Can I use different colours for the different user accounts in my iCal?

I have my own iCal and one for my boss. I need our appointments to show up in different colours so that I can tell at a glance which are mine and which are his. Currently our appointments show up on the same calendar, on top of each other, and both are coloured red.
Can I change the colour of one of us?

Thanks. If there are other people invited to the appointment it comes up with this
So I don't want to 'move' it or cancel the original appointment. is there another way I can, for example, have my boss's appointments all come up green and mine all come up blue......

Similar Messages

  • In Bte can i use same Product for 2 different process

    in Bte can i use same Product for 2 different process

    hi
    as per i know yes but since there r two type of interface behaviour is defferent .
    For
    Publish & Subscribe interfaces 
    if any event occur in this type both the process can work simultaneously and they will not intervene each other
    whereas in
    Process interfaces
    at an time any one process can be active.
    Reward if usefull
    Cheers
    Snehi

  • Can I use a substitute for the Sample Clock?

    I have three different analog inputs coming from one device (PCI-6221).  Two inputs are running at the same sample rate while the third needs a faster sample rate and a trigger.  I have these seperated as two seperate tasks but my problem is they both use the sample clock.  Can I use a substitute for the sample clock on the third channel?
    I am running LabVIEW 8.2 on Windows XP.
    Thanks in advance for your help.
    Ron Deavers, CLD

    Hi programmindragon,
    I understand you are trying to
    configure your PCI-6221 to sample on multiple channels, while having
    different rates and triggers for the channels. Unfortunately, you can
    only configure one analog input task to run at once and all the channels in
    the task must share the same configurations, including the sample clock
    and trigger. This is due to the fact that all the channels are
    multiplexed to a single amplifier and ADC on the device. Thus, you will
    not be able to configure the two inputs at one rate and use a different
    clock rate and trigger for the third input. Is it possible to sample at the
    maximum rate on all channels and decimate the data that you don't need on the certain
    channels, as well as share the same type of triggering? Hopefully you will be able to run your application with the same configuration across multiple channels, otherwise you may need multiple DAQ devices. Please let me know if you have any further questions related to this issue.
    Regards,
    Daniel S.
    National Instruments

  • HT2542 Hi, I created a new user on mac, Admin but i can't use adobe CS6 while the original user is admin too and all programs are running normal. How can i solve this problem?

    Hi, I created a new user on mac, Admin but I can't use adobe CS6 while the original user is admin too and all programs are running normal. How can I solve this problem?

    Hi Amanda,
    Software applications are usually installed in the Applications folder on the Macintosh HD and are accessible to all users.
    I would advise you to check the Applications folder and see if your software is in there.
    Next step would be to Control Click or Right Click on the application and choose "Get Info" and make sure the permissions are set to "Read & Write" for all users. The article below provides more details:
    Troubleshooting permissions issues in Mac OS X
    http://support.apple.com/kb/ht2963
    You may need to contact Adobe Support if this does not resolve your issue:
    http://helpx.adobe.com/photoshop.html
    Hope this information helps!
    - Judy

  • Can I use multiple iPhones on the same iTunes account? e.g. my wife and I each have iPhones

    can I use multiple iPhones on the same iTunes account? e.g. my wife and I each have iPhones

    Yes, you can have as many devices - iPhones, iPods, iPads - as you like using the same iTunes account.

  • In AppStore.app for some reason when I try to update my apps, it asks for the wrong user account than the one that I am logged in with. This makes me unable to update my apps

    In AppStore.app for some reason when I try to update my apps, it asks for the wrong user account than the one that I am logged in with. This makes me unable to update my apps

    You would have downloaded those apps with the wrong Apple ID then created a new Apple ID which is the on you are on now. This is acting as normal because all content downloaded from the iTunes and App Store is attached to the Apple ID it was downloaded with. To stop this you would delete the apps and redownload them with your current Apple ID you are signed in with.

  • Can you use one PC for 2 different Ipods, with out erasing the others music from Itunes?

    Can you use one PC for different Ipod touch's , with out erasing the other persons Itunes music?

    Yes.  See:
    How to use multiple iPods, iPads, or iPhones with one computer

  • What is the password for the new user account that is set up via Migration Assistant?

    I recently purchased a new Macbook Pro, and used Migration Assistant to download My Documents from a previous PC desktop. The migration was successful, but afterwards the new user account that was set up to house all the new documents became inaccessible to me.
    My administrator's password works for my computer and I am able to log in and out, change settings, etc.
    However, if I try to log in to the new user account, no password works. Through the administrator's account I have also attempted to change the password, and I am allowed to do so, but when I use the new password I set up, it still denies me access.
    Additionally, if I log out the administrator's account and click the new account to log in, it prompts me to make a new password for the account, and whatever I enter is also rejected as "incorrect." (The screen shakes)
    I am very frustrated my inability to access this information I must use to work, and I have no idea what the password might be, or how to change it properly.
    PLEASE HELP COMMUNITY! I have only had my mac for about a week and I have had it up to hear with this "user friendly" system.

    You can change the password from Visual administrator. login to visual administrator, and select services,, under that you will find the system details. change the password.
    even if the visual administrator password is expired then u can go thorugh configtoo.bat and there u can change the password.
    if that even not possible then u need to login to sql and can execute the commands for changing password.
    Regards,
    mahesh

  • How to use migration assistant when the same user account name is on both computers

    I want to migrate all my info from my MacBook to my new (to me) MacBook Pro.  I've already set up a user account on the new MBP that has the same name as the user account on the MacBook that I want to migrate. 

    Snags40 wrote:
    In both cases the UID for my primary User Account is 507
    507?  That's odd; usually the first one created is 501, then 502, etc.  Could you have gone through 6 accounts?
    Since I've migrated thru several Macs to get to the current state on the old MacBook, I suspect the UID has changed.
    That could explain some of it, if you used Migration Assistant instead of Setup Assistant.  It would have taken a lot of migrations and user accounts to get to 507, I'd think.
    I still have the Powerbook that preceded the MacBook.  How can I determine the UID on 10.4.11?  The right click on the Account name in User Accounts doesn't show that value.  I'd like to see if UID has changed going from 10.4 to 10.5.
    Good question.  I skipped Tiger, and don't recall earlier versions, but this article may help:  http://hints.macworld.com/article.php?story=20051022175850619&query=change%252BU ID

  • Reconciliation for the deleted user accounts on Target Resource

    Hi,
    I am trying to run reconciliation on a DB Table as the target resource. It is linking the user accounts that are present in the target resource.
    But for the user accounts that are deleted on the target resource Reconciliation is not showing any action on the IdM user accounts under resource profile. The resource object link still shows the status "Provisioned".
    Ideally when the users are deleted on the target resource User's profile, Does it require any customizations to make the resource assignment status to "revoked" instead of "Provisioned".
    Any response would be of great help.
    Thanks in advance.

    See there could be two possibilities only:
    *1) User Status Recovery via trusted Reconciliation*
    Associated field in OIM responsible for it - Status field of OIM User Profile -> Check Process Definition for Xellerate User or any Trusted resource in "Reconciliation Field Mappings" section
    Valid values are : Active, Disabled and Deleted
    *2) Account Status Recovery via target Reconciliation*
    Associated field in OIM responsible for it - OIM_OBJECT_STATUS field from Process Data Field -> Check Process Definition for Your custom resource of DB App Table in "Reconciliation Field Mappings" section
    Valid values are : Enabled, Disabled and Revoked
    So you are trying to achieve the second part.
    Hope its clear.
    Thanks
    Sunny

  • How can I use create/createInsert for two different tables

    Hi All,
    I am showing different fields in the UI from different tables. I am able to fetch the data from all the tables and able to modify and save the data.
    Now, the problem when I want to create/insert some data into those columns(from different tables) I am facing issues.
    How can I proceed further??

    Hi Shay,
    Thank you very much for your quick response.
    Actually I am totally new in ADF world and I am trying to implement some applications in ADF.
    I created an UI based on some 3 tables(there is foreign key relation between them) and some other tables. I am able to modify and save my application if there is any data in all the tables.
    My Actual issues are
    1) I removed all the data from the tables. There is a submit(CreateInsert) button, what I expected is on click of the button I should see all the fields in editable mode. But I was able to see only few fields and also in readonly mode. So here my issue is how can i create and save these data.
    2) Consider on my landing page I have just CommandLink/CommandButton. After clicking that page I should get the above screen in create mode(I mean to say all fields in editable mode). How can achieve this?
    Thanks & Regards,
    Ravi.

  • To make different colours for the columns of ALV report in Grid display.

    Hai Friends,
                       I have created an ALV report in grid display method by using the call function reuse_alv_grid_display.
    I have obtained the report.In that report i want to change the colour of each column.Plz provide the answer with a sample program.
                    Thank u.

    hi i had a program  for the rows with diff colors....do the same thing for the columns..
    REPORT  zdemo_alvgrid                 .
    TABLES:     ekko.
    type-pools: slis.                                 "ALV Declarations
    *Data Declaration
    TYPES: BEGIN OF t_ekko,
      ebeln TYPE ekpo-ebeln,
      ebelp TYPE ekpo-ebelp,
      statu TYPE ekpo-statu,
      aedat TYPE ekpo-aedat,
      matnr TYPE ekpo-matnr,
      menge TYPE ekpo-menge,
      meins TYPE ekpo-meins,
      netpr TYPE ekpo-netpr,
      peinh TYPE ekpo-peinh,
      line_color(4) type c,     "Used to store row color attributes
    END OF t_ekko.
    DATA: it_ekko TYPE STANDARD TABLE OF t_ekko INITIAL SIZE 0,
          wa_ekko TYPE t_ekko.
    *ALV data declarations
    data: fieldcatalog type slis_t_fieldcat_alv with header line,
          gd_tab_group type slis_t_sp_group_alv,
          gd_layout    type slis_layout_alv,
          gd_repid     like sy-repid.
    *Start-of-selection.
    START-OF-SELECTION.
    perform data_retrieval.
    perform build_fieldcatalog.
    perform build_layout.
    perform display_alv_report.
    *&      Form  BUILD_FIELDCATALOG
          Build Fieldcatalog for ALV Report
    form build_fieldcatalog.
      fieldcatalog-fieldname   = 'EBELN'.
      fieldcatalog-seltext_m   = 'Purchase Order'.
      fieldcatalog-col_pos     = 0.
      fieldcatalog-outputlen   = 10.
      fieldcatalog-emphasize   = 'X'.
      fieldcatalog-key         = 'X'.
      append fieldcatalog to fieldcatalog.
      clear  fieldcatalog.
      fieldcatalog-fieldname   = 'EBELP'.
      fieldcatalog-seltext_m   = 'PO Item'.
      fieldcatalog-col_pos     = 1.
      append fieldcatalog to fieldcatalog.
      clear  fieldcatalog.
      fieldcatalog-fieldname   = 'STATU'.
      fieldcatalog-seltext_m   = 'Status'.
      fieldcatalog-col_pos     = 2.
      append fieldcatalog to fieldcatalog.
      clear  fieldcatalog.
      fieldcatalog-fieldname   = 'AEDAT'.
      fieldcatalog-seltext_m   = 'Item change date'.
      fieldcatalog-col_pos     = 3.
      append fieldcatalog to fieldcatalog.
      clear  fieldcatalog.
      fieldcatalog-fieldname   = 'MATNR'.
      fieldcatalog-seltext_m   = 'Material Number'.
      fieldcatalog-col_pos     = 4.
      append fieldcatalog to fieldcatalog.
      clear  fieldcatalog.
      fieldcatalog-fieldname   = 'MENGE'.
      fieldcatalog-seltext_m   = 'PO quantity'.
      fieldcatalog-col_pos     = 5.
      append fieldcatalog to fieldcatalog.
      clear  fieldcatalog.
      fieldcatalog-fieldname   = 'MEINS'.
      fieldcatalog-seltext_m   = 'Order Unit'.
      fieldcatalog-col_pos     = 6.
      append fieldcatalog to fieldcatalog.
      clear  fieldcatalog.
      fieldcatalog-fieldname   = 'NETPR'.
      fieldcatalog-seltext_m   = 'Net Price'.
      fieldcatalog-col_pos     = 7.
      fieldcatalog-outputlen   = 15.
      fieldcatalog-datatype     = 'CURR'.
      append fieldcatalog to fieldcatalog.
      clear  fieldcatalog.
      fieldcatalog-fieldname   = 'PEINH'.
      fieldcatalog-seltext_m   = 'Price Unit'.
      fieldcatalog-col_pos     = 8.
      append fieldcatalog to fieldcatalog.
      clear  fieldcatalog.
    endform.                    " BUILD_FIELDCATALOG
    *&      Form  BUILD_LAYOUT
          Build layout for ALV grid report
    form build_layout.
      gd_layout-no_input          = 'X'.
      gd_layout-colwidth_optimize = 'X'.
      gd_layout-totals_text       = 'Totals'(201).
    Set layout field for row attributes(i.e. color)
      gd_layout-info_fieldname =      'LINE_COLOR'.
    endform.                    " BUILD_LAYOUT
    *&      Form  DISPLAY_ALV_REPORT
          Display report using ALV grid
    form display_alv_report.
      gd_repid = sy-repid.
      call function 'REUSE_ALV_GRID_DISPLAY'
           exporting
                i_callback_program      = gd_repid
                is_layout               = gd_layout
                it_fieldcat             = fieldcatalog[]
                i_save                  = 'X'
           tables
                t_outtab                = it_ekko
           exceptions
                program_error           = 1
                others                  = 2.
      if sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      endif.
    endform.                    " DISPLAY_ALV_REPORT
    *&      Form  DATA_RETRIEVAL
          Retrieve data form EKPO table and populate itab it_ekko
    form data_retrieval.
    data: ld_color(1) type c.
    select ebeln ebelp statu aedat matnr menge meins netpr peinh
    up to 10 rows
      from ekpo
      into table it_ekko.
    *Populate field with color attributes
    loop at it_ekko into wa_ekko.
      ld_color = ld_color + 1.
    Only 7 colours so need to reset color value
      if ld_color = 8.
        ld_color = 1.
      endif.
      concatenate 'C' ld_color '10' into wa_ekko-line_color.
    wa_ekko-line_color = 'C410'.
      modify it_ekko from wa_ekko.
    endloop.
    endform.                    " DATA_RETRIEVAL
    regards,
    venkat

  • I can't use my fingerprint for the App Store?

    I tried re setting it again but couldn't.
    I also read that i have to change the "Restrictions" to 15 minutes for the password, but i don't have that option available.
    What can I do?

    It isn't clear from your question whether you weren't able to enable Touch ID for the store or if it is not recognizing your fingerprint when you use it. The following link has a section related to Touch ID for the store that may help: http://support.apple.com/kb/HT5883

  • Can I use 2 iPhones with the same iTunes account? help...

    At the moment I have an iPhone 3G but my wife doesn't. I have a Windows Vista machine at home that has all our music in iTunes and all the apps I have downloaded from the app store. We only have 1 login to our windows vista PC that we share, we don't have individual signons.
    On Friday I will be upgrading to the 3Gs and my wife will also be getting one.
    My question is can we sync both iPhones with the same PC using the same Windows login and the same iTunes account, i.e. share all music and apps with both iPhones?
    Thanks

    A computer can sync a dozen iPods and/or iPhones (just saying).
    However, You can't use more than one computer for that iPhone.

  • How to avoid one active session for the same user account concurrently

    Hi all ,
    i am using model 1 architecture in my application.
    in my application ,if one user login through 2 browser at a time ,he can do it.
    But now ,i want to close first browser or redirect him to a exception page.
    plz guide me how can i do it.
    plz include case1.
    what happen if he close page ,not logoff
    case2
    what happen if power cut happen on client side.

    +You can use a column in the table to check the current user logged in status. Once the user gets logged in the application change the flag at the backend. In this way you can know whether the user is already logged in the apllication or not, and based on this you can show a proper message to the user.+
    +If the user closes the browser window without logging off the application, then in this case you can use the session Listoners.+
    Well not the right approach Listeners would it for you.For browser closure problem.If user does that automatically container destroys the session object as per configured session-timeout.
    *@OP*
    Problem 1:
    Try to a write an implementation of sessionListener / sessionAttributeListener (for having a check on user loggins and apply a global filter which checks available users who have already logged in)
    Hope the below thread might give you some idea of how to go about.
    http://forum.java.sun.com/thread.jspa?threadID=5226527&messageID=9922478
    Problem 2:
    consequently configure session-timeout parameter in minutes under web.xml for session browser close and inactivity state problems.
    REGARDS,
    RaHuL

Maybe you are looking for