Can I use the new Time Capsule to backup my mid 2010 Macbook Pro? Also can I want to free up my hard disk, can I save my photos and files on the time capsule and later access through wifi?
Can I use the new Time Capsule to backup my mid 2010 Macbook Pro? Also can I want to free up my hard disk, can I save my photos and files on the time capsule and later access through wifi?
Can I use the new Time Capsule to backup my mid 2010 Macbook Pro?
Yes, if you are asking about using Time Machine to backup the Mac.
Also can I want to free up my hard disk, can I save my photos and files on the time capsule and later access through wifi?
You are not thinking of deleting the photos and files on your Mac, are you? If you do this, you will have no backups for those files.
Another concern is that Time Machine backs up the changes on your Mac. At some point, Time Machine will automatically delete the photos and files from the Time Capsule.....you just don't know when this might occur.
In other words, only delete files from your Mac that you can afford to lose.
Similar Messages
-
Can I connect a blue ray player/burner to my mid 2010 MacBook Pro 17"?
Can I connect a blue ray player/burner to my mid 2010 MacBook Pro 17"?
Yes. Here are a couple:
Blu-ray Player 2.8.2.1183
iDeer Blu-ray Player 1.2.3.1183 -
Is it possible to connect my mid 2010 Macbook Pro with my 21.5" iMac 11,2 so that I can work with dual screens?
try xxx - may work
_may_ work. -
I have a question pertaining to the factory hard drive in this Macbook pro mid-2010 that i have. Currently my system profiler is showing that I am using only 1.5 GB/s of the maximum 3.0 GB/s allowed in the SATA II controller. below are a couple of copy and pastes of the information on my Apple product. Any help would be much appreciated before i have to go to the genius bar and battle it out with them. I am using the operating System: Lion OS X 10.7.2
Best,
James
COMPUTER INFORMATION:
Model Name: MacBook Pro
Model Identifier: MacBookPro7,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.4 GHz
Number of Processors: 1
Total Number of Cores: 2
L2 Cache: 3 MB
Memory: 8 GB
Bus Speed: 1.07 GHz
Boot ROM Version: MBP71.0039.B0B
Serial SATA information
NVidia MCP89 AHCI:
Vendor: NVidia
Product: MCP89 AHCI
Link Speed: 3 Gigabit
Negotiated Link Speed: 1.5 Gigabit
Description: AHCI Version 1.30 Supported
Hitachi HTS545025B9SA02:
Capacity: 250.06 GB (250,059,350,016 bytes)
Model: Hitachi HTS545025B9SA02
Revision: PB2AC60W
Serial Number: 100917PBL200CSKTY7TN
Native Command Queuing: Yes
Queue Depth: 32
Removable Media: No
Detachable Drive: No
BSD Name: disk0
Rotational Rate: 5400
Medium Type: Rotational
Partition Map Type: GPT (GUID Partition Table)
S.M.A.R.T. status: Verified
Volumes:
disk0s1:
Capacity: 209.7 MB (209,715,200 bytes)
BSD Name: disk0s1
Content: EFI
Machintosh HD:
Capacity: 249.2 GB (249,199,591,424 bytes)
Available: 52.48 GB (52,482,621,440 bytes)
Writable: Yes
File System: Journaled HFS+
BSD Name: disk0s2
Mount Point: /
Content: Apple_HFS
Recovery HD:
Capacity: 650 MB (650,002,432 bytes)
BSD Name: disk0s3
Content: Apple_BootSame problem here, but only on the second SATAII, same mid-2010 MBPro
1st (HD)
NVidia MCP89 AHCI:
Vendor: NVidia
Product: MCP89 AHCI
Link Speed: 3 Gigabit
Negotiated Link Speed: 3 Gigabit
Description: AHCI Version 1.30 Supported
OCZ-AGILITY3:
Capacity: 360.08 GB (360,080,695,296 bytes)
Model: OCZ-AGILITY3
Revision: 2.150000
Serial Number: OCZ-2589034J44O258XZ
Native Command Queuing: Yes
Queue Depth: 32
Removable Media: No
Detachable Drive: No
BSD Name: disk0
Medium Type: Solid State
TRIM Support: No
Partition Map Type: GPT (GUID Partition Table)
S.M.A.R.T. status: Verified
2nd (Originally Optical Drive)
NVidia MCP89 AHCI:
Vendor: NVidia
Product: MCP89 AHCI
Link Speed: 3 Gigabit
Negotiated Link Speed: 1.5 Gigabit
Description: AHCI Version 1.30 Supported
OCZ-AGILITY3:
Capacity: 360.08 GB (360,080,695,296 bytes)
Model: OCZ-AGILITY3
Revision: 2.150000
Serial Number: OCZ-YU4C6H7V6390284T
Native Command Queuing: Yes
Queue Depth: 32
Removable Media: No
Detachable Drive: No
BSD Name: disk1
Medium Type: Solid State
TRIM Support: No
Partition Map Type: GPT (GUID Partition Table)
S.M.A.R.T. status: Verified -
I have a mid 2010 Macbook Pro running Snow Leopard and foolishly upgraded to Yosemite. Now have numerous problems. Is it possible to go back in time with Time Machine and reinstall Snow Leopard? Then upgrade to Lion or Mavericks? Any other ideas on how I can exit Yosemite?
Once you get yourself back to Snow Leopard, if you still want to upgrade somewhat, I would suggest the following:
1. Get an external hard drive that you can use for experiments with new OS versions. You could partition it into 2 or 3 partitions. You could then clone your existing Snow Leopard system to one partition using Carbon Copy Cloner (well worth $40) or SuperDuper ($25).
2. Buy OS X Mountain Lion for $20, through the Apple online store (I don't think it's available through the App Store). Apple has decided to make it very difficult for anyone to get Mavericks unless they have already downloaded it.
You will receive two e-mails from Apple, one containing a PDF with a redemption code, and one with the password you will need to unlock the PDF. Using the code, you will download Mountain Lion from the App Store, where it will appear among your Purchased items.
After ML finishes downloading, its installer app will launch itself. When you see this launch screen, QUIT the install app immediately! Go to your applications folder, find the Install OS X Mountain Lion app, and copy it to a safe location outside of your Applications folder. Keeping one or more copies will allow you to reinstall without unnecessary aggravation if you later need or want to do that. At this point, you can re-launch the Installer in the Applications folder and let it run. You can install it on a clean partition on your external HD, or you can allow it to upgrade the Snow Leopard clone you created on your external drive, or you can do both. This should allow you to test how everything works for as long as you like.
3. If you left yourself a free partition on your test drive, try a clean install of Yosemite and set everything up from scratch (do not migrate anything). This will allow you to see whether your problems with it were related to something in your Snow Leopard system. -
Why can't I use my mid 2010 macbook pro with 8GB memoir and NVIDIA GEForce GT 330M 256MB to run 3D in photoshop CC?
3-D is very memory intensive.
System requirements | Photoshop
Mac OS
Multicore Intel processor with 64-bit support
Mac OS X v10.7, v10.8, or v10.9
2 GB of RAM (8 GB recommended)
3.2 GB of available hard-disk space for installation; additional free space required during installation (cannot install on a volume that uses a case-sensitive file system or on removable flash storage devices)
1024x768 display (1280x800 recommended) with 16-bit color and 512 MB of VRAM (1 GB recommended)**
OpenGL 2.0–capable system
Internet connection and registration are necessary for required software activation, membership validation, and access to online services.*
** 3D features are disabled and some Mercury Graphics Engine enhanced features may not work with less than 512 MB VRAM. Read the Help article.
Bottom line, you don't have enough VRAM
Nancy O. -
My mid-2009 MacBook Pro has just died via a painful (for me) hard drive failure. I backed up a good percentage of files recently but not enough to keep me happy. I need to access the dead drive on the MBP via a 2008 iMac. Best options?
I have ordered a 800 firewire to 800 firewire cable and am hoping to use the target mode option to copy files from the MBP.
Is this possible?
Hope so!
Any advice and or help would be greatly appreciated.
Many thanks,
NeilThanks Ogelthorpe.
Just bought an enclosure to try that also.
Hoping the MBP isn't really dead but just feigning death
Fingers crossed. -
Hello All,
I'm considering getting a new SSD drive to add on to my Mid-2010 Macbook Pro (13 inches, unibody), and wondering which one of the following two options I should really adapt:
(1) Replace the original OEM hard drive in the main bay with the new SSD drive, and then remove the Superdrive (or the optical CD drive) and to be fitted into an external enclosure for using it externally in the future, and then relocate the original OEM hard drive into the Superdrive position, so both the new SSD (preferably for running the OS and system files) and the old OEM hard drive (for storing media and documents for example) could be used; and
(2) Keep the original OEM hard drive in place in the main drive, and buy a superdrive/optical drive caddy to goes with the new SSD drive, and together place the new SSD drive fitted inside the caddy into the position of the Superdrive/Optical CD drive, and configure the boot preference to be booting from the Superdrive/Optical Drive (which is now the SSD drive with OS and system files);
I've done some researches and some suggested that option (2) is better approach for at least two reason: (a) the MBP main drive come with some sort of shock proof sensor, so placing the original optical hard drive in the main is better than placing it in the super/optical drive where there is NO shock sensing feature provided, and placing SSD in the super/optical drive, one doesn't really have to worry so much about shocks; and (b) as during the process of shutting down the MBP, for optical hard drive, some power will sometimes needed to finally spin down the drive, but if such optical hard drive is place in the superdrive, the power maybe cut off right away when MBP shut down, which may cause issue to the optical hard drive in a long run as it never properly spin it down.
Then the main concern is that, if I adapt option (2) above, placing SSD in the super/optical drive bay and install and running the OS from there, will it decrease the performance (i.e. speed, latency, and etc.) as if i was to put the new SSD in the main drive?
Also, any suggestions with respect to Samsung 840 EVO vs. Samsung 850 EVO (250GB)? any well-rated HD caddy aside from OWC for moving the main HDD to optical CD bay? and perhaps an external enclosure for the Superdrive? Thanks in advance for any comment and/or suggestion.
- JackCould you provide some rationale(s) behind it? As far as I know, the mid 2010 Macbook Pro, the HDD is running via the SATA interface at running at 3.0 Gb/s, which is SATA II, and the Super-drive and/or the Optical drive, which is also running via SATA II interface, so I would assume the performance (i.e. primarily in speed) would be similar if not the same by placing the SSD drive in either one of the two places.
Also, wouldn't it be better by placing the SSD in the optical so the OEM HDD could be kept in the original main bay since it has the shock-sensing feature there? -
I have the latest Mac Air 13" and I have a Seagate 500MB external hard disk I cant copy or Cut any files on the hard disk and I cant even delete any files. I have the settings as Read and Write in the get info tab. Please helpand also note that my hard drive was formatted on a Windows 7 Laptop.
thats the problem, its in MSDos (Fat) or NTFS for Windows.
Options.....
1. offload all that data on the HD onto your PC, THEN format the HD in EXFAT for use on BOTH PC and Mac for read/write.....then reload all (or as you need) that data back onto the HD
2. get another HD, and format it for Mac OSX extended journaled.
FAT32 (File Allocation Table)
Read/Write FAT32 from both native Windows and native Mac OS X.
Maximum file size: 4GB.
Maximum volume size: 2TB
You can use this format if you share the drive between Mac OS X and Windows computers and have no files larger than 4GB.
NTFS (Windows NT File System)
Read/Write NTFS from native Windows.
Read only NTFS from native Mac OS X
To Read/Write/Format NTFS from Mac OS X, here are some alternatives:
For Mac OS X 10.4 or later (32 or 64-bit), install Paragon (approx $20) (Best Choice for Lion)
Native NTFS support can be enabled in Snow Leopard and Lion, but is not advisable, due to instability.
AirPort Extreme (802.11n) and Time Capsule do not support NTFS
Maximum file size: 16 TB
Maximum volume size: 256TB
You can use this format if you routinely share a drive with multiple Windows systems.
HFS+ ((((MAC FORMAT))) (Hierarchical File System, a.k.a. Mac OS Extended (Journaled) Don't use case-sensitive)
Read/Write HFS+ from native Mac OS X
Required for Time Machine or Carbon Copy Cloner or SuperDuper! backups of Mac internal hard drive.
To Read HFS+ (but not Write) from Windows, Install HFSExplorer
Maximum file size: 8EiB
Maximum volume size: 8EiB
You can use this format if you only use the drive with Mac OS X, or use it for backups of your Mac OS X internal drive, or if you only share it with one Windows PC (with MacDrive installed on the PC)
EXFAT (FAT64) ------Can read/write from both PC and Mac
Supported in Mac OS X only in 10.6.5 or later.
Not all Windows versions support exFAT.
exFAT (Extended File Allocation Table)
AirPort Extreme (802.11n) and Time Capsule do not support exFAT
Maximum file size: 16 EiB
Maximum volume size: 64 ZiB
You can use this format if it is supported by all computers with which you intend to share the drive. See "disadvantages" for details. -
I took my laptop to my local Apple store to have the problem diagnosed and they told me the problem lies in the grpahics card which will require the replacement of the entire logic board at a cost to me of $340.
after that I did some research on the topic and found that this was a massive problem on this model of macbook pro and Apple never issued a recall to fix the issue, are there any class action suits in this category currently underway? if so how can I join?I also have a mid-2010 Macbook Pro 15". Also, I had paid $100 for Apple Developer account and I can't even use Xcode or Unity3D to work on my game because the moment I write a line of code, my computer crashes. Scratch that, I used to have an Apple Developer account (I let it expire a couple of weeks ago). It hasn't been of much use since my Macbook Pro crashes 15 times a day.\
A month after buying a mid-2010 Macbook Pro 15" directly from Apple, it began to crash. At first, I assumed it was my fault as I had been messing around with Bootcamp and doing other heavy stuff, but I quickly learned it would randomly decide to shutdown regardless of the task at hand. I was very busy at the time. I was a fledgling teacher in France, and I hardly had any time, or money, to put toward a 84 euro train ticket to Paris. Also, OS X updates were around the corner (Lion, Mountain Lion), so I held out, hoping the issue would be resolved with the updates.
During my investigation of the issue, I did find the TS4088 article. It recommended I install some updates, and then it described a problem that seemed similar to my own, but the order in which the problems occured, as described in the TS4088 article, did not follow the same pattern that my computer had been experiencing–there was no gray or black screen after the restart warning message when my mac crashed. The first time I found TS4088 on Apple's Support page (at a time when their product recalls were easier to locate before they redesigned their website), it was a couple of months after I had bought the computer. I reasoned that my Macbook Pro must not be suffering from the same issues as I had never seen the video freeze or go black before seeing a restart message. The restart warning message is the last thing I saw, no loss of video or black(or gray) screen afterwards. My computer would simply start to boot up again.
About two years after buying the computer, and suffering from about 3 GPU panics a day, I searched for the TS4088 article again, wondering if I had misread it, and that maybe the issues described in the article were the same issues I was experiencing. This time I could not find the TS4088 article on Apple's Website. I searched over and over again, but it was nowhere to be found. I assumed that issue had been resolved and the article removed. Now after three years of using a faulty, unreliable computer, I was feeling like a schmuck. I searched again on Apple's website to find the TS4088 article, or any new ones that outlined my very apparent GPU issues, but I had no luck. I circled Apple's website over and over and could not find that article. It was only through a link other frustrated mid-2010 Macbook Pro owners had posted on some other website that I found the link to TS4088, also learning that the forum's users were experiencing my same problems.
Based on the language Apple used to describe the problem, I did not reason that I was suffering the same issue. Here's what happens when my computer crashes:
• The computer seems to shut down. The display turns off, the fans stop spinning
• The message "Your computer was restarted because of a problem . . . Press any key to restart" is displayed.
• I press any key, the computer restarts, I wait for next crash to interrupt my work
Excerpt from TS4088
"Symptoms
Apple has determined that a small number of MacBook Pro (15-inch, Mid 2010) computers may intermittently freeze or stop displaying video on the built-in display or on an external display connected to the MacBook Pro. In this situation, you may also see a restart warning message before the video is lost or the display turns black or gray."
My computer never displays a restart message before the video is lost or display turns black. My Macbook Pro mid 2010 loses the picture on the display, and less than a second after that is the restart warning displayed. The video would never freeze or stop playing, rather the whole computer just dumped all of its processes and displayed a warning message asking me to press any key to restart.
My issues with this problem are the following:
•The problems described in TS4088 do not accurately reflect what users are experiencing. TS4088 is misleading in this respect.
•The article TS4088 was not easy to find on Apple's website. It seemed to have moved to an obscure, impossible-to-find location that could only be found thanks to the great number of other Mac users who are experiencing the same problem.
This issue hasn't been managed dutifully. I'm annoyed to have sunk money into a developer account. I'm annoyed that I sunk money into an expensive product that does not work. I'm annoyed that the description of the issue afflicting mid 2010 Macbook Pros was inaccurately and misleadingly described and that links to the TS4088 article disappeared from Apple's website when I could have truly benefitted from them. I am especially annoyed that my life in graphic design, web development, and iOS development has stagnated for several months as my computer crashes some 15 times a day. I am, however, pleased with the speed at which a Mac can boot up. -
Since upgrading my mid-2010 MacBook Pro from the original Snow Leopard to Yosemite 10.10.2 there have been multiple instances of restart (crash) also slow operation & pop up message stating web content has failed. Any suggestions?
Many thanks for your interest, I've downloaded & run the app as suggested, report copies & pasted below.
Problem description:
Following upgrade from Snow Leopard to Yosemite 10.10.2 machine is slower & suffers from shut down / reboot and closing web pages due to unexpected error
EtreCheck version: 2.1.8 (121)
Report generated 6 February 2015 08:40:29 GMT
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
MacBook Pro (15-inch, Mid 2010) (Technical Specifications)
MacBook Pro - model: MacBookPro6,2
1 2.4 GHz Intel Core i5 CPU: 2-core
4 GB RAM Upgradeable
BANK 0/DIMM0
2 GB DDR3 1067 MHz ok
BANK 1/DIMM0
2 GB DDR3 1067 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Battery Health: Normal - Cycle count 75
Video Information: ℹ️
Intel HD Graphics - VRAM: 288 MB
Color LCD 1440 x 900
NVIDIA GeForce GT 330M - VRAM: 256 MB
System Software: ℹ️
OS X 10.10.2 (14C109) - Time since boot: 0:13:14
Disk Information: ℹ️
Hitachi HTS545032B9SA02 disk0 : (320.07 GB)
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Macintosh HD (disk1) / : 318.84 GB (134.68 GB free)
Core Storage: disk0s2 319.21 GB Online
MATSHITADVD-R UJ-898
USB Information: ℹ️
BUFFALO HD-PVU2 500.11 GB
EFI (disk2s1) <not mounted> : 210 MB
Time Machine Backups (disk2s2) /Volumes/Time Machine Backups : 499.76 GB (257.33 GB free)
Apple Internal Memory Card Reader
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Apple Inc. Built-in iSight
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/System/Library/Extensions
[not loaded] jp.co.buffalo.driver.turbousbhdd (1.0.0) [Click for support]
Launch Agents: ℹ️
[loaded] com.hp.help.tocgenerator.plist [Click for support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Click for support]
User Launch Agents: ℹ️
[loaded] com.google.keystone.agent.plist [Click for support]
User Login Items: ℹ️
Skype UNKNOWN (missing value)
Safari Application (/Applications/Safari.app)
Dropbox Application (/Applications/Dropbox.app)
Android File Transfer Agent Application (/Users/[redacted]/Library/Application Support/Google/Android File Transfer/Android File Transfer Agent.app)
ConnectService Application (/Library/Application Support/ArcSoft/Connect Service/ConnectService.app)
Internet Plug-ins: ℹ️
Flip4Mac WMV Plugin: Version: 2.4.4.2 [Click for support]
FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
QuickTime Plugin: Version: 7.7.3
Flash Player: Version: 16.0.0.305 - SDK 10.6 [Click for support]
Default Browser: Version: 600 - SDK 10.10
Google Earth Web Plug-in: Version: 7.1 [Click for support]
Silverlight: Version: 4.0.60129.0 [Click for support]
iPhotoPhotocast: Version: 7.0
User internet Plug-ins: ℹ️
CitrixOnlineWebDeploymentPlugin: Version: 1.0.105 [Click for support]
3rd Party Preference Panes: ℹ️
Flash Player [Click for support]
Flip4Mac WMV [Click for support]
Time Machine: ℹ️
Skip System Files: NO
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 318.84 GB Disk used: 184.16 GB
Destinations:
Time Machine Backups [Local]
Total size: 499.76 GB
Total number of backups: 184
Oldest backup: 2010-12-10 15:37:39 +0000
Last backup: 2015-02-06 02:49:24 +0000
Size of backup disk: Too small
Backup size 499.76 GB < (Disk used 184.16 GB X 3)
Top Processes by CPU: ℹ️
5% WindowServer
1% ConnectService
1% Skype
0% systemstatsd
0% launchd
Top Processes by Memory: ℹ️
193 MB Skype
168 MB mds_stores
132 MB com.apple.WebKit.WebContent
107 MB Mail
99 MB ocspd
Virtual Memory Information: ℹ️
889 MB Free RAM
1.99 GB Active RAM
455 MB Inactive RAM
825 MB Wired RAM
1.11 GB Page-ins
0 B Page-outs
Diagnostics Information: ℹ️
Feb 6, 2015, 08:27:32 AM /Library/Logs/DiagnosticReports/com.apple.AmbientDisplayAgent_2015-02-06-082732 _[redacted].crash
Feb 6, 2015, 08:25:19 AM Self test - passed
Feb 5, 2015, 04:37:08 PM /Users/[redacted]/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_20 15-02-05-163708_[redacted].crash
Feb 5, 2015, 10:01:02 AM /Users/[redacted]/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_20 15-02-05-100102_[redacted].crash
Feb 5, 2015, 12:03:59 AM /Library/Logs/DiagnosticReports/HP Scan_2015-02-05-000359_[redacted].cpu_resource.diag [Click for details]
Feb 4, 2015, 11:58:58 PM /Library/Logs/DiagnosticReports/HP Scan_2015-02-04-235858_[redacted].cpu_resource.diag [Click for details]
Feb 4, 2015, 11:54:35 PM /Library/Logs/DiagnosticReports/HP Scan_2015-02-04-235435_[redacted].cpu_resource.diag [Click for details]
Feb 4, 2015, 11:49:03 PM /Library/Logs/DiagnosticReports/HP Scan_2015-02-04-234903_[redacted].cpu_resource.diag [Click for details]
Feb 4, 2015, 09:40:16 PM /Users/[redacted]/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_20 15-02-04-214016_[redacted].crash
Feb 4, 2015, 09:38:12 PM /Users/[redacted]/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_20 15-02-04-213812_[redacted].crash
Feb 4, 2015, 09:27:56 PM /Users/[redacted]/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_20 15-02-04-212756_[redacted].crash
Feb 4, 2015, 09:25:25 PM /Users/[redacted]/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_20 15-02-04-212525_[redacted].crash
Feb 4, 2015, 09:20:16 PM /Users/[redacted]/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_20 15-02-04-212016_[redacted].crash
Feb 4, 2015, 09:18:10 PM /Users/[redacted]/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_20 15-02-04-211810_[redacted].crash
Feb 4, 2015, 09:12:54 PM /Users/[redacted]/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_20 15-02-04-211254_[redacted].crash
Feb 4, 2015, 08:40:48 PM /Users/[redacted]/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_20 15-02-04-204048_[redacted].crash
Feb 4, 2015, 08:22:04 PM /Users/[redacted]/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_20 15-02-04-202204_[redacted].crash
Feb 4, 2015, 12:11:35 AM /Users/[redacted]/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_20 15-02-04-001135_[redacted].crash
Feb 3, 2015, 09:44:33 PM /Users/[redacted]/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_20 15-02-03-214433_[redacted].crash
Feb 3, 2015, 05:40:21 PM /Library/Logs/DiagnosticReports/HP Scan_2015-02-03-174021_[redacted].cpu_resource.diag [Click for details]
Feb 3, 2015, 09:05:45 AM /Users/[redacted]/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_20 15-02-03-090545_[redacted].crash
Jan 28, 2015, 06:10:42 PM /Library/Logs/DiagnosticReports/Kernel_2015-01-28-181042_[redacted].panic [Click for details]
Jan 21, 2015, 10:51:25 PM /Library/Logs/DiagnosticReports/Kernel_2015-01-21-225125_[redacted].panic [Click for details]
Jan 20, 2015, 11:12:47 AM /Library/Logs/DiagnosticReports/Kernel_2015-01-20-111247_[redacted].panic [Click for details]
Jan 18, 2015, 09:57:31 AM /Library/Logs/DiagnosticReports/Kernel_2015-01-18-095731_[redacted].panic [Click for details]
The only observations are that the backup drive is deemed too small and the quite long list of diagnostic reports dated between Jan 18, 2015 (which I believe is the day I upgraded to Yosemite) & today the latest Yosemite update was installed on Jan 28, 2015
Any further assistance will be appreciated -
Does OS Lion 10.7.5 support Airplay mirror of Apple TV 3? I can't find the option in Setting>Display on my mid 2012 MacBook Pro.
I've rebooted all 3 devices, still does not work. Both Apple TV and MBP are on the same wifi. And the Apple TV AirPlay option is on. Can someone help? Thank you.About AirPlay and Airplay Mirroring
AirPlay Mirroring requires a second-generation Apple TV or later, and is supported on the following Mac models: iMac (Mid 2011 or newer), Mac mini (Mid 2011 or newer), MacBook Air (Mid 2011 or newer), and MacBook Pro (Early 2011 or newer). For non-qualifying Macs you can try using Air Parrot.
Several Apple Articles Regarding AirPlay
Apple TV (2nd and 3rd gen)- How to use AirPlay Mirroring
How to set up and configure AirPort Express for AirPlay and iTunes
About AirPlay Mirroring in OS X Mountain Lion
iTunes 10- About playing music with AirPlay
Troubleshooting AirPlay and AirPlay Mirroring
Using AirPlay
Thanks to the $15 Beamer, AirPlay streaming is still possible on Macs that do not support Airplay and mirroring.
Another solution is the Air Parrot. -
I have been using my displayport to drive a video only HDMI input by way of a displayport to DVI converter followed by a DVI to HDMI converter. It works great but of course there's no audio at the end of that chain because DVI is a video only connector.
That made me wonder... is my displayport outputting both audio and video which could be converted directly to HDMI (giving me both audio and video at the HDMI end)? How can I tell if my mid-2010 macbook pro's displayport connector is outputting both audio and video? My internet search is inconclusive about whether both are available on that connector for my mid 2010 model macbook pro.
Thank you.Hi, these MacBooks of 2010 support Audio through display port:
MacBook Mid 2010 (GeForce 320M)
MacBook Air 11 inch 2010 or 13 inch 2010 (Core 2 Duo)
MacBook Pro 13 inch 2010 (GeForce 320M)
MacBook Pro 15 inch 2010 or 17 inch 2010 (GeForce 330M),
No 2009 Macs support audio through DisplayPort
All 2011 and latter Macs support displayPort audio
so it looks like you can get audio if yo have the Macbook with Geforce 320M -
Can I connect my late-2012 iMac to my mid-2010 MacBook Pro?
I've just bought a new late 2012 27" iMac and also have a mid-2010 MacBook Pro.
I also purchased a Thunderbolt cable, is there anyway I can use this to connect the two? If not... do I have any options for file sharing between the two?The Thunderbolt cable is useless to connect both Macs. Mid 2010 MacBooks Pro have got Mini DisplayPort, and Mini DisplayPort isn't compatible with Thunderbolt.
If you want to use Target Disk Mode in order to connect both Macs, you have to buy two things: the Thunderbolt to FireWire adapter, and a FireWire cable to connect the adapter and the MacBook. You have to connect the Thunderbolt adapter to the Thunderbolt port of the iMac.
Then, if you want to transfer old files from the backup, you can use Migration Assistant if you want to migrate applications and user accounts (if you haven't set up the iMac, use Setup Assistant. If you want to transfer individual files, use Target Disk Mode -
Can i use my iPhone 5s as a remote controller to my MacBook pro?
Can i use my iPhone 5s as a remote controller to my MacBook pro with retina display such as keynote presentations etc.?
Hey there emrahtatir,
It sounds like you want to remotely control Keynote and iTunes from your phone. For Keynote this article will help you out:
Using Keynote Remote
http://support.apple.com/kb/HT6112
To be able to control your iTunes application from your phone you would need the Remote app on the iPhone and Home Sharing enabled:
Set up Remote app for iPhone, iPad, and iPod touch
http://support.apple.com/kb/HT1947
You can download Remote using the App Store on iPhone, iPad, or iPod touch or using iTunes on your Mac or PC. Remote requires an iOS device and either Apple TV or iTunes 9.2.1 or later. You can see the version of iOS you need and other requirements for the Remote app.
Remote uses Home Sharing to set up and control iTunes and Apple TV (2nd and 3rd generation). See how you can use the Remote app. For best performance, update your iOS device, Apple TV, and iTunes. To use Remote, make sure your devices are on the same network, and log in to Home Sharing on your iOS device and iTunes or Apple TV with the same Apple ID.
Thank you for using Apple Support Communities.
Regards,
Sterling
Maybe you are looking for
-
HT201412 my Ipad will not turn on to charge, the apple symbol appears then it blank out
Ipad will not turn on to charge
-
Please explain rate of TDS?
-
i have attached a image of 2d array. i have to make average of this aaray's saperate parameter in every 1minuts Prashant Soni LabVIEW Engineer Attachments: average.PNG 6 KB
-
IWeb and Facebook Share Button
Hi, I know people have asked about this issue, but I don't seem to be able to decipher any reasonable solutions.. I want to add the Facebook Share button to some of my iWeb pages. To do that I am using the HTML widget.. I know that because it's a wid
-
Hello experts, Our company uses Oracle 10g DB and we are using Stored Procedures to fetch employees data from various tables. We fetch only fresh data depending on the date when it is retrived. Hence the result of the query depends on Sysdate value.