desktop (like mini Mac) with my iMac all in one computer? I need to use Windows version of QB and I don't want to buy a PC tower or laptop.

    I need to use the Windows version of Quickbooks Pro and I don't want to use Parallel or buy a PC tower or laptop. Can I use ASUS VM60-G072R Desktop (like Apple Mini) with my iMac all-in-one computer?

    Thank you Kappy. I guess I have to decide to purchase a separate monitor and keyboard for this mini PC computer then. And also find extra space in my office. I'm happy you answered my question so quickly.

  • Can I use a power cord from a Macbook air with a Macbook?

    Can I use a power cord from a Macbook air with a Macbook?

    No, the MacBook Air power adapter is a 45 watt. A MacBook needs at least a 60 watt power adapter although you can use a MacBook Pro 85 watt adapter. You can use a higher wattage adapter without any problems.
    http://support.apple.com/kb/HT2346

  • What file format can be used to play 3D videos on Panasonic TVPlasma3D with USB PenDrive?

    What file format can be used to play 3D videos on Panasonic TVPlasma3D with USB PenDrive?
    I writed to Panasonic Italy support about this question:
    "What file format can be used to play 3D videos on Panasonic TVPlasma3D with USB PenDrive?"
    Panasonic writed me in a very poor manner and said me:
    "...riproduce formati: AVCHD (anche 3D), SD-Video, DivXHD, JPEG, MP3, AAC tramite USB e Slot SD/SDHC/SDXC card..."
    "...formato : AVCHD estensione file nella SD: .MTS..."
    I made a few videos edited with PremiereProCS5 and exported as H.264 Coding and .mp4 file extension, all side by side, with layout 1920x1080pixels that includes two stretched frames at 960x1080 pixels.
    This is the same image layout that uses the Panasonic 3D consumer camcorder "HDC-SDT750", that record AVCHD videos with file extension .MTS.
    I also tried to export another video as MPEG2 with .mpg file extension.
    But at the store the tests failed, and I cannot see anything!
    My questions are:
    1) What format can be used by PremiereProCS5 for exporting the Stereoscopic 3D videoclip and play them via USB port on Panasonic TVPlasma3D such "TX-P46VT20"?
    2) What codec should be used? H.264? H.264-bluray?
    3) What file extension should have the movie file? .mp4?
    Many Thanks!
    Horsepower0171.

    -I already read entirely those threads, but nothing about stereoscopic 3D AVCHD movies through USB port, on Panasonic TVPlasma3D.
    (Also, Sony said me that is not possible to play 3D videos on your 3DTV through USB port).
    I tried to made a H.264 videoclip, with .MP4 extension, at 960x1080p side-by-side layout, but nothing was displayed, and black screen.
    I think that just the AVCHD movies, with .MTS extension, that comes from Panasonic consumer camcorder "HDC-SDT750", can play the 3D videos via HDMI cable, not USB port.
    But not the exported videos from PremierePro via USB port.
    I seen this tutorial from David K Helmly:
    http://www.youtube.com/user/dhelmly#p/a/u/1/_YtF0c2bmkw
    Dave export the video from PremiereProCS5 as "MPEG2-bluray" format with "Match Source Attributes (HighQuality)" Preset, and build the Bluray Disc in EncoreCS5, with the footage as MPEG2 with .m2v file extension:
    1) Anyone tried to play correctly in 3D, those MPEG2-.m2v side-by-side files, in Panasonic3DTV, with BlurayDiscReader?
    2) Why MPEG2.m2v side-by-side?
    3) The official standard stereoscopic 3D format, is not the .MVC (MultiViewCoding) for Bluray3D Disc?
    I am confused!
    Help!
    Horsepower0171.

  • I have just bought a 2011 iMac (2.5 ghz, 4gb) and logic express 9, and when i installed logic and tried to run it i had a message saying 'you can't use this version of the application logic express with this version of Mac OS X. How do i sort this out!?

    I have just bought a 2011 iMac (2.5 ghz, 4gb) and logic express 9, and when i installed logic and tried to run it i had a message saying 'you can't use this version of the application logic express with this version of Mac OS X. How do i sort this out!? It is very frustrating as the main reason i have bought  a mac is to use logic! Any help would be great as i am a complete novice when it comes to Macs!

    You're probably on OS X Lion?
    I had the same problem as you. I used Software Update to update Logic Express to the latest version, and then it ran without any problems.

  • You can't use this version of the application "logic pro" with this version of os x

    After installing all of Logic Studio (i.e. install dvd, audio content 1-3, jam packs 1-3), my laptop concludes that everything is installed successfully, however, when going to open to Logic, error icon appears and says:
    'you can't use this version of the application "logic pro" with this version of os x'

    Thank you! I found that just after I entered the question. I reinstalled everything two times, updated software, but was still having issues. But, I specifically updated the 9.1.8 (which was supposedly included in my standard software update). Guess I needed to give it some extra attention and affection.
    P.S. - Why do I feel like the more I upgrade versions of OS X, the worse off I am getting or am? Isn't it supposed to be opposite...isn't it supposed to make things better...come on, mac...where you at? mt. lion or mavericks. I'm downloading Snow Leopard to make some programs run. (um, yeah).

  • HT5287 Can I use remote disk on a 2008 unibody MacBook with no optical drive?

    Can I use remote disk on a 2008 unibody MacBook with no optical drive?

    According to the link you came from the only MacBooks this works with are MacBook Air and MacBook Pro with Retina display. If yours is not one of these I can see no harm in trying it.
    You could consider getting an external optical drive.

  • Unable to open mail, address book etc due to this message:  You can't use this version of the application Address Book with this version of Mac OS X. HELP!

    I am transferring my mother's address book and mail etc to my computer from an external hard drive enclosure and am not able to open it due to this message:  You can't use this version of the application Address Book with this version of Mac OS X. HELP!  Is there a way to open her older applications and get the info out?

    her email is in user>Library>Mail folder. Hopefully you've created another user on your Mac for your mother so she would have her own user Library.

  • Can I use my Samsung Galaxy 3 as my reader with digital editions?

    Can I use my Samsung Galaxy 3 as my reader with digital editions?

    You should install an app such as Bluefire or Aldiko, or for Overdrive if it is just for library books.
    I don't think the device will actually show up in Digital Editions (ADE).
    For non-DRM books you don't need ADE at all.
    For DRM books you need to make sure the app is registered to the same AdobeID as your copy of ADE.
    You can than
    get books onto ADE in the usual way,
    'sideload' the .epub to the Galaxy; eg copy using a file manager such as Windows Explorer or Mac Finder
    read the books on the Galaxy.
    Good luck.

Maybe you are looking for

  • Iphone 4s battery draining too fast

    I just received my iphone 4s and I have upgraded from my 3s, after holding on for so long I am so disappointed with the battery life. after 2 phone calls the battery drains 15 %, I have turned off all the features to make sure it lasts me at least ti

  • About XML Reading and Writting

    In My project it is a DBMS using XML Schema i want to restore the file "DataBase" and then append on it (copy the file values onto the tree memory and continue working on it)

  • Control operation - timing

    I am using a 6601 DAQ card, and LabVIEW v.5 to execute my experiments. I am looking for an example / application which might be used to generate in two counters (one is for the camera, second for an LED array) different finite pulse train gated (trig

  • Dynamically assign fields to table control

    Hi All, I have some requirements with me... I have a report which has an output table. The output table will be filled based on some conditions. ex... 1) select name, id, date       2) select name, id, time  (just an ex) My output table contains name

  • Error while running the SPAM for VIRSA Patch

    Hi, We are performing a patching over a ECC system for stack 10. kernel : 701 - 150 level. Initial stack    :- EHP4 FOR SAP ERP 6.0/NW701 -->04 Target Stack :- EHP4 FOR SAP ERP 6.0/NW701 -->10 The import was stopped, since an error occurred during th