Can i use cdma for internet and gsm for phone at a time in Iphone4s?

Can i use cdma for internet and gsm for phone at a time in Iphone4s?

No. Phones sold by GSM carriers can't access CDMA at all and phones sold by CDMA carriers can only access GSM if they are a) unlocked and b) in an area where there is not CDMA.
Best of luck.

Similar Messages

  • Multiple iphones each with an apple id - can i use the same laptop and itunes for back up, restore and updates?

    We have two iphones each with a different apple id - can i use the same laptop and itunes for back up, restore and updates without risking having my apps overwritten.  Basically does itunes keep the two iphones as two separate entities ?  Does iTunes differentiate between the two devices and keep two different SYNCs ?

    Yes, you can use the same computer for BACK UPS, RESTORING AND UPDATING. But that is it.
    You cannot, however, use it to sync the different devices. iTunes will only recognize one device to sync with and if you sync any other devices with that iTunes library, it will replace what is on the phone with whatever is in the library. It cannot differentiate between devices. At most, it will jsut recognize that the phone has been synced with a different iTunes library.
    So if you would like to use the same computer for backing up, restoring and updating, just make sure to turn of Automatic Syncing in your iTunes Preferences.

  • I have a Ipod Nano and want to get another one , and use both. Can I use the same computer and library for both?

    I have a Ipod Nano and want to get another one , and use both. Can I use the same computer and library for both?

    Yes

  • Use airport for internet and ethernet for local?

    Hi. Ive searched around and cant find an answer for this.
    I have a 27" imac connected to my router and all works fine for accessing the internet.
    I have several other devices close by that I want to connect via ethernet. If i connect the imac to another router via ethernet I can browse my local devices but loose internet connectivity. It is as if the imac will suspend the airport connection while the ethernet cable is connected. I don't want my second router to act as a bridge as it doesn't support N speeds.
    Essentially, I want the imac to use airport for internet and the ethernet port for local files.... The only workaround I have is to unplug the ethernet cable from the back of the imac when i want to use the internet. I'm hoping it's just a DNS issue, but cant seem to resolve it.
    I do not need internet connectivity for the other devices and don't see how i can do that without enabling the wireless side of my second router and then creating a bridge...
    Any suggestions?

    It is as if the imac will suspend the airport connection while the ethernet cable is connected.
    The Connection Order on your iMac is set so that if both AirPort and Ethernet are "on", the iMac will give priority to the Ethernet connection.
    If you want to configure your iMac so that it gives priority to an AirPort connection if both AirPort and Ethernet are "on", give this a try:
    Open System Preferences (gear icon on the dock) and open Network
    Click on the small gear icon at the bottom of the connection list on the left
    Click on Set Service Order and drag AirPort to the top of the connection order list
    Click OK, then click Apply
    Now, if both AirPort and Ethernet are active, your iMac will give priority to the AirPort connection. If you want to connect using Ethernet, you will have to turn AirPort off by clicking the fan shaped AirPort icon at the top of your computer screen.

  • How can i use an barcode scanner and a keyboard at the same time on Ipad

    HI I am looking to find a way to use a barcode scanner and the on screen key bard at the same time, so far i cant seem to find a way to do it.
    Does any one know how this can be done.
    thanks

    It is possible, I use multiple versions, however Firefox official policy is that you use firefox3.6 or 5 ; not firefox 4 which is not secure and not supported.
    The easiest solution may be to use firefox portable http://portableapps.com/apps/internet/firefox_portable/localization#legacy36 although firefox 3.6 will itself not be supported for much longer.

  • Assign wifi for internet and Lan1 for internal network

    I have a lan connection to my office which it has access to internet by proxy and I have wifi to access directly to internet
    How can I assign wifi just for access to the internet and Lan just for internal net work?
    By any chance is there any way to assign for example mail to get internet from wifi and the rest of the application use Lan for connection to internet ?

    not sure if I understand you correctly
    but many people use airplay mirror to mirror apps streaming movies and music from the Internet connection the device have
    be it from a internet connection the device is currently airplaying to is of no relevance
    but the device can't get data from both 3g and wifi at the same time
    not even a computer can do that, it use it's metric settings to only! get data from the fastests source

  • Can I use one wireless mouse and keyboard for a MB and a pc?

    Hi,
    I am planning to buy a lcd display which basically has both dvi and vga ports. So, I thought I will plug my pc into the vga and my MB into the DVI and use the same display for both machines. I just need to switch between the source through the display menu in order to switch. Now the problem is I can't seem to fiigure out how to use a single wireless KB and a mouse to run in both systems.
    Anyone has any idea?

    jhawk,
    I can see the appeal of your desired setup, but is the limitation the inability to "Pair" the mouse/keyboard to more than one computer at a time? (Practically, that makes sense, you don't want to be blindly moving both cursors around at the same time, since you can only see one screen at a time)
    You CAN operate bluetooth devices on Windows without pairing-you just need to locate the device each time before using:
    http://www.oreillynet.com/pub/a/wireless/2003/09/18/winxpunwired.html
    So maybe you can pair the Mac version, and just search out the device each time you switch over? (but then you would have to "unpair" it off the Mac too) Maybe you need to write two scripts for each platform: pair/unpair devices.
    Sounds like it would be easier to buy two wireless keyboards and mice :P
    What you really want is a utility like this:
    http://www.abyssoft.com/software/teleport/
    (its only Mac to Mac though, unfortunately)
    Good luck!

  • Can I use simultaneous lightning connection and bluetooth for sound?

    i bought a brooks mini beamer and a bluettot speaker. The speaker can also be connected using a jack. Why do this if there is bluetooth available.
    Unfortunately my Iphone will only direct the sound to either the lightning connector (to the beamer) or to bluetooth speaker (and disconnects even the video send to the beamer).
    any solutions?
    I can plug the jack in the beamer as a plan B though.

    Whether the device supports bluetooth or not has nothing to do with plugging an audio cable in and sending audio to it.
    The iPhone will direct audio where the user instructs it to do so.
    Swipe up from the bottom to bring up Control Panel.
    Select the output option and direct audio where you desire.
    For what silly reason would anyone connect a bluetooth audio transmitter to an iPhone?  They have bluetooth built in.

  • Just purchased a Track Pad. Can I use the track pad and my mouse at the same time?

    Hello folks.  Am new to the community.  Asked a question but didn't go through.
    Have just purchased a magic track pad for my desk top iMac.  I have been using both the track pad and my mouse together.
    It froze up after several hours.  Is it ok to use both together?  I find that fine movements are better on the mouse but the other
    stuff is easier on the track pad.
    Thanks for your help.

    That is very strange..... haven't heard of that one. I guess I'd try the following: unpair them all and start over, one by one. I must say, my current mouse is not an Apple mouse - and it is USB, so it doesn't come into play in this scenario, but it is listed in the bluetooth devices and I do have the keyboard and trackpad.

  • I have 3 different accounts and passwords for Apple. 1 for iTunes, 1 for iCloud, and 1 for my iCloud email. It is annoying to remember these 3 different usernames and passwords. Can I make all 3 accounts the same username and password?

    I would like to use my iCloud email address as the username.
    Is this possible?

    No.  Apple will not merge Apple IDs, and you can't use the same username and password for multiple IDs.

  • Can I use CDMA sim or GSM sim for iPad 2 wifi+3G ?

    Can I use CDMA sim or GSM sim for iPad 2 wifi+3G ?

    Since the CDMA protocol does not use a SIM, I'm going with "in order to use a SIM, you must use the GSM protocol".

  • HT3939 if I purchased iPhone 5 GSM A1429, then I tried to use CDMA SIM card inside the same phone, does it'll work and provide me signals ???

    Hi All,
    Regarding iPhone 5, at the latest model, if I bought an unlocked one from UK Apple Store,  iPhone 5 GSM   A1429, then I tried to use CDMA SIM card inside the same phone, does it'll work and provide me signals or not. ??
    Thanks for your answering.

    The answer is complicated. None of the major carriers offer PAYG service in the US, but if you buy a contract-free phone for full price you can get a plan that can be canceled at any time from any of the major carriers (AT&T, Verizon, Sprint and T-Mobile). There are smaller resellers that offer PAYG service (StraightTalk, for example), but they are hard to deal with.
    The most liberal is the GSM carrier T-Mobile. They have "unbundled" the phone from the service, so if you bring your own phone or pay full price for a phone the monthly cost will be lower.
    The other 3 will charge you the same monthly cost whether you pay full price for the phone or get a subsidized phone.
    Verizon iPhone 5 series phones are unlocked out of the box for international use (thanks to a condition the FCC imposed on Verizon when they were allowed to buy a substantial chunk of spectrum). They are the only phones sold in the US that will work on LTE bands in the UK and Europe.
    Sprint is not a good choice, because they give you a hard time if you want to unlock your phone.
    AT&T phones are locked, but they will unlock the phone if you pay full price or pay off your early termination fee. However, they will only work on GSM in the UK, not on LTE (4G).

  • Does anyone know how to use pages so you can export pdfs from the internet and automatically drag words from the document into the file name of the pdf (i.e., author, title of a scientific paper)

    Does anyone know how to use pages so you can export pdfs from the internet and automatically drag words from the document into the file name of the pdf (i.e., author, title of a scientific paper). For example, if I am downloading a paper by smith called "Surgery" that was published in 2002, it will automatically set the file name in the download to smith- surgery 2002. I have heard pages is smart enough to do this.
    thank you

    Pages can export only its own documents. They may be exported as PDF, MS Word, RTF or Text files.
    Pages can import (ie. Open a file as, or Insert a file into, a Pages document) documents in several formats, but won't rename the document as you describe. Documents that can be Opened (eg. Text, AppleWorks 6 WP, MS Word files) are converted to Pages documents, and retain their original names, with .pages replacing the original file extension. Files that can be Inserted (generally .jpg, .pdf and other image files) become part of the existing Pages file and lose their names.
    It may be possible, using AppleScript, to extract the text you want and to Save a Pages file using that text as the filename, but that would depend in part on being able to identify which text is wanted and which is not.
    How will the script determine where the author's name begins and where it ends?
    How will the script recognize the beginning and of the title, an decide how much of the title to use in the filename?
    How will the script recognize the year of publication?
    For papers published in a specific journal, with a strict format for placing each of these pieces on information, or containing the needed information as searchable meta data in the file, this might be possible. But it would require knowledge of the structure of these files, and would probably handle only papers published in a specific journal or set of journals.
    Outside my field of knowledge, but there are some talented scripters around here who might want to take a closer look.
    Best of luck.
    Regards,
    Barry

  • USB sync cable different for CDMA and GSM version phones?

    I recently ordered a USB sync cable for Iphone 4S from ebay. I want to know whether the USB sync cable for Iphone 4S is different for CDMA and GSM version phones? And if they are then what are the likely consequences if they are interchanged and used inadvertantly.

    All recent iDevices use the same type of connector/cable.
    Stedman

  • Is the blackberry classic unlocked? and can I use it on China Mobile GSM if I visit China?

    Two problems that bother me now. Can I buy an unlocked blackberry classic from Verizon? Can I use it on China Mobile GSM carrier if I could buy?
    thanks

        We certainly hope that you don't need to worry about anything related to Verizon Wireless, wys515. The great news is that all of our LTE global-capable devices, such as the Blackberry Classic, are already unlocked and ready to use with a compatible local SIM without any extra steps from us. If you have an existing Verizon Wireless account for while you're in the U.S., you can make your purchase through http://bit.ly/nD0WuY. Otherwise, you may need to go through the manufacturer directly to purchase a phone without any ties to our services.
    JenniferH_VZW
    Follow us on Twitter www.twitter.com/vzwsupport

Maybe you are looking for