"Can I use Logic Pro in my new imac with 2.66 intel core 2 duo"

Can I use Logic Pro in my new imac with 2.66 intel core 2 duo? With the new leopard operating system?
I have a 002 rack from digidesign, that should be good running with a logic pro 8 DAW.

Can I use Logic Pro in my new imac with 2.66 intel core 2 duo? With the new leopard operating system?
Yes. Click here for more information.
(40435)

Similar Messages

  • How can I use Aperture 3 on my new iMac with Maverick?

    How can I use Aperture 3 on my new iMac with Maverick?

    Do you own a copy of Aperture, perhaps bought for another Mac?
    If you have not bought Aperture, you need to buy it from the AppStore.
    But if you own Aperture and have it bought from the AppStore on another Mac, sign into theAppStore on your new iMac with the same AppleID you used to buy Aperure on your other Mac.  Then look at the "Purchased" tab of he AppStore. It show Aperture, with the "Install" button to the right. Simply press the "Install" button and download it to your new iMac.  Or if you have bought Aperture on a CD/DVD, run the installer from the CD/DVD on your new mac and immediately run software update to upgrade the Aperture 3. version to version that will run with Mavericks.
    Léonie

  • Why am I getting distortion from my audio interface while using Logic 9 on my new iMac with Maverick?

    I have been recording using a line 6 UX2 interface and also, a Focusrite iTrack Solo interface, successfully with Logic 9 on my 2007 MBP for a few years now.  I recently bought a new iMac and migrated my time machinre back up to the iMac.  Since then I have had to maunually replace missing sound and room evironment files, and now I cannot get a clean mic recording using either interface or either of my two mics.
    Any suggestions?
    Perplexed in NYC

    I assume you have an iMac with a fusion drive? If so, contact Apple. Audio dropouts on these machines even occur in iTunes.

  • Can I use Logic Pro 9.1.6 on two computers with one licens

    I have download and install Logic Pro 9.1.6 on my MacBookPro 13". I record on location with my MacBook an wil edit and arrange the music on my iMac at home. Can I use Logic Pro 9.1.6 on two computers with one licens. I'm the owner of both computers. If it can where can I find the program on my MacBook? and how to install and register?

    Hi, is  the iMac also 10.6.8? I had an iMac die when 10.6.8 was installed, it worked at first but after some You Tube flash videos the screen just locked and no mouse clicking anywhere did anything. It turned out that most older iMacs [ mine was from august 2007] have a graghics chipset that can't handle Snow Leopard, there were [are?] 77 pages on this "locked screen"topic in the Snow Leopard forum. I checked out a web site that tells you how much your mac is worth by filling in the sereal number-mine was worth only $168, I may give it to a friend for his children to play with, although that seems unholy. I doubt anyone woud buy it,the problem is now so well known that even Apple certified resellars here in the Netherlands refuse to repair them,they claim Apple will revoke their certification if they replace the faulty Graphics unit,it is also VERY hard to get to that unit in an iMac, everything is so tightly packed inside.
    If your iMac is running Mountain Lion[10.8.0] you may have to change the app store preference to accept apps from all sites,normally ML will only allow app store apps to be downloaded.

  • Hello! Can i use logic pro x with mbox 2 ?

    Hello! Can i use logic pro x with mbox ?

    Yes, I´m quite sure you can, go here:
    http://avid.force.com/pkb/articles/download/Mbox-2-Drivers
    Haven't fully tested it myself, but have a go.

  • How can I reset Logic Pro 9 in my iMac 'cos i eraser some presets effects in  mastering list? I need to use again.

    How can I reset Logic Pro 9 in my iMac 'cos i eraser some presets effects in  mastering list? I need to use again.

    You can't, I think. But you can open an old project where it was used, or if you know somebody else with logic, you can ask a copy of the presets and then manually drop them where they belong. What is missing exactly and how did you erase the presets?
    Have a nice day!

  • I have a macbook pro can can log into a server, but my new iMac with lion can't even see the server--both are over wifi- how do i get the new iMac to see the server?

    i have a macbook pro can can log into a server, but my new iMac with lion can't even see the server--both are over wifi- how do i get the new iMac to see the server?

    Without knowing what you have tried please open System Preferences - Sharing - File Sharing and select File Sharing. If you still have trouble you can call AppleCare in the morning when they re-open. You have 90 days of telephone support if you haven't already bought AppleCare.

  • Can i use my iphone 3 in new zealand with a nz sim card without it needing to be unlocked?

    can i use my iphone 3 in new zealand with a nz sim card in it without it needing to be unlocked?

    That depends... its is ALREADY unlocked? If so, then you should be fine.  If the phone is carrier locked, then no, obviously you can't use it with a SIM from another carrier without getting it unlocked first.

  • My Macbook Pro with 2.16GHz Intel Core Duo (Mac OS X v10.4 Tiger) can convert to Lion?

    my Macbook Pro with 2.16GHz Intel Core Duo (Mac OS X v10.4 Tiger) can convert to Lion?
    Toyoo

    These are some of the most common Questions (Q) and Answers (A) about Lion:
    Q: What are the system requirements of the Lion upgrade?
    A: Core2Duo, Core i3, i5, i7, and Xeon Intel CPUs with 2 GB of RAM in a Macintosh computer with 2 GB of RAM, and 4 GB (7 GB after installed) for downloading from the Mac App Store (Available in 10.6.6 and later). Unofficially, past upgrades have arbitrarily also required an additional 15% of the hard drive to be free for data.
    Q: What applications are compatible with Lion?
    A: http://roaringapps.com/apps:table provides a nice third party editable listing for people to include the compatible applications. Many of these compatibility entries came from before Lion's release. Please verify they are correct now that it has been released, and help edit it for more accurate data. Be sure to include any update version of Lion post release that you have found is or is not compatible with it, for the help of others who may be upgrading to Lion the first time. Additionally, as it was released, there is no Rosetta. This means any application that is stated to be PowerPC in the System Profiler, will not work with Lion, and needs a comparable application or upgrade to be compatible. The System Profiler is in Apple menu -> About This Mac -> More Info. Intel and Universal applications are on the whole supported, though may still need some tweaking before every feature is compatible.
    Q: Are there any pitfalls to watch out for?
    A: With all upgrades, backing up your data at least twice has been a given. Hardware can fail independently of downloads and upgrades, though may happen simultaneously. Software may be found to be incompatible that has not been tested with the new upgrade, or combination of other software that might be installed with the upgrade. It is also strongly recommended once your backup is complete, to shut down your computer, remove all but Apple wired keyboard and mouse (notebooks remove all input devices). Then once done, reboot, and go directly to the upgrade distribution system available. Third party system tools, modification, and "maintenance" applications should be verified as compatible, or removed until known to be compatible. Check with developers how to remove if it is essential to use Lion before those applications become compatible. Most "maintenance" tools that deal with system cache, prebinding, are not really maintenance tools. Ask on forum when are the appropriate times to use them before assuming they should be used for upgrades or otherwise.
    Q: How can I get from 10.4 or 10.5 to 10.6.6?
    A: Purchase a 10.6 retail installer from an Apple retail or third party reseller. It has a picture of a Snow Leopard on the DVD, and does not say Upgrade, Dropin, or OEM. Install it, and then install the 10.6.6 combo update from:
    http://support.apple.com/kb/DL1349
    Q: Is it true that I can only get it from the Mac App Store?
    A: Presently this truth is based on current documentation as of the writing of this article. It may change, but we can't speculate as to its change. It has a better chance of changing if users request something different at:
    http://www.apple.com/feedback/macosx.html
    Q: What limitations might one encounter if it doesn't change?
    A: First off the 7 GB space limitation on the hard disc after it is installed. Secondly, the size of the download file requires significant time, unless you have a high speed broadband connection. Times expected are below -
    4 GB at:
    5Mbps is 2 hours.
    at 1 Mbps is 10 hours.
    at 384 kbps is 27 hours.
    at 56k kbps is 184 hours (nearly 8 days).
    If you include the 10.6.6 combo update of 1.06 GB
    add 29 minutes for 5 Mbps
    145 minutes (2 and 25 minutes) for 1 Mbps
    6 and a half hours for 384kbps
    A 24 hour day and 15 hours (for a total of a minimum of 39 hours) for 56kbps
    Remember the retail 10.6 currently does not include the App Store, and those upgrading from 10.5.8 or earlier will need to both buy the retail 10.6, and download the combo 10.6.6 update, not to mention ensure they have the correct processor and 2 GB of RAM. Finally once it is available, you'll have find out how long approximately it takes to install after the download is complete.
    These times do not include installation time, which on a MacBook Pro 3,1 15" installing on a Firewire 800 Newertech Voyager with WD10ACS-322J80 drive, 10.6.7, took 1 hour and a half to complete the installation from double clicking the install command to the registration screen. These times may vary by connection speeds from a non-dedicated connection, or background application usage of the internet. Any applications running when the installation process begins might interfere with the installation itself, and they should be quit first.
    The installer just before it starts has in its package contents an InstallESD.dmg file a DVD burnable image to install on additional computers in the home without downloading over again. So if you desire to reinstall without an extra internet download, extract that file, by selecting the installer in the dock, and control-clicking it, and revealing it in the Finder. Next Control-mouse click it, and select show package contents. Inside that folder is a Shared Support folder. That's where you find the DMG.
    Q: If I purchased a Mac recently, can I get it cheaper?
    A: Yes, visit http://www.apple.com/macosx/uptodate/ for details.
    Q: When will Lion become available?
    A: It became available July 20, 2011.
    Q: Which Macs can run Lion?
    A: Look at Apple menu -> About This Mac -> More Info, and see if you meet the Machine ID and RAM requires under the hardware. 2 GB is required for all These Machine IDs will run Lion:
    Mac Mini 2,1 and later
    MacBook 2,1 and later.
    iMac 5,1 and later.
    All MacBook Air.
    MacBook Pro 2,1 and later
    All MacPros.
    The Macs with the Machine IDs below will not run Lion (x can be any number):
    Mac Mini 1,x or PowerMac x,x
    MacBook 1,x
    MacBook Pro 1,x
    iMac 4,x, 3,x, 2,x, 1,x
    Authored by a brody
     

  • I am using Photoshop CS5 on a new iMac with a wireless keyboard.  I used to be able to hit F11 to perform a custom sharpening action but now the F11 key is the volume control key and I have tried everything to disable or switch the volume key. I have also

    I am using Photoshop CS5 on a new iMac with a wireless keyboard.  I used to be able to hit F11 to perform a custom sharpening action but now the F11 key is the volume control key and I have tried everything to disable or switch the volume key. I have also tried assigning other function keys to initiate the action. Is there a simple solution to this? What am I missing?

    Try unmounting the volume on your iMac using Disk Utility. Then mount it again. You may need to reboot the laptop or relaunch its Finder process (using the Force Quit window) after remounting the drive on your iMac. Remember that no process may be accessing any files on the drive you plan to unmount, or the unmount will fail. Unmounting and remounting an external drive on my iMac made it become visible on my MacBook Pro after it had disappeared.

  • How can I install Photoshop CS5 on a new iMac with no disc drive

    How can I install Photoshop CS5 on a new iMac with no disc drive?

    Hi,
    Please copy this Link http://trials2.adobe.com/AdobeProducts/PHSP/12/osx10/Photoshop_12_LS1.dmg?PID=2159997
    Now open Adobe.com and go to Products Trials. Click on Acrobat Try now and once the download page appears then paste the above mentioned link in the address bar and then press Enter. Download should start immediately.
    Please let me know if it helps.
    regards,
    Abhijit

  • I'm using iTunes 10.6.1 on an iMac 2,66 Ghz intel core Duo with8GB DDR3 and Lion 10.7.3 I hav 260000 mp3 stored on A My Book 3 TB external Fire wire 800 Drive - when I play songs I get short interuptions every 20 to 30 seconds. Can't iTunes handle that?

    I'm using iTunes 10.6.1 on an iMac 2,66 Ghz intel core Duo with8GB DDR3 and Lion 10.7.3 I have 260000 mp3 stored on a My Book 3 TB external fire wire 800 Drive - when I play songs I get short interruptions every 20 to 30 seconds. Can't iTunes handle that number of songs?

    I'm using iTunes 10.6.1 on an iMac 2,66 Ghz intel core Duo with8GB DDR3 and Lion 10.7.3 I have 260000 mp3 stored on a My Book 3 TB external fire wire 800 Drive - when I play songs I get short interruptions every 20 to 30 seconds. Can't iTunes handle that number of songs?

  • How do I get more memory for my Macbook Pro Spring 2010 13-inch with 2.66GHz Intel Core 2 Duo?

    How do I get more memory for my Macbook Pro spring 2010 13-inch with 2.66GHz Intel Core 2 Duo. Apple says no memory currently available for that model. I have 4 GB memory and 3.99 used. Help!

    macette1976 wrote:
    Now I'm confused. This is the one Crucial told me to get:
    CT3309356 - 4GB DDR3 PC3-8500 Unbuffered NON-ECC 1.35V 512Meg x 64
    $45.99
    Also what do you mean that actual memory is 16GB but with Apple it's 8?
    When I go to the "About this Mac" it says Memory 4G 1067 MHz DDR3, then when I go to System Report it says
     Memory Slot
    Bank 0/ DIMM0 2G DDR3 1067 MHZ OK
    Bank 1/ DIMM0 2G DDR3 1067 MHZ OK
    Sorry I'm clueless. Just don't want to buy something that messes up my machine more than it already is.
    The Crucial site appears to have recommended the correct spec 4gB RAM stick for your model. Please note that you will need to remove the existing sticks of RAM to install new, so you will need 2x4gB to get to 8gB.
    When your model of computer was designed/built, it was tested with readily available 2x4gB (8gB). After release RAM retailers have tested it with higher amounts, and Apple didn't update their quoted specs.

  • Which crucial RAM for a new iMac 27" 3.6 Intel Core i5? 1st time buyer

    Hi,
    I'm thinking about buying the new iMac 27" 3.6 Intel Core i5 and was thinking about getting it with the standard 4 GB of RAM from the apple store, and then adding another 12 GB for a total of 16 GB of RAM. This is the RAM from crucial:
    http://www.crucial.com/store/listparts.aspx?model=iMac%203.6GHz%20Intel%20Core%2 0i5%20%2827-inch%20-%20DDR3%29%20Mid%202010&pl=Apple&cat=RAM
    I have never bought RAM separately before. What happens to the 4 GB that are already in the iMAC? Do you just buy 12 GB and add it to the existing 4 GB, or do you buy 2 packages of 8 GB and install those two after removing the existing 4 GB? Could someone please advise me which RAM packages I need to buy to max out my RAM? Thank you for your assistance!!
    Tim

    Do you think it would be worthwhile to sell the 4 GB of RAM that comes with the iMac to decrease the cost buying the 3rd party RAM?
    That depends on what you plan to upgrade to, if you are going take it all the way to 16GB I'd probably hold onto the old RAM for few weeks just to ensure everything is safe and sound but don't expect to get much for it. If you buy the RAM from OWC they will give you a trade in value for it and that's something to investigate.
    Will adding this new RAM void apple care warrantees?
    Of course not, you can download a copy of the manual from the Support site and also get a copy of the warranty. In the manual it will have detailed instructions on how to upgrade RAM, Apple wouldn't put that in there if upgrading RAM would impair the warranty. In the warranty it clearly says if any damage is done that would void the warranty. About the only way you do damage is to pour coffee on the RAM slots while you're upgrading or hammering them in with a ball peen.

  • HT3910 I face problems with the Nvidia 8800 GS on my iMac 24'' 3.06Ghz intel core duo. OS 10.06.08. What can I do to solve the problem and if you recommend upgrade to mountain Lion

    I  face problems with the Nvidia 8800 GS on my iMac 24'' 3.06Ghz intel core duo. OS 10.06.08. What can I do to solve the problem and if you recommend upgrade to mountain Lion

    If you want to sync it to the iPad from that Mac, you need to upgrade it to at least 10.5.8.
    If you want to copy the music to another Mac, you don't. Move the iTunes folder of the item in the Finder's sidebar over as you would any other folder. If you put it somewhere other than the Music folder, launch iTunes with the Option key held down and point it to that location.
    (61713)

Maybe you are looking for