Can I use an OSX 10.6.3 install disk to upgrade from OSX 10.5.8

Can I use an OSX 10.6.3 install disk to upgrade from OSX 10.5.8

Yes. And, see below:
Upgrade Paths to Snow Leopard, Lion, and/or Mountain Lion
You can upgrade to Mountain Lion from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99. To access the App Store you must have Snow Leopard 10.6.6 or later installed.
Upgrading to Snow Leopard
You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard — Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
     Snow Leopard General Requirements
       1. Mac computer with an Intel processor
       2. 1GB of memory
       3. 5GB of available disk space
       4. DVD drive for installation
       5. Some features require a compatible Internet service provider;
           fees may apply.
       6. Some features require Apple’s iCloud services; fees and
           terms apply.
Upgrading to Lion
If your computer does not meet the requirements to install Mountain Lion, it may still meet the requirements to install Lion.
You can purchase Lion by contacting Customer Service: Contacting Apple for support and service — this includes international calling numbers. The cost is $19.99 (as it was before) plus tax.  It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
     Lion System Requirements
       1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
           or Xeon processor
       2. 2GB of memory
       3. OS X v10.6.6 or later (v10.6.8 recommended)
       4. 7GB of available space
       5. Some features require an Apple ID; terms apply.
Upgrading to Mountain Lion
To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
     OS X Mountain Lion — System Requirements
       Macs that can be upgraded to OS X Mountain Lion
         1. iMac (Mid 2007 or newer) — Model Identifier 7,1 or later
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) —
             Model Identifier 5,1 or later
         3. MacBook Pro (Mid/Late 2007 or newer) — Model Identifier 3,1 or later
         4. MacBook Air (Late 2008 or newer) — Model Identifier 2,1 or later
         5. Mac mini (Early 2009 or newer) — Model Identifier 3,1 or later
         6. Mac Pro (Early 2008 or newer) — Model Identifier 3,1 or later
         7. Xserve (Early 2009) — Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
Are my applications compatible?
         See App Compatibility Table — RoaringApps.
     For a complete How-To introduction from Apple see Upgrade to OS X Mountain Lion.

Similar Messages

  • Can i use someone else's Snow Leopard boot disk to upgrade my mac?

    I am unfortunately at that stage in life where as a teenager i have many lusts and "needs" but have hit the road block... money.
    I have enough to buy lion through the appstore but have not got enough to first upgrade to Snow Leopard and THEN Lion as well.
    If my dad has a Snow Leopard boot disk with his mac, can i use it to upgrade mine and then go on to buy Lion through the Mac Appstore?
    Thanks!

    No for possibly two reasons ... First, that's illegal as it's a violation of the Apple license agreement, and second, boot disks are locked to the system type they are delivered with.  Ask your Dad instead how you can earn $29 doing some chores around the house, or let the word get out that for any holiday gifts in December that cash would be appreciated.
    Since you're on Leopard today, you probaby know in wanting to move to Lion that Lion no longer has the Rosetta emulator and thus doesn't support anything with PowerPC code. That's surprised some, so just FYI. 

  • Can you use the newest version of quicktime pro 7 with a mac osx 10.4

    can you use the newest version of quicktime pro 7 with a mac osx 10.4?

    No. The newest you can is version 7.6.4.
    (58439)

  • How can I upgrade from OSX 10.7 to 10.9 on my 2012 mac mini? (2.3 GHz, 4 GB, 500 GB SATA disk) I don't want OSX Yosemite.

    How can I upgrade from OSX 10.7 to 10.9 on my 2012 mac mini? (2.3 GHz, 4 GB, 500 GB SATA disk) I don't want OSX Yosemite.

    If your Mini shipped with OS X 10.7 Lion, then it was considered a 2011 build model, or before.
    The Mini 2012 model, is considered a Late 2012, & the last one where RAM could be upgraded.
    And it shipped with Mountain Lion 10.8, which is a fairly OK system if one had older software.
    (However mine shipped in Dec 2014, with Mavericks 10.9.0, and was built in January 2014.)
    There were a few different build versions of Late 2012 Mac Mini, the i5 or i7 processor,
    in dual-core or quad-core, and some CTO or built-to-order versions with other specs.
    You can buy Mountain Lion from online Apple Store, & use a download code emailed to you to
    get the Mt. Lion 10.8 from Apple Servers; this would be about it, since Mavericks isn't available.
    So hopefully that is an option you can exercise; in addition the computer may prefer more RAM.
    Good luck & happy computing!

  • Can we use two separate apple ids on one laptop to upgrade apps

    can we use two separate apple ids on one laptop to upgrade apps

    Welcome to the Apple Community.
    Only if you use two separate user accounts.

  • Can i use a 2nd iphone if i install itunes on another user account.when i tried to create a second library i messed up both phones, the second one now has all my contacts and when it sends txts it either says its my other phone or email address

    can i use a 2nd iphone if i install itunes on another user account.when i tried to create a second library i messed up both phones, the second one now has all my contacts and when it sends txts it either says its my other phone or email address. i can cope with the first phone and getting it back on itunes but dont want to syn the 2nd phone until i know it is independant of the other one. Does it matter that both phones use the same itunes store account?

    Deleting the account on your phone only removes if from your phone.  The account and it's data remain intact and doing so will not effect your daughter's phone.
    To do this, first go to Settings>iCloud on your phone and turn any synced data (contacts, calendars, etc.) to Off, and when prompted, choose to keep the data on the phone.  When finished, scroll to the bottom and tap Delete Account.  Then set up a new iCloud account with a different Apple ID and turn any data you want to sync with iCloud (contact, calendars, etc.) back to On.  This will upload your data to your new iCloud account.

  • How can I use an American credit card to pay for a membership from outside the US?

    How can I use an American credit card to pay for a membership from outside the US? My payment page is set up for Japanese credit cards. I can't change to the US store, because the "Select a Store" page just jumps to the "Products" page.
    Has anyone else had this problem? Any help would be much appreciated!

    Hi Batt5721,
    Welcome to Adobe Forums.
    The address and the country on the Credit Card should match the billing address then only payment would be possible.
    Thanks
    Garima

  • Can I use an iTunes gift card to order a photo book from iPhoto for iOS?

    Can I use an iTunes gift card to order a photo book from iPhoto for iOS?

    no - credit card or debit card only unless they have recently changed their policy
    LN

  • Can i use another storage flash for my apple air mackbook(change from current 128Gb to 256GB without any issue)

    Can i use another storage flash for my apple air mackbook(change from current 128Gb to 256GB without any issue)

    There are some upgrade options available from do it yourself sites.
    See the MBair SSD upgrades on mid way down this page:
    http://eshop.macsales.com/shop/SSD/OWC/

  • Can I use my Time Capsule as a backup disk and storage?

    Can I use my Time Capsule as a backup disk and put files from my other USB external hard drive on it, using the TC as an external as well?

    Actually, there is a way to limit the amount of space Time Machine uses for backup so that it won't eat up all your disk space...for example, I have mine set to only use 65GB, and then it starts to overwrite older backups...Google it for more info. To begin with, I deleted my Sparse Disk Image Bundle from Time Capsule, and used Disk Utility to create a Sparse Disk Image Bundle (turn off backups first!!!) with a capacity of 65GB in HFS Journaled, Case Sensitive...The Image must be named as follows "Full Computer Name_Ethernet MAC Address" (The ethernet MAC address is used even if you plan to solely use wifi for backups). for example, my Sparse Disk Image Bundle name is "Ahmad Atiya's MacBook Pro_00254b9d8f72.sparsebundle" Move this image to your time capsule's main directory (if you didn't create it there to begin with). Go to your Time Machine preferences, turn it on, and set it to use your Time Capsule. It should start using the image you created. If you click "get info" on the disk image, it'll show a capacity of whatever you created.

  • Can I use my Verizon Smart Rewards toward an iPhone 6 upgrade?

    Can I use my Verizon Smart Rewards toward an iPhone 6 upgrade?

    No.  Best you can do is try for auctions on gift cards, or look at the daily deals at 2pm EST for points only cards.

  • Drivers/Utilities CD..XP and VISTA..can I use vista for WIN7 64 bit install?

    Drivers/Utilities CD's, that came with the p-35 Motherboard..XP and VISTA..can I use Vista for WIN7 64 bit install, or download the chip set drivers for Awin7 BEFORE the OS install??
    MSI P-35 Platinum
    Q6600 Core 2 Quad
    Presently XP 32Bit
    NVidia geforce 8600GT
    8GB DDR2 SDRAM PC6400-800MHz
    Windows 7..waiting to be installed.
    Hello,
    I WANT TO DO A CLEAN INSTALL.I have Windows 32 Home XP, I have the Win7 OEM I want to install.
    When i bought my MSI mobo, it came with both the drivers and utilities for XP and Vista.   Can I use the chip set drivers and utilities for Vista, until i can go to MSI and download the latest chip set drivers?  When do i install these drivers....before the OS install, or after?
    Can I format these drives first, go in the BIOS change to boot sequence from Raptor Boot Drive to the DVD/Rom to boot the WIN7 from, or should I format while installing Win7?  
    Someone on another forum suggested that 1) disconnect the two droves, then install the OS on the boot drive, and2) before win7 install, make the proposed boot drive (NOT THE DVD/CD ROM the first choice priority for the boot sequence....is this right?
    Is it absolutely necessary to unplug the other two drives, while formatting and installing the WIN7 O.S.?  People tell me that there is a chance of the OS installing sometimes on the other drives.
    Also, if I want to change the now present boot drive Local disk letter (C) to my storage drive (G) and the other two drive letters, can I do this in manage disks, anytime, or only during windows setup install?
    Thx

      I've never had this much trouble hooking up a HDD.
           I have two IDE DVD/CD ROMS.  (My RAID MODE was IDE in XP OS, and still is with WIN7.)
           I have three SATA HDD's.
    After unplugging the SATA 2TB HDD while I installed the WIN7 OS on the 500 GB HDD (it was on the 74 RAPTOR, but I moved location, and made absolutly sure nothing went on my raptor)
      So today I decided to re-hook up the 2TB Storage HDD, and when I did, I went into bios,and to the cell menu, and LOAD ALL DEFAULT SETTINGS, so it could see my newly installed HDD,which I had all my backup Data from the previous HDD. I also checked and the RAID MODE was IDE, and the boot sequence was the WDC 500GB Boot/OS drive, rebooted,then I got that annoying blanked out screen with that blinking cursor, so I got back into the bios,and changed the 1st boot to the IDE Pioneer DVD/CD ROM, 2nd boot to the 500GB HDD, and rebooted again..still got that blinking cursor.
    I opened up the Mobo, checked and replugged all SATA, and power cables to the three HDDS, tried it again,then still got the blinking cursor.  Seems no matter what I change in the boot sequence,it never wants to boot properly
    ....AND THEN,
     I started with TAB > POST> started WINDOWS, then once it opened up, I went to manage Disks, saw all three HDDs were online and healthy.  Win. Explorer also listed them in that folder, in device manager, it listed all three too.
     The managed window showed this:
    74GB    (system,active,Primary partition)                       Storage
    2TB     (Primary partition)                                           Excessive Storage
    500GB  (Boot, page files,crash-Dump, Primary partition)   Operating system
    Both the PCI IDE BusMaster and ON-Chip SATA Controller were both ENABLED.
    Before I just got online, I tried RESTART, and it opened Windows the usual way,  so I hope I don't have any more problems. It worked fine BEFORE I just plugged in the 2TB HDD back in.
    I pretty much did what everyone suggested,except for leaving in the 74GB Raptor when I installed WIN7, which prompted me to format the drive prior to installing the OS.  Also, when I changed the IDE, RAID,and AHC1, to the AHC1 Mode, just before I installed Window7, like a few suggested, I also had problems, so after the install, I went back and changed it back to IDE.  My Floppy was an IDE, but I removed it from my system, and disabled in BIOS, but even a few times I went into Bios and saw that thje floppy was 1st Boot, even though I changed to either the DVD/CD Rom, or the 500GB boot drive.            
    So what is the preferred boot sequence?   

  • When I try to install Lion it tell's me "You can't use this version of the application install mac os x Lion with this version of Mac os x" even though I have the latest update 10.5.8 of Mac os X?

    When I try to install Lion it tell's me "You can't use this version of the application install mac os x Lion with this version of Mac os X" even though I have the latest update 10.5.8 of Mac os X?
    The install icon has this sign on it 

    moose0422 wrote:
    You can't install Lion over Leopard. To install Lion, a requirement is Snow Leopard. So you can either upgrade to Snow Leopard first or you can make a bootable Lion install disc and use that to wipe your hard drive and install a fresh copy of Lion.
    So to make a disk would require you to purchase Snow Leopard and upgrade to 10.6.8 so you can use the App Store, unless you have access to another computer to download it from with your Apple ID. Remember it is about a 3.4GB download.
    Good Luck

  • Can I use Final Cut Express 4.0.1. to import movies from Panasonic VDR-D250?

    Can I use Final Cut Express 4.0.1. to import movies from Panasonic VDR-D250 via USB 2.0? How? (page in handbook?)
    Further specifications of this older camera:
    USB 2.0
    DVD-RAM (cannot be inserted in my MBP!)
    50-PAL (signal)
    MPEG2
    Dolby Digital
    I want to use FCE if possible but maybe could try to install the software of this camera on Windows virtual XP also on my MBP?

    I forward an answer of Panasonic (written in German):
    So Panasonic does not offer a software which is compatible with Apple!
    Bezug nehmend auf Ihre Anfrage teilen wir Ihnen mit, dass der Camcorder
    VDR-D250 die Videoaufnahmen nach dem DVD-Videostandard sowie nach dem
    DVD-VR-Standard aufnehmen kann. Wir können jedoch nicht beurteilen ob Ihre
    Software Final Cut Express 4.0.1 die Bearbeitung dieser Standards
    unterstützt. Seitens Panasonic wird weder eine Apple kompatible software
    noch Support für Apple Geräte angeboten. Wenden Sie sich diesbezüglich
    bitte an Ihren Apple Händler oder Ihren Computeradministrator. Die
    mitgelieferte Software des Camcorders ist ausschließlich für folgende
    Betriebssysteme vorgesehen:
    - Microsoft Windows 2000 Professional
    - Microsoft Windows XP Home Edition
    - Microsoft Windows XP Professional
    Ob diese Software in einer virtuellen Umgebung genutzt werden kann ist uns
    nicht bekannt. Um die mit dem Camcorder aufgenommenen DVDs an einem
    Computer-Laufwerk auslesen zu können müssen diese vorab mit dem Camcorder
    finalisiert werden. Ausnahme ist die Verwendung einer DVD-RAM.

  • How do you solve error "You can't use this version of the application Install Mac OS X.app with this version of Mac OS X" when trying to go back to leopard from lion?

    How do you solve error "You can't use this version of the application Install Mac OS X.app with this version of Mac OS X" when trying to go back to leopard from lion?
    Local Mac shop said to hold down "c" after inserting disk to get "disk utility" to come up in order to wipe hard drive.  I can't seem to get it to do this.

    This W7 was purchased for using Fusion, as others did - per reviews from amazon.  The technician today called their contact at VMWare - Fusion not officially for use with Lion - even though I read at the VMWare support site that others have made it work.  Apparently my setup doesn't work. 
    Do you know how to do the proceedure for bringing up the disk utility when starting the disk?
    BTW, some of the windows applications I want to continue using are Incredimail, Calendarscope, Stamps.com and a few others I have used over many years.  What do you use for email and calendar?
    Wow, sounds like another reason to not use MS Windows.
    Regarding your Disk Utility question, please elablorate I'm not sure what you're trying to do. Disk Utilty is just that...a utility, it's something most users never have to use especially on a new computer. Let me know what you're trying to do there before I give you some instructions.
    As for as your Windows apps I would recommend using Mail and iCal, both come as part of OS X and are very robust tools. Don't discount the software built right into OS X it's very robust and powerful not all like the bloatware most Windows boxes ship with. Stamps.com well I'd look for another alternative. It's clear they don't support OS X which makes me a little suspicious that they're so behind the times. 
    Also if you have not been exposed to these links before I'd strongly recommend bookmarking them and using them. They're extermely useful!
    Switch 101
    Mac 101
    Find Out How Video tutorials

Maybe you are looking for

  • Palm Desktop datebook data file

    I've been a Palm user for 13 years. A year ago, my trusty Z-22's battery died. So I bought a M500 online from one of Amazon's 3rd party vendors. It worked adequately, but with a number of glitches that I learned to live with. By July or so of this ye

  • How to install and use icloud in imac windows 7 based

    How to install and use icloud in imac windows 7 based

  • I have problem with :k7n2-vb"

    Hi, I'm Borislav Kiso from Yugoslavia and I have small problem with my mainboard "k7n2-vb". If it's a problem, i hope that you will tell me the answer. Mainboard permanently generate, with out any rules, bips. Even when I move my data from cd on hdd

  • Sales Report does not have the items in AR Reports

    Hi Team, We have got one query saying sales tax details and AR tax details is not matching. Sales documents are posting automatically at the time posting BSEG table and BSET table will get update and the issue is here now for few documents BSET table

  • How do I add a selection screen parameter to get a application server file

    Hi All.. Can you please suggest how can we add a selection screen parameter to get a application server file ? Thanx in Advance... Regards, Deepak