Can I use Ipod Mini to my TV to see the pictures

I stored some Pictures in my IPod Mini[4GB] and i want to see those photos in MY TV inorder to show to my friends..
actually I purchased for that one purpose only
so can any one tell me how can i see the pictures in TV ..
and what should i need and what should i do?

Yes, you can STORE pictures and/or video files on your mini. That's all you can do with them though - store them. This is so you can move them from your computer to another computer, but while they're on your iPod, there's really nothing you can do with them.
The firmware in the mini simply does not have any capabilities to process the files to output to a tv.
The iPods with color displays are able to display photos (not video) on a tv, but not the mini or any iPod without a color display.

Similar Messages

  • Can I use Ipod mini charger for Ipod Video?

    Is it safe to use the USB charger supplied with IPOD Mini to charge my new 30GB Ipod video ?

    absolutely.

  • Can I use ipod touch 5th to mirror my screen on Apple TV via Airplay with out wifi connection?

    Can I use ipod touch 5th to mirror my screen on Apple TV via Airplay with out wifi connection?

    Welcome to the Apple Community.
    Peer-to-peer AirPlay
    With peer-to-peer AirPlay, your iOS device and Apple TV don't need to be on the same Wi-Fi network. If you have one of these products, you can use peer-to-peer AirPlay:
    * iPhone 5 or later, iPad (3rd generation or later), iPad mini, or iPod touch (5th generation) using iOS 8 or later.
    * Apple TV (3rd generation rev A, model A1469 or later) with Apple TV software 7.0 or later. Find out which Apple TV model you have.
    To use peer-to-peer AirPlay, your iOS device needs to have both Wi-Fi and Bluetooth turned on.

  • Can I use a mini CD-R in my PowerBook CD Drive?

    Can I use a mini CD-R in my PowerBook cd drive? I wanted to transfer some photo's to the Sony Mini CD-R that came with a PSP to then put on the PSP.
    But the Mini CD-R is so small I'm afraid to try to slide it into the PowerBook cd slot and not get it out.
    Thanks

    Can I use a mini CD-R in my PowerBook cd drive?
    No.
    ... the Mini CD-R is so small I'm afraid to try to slide it into the PowerBook cd slot and not get it out.
    That's exactly what can happen.
    Apple says don't do it.

  • Can I use a mini display port to VGA adapter and then a VGA to av adapter to connect my MacBook pro to my standard definition tv?

    Can I use a mini display port to VGA adapter and then a VGA to av adapter to connect my MacBook pro to my standard definition tv?

    No. You need a converter box like this to go with your MDP-VGA adapter:
    http://www.amazon.com/PC-To-TV-Video-Converter/dp/B001CJOLBW/ref=pd_cp_e_2

  • Please help! We got a used Mac Mini and we don't have the former owner's password, so we can't install anything like flash player.  Does anyone know how to get around this?

    Please help! We got a used Mac Mini and we don't have the former owner's password, so we can't install anything like flash player.  Does anyone know how to get around this? I don't know how to wipe the hard drive, and the support online doesn't seem to work.

    As posted previously:
    Reinstall OS X without erasing the drive
    Do the following:
    1. Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. If the drive is OK then quit DU and return to the installer.  Proceed with reinstalling OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
    If installing Leopard the process is similar in some respects.  If you wish to begin anew then after selecting the target disk click on the Options button and select the Erase and Install option then click on the OK button.  To install over an existing system do the following:
    How to Perform an Archive and Install
    An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
    1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
    Repairing the Hard Drive and Permissions
    Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
    3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
    4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
    5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
    6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update.

  • Can i use my mini Mbox 2 with logic pro 9 on iMac os x lion?

    Can i use my mini Mbox 2 with logic pro 9 on iMac os x lion?

    Hi there,
    Did you find out anything more in regard to this?
    I have been using Pro Tools 8 with the MBox 2 connected to my iMac operating Leopard. It worked a treat for nearly four years.
    However the hardrive has just been replaced on the iMac which now has Snowleopard.  I don't want to have to update to Lion and then fork out £500 for Pro Tools 10. 
    I would be content to get Logic Pro 9 if I can attach the MBox 2 to it.
    Your advice would be appreciated
    PXC

  • Using ipod mini in a bike

    Is possible to use ipod mini fixing it in a mountain bike. I will make a mountain route in holidays and i want to carry ipod mini together with a mini speakers in front of my bike. Any problem with the vibrations?
    Thanks and sorry for my bad english.

    I don't know about the operating range of the iPod but I doubt fixing it to a mountain bike would do it any good.
    Best to have it loosely but securely attached so it doesn't get knocked but any vibration would be absorbed. a good protective case for the iPod should do the trick then have that housed in a carrier on the bike. With the cables for the speakers coming out of it.
    Mark

  • Can I use iPod on both Mac & PC?

    Can I use iPod on both Mac & PC?

    If your iPod is formatted for Mac it won't run natively on a PC because the Windows OS does not support the HFS Plus file system and therefore will not see the drive. Macs can read Windows drives so you could restore and format the iPod on a PC, this would also mean any future software updates would have to be done on Windows. Strictly speaking using a Windows formatted iPod on a Mac isn't supported however many people use one without any issue. iTunes will allow you to use an iPod formatted for Windows on a Mac; however Apple currently only supports using the iPod shuffle in FAT32 format on Mac. Alternatively there are third party programs that will allow you to use a Mac formatted iPod on Windows, this is one for instance gets good reviews: XPlay 2
    You can read another user's experience of using XPlay at this link: iPod on Mac and Windows

  • Can I use ipad mini in Brasil???

    hi can i use ipad mini in brasil?

    Why can't he use a 3G connection? iPads work worldwide. All he needs for 3G is a local sim card and an iPad data plan from a local provider.

  • Can i use ipad mini wifi cellular in Bangladesh?

    can i use ipad mini wifi + cellular in Bangladesh?

    WiFi works wherever you can find a WiFi Access Point/Router and you know the connection passcode, or it is an open wifi.
    Cellular will work if you sign up for a local iPad data plan and sim card.

  • My iPod said "Can not use iPod until cools down". I let it sit over night and now it wont charge.

    So last night My ipod brought up a "Can not use ipod til it cools down" message. Than I turned it off for the night and It wont charge. Is there something wromg with my iPod?

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar              
    However, I suspect a hardware problem and the Apple store will likely be necessary.

  • Where can I find ipod updater so iTunes 10 will see my scrollwheel 10G ipod?

    Where can I find ipod updater so iTunes 10 will see my scrollwheel 10G ipod?
    I used it exclusively on an old iBook. (POS from the beginning - bad motherboard, replaced, went bad just out of warranty. So I use it for only certain things.)
    Now I want to load the scrollwheel ipod (also POS, bad motherboard where the headphones plug in, can't be repaired) from my iTunes 10 machine.
    iTunes 10 does not see the ipod with it's 1.2.6 software.   iTunes 7.5 sees it but will no longer update itself or the ipod.
    - my sig:  Whatever we're talking about, please don't tell me to buy a new one unless you're willing to pay for it.  Thanks.

    A "scrollwheel 10G" (10 GB) iPod may be 3rd gen...  If it's a 3rd gen iPod, the one with a "scrollwheel" and four "touch" buttons in a row between the screen and wheel (that glow orange), it will only work properly with a FireWire connection.  Although it has a dock connector, it does not charge over a USB connection.  If you Mac has a FireWire 800 port, you can use an adapter to connect to the old FireWire (400) docking cable.
    Mine still works perfectly (it's had a few battery replacements) with the latest iTunes and Mac OS X 10.7.4.  I think it has great sound...

  • Connect two external monitors to mini DP(using a mini DP to VGA adapter) and the VGA out at once

    I am trying to  connect two external monitors to mini DP(using a mini DP to VGA adapter) and the VGA out at once. Windows recognize both monitors as well. But it dowsn't let me use all three monitors at once(see the below image). In the dropdown, it lists all three monitors. Problem is there are two active displays I can select.

    Mavec wrote:
    I would like to add a third monitor.  
    The GPU(s) in your T400 (and most other laptop brands) will support two different displays concurrently.  If you want to support more than two different displays concurrently, you will need another GPU external to the T400.
    Generally, if you want to use two external displays on a T400 you will nee dto use a docking station.
    I have read messages on various fora on this topic and know that there are a number of ways of doing this, but as I have never had a need to do this myself I can't tell you how to go about it.
    Cheers,
    Bill
    I don't work for Lenovo

  • Can I use iphone 4s USB cable to recharge for the new ipad

    Can I use iphone 4s USB cable to recharge for the new ipad

    The iPod, iPad & iPhone cables are identical, however, the chargers are not.
    The quickest way (and really the only way) to charge your iPad is with the included 10W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
    Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
    How to Calibrate Your Mac, iPhone, or iPad Battery
    http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
    At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
    Also, if you have a 3rd generation iPad, look at
    Apple: iPad Battery Nothing to Get Charged Up About
    http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
    Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
    http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
    New iPad Takes Much Longer to Charge Than iPad 2
    http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
    Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
    Extend iPad Battery Life (Look at pjl123 comment)
    https://discussions.apple.com/thread/3921324?tstart=30
    New iPad Slow to Recharge, Barely Charges During Use
    http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
    Tips About Charging for New iPad 3
    http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
    Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
    http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
     Cheers, Tom

Maybe you are looking for