Can I use the sub from my Gigaworks 700s with a receiver?

The Sub from this speaker setup with this receiver. Someone said I could purchase a 3.5mm to RCA adapter like this and it MIGHT be possible to connect the 3.5mm to the Subwoofer/Center input on the back of the subwoofer and then try both of the RCA's on the subwoofer output on the back of the receiver. One of the RCA's would be for that center speaker that I will now be hooking up via speaker wire and won't need it via 3.5mm/RCA, and the other RCA plug would be for the speaker, which would hopefully successfully output it from the receiver to the sub. Does anyone know if this could work?

I have the exact same charger, and have been using it without a problem with my new iPhone 4S this week. The wall charger from my Original iPhone 2G also charges it.

Similar Messages

  • How can I use the speakers from my old iMac (with miniRCA? plug) on a new iMac

    How can I use the speakers (M-Audio) from my old 24" iMac on a new 27" iMac?  There is no jack on the new iMac - is there an adapter that will use the mini-RCA (?) plug from my old speakers to connect them to a new iMac?  Thanks ...

    Thanks again!
    Hmmm ... I wonder.  The input jack for external speakers quit working on my old iMac (it made lotsa static noise for a while when I moved the plug or computer, then quit working completely; I figure something inside the computer got loose or crapped out - and I'm too cheap/lazy to take it the 20 miles to the nearest shop that might fix it).  When I plug the speakers into the headphone jack on the old iMac, I get very low volume or just one channel.
    I don't have the new iMac yet, but I was hoping to use these old speakers instead of buying new ones.  I will certainly try your solution - what do I have to lose?  If they don't work, then I get new ones - or try something else.
    Many thanks for your time!

  • Hi - have lost my Install DVD for my macbook Pro - can I use the one from my husbands Macbook or how do I get a new one??

    Hi
    Have lost my Install DVD for macbook pro and need it because my computer black out all the time - can I use the one from my husbands macbook (not pro) or how do I get a new one???

    10.6 Snow Leopard ?
    You can call Apple and order one.  1-800-275-2273
    You cannot use an install dvd that is shipped with another computer.

  • Can I use the sim from my iphone 5c in the ipad air wifi cellular?

    Can I use the sim from my iphone 5c in the ipad air wifi+cellular?

    Both the iPad Air and iPhone 5C use a nano-SIM. Physically, they will work, but your operator may have some restriction. You should check with them.

  • Can i use the sim from an ipad1 in ipad2

    can i use the sim from a ipad1 in a ipad2

    Yes. Try inserting the SIM into the new iPad. If you have already set the iPad up, you may have to restore it and put all the data back on.

  • Can I use the display from the iphone or rotate so that I can use the tv in portrait orientation? or rotate the display of the tv?

    Can I use the display from the iphone or rotate so that I can use the tv in portrait orientation with a app or appleTV? or rotate the display of the tv?

    The landscape and portrait mode when AirPlaying your iPhone to the Apple TV will depend on the app you are in on the iPhone. 
    For example, the home screen on your iPhone is in portrait mode even if you rotate the phone, so if you are AirPlay mirroring this, it will show in portrait mode on the TV.  If you have photos taken in landscape mode and rotate your phone or watch a video in landscape mode, then the video should appear in landscape mode on the TV. 
    If things that should be in landscape mode are not in landscape mode, you might have the orientation lock turned on.  You can turn it off or on using the steps in this link: http://www.cultofmac.com/142535/how-to-enable-orientation-lock-on-your-ios-devic es-ios-tip/
    I hope this helps!

  • HT201320 I have two email accounts. However, the iPad automatically uses the account that I only want to use for business. How can I change the account from which mail is sent and received?

    I have two email accounts. However, the iPad automatically uses the account that I only want to use for business. How can I change the account from which mail is sent and received?

    You are most welcome

  • Can I use the iPhone 6 t-mobile version with straight talk?

    Can I use the iPhone 6 t-mobile version with straight talk?

    All,
    I have read and understand most of the post (s) on this: Apple Support Community:
    It looks like the long way around my elbow approach: (piecing together an iPhone 6+ with a Straight Talk AT&T /T Mobile; Compatible Nano SIM Card) may yet work, just a bit gun shy on the $949.00 cost for the iPhone 6+ from Apple.
    I live in Hawaii on the island of Oahu (north shore), and have  an iPhone 4 8gb cdma iPhone which is on Verizon's network rebranded by TFW / Straight Talk for several years. It works fine but I need an iPhone with more storage.
    I have had a talk / chat with both sides Apple & Straight Talk, neither have real answers to support using the iPhone 6+ with Straight Talk as a carrier.
    On the Apple site: " http://www.apple.com/iphone/LTE/ ". It is clear that Straight Talk has certified their LTE network with iPhone 6/6+ to meet basic standards.
    I / we need all of the successful trail braisers on this community to post what works & what does not work.
    What I plan / have to purchase / buy:
    Direct from Apple:
    1. Contract-free iPhone 6 Plus 128GB Space Gray (GSM) T-Mobile. (pending research to ensure it will work). Apple confirms, without the T Mobile nano sim that this iPhone is unlocked.
    Direct from Straight Talk:
    2. AT&T /T Mobile; Compatible Nano SIM Card. (GSM; on its way)
    Would have purchased a Verizon Nano SIM Card from Straight Talk but they do not seem to have one.
    All support, advice & information is greatly appreciated.
    V/R
    Rick from Hawaii

  • Can I use the Apple ADC to DVI adapter with a VGA monitor?

    Hey everybody,
    I have a quick question. I work on computers fr friends and family as a hobby. I have an ADC monitor and need ot be able to hook up computers with a VGA port on them to it. Can I use the Apple ADC to DVI adapter along with an Apple DVI to VGA adapter to successfully connect VGA computers to my ADC display? I was assuming this would work and ordered both adapters but now I have made myself nervous about weather or not this will actually work. Has anybody out there successfully done this? Thanks for your help in advance everybody.

    You can't run an ADC display with a VGA computer without a converter. Adapters won't do it.
    a VGA to ADC converter will drive the ADC display directly
    <http://www.gefen.com/kvm/product.jsp?prod_id=1301>
    If you have the Apple DVI to ADC adapter
    <http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore.woa/wa/RSLID?mco=18 72D402&nplm=M8661LL/B>
    you could use it with a VGA to DVI converter
    <http://www.gefen.com/kvm/product.jsp?prod_id=1310>
    It might be cheaper to get DVI graphics boards for the computers and use the Apple DVI to ADC adapter.
    <http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore.woa/wa/RSLID?mco=18 72D402&nplm=M8661LL/B>
    Your title says "Can I use the Apple ADC to DVI adapter with a VGA monitor?". If you want to connect a VGA monitor to a computer's ADC port you need the ADC to VGA adapter
    <http://www.gefen.com/kvm/product.jsp?prod_id=1299> You can't use an ADC to DVI adapter followed by a DVI to VGA adapter, because the ADC to DVI adapter doesn't pass the analog video signals needed for VGA.

  • Can i use the trial version of Photoshop CS6 with Windows XP - if so, where can i download it?

    Can i use the trial version of Photoshop CS6 with Windows XP - if so, where can i download it?

    Hi,
    Yes you can, please check the minimum system requirements: System requirements | Photoshop
    Here is the download link for trail: Download CS6 products
    Thank You
    Arjun

  • Can I use the ac/usb charger that came with my iPad 4 for my Classic iPod 80GB?

    Can I use the ac/usb charger that came with my iPad 4 for my Classic iPod 80GB?  I think I can, but I'm too chicken to try. Thank you ahead of time,
    Mark

    Thanks for the quick reply.

  • How can I use the photos from iphoto to display in contacts?

    Contacts has a space for a photo.  At one time I knew how to populate this space with photos from iPhoto. Currently my choices are to use an icon or take a pic with the camera.
    How can I add the photos from iPhoto to the choices for populating the "Contacts" image space for individual cards?

    See this Discussion...
    https://discussions.apple.com/message/19082703#19082703

  • Can I use the HD from my prior HP PC as a 2d HD in the new one?

    I have a new HP Pavilion P7-1020, and i use windows 7, 64 bit. Can I take the HD from my prior HP PC, which also uses windows 7, 64 bit, and add it to my new PC as second HD?
    This question was solved.
    View Solution.

    Yes, you should be able to transfer the information/data from the old drive to the new drive before formatting it. transferring programs is a completely different story, however. Unless the program is just an".exe", it is unlikely that you will be able to just transfer it. Most programs have an installer that write files in many location on the drive and adds entries in the Windows registry. Without all these dependencies, the program won't run.
    Look for the purple box above the blue word "Kodus!" on the left hand side of the window. Click the white "star" in the purple box.
    Frank
    {------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
    Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
    This is a user supported forum. I am a volunteer and I don't work for HP.
    HP 15t-j100 (on loan from HP)
    HP 13 Split x2 (on loan from HP)
    HP Slate8 Pro (on loan from HP)
    HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
    HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
    HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
    HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
    HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

  • Can I use the RAM from my Edge E420s in my X120e?

    Hi there. Is it possible to transfer the 4GB of RAM from my water damaged E420s to my new X120e which are arriving monday?
    Thanks in advance!
    Solved!
    Go to Solution.

    you can use the ram from the X120e in the E420s.
    Regards,
    Jin Li
    May this year, be the year of 'DO'!
    I am a volunteer, and not a paid staff of Lenovo or Microsoft

  • How can i Use the symbols from the main html page?

    Hello!
    Im trying to find a solution for days!!
    i need to use my symbols from the html page, for example to hide the symbol i want to use: sym.$( "sym1" ).hide(); or to make it draggable (with jquery UI) i wanna use: sym.$( "sym1" ).draggable(); but it doesn't work.
    i know i can do the same from the edgeActions.js file and here is the working code:
          Symbol.bindElementAction(compId, symbolName, "document", "compositionReady", function(sym, e) {
             var ex1 = sym.$( "farmer" );
             //ex1.html( '<input type="text" />' );
             yepnope({
                 both: [
                     "libs/jquery-ui.min.js",
                     "libs/jquery-ui.css",
                 callback: function() {
             ( ex1 ).draggable();
    but the main problem is that it's always include this file as the very last .js, so in case Im trying to use the symbols from the index.html page (For example:  ( ex1 ).draggable();  ) the variables are undefined (because it read the html first)...
    Please Help, Im desperate..
    Thank you very much!!!
    Eran

    Hi, Eran-
    You will want to use the AdobeEdge.* APIs, which should give you access from external JavaScript into your Edge Animation.  The API document has information on that.  However, you will need to wait until the runtime loads, so you should use the bootstrapping method that is outlined in Josh Hatwich's post on our blog:
    http://blogs.adobe.com/edge/2012/05/15/bootstrapping-edge-compositions/
    Hope that helps!
    -Elaine

Maybe you are looking for