Can I use several adapters for polling multi tables

Hi,
I need to have 100 db polls.
Can I use one bpel to recive data, is there any way to reduce the nunber of bpels ?
Regards

Maybe if you use a view that does a union on all tables. But I would not recommend this as you may get a massive performance hit. Use the DB Poll functionality to poll off the view.
In your test case I would imagine that each table gets different information therefore each data set should be managed separately therfore you will have to 100 BPEL processes anyway.
cheers
James

Similar Messages

  • Can I use Parallel execution for Global Temporary table within SP and How

    Dear Gurus,
    I have Global temporary table as below
    Create global temporary table Temp_Emp
    empno number,
    ename varchar2(20),
    deptno number
    ) on commit preserve rows;
    During processing I insert the data into this table and then fire query on Temp_Emp, get the data and pass it to front end.
    The SP as shown below
    Create or replace procedure get_emp_data
    empid in number,
    emp_detail out RefCsr -- Ref cursor
    as
    begin
    -- some code here
    open emp_detail for
    select *
    from Temp_Emp
    where empno = empid;
    end get_emp_data;
    Can use Parallel Query execution on Temp_Emp table and how ?
    i.e. do need to explicitly use parallel construct in query or is it default.
    Because I have many SQL like above (on global temporary tables) within Stored Procedures.
    Can anybody give me any suggestion.
    Thanking in Advance
    Sanjeev

    How come you are populating a temporary table and then opening a cursor on this temporary table for the front end to use?
    Couldn't you presumably just form a query out of the code you use to populate the temporary table? This is the recommended approach in Oracle.

  • How can I use several albums for a book?

    I started a book but I cannot change the album I want to pull photos from without starting a new book.
    Any suggestions?

    I started a book but I cannot change the album I want to pull photos from without starting a new book.
    I assumes you have a book started - now open the second album and drag the photos to the book project in the source pane on the left - do it again with each album you want to use
    All of the photos you drug to the book - from albums or events - are now available to use in the book - you can add additional photos at any thime by dragging them to the project project in the source pane
    LN

  • How can I use create/createInsert for two different tables

    Hi All,
    I am showing different fields in the UI from different tables. I am able to fetch the data from all the tables and able to modify and save the data.
    Now, the problem when I want to create/insert some data into those columns(from different tables) I am facing issues.
    How can I proceed further??

    Hi Shay,
    Thank you very much for your quick response.
    Actually I am totally new in ADF world and I am trying to implement some applications in ADF.
    I created an UI based on some 3 tables(there is foreign key relation between them) and some other tables. I am able to modify and save my application if there is any data in all the tables.
    My Actual issues are
    1) I removed all the data from the tables. There is a submit(CreateInsert) button, what I expected is on click of the button I should see all the fields in editable mode. But I was able to see only few fields and also in readonly mode. So here my issue is how can i create and save these data.
    2) Consider on my landing page I have just CommandLink/CommandButton. After clicking that page I should get the above screen in create mode(I mean to say all fields in editable mode). How can achieve this?
    Thanks & Regards,
    Ravi.

  • Can i use vps's for linux edge server's???

    I can stream to edge server on fme------>windows7-edge ------> origin-linux-dedicated--and or--vps------>website works...
    but cant do fme---->linix-edge-vps------>linux-orgin-dedicated--or----vps------>website Doesnt work
    nore can i do fme------>linux-edge-vps--->windows7-origin---->website Doesnt work
    All using latest centos tried and same results with ununtu
    so am i out of luck for using vps's?
    any help would be great thanks

    yeah no that doesn't work but get this...
    when i publish to windows edge server the signal gets sent to origin vps  then to viewers...
    but if i make windows origin and vps edge server is does not work dont understand why this is happening
    Date: Wed, 22 Dec 2010 01:45:19 -0700
    From: [email protected]
    To: [email protected]
    Subject: can i use vps's for linux edge server's???
    I agree load balancing part but load balancing should be done in context of subscribing and not in terms of publishing. You can do failover in context of publishing using Multi-point publish.
    If you publish directly to origin and then introduce edge servers for subscribing do you still face issue.
    I mean if you set up your linux VPS as edge and then subscriber goes through that edge - say like rtmp://linuxedge/?rtmp://origin/live - does this work?
    Can you try that out and let me know.
    >

  • Can I use one account for both my labtop and my ho...

    can I use one account for both my labtop and my home computer?
    Solved!
    Go to Solution.

    Softthunder wrote:
    can I use one account for both my labtop and my home computer?
    Hello,
    Yes you can. You can access your account using any Skype enabled computer/device in any country worldwide.
    TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
    I recommend that you always run the latest Skype version: Windows & Mac
    If my advice helped to fix your issue please mark it as a solution to help others.
    Please note that I generally don't respond to unsolicited Private Messages. Thank you.

  • HT204053 Dear Support Team, every time i tried to logon Icloud its gives me wrong user name or password and at the end it show me error " This Apple ID is valid but is not an ICloud Account" then how can i use one account for same Apple ID and ICloud???

    Dear Support Team,
    Every time i tried to logon Icloud its gives me wrong user name or password and at the end it show me error " This Apple ID is valid but is not an ICloud Account" then how can i use one account for same Apple ID and ICloud?
    Thanks

    It is not possible to create a new iCloud account using a Windows machine. You must create the account using a Mac (10.7.5 or more) or an IOS device (iPhone etc). Once that is done you can sign into and use the account on your Windows machine.

  • Can I use touch ID for App Store without using a passcode?

    It seems that the ony way I can use the touch ID for App Store and iTunes is if I have a passcode to get into my phone. I don't want a passcode, it get in and out of my phone too often to have to unlock it all the time and I hate manually typing in my password for App I buy. Why can't it do both, isn't the touch ID just as secure for purchases even if you don't have to unlock the phone to get to it??

    From the article:
    You can set up Touch ID in iOS Setup Assistant or by tapping Settings > Touch ID & Passcode. To set up Touch ID, you must first set a passcode. Touch ID is designed to minimize the input of your passcode, but you need a passcode for additional security validation, such as enrolling new fingerprints.
    So yes, that's how it's designed. You must have a passcode, though as long as you understand the caveats:
    In addition, you will need to enter your passcode to unlock your iPhone in these conditions:
    After restarting your iPhone 5s
    When more than 48 hours have elapsed from the last time you unlocked your iPhone 5s
    To enter the Touch ID & Passcode setting
    and
    You can't use Touch ID for purchases if Require Password in Settings > General > Restrictions is set to Immediately.
    you should be able to use Touch ID without needing your passcode. If none of those circumstances is true and you're still being asked for your passcode to make a purchase from the iTunes Store, it would seem that something is amiss with your iPhone.
    Regards,

  • Can I use same account for android and PC and how ...

    Can I use same account for android tablet and PC and how do I link both?

    You can use the same Apple ID for both phones, you would then be able to use the purchased Apps/Content on both phones without having to pay again.

  • I have two iphone one is iphone 5 and othere is iphone 4 . can i use same id for both ? And do i have to purchase the application again for iphone 4 which i have buyed for iphone 5.??

    i have two iphone one is iphone 5 and othere is iphone 4 . can i use same id for both ? And do i have to purchase the application again for iphone 4 which i have buyed for iphone 5.??

    You can use the same Apple ID for both phones, you would then be able to use the purchased Apps/Content on both phones without having to pay again.

  • Can I use a domain for one site and mobile me for a different site?

    Can I use a domain for one site and mobile me for a different site?
    I have two sites, I would like to have up and I would like to do one through a domain and one through mobileme is this possible?

    Yes you can. You can use the CNAME method of forwarding for the first site (the top site in iWeb) and use the MMe URL for your account for the other site: http://web.me.com/YourAccount_Name/SiteName/
    OT

  • Have iPad, iPod Touch and iPhone 4s. Can I use one charger for all

    I have and iPad, iPhone 4S and iPod 4. Can I use one charger for all 3 and if so, which one. TZ all

    You can use the iPad charger for all.

  • In Bte can i use same Product for 2 different process

    in Bte can i use same Product for 2 different process

    hi
    as per i know yes but since there r two type of interface behaviour is defferent .
    For
    Publish & Subscribe interfaces 
    if any event occur in this type both the process can work simultaneously and they will not intervene each other
    whereas in
    Process interfaces
    at an time any one process can be active.
    Reward if usefull
    Cheers
    Snehi

  • Can you use one PC for 2 different Ipods, with out erasing the others music from Itunes?

    Can you use one PC for different Ipod touch's , with out erasing the other persons Itunes music?

    Yes.  See:
    How to use multiple iPods, iPads, or iPhones with one computer

  • How can I use jbo:InputSelect for a char type filed?

    How can I use <jbo:InputSelect for a char type filed?
    I have two tables. One is room (primary key is room(type is char)), another table is responsibility (foreign ker is room(type is char)). Both tables have same length for room column.
    There is a problem:
    If I use (in the "DataEditComponent.jsp" file)
    <jbo:InputSelect multiple="false" datasource="dsEdit" displaydatasource="roomData" displaydataitem="ROOM" displayvaluedataitem="ROOM" ></jbo:InputSelect>
    to get the room input for responsibility from combobox(Datasource roomData is from room table). In the form the room field cannot bind the data in combobox, alway select the first item. And if I select one item and click the update button.There is an error message:
    Error Message: JBO-27010: Attribute set with value H409 for Room in Responsibility has invalid precision/scale
    I found If I changed the field type from char to varchar2 in database also change the entity objects, it works well. I wonder if there are any diffrence using <jbo:InputSelect tag in char and varchar2 type. How can I use <jbo:InputSelect for a char type filed as i don't want to change my datatype in database at this stage.
    I try this in JDeveloper 9.03, 9.034, 9.04. The result is the same.

    If I were in your shoes, here's how I would do it:
    <%-- Assuming you have dsRoom and dsResponsibility --%>
    <%-- Select is an HTML tag --%>
    <select name="ROOM" size="1">
    <% char roomID =""; // Init your character var
    // Open a rowsetIterator to get the records and add them to the LOV
    <jbo:RowsetIterate datasource="dsResponsibility" changecurrentrow="true" >
    <% roomID = (char)dsResponsibility.getRowSet().getCurrentRow().getAttribute("ROOM"); // Grab the char value
    // add the value to the LOV
    %>
    <option value="<%=roomID%>"><%=roomID%></option>
    </jbo:RowsetIterate>
    </select>
    If you are using this as part of an edit page you may want to utilize the "selected" option of the <option> tag. In one instance I am doing this on an edit page because the use may open an existing record. If I don't account for it, then it will change the DB to contain the first value from the list! You can do a simple check like:
    //Set the current record's char
    char curRecord = (char)rowEdit.getAttribute("ROOM");
    // inside the iterate:
    if (curRecord == roomID) {
    <option value="<%=roomID%>" selected><%=roomID%></option>
    } else {
    <option value="<%=roomID%>" ><%=roomID%></option>
    Hope that helps!

Maybe you are looking for