Can I use Logic Pro 9.1.6 on two computers with one licens

I have download and install Logic Pro 9.1.6 on my MacBookPro 13". I record on location with my MacBook an wil edit and arrange the music on my iMac at home. Can I use Logic Pro 9.1.6 on two computers with one licens. I'm the owner of both computers. If it can where can I find the program on my MacBook? and how to install and register?

Hi, is  the iMac also 10.6.8? I had an iMac die when 10.6.8 was installed, it worked at first but after some You Tube flash videos the screen just locked and no mouse clicking anywhere did anything. It turned out that most older iMacs [ mine was from august 2007] have a graghics chipset that can't handle Snow Leopard, there were [are?] 77 pages on this "locked screen"topic in the Snow Leopard forum. I checked out a web site that tells you how much your mac is worth by filling in the sereal number-mine was worth only $168, I may give it to a friend for his children to play with, although that seems unholy. I doubt anyone woud buy it,the problem is now so well known that even Apple certified resellars here in the Netherlands refuse to repair them,they claim Apple will revoke their certification if they replace the faulty Graphics unit,it is also VERY hard to get to that unit in an iMac, everything is so tightly packed inside.
If your iMac is running Mountain Lion[10.8.0] you may have to change the app store preference to accept apps from all sites,normally ML will only allow app store apps to be downloaded.

Similar Messages

  • "Can I use Logic Pro in my new imac with 2.66 intel core 2 duo"

    Can I use Logic Pro in my new imac with 2.66 intel core 2 duo? With the new leopard operating system?
    I have a 002 rack from digidesign, that should be good running with a logic pro 8 DAW.

    Can I use Logic Pro in my new imac with 2.66 intel core 2 duo? With the new leopard operating system?
    Yes. Click here for more information.
    (40435)

  • Hello! Can i use logic pro x with mbox 2 ?

    Hello! Can i use logic pro x with mbox ?

    Yes, I´m quite sure you can, go here:
    http://avid.force.com/pkb/articles/download/Mbox-2-Drivers
    Haven't fully tested it myself, but have a go.

  • How can I use a firewire hard drive on a new Macbook with one USB-C only?

    How can I use a firewire hard drive on a new MacBook with only one USB-C?

    kaz-k is correct about FireWire not being supported by any possible connector or adaptor to USB-C and never will.  However, there is no such thing as a FireWire Hard Drive.  There are only SATA (or if it is a really old one, ATA,) drives in a FireWire enclosure.  If you can remove the drive from the case/enclosure - bust it open somehow if it is a glued-up unit - then the drive can be placed into a regular USB3 enclosure. Then it can connect to the new MacBook via any one of the adaptors Apple sells.

  • Can i use Logic Pro with Macbook?

    My Macbook is 2GHz Intel Core Duo with 1 GB 667 MHz DDR2 SDRAM... Can i use the Logic Pro 8?

    But it works with 1 GB of Ram? To buy new memory for this computer here in Brazil is very hard and expense... Thank you!

  • Can I use logic Pro 9 on both my laptop and my i Mac?

    I have iMac 24 for use at home and just bought a mac book pro laptop. Can I use the same program on both computers? One for remote recording and one in my studio at home? Thanks!

    If you are talking about the App Store version of Logic Pro 9...
    You can actually install Logic on any number of Macs you own so long as you use the same Apple ID and Password to download them via the App Store. Just look under the Purchased tab to find the download button.

  • Have just upgraded to Lion and can't use Logic pro 9 .1.5 or Mainstage.Keep getting message : L P 9 app cannot be used on this computer.Also can't reinstall from DVD.Any idea's.

    Have just upgraded to Lion and can no longer use some apps namely Logic pro 9.1.5 and Mainstage ,Also can't reinstall them from DVD ,any idea's.Plus also locked out of Terminal by Administrater{Me}.

    Maybe the real Logic cracks in the Logic Studio Forum https://discussions.apple.com/community/professional_applications/logic_studio can answer/help.
    Stefan

  • Can I run logic pro 8 on a mac in conjunction with a PC?

    Im usig logic pro 8 on Mac but I want to use sounds from a synth that only runs on a PC.
    Any suggestions what I can use to sync the programs together on both Pc and Mac?
    I thought I had heard about a Steinberg program that could do that..
    Thanks
    Message was edited by: Thomas Colontonio

    Steinberg makes a program called VST-Stack that allows up to 16 VST instruments loaded into a rack, each addressed by a separate MIDI channel. It ships with FX racks, compressors/reverbs...etc. Similar to Cubase without the sequencer part.
    If you have a PC with a MIDI interface VST-Stack would work.
    Caveat: It doesn't have MIDI clock sync so don't expect to get delay sync or other synth time based effects/sample&hold to sync to your tempo. As far as a basic synth rack, it works great. Don't know if it runs on Vista, it does run on XP.
    There may be similar free programs but i don't know of any offhand.
    pancenter-

  • Can Quicktime Pro be used on two computers with one registration code?

    I'm asking this on behalf of a friend who uses Windows. If you buy Quicktime Pro, can you put it on two computers? Because she might buy a new computer soon and she wants to know if she would have to buy it twice or not. Thanks
    .....Sorry if this has an obvious answer or if it's been asked before, but I've searched and couldn't find anything

    While the license is only good on one computer at a time you can delete the Quicktime preferences file on the first (removing the registraion on that machine) and install on a second machine. Of course, that is only if you are installing the same version of QT on the machines. The key will be good for any updates of a given version number but will not work with any subsequent whole version number release.

  • Can I use two computers with one ipod?

    I would like to take my playlist with me to work on my ipod and put it onto my work computer. Can one ipod be used with two computers? I took my apple CD to work and tried it and it didn't work. Actually, I had to bring my shuffle home and restore it. any thoughts?
    thanks,...

    Using iPod with Multiple Computers

  • Can I run Muse on two computers with one subscription?

    I have a Muse subscription on my desktop but occasionally need to acces it with my lap top. Is it possible to use both machines with one subscription?

    Alwheaton,
    You can use the following links to download the latest version of Adobe Muse on  your Laptop/Desktop :
    Windows : http://www.adobe.com/go/muse_latest_win
    Mac : http://www.adobe.com/go/muse_latest_mac
    And when it asks you to use it as trial version or a Subscription, just select Subscription and use your Adobe Id and Password (using which you purchased the subscription) when asked.
    Hope this helps.
    Regards,
    Sachin

  • Can I use Logic Pro 9 Sound Libraries with LPX or do I need to download them all anew?

    I have LP9 installed on my system. Does LPX use the same sound files, or must I download them all again?

    Yes you can - maybe.
    These are all free to use, as clearly stated in section 2.C of the iLife Software License Agreement:
    “You may use the Apple and third party audio content (“Audio Content”) contained in or otherwise included with the Apple software, on a royalty-free basis, to create your own original soundtracks for your video and audio projects. You may broadcast and/or distribute your own soundtracks that were created using the Audio Content, however, individual samples, sound sets, or audio content may not be commercially or otherwise distributed on a standalone basis, nor may they be repackaged in whole or in part as audio samples, sound files, sound effects or music beds.”
    http://images.apple.com/legal/sla/docs/ilife09.pdf
    You may need to contact Apple Legal:
    http://www.apple.com/legal

  • I have CS6 on my computer and I want to add it to my husband's computer - I can put it on two computers with one license yes?

    Can I add photoshop to a 2nd computer?

    Hi Jenni,
    You can use the same license on two of your own machines but make sure not to use it at the same time.
    Cheers,
    Kartikay Sharma

  • Can't receive emails on two computers with one account

    Hello,i am using gmail account on 2 computers and when i receive any email and open, the other computer cant receive the same email?

    Well, POP's default behaviour is to download messages to the client that asks for them, then delete them from the server. You must either set your two Thunderbirds to leave a copy on the server, or better, IMHO, switch to using IMAP, which is much better suited to managing email via multiple devices.
    A danger with POP and leaving messages on the server is that if you're not careful, they pile up and your mailbox will become full. You need to arrange to periodically delete older messages.
    To switch to IMAP, go to the gmail settings page in your browser and enable IMAP. Now set up each account again, using IMAP. When it's set up, and you have rescued any messages you want to keep from the old POP account folders, you can delete the POP account in Thunderbird.

  • How can I order OS X v10.7 Lion for two computers? One Macbook and one Imac.

    How can I order OS X v10.7 Lion for both my MacBookPro and my Imac?

    Install 10.6.8 on one computer to access the App Store, purchase, and download Lion. You can install on all the computers you own. Although you can re-download Lion after you purchase it, you may prefer the following:
    Make Your Own Lion Installer
    1. After downloading Lion you must first save the Install Mac OS X Lion application. After Lion downloads DO NOT click on the Install button. Go to your Applications folder and make a copy of the Lion installer. Move the copy into your Downloads folder. Now you can click on the Install button. You must do this because the installer deletes itself automatically when it finishes installing Lion.
    2. Get a USB flash drive that is at least 8 GBs. Prep this flash drive as follows:
    Open Disk Utility in your Utilities folder.
    After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area.  If it does not say "Verified" then the drive is failing or has failed and will need replacing.  SMART info will not be reported  on external drives. Otherwise, click on the Partition tab in the DU main window.
    Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
    Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
    Click on the Erase button. The format process can take up to several hours depending upon the drive size.
    3. Locate the saved Lion installer in your Downloads folder. CTRL- or RIGHT-click on the installer and select Show Package Contents from the contextual menu. Double-click on the Contents folder to open it. Double-click on the SharedSupport folder. In this folder you will see a disc image named InstallESD.dmg.
    4. Plug in your freshly prepared USB flash drive. You are going to clone the InstallESD.dmg disc image to the flash drive as follows:
    Open Disk Utility.
    Select the USB flash drive from the left side list.
    Click on the Restore tab in the DU main window.
    Check the box labeled Erase destination.
    Select the USB flash drive volume from the left side list and drag it to the Destination entry field.
    Drag the InstallESD.dmg disc image file into the Source entry field.
    Double-check you got it right, then click on the Restore button.
    When the clone is completed you have a fully bootable Lion installer that  you can use without having to re-download Lion.

Maybe you are looking for

  • HP Probook 6450b Memory upgrade issue

    Hi All, I appear to be having a strange issue trying to upgrade the memory in a HP 6450b probook (i5-480m & ATI card). The laptop came with 2gb of p/n sps 598856-002 which is 1333mhz 1.5v ram with the manufacturer being ramaxel. I ordered and fitted

  • ITunes Can Be Installed On 5 Devices - Why The Chaos When Reinstalling?

    This comes to light on the very rare occasions I have to replace a hard drive, which unfortunately just occurred.  So obviously i had to reinstall everything, as I hadn't managed to clone the old drive before it failed. I know that iTunes can be inst

  • Access a component in an mxml file from a different mxml file

    Hi, I want to access a component in an mxml file 1 such as this one  <mx:Image id="img" width="101" height="200" source="{product.image}"/> using the id from the actionscript function from a different mxml file 2 public function init():void        HE

  • How to create new row in Adf uix table

    hi, I am using Jdev 10.1.2 , Can any body tell me how to insert new row in table ? Thanx

  • Freezing and flickering of the screen on a T41

    Hello I bought a used T41 about a year ago, and changed its hard drive from a standard 40 gb to a 120 gb one (dual boot WinXP/Ubuntu, did not use the recovery console to reinstall windows, rather used my own copy and downloaded the drivers from the L