Can I use Keynote for Ipad with my PC?

Unfortunately, this is not true either. For some reason, when you export to PDF, and open the PDF on a PC, it often says it cannot read the font and you get a PDF that looks like it's very sick.
I'm not sure exactly how PDF works, but I don't know why it needs to be able to read a font correctly? I thought PDFs were readable on anything because it basically printed the document on a page, which is why you cannot edit it.

Similar Messages

On iOS 8.3 using 'Keynote for iPad' the app freezes repeatedly (since the last update of April 21st) while editing slides. 30 sec. later comes alive again, then freezes again after a few editing actions. Anyone with the same problem?

On iOS 8.3 using 'Keynote for iPad' the app freezes repeatedly (since the last update of April 21st) while editing slides. 30 sec. later comes alive again, then freezes again after a few editing actions. Anyone with the same problem? I tried everything 'app support' tells me except deleting and reinstalling the App because I have a lot of files that I'd lose. Recommendations anyone? [email protected]

On iOS 8.3 using 'Keynote for iPad' the app freezes repeatedly (since the last update of April 21st) while editing slides. 30 sec. later comes alive again, then freezes again after a few editing actions. Anyone with the same problem? I tried everything 'app support' tells me except deleting and reinstalling the App because I have a lot of files that I'd lose. Recommendations anyone? [email protected]

Can i use someone else iPad with my apple id

Can i use someone elses ipad with my apple id and download items?

That should not be a problem if you wish to use other's apple id for your IOS device.
However, if in the future you need to update the apps, which is needed to be done from time to time, you need to have the password of that person's apple id as well.
It is better to have your own apple id for convenience.

Can I use iMessage for free with someone in a different country?

Can I use iMessage for free with someone in a different country?

Suzanne515 wrote:
dj,
That is good to know. Have you ever turned off wi-fi and used your cellular data instead? I'd like to know if your carrier charges you for the iMessage? I will be travelling with a +44 number on my sim card (Teletial based in the Channel Islands I believe) and some places like South Korea & Japan charge about $30USD/MB. ( or 19 GBP/MB). The devil is in the detail.
My carrier, 3, does not charge extra for cellular data. I pay £34 per month for a cellular plan with unlimited data. So, no, I do not get charged for sending iMessages whether I am on cellular data or wifi. If I were to try to send an iMessage to an international number that did not belong to an Apple device, it would send as SMS and I am sure that standard international rates would apply. Apple iMessage is a different protocol for users with an AppleID. There is no way for the carrier to distinguish it from any other data traffic.

Can I use Safari for G3 (with OS 9.2)

I wanted to know - can I use Safari for G3 (with OS 9.2)
If, yes.....where can I download....
if somebody can help me....pls email to...
[email protected]
thanks

Hi
Welcome to Apple Discussions
Adding to Klaus' comment, have a look at this article for browser options for OS 9.2.

Im going in europe , can i use my canadian ipad with an adaptor for the 220

i'm going to Spain tonight
i bought an adaptor to the 220
can i use my ipad on it
my ipad is on 110 volts

Electrically there is no problem at all. If you can read the printing on the charger (good luck!), you'll see that it works with 100-240V, 50/60Hz. However, you will probably need a mechanical adapter so that the prongs fit into the receptacle.Apple has a travel kit that's ideal but there may also be less expensive solutions.

I am using keynote for iPad. Can somebody guide me on how to create 3d graphs ?

Can somebody guide me on how to create 3d graphs in keynote on iPad ?
Sn

I tried. I think 3 d charts are not available in keynote version on iPad. Is this correct ?
SN

How can i use autoSuggestBehavior for inputText witha separator

I use JDEVADF_11.1.1.2.0
how can i use a input Text Field with auto suggest by sepearted
in a field with what, is separated
Example Value :"Name1;Name2;Name3......"
Sorry for my English

I'm not exactly sure what do you mean here.
The basics of working with autosuggest are here:
http://www.connotea.org/user/jdeveloper/tag/auto%20suggest

Why i can not use whatsapp in ipad with cellular

i want to use whatsapp in ipad mini cellular, any body can help me

Simply because whatsapp doesn't support iPad. And never it will....

How do I use Garageband for iPad with a real amp?

I play with a guy down the street who has a couple of amps set up. The one I use is kind of limited in it's tonal qualities. In my twenties and thirties I would have no problem hauling my own amp down there to get my tones dialed in, but I'm forty freakin' seven and too old for that! When I have tried to plug the iPad into my amp at home, I get terrible feedback. I used to have a Rockman (remember those?) and I could take it with me and plug into any guitar amp set to clean and be good to go, how do I do that with my iPad and Garageband?
I'm using a no name "y" cord with the 1/8" three ringed input into the ipad and a 1/8 stereo and 1/4 inch outputs-all sounds great on headphones, and with computer speakers, but need to plug into a real guitar amp.
I am using a 50 watt Yamaha to test and am having no luck at all. I know it has to do with impedance, but I am not very versed in how to get around it.
Thanks in advance!

Okay, after fiddling around some more, I’m able to get–some-settings to work. 1) set the real amp to clean settings (duh). Keep the volume on the low side (double duh). 2) stick to the smaller amps from the “clean and “processed” groups ofpresets.
The only way (so far) I’ve found to get some crunch is by turning the gain up on the GB amp you’re using,but only to a point, then I got feedback again.
Also, my “y” cord does have a name, it’s a GriffinTechnologies GuitarConnect Cable. I haven’t tried any of the other devices, so I can’t say if the feedbackwould be less irksome on other devices, but I kind of doubt it.

How can i use labview for communicating with pic18 microcontroller through usb port?

Hi all,
I want to make a DAQ card using pic 18 microcontroller which has a built-in usb protocol. I have the firmware of this
controller which will make it as a usb device. How can i receive the analog voltages from this DAQ card in Labview? or i mean to say that how i can communicate labview with the Pic 18 microcontroller through usb port? I have also the
mpusbapi.dll file which is for Visual C++. Can i make changes in this dll file to make it compatible with labview?

Which labview version do you have. Up to labview 7.1 it was no USB raw communication options. I have heard it did not work well in 7.1, but from 8.x most of the errors were fixed.
Here is a link it should be useful http://forums.ni.com/ni/board/message?board.id=170&message.id=340676&query.id=365864#M340676
Besides which, my opinion is that Express VIs Carthage must be destroyed deleted
(Sorry no Labview "brag list" so far)

Can I use OCX for VB with Dev6

Hi
I am form 4.5 developer. I've never used dev 6.
I am just wondering that I can use OCX with Dev6 which is
specially developed for visual basic.
Hamid
null

Unfortunately, this is not true either. For some reason, when you export to PDF, and open the PDF on a PC, it often says it cannot read the font and you get a PDF that looks like it's very sick.
I'm not sure exactly how PDF works, but I don't know why it needs to be able to read a font correctly? I thought PDFs were readable on anything because it basically printed the document on a page, which is why you cannot edit it.

How Can I Use Bluetooth For Sharing With iPhones?

Hello, i have an iPod touch 3rd Gen. 32GB, And I'm Wondering How Could I Share Music or Photos With My Cousin's iPhone (Jailbroken iPhone), When I Turn The Bluetooth On, Nothing Shows Up On My iPod Or On Here iPhone,
So How Could I Share Things With Her I Have ''File Share'' And ''Bump'' Apps
So what should I Do???

You can't share music over air or by Bluetooth because of several reasons of which is understandable by apple. Apple doesn’t provide any way for you to copy files from your iPod back to your Mac/ between iPods or iPhones. While there are legitimate reasons for blocking bi-directional copying— which again the word music piracy comes to the mind
The only thing that I heard that you could share with iPhone to iPhone/ iPod touch is photos&contacts an app called "bump" and "Bluetooth photo share". With those applications you and your friend can share photos/phone contacts and other kind of files.
"Bump" application link below:
http://ax.itunes.apple.com/us/app/bump/id305479724?mt=8&partnerId=30&siteID=Tjuc Fgl1Woc
"Bluetooth photo share" application link below:
http://ax.itunes.apple.com/us/app/bluetooth-photo-share/id326109583?mt=8&partner Id=30&siteID=TjucFgl1Woc
Message was edited by: John-macOwner

HT204387 can I use pair my iPad with an Epson printer that has built in Bluetooth?

I have an Epson Workforce 615 Multifunction printer with Bluetooth built in, is it possible to pair with my New iPad? It isn't found during the search.

iOS AirPrint Printers http://support.apple.com/kb/HT4356
How to Print from Your iPad: Summary of Printer and Printing Options
http://ipadacademy.com/2012/03/how-to-print-from-your-ipad-summary-of-printer-an d-printing-options
Print from iPad / iPhone without AirPrint
http://ipadhelp.com/ipad-help/print-from-ipad-iphone-without-airprint/
How to Enable AirPrint on a Mac and Use Any Printer
http://ipadhelp.com/ipad-help/how-to-use-airprint-with-any-printer/
 Cheers, Tom

Can't use Mail for Exchange With E71

I downloaded MFE for My nokia E71, and as i am using Microsoft Exchangelabs.com as my exchange server. unfortunately MFE is not working, i mailed a couple of MS technical support and the final remark was
(the implementation of the Exchange ActiveSync is not compatible with Exchange Labs. For example, E71 may not support wild card certificate (*.exchangelabs.com) Exchange Labs uses for ActiveSync.)
I installed Roadsync to check on the exchangelabs.com service, It works smothly. However I would prefer to Use MFE. Could any one help me on this issue.

After playing around for a while, I'm now able to get my exchange mails working.
The issue was:
I installed MfE by using my phone browser which was working synced but didn't give me the icon to check my mails.
Solution to this particular issue is:
Un installed the MfE which i previously downloaded.
I downloaded MfE from Nokia web site and used Nokia PC Suite to install in on my phone.
Re created the profile
Synced it.
and I was able to see the Mail for exchange icon to check my mails.

Can I use Keynote for Ipad with my PC?

Similar Messages

Maybe you are looking for