Can I use this device with my Yamaha receiver to connect to my IPhone/IPad?
Can I use the Apple airport express with my Yamaha stereo receiver to connect to our iPhone/IPad?
Yes, but normally the Express will not be working in isolation from wireless network and it is the whole network that will determine if it works or not.. I also assume you mean to connect using the audio out of the express not ethernet.
Similar Messages
-
I bought iPhone 4s device from the owner and the previous owner is not present and the device has already been erased, how can I use this device using my Apple ID and iCloud
Hello adilx
The only way to get passed that and to use that iPhone is to ask the previous owner to remove it from icloud.com in the Find my iPhone section.
Find My iPhone Activation Lock: Removing a device from a previous owner’s account
http://support.apple.com/kb/TS4515
If the previous owner is not present
Make sure the device is powered on and connected to a Wi-Fi or cellular network. Then contact the previous owner and ask them to follow these steps to remove the device from their account:
Sign in to their iCloud account at www.icloud.com/find.
Click All Devices to open a list of devices linked to their account, then select the device to be removed.
Click the Erase button to erase all content and settings from the device. When prompted, don't enter a phone number or message. Click Next until the device is erased.
When the erase is complete, click "Remove from Account" to remove the device from the account.
After the device is erased and removed from the account, you can proceed with the device setup process.
Regards,
-Norm G. -
Tried my k3772-z modem to connect macbook air to internet and got the message: you can't use this application with this version of mac os x. Is there a setting that needs to be changed?
I can't help you with a direct answer. For third-party devices you should contact the vendor (Vodafone).
If you have an iPhone (or an Android phone with hot-spot capability) you can use that to connect to the Internet without paying for a separate cellular service. -
I just purchased a 3TB Time Capsule. I live in Italy and have 220V power. The Time Capsule is rated for that, but the cord says 125V. Can I use this cord with an adapter, or do I need to buy a new cord at an Italian store?
Due to the kind of plug used the US power cord is rated at the 125v value.. and legally we cannot advise you to use on higher voltages.. although I have never had issues in Australia.. 240v.
But adapters from your Euro power plug to US are generally ugly .. unsightly things.. and often sit high above the socket and are none too stable.. I agree with Bob.. just go out and buy a standard figure 8 power cord.. check with Apple in Italy for a white one.. if you are going to have it on show.. black are far more common. Or even check ebay for a standard power Apple power cord as a number of items they sell use the figure8 socket. -
Once iPhone - phone plan is terminated, can I use this device as a iTouch?
Once iPhone - phone plan is terminated, can I use this device as a iTouch?
Yes. Look at the right panel under "More like this" and follow the links. At least one of them has a link to an Apple document that describes how to do it.
-
When I try to open my Address Book from Finder, it says :You can't use this version with this version of Mac OS x. I have Address Book 5.0.3 and Mac OS X 10.7.5 What should I do to get my Address Book back???
Unless you deleted Address Book 6, or restored from a backup made before you upgraded to Lion, Address Book 6 should be on your disk somewhere. Try to find it with spotlight or by browsing likely folders with Finder. Also check Trash. If you find other Address Books, using Quick View or Get Info in Finder should show the version number.
Have you ever moved Address Book out of the Applications folder, either before or after you upgraded to Lion?
If you can't figure out how this happened in the first place, I would be worried that other OS X utilities are similarly affected. -
Can I use headphones/headsets with my ipad3 because they arnt included in the ipad box so any of u used it and from where I can have them ?
Yes you can use earphones or earbuds. You can use iPhone or iPod earbuds and there are many other headphones that will work with the iPad - and bluetooth headphones wiill work as well.
-
HT4106 can you use this device to connect an external usb connection hard drive to the ipad?
I have an I pad and external hard drive which i want to be able to connect together.... is this the device i need?
You can't connect a USB HD using the camera connection kit.
There are some wireless external hard drives that can be used with the iPad.
The Kingston Wi-Drive, which costs $50 for the 16 Gigabyte, and then $30 more for every 16 gigs more. It works by you turning it on and then accessing the files on it from an app that you download on your iDevice. You can access music, movies, and other stuff. No connections or anything, it works like a WiFi connection, you connect to it from the setting on the iPad under wireless networks.
Then there is the Seagate GoFlex, which some would recommend over the Wi-Drive. But this one costs $199 and had 500 Gigabytes of storage. It works the sameway as the Kingston: no wires, runs over its wireless connection. You can actually fit up to 300 HD movies on it.
Another option:
Expand your iPad's storage capacity with HyperDrive
http://www.macworld.com/article/1153935/hyperdrive.html
On the road with a camera, an iPad, and a Hyperdrive
http://www.macworld.com/article/1160231/ipadhyperdrive.html
Cheers, Tom -
Can i use two devices with one itunes account?
I share a laptop with my husband. We have had "sync" issues in the past with his contacts and my contacts intermingling on our separate iPhones. Can I create two different iTunes accounts for us to sync independently? What should I do about this? With the advent of iCloud, we're both going to be autosyncing...right???
This won't be a problem, iTunes will see the new device as a separate device, it will have its own settings under iTunes, you can set it up to sync the same content or different content to the first device, it will have no effect on how the first device syncs with iTunes.
-
Can I use this printer with my macintosh SE?
I have a macintosh SE form 1986, i need a printer and i have found this one on a hardware shop near by at a very fair price:
Apple Color StyleWriter 2500.
Can I use it with my mac? Will be a problem the software with the 800K diskettes? In case this printer wont work, wich one you recommend?
Thanks in advance!
CarlosHello Carlos,
The Color StyleWriter and its CSW 2500 software requires a 68020 processor or higher. A Macintosh SE has a 68000 processor. So, unfortunately, the SE cannot be used here.
Instead, choose a black and white printer, such as a StyleWriter or StyleWriter II. For the SW II, use System 6.0.8 or 7.0 and the printer software below with an SE.
http://download.info.apple.com/Apple_Support_Area/Apple_Software_Updates/English -North_American/Macintosh/Printing/StyleWriter/StyleWriter_II_1.2.sea.bin
http://download.info.apple.com/Apple_Support_Area/Apple_Software_Updates/English -North_American/Macintosh/Printing/StyleWriter/StyleWriter_II_1.2_Info.txt
An appropriate old LaserWriter model can also be a good alternative (high print quality).
Jan -
I have an ipod shuffle - 3rd generation. Can you use these in cars? My car is a Hyundai i20 2o11 model and it has a usb connection. I connected my shuffle today but the car would not recognise it. Do I have to have a different type of ipod, eg nano or something?
Becaise the digitizer is broken in that area
Apple will exchange your iPod for a refurbished one for $199 for 64 GB 4G and $99 for the other 4Gs. They do not fix yours.
Apple - iPod Repair price
A third-party place like the following maybe less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Replace the screen yourself if you are up to it
iPod Touch Repair – iFixit -
I have a 8 slot PXI system with 2 NI PXI 6508 and 1 DMM 4070 in it. I want to get started with programming the digital I/O cards (6508)! How can I use this cards with LabView 7?what is the best way to get started, or where can I get examples showing how to use the several channels?
Thanks!
PhilippPhilipp,
The best way to get started is to decide if you want to use traditional NI-DAQ or NI-DAQmx. Recently we released NI-DAQ 7.1 which provides NI-DAQmx support for the PXI-6508. In my opinion, NI-DAQmx is more efficient and much easier to use.
To get started with examples, simply launch LabVIEW and go to Help>>Find Examples. Then expand Hardware Input and Output>>DAQmx and select the appropriate digital group for your application. This should help get you started.
Please repost if you need addition assistance. Good luck with your application! -
Can I use USB 3 with my 2.8Ghz Quad-core
I have an early 2008, 2.8 GHz Quad-Core Intel Xeon Mac Pro, can I use USB3 Devices with it?
Yes, they are all backward-compatible.
If you wnat USB-3 speed, you would need a PCIe card. -
Is there a way to get around the pop up, "this device is already associated with an Apple ID. You can download past purchases on this device with just one Apple ID every 90 days. This device can be used with another Apple ID in 13 days."Someonehelp please!
What exactly are you trying to do?
-
When I try to download a library book on my Kobo reader, I keep getting this message. First it tells me to change the computer's authorization to be associated with an Adobe ID. When I click on authorize after logging in, the message keeps telling my "you can only authorize this computer with an Adobe ID that hasn't been previously used to authorize any other computer or mobile device. I have no idea what this means. Help!
Sometimes ADE gets its registration/activation confused and in a semi-authorized state.
Uninstalling and reinstalling does not help, and indeed installation can even trigger this state.
Unfortunately, it often then gives misleading error messages about what is wrong.
A common incorrect message informs you that the ID is already in use on another computer and cannot be reused.
Another is "E_AUTH_NOT_READY"
This can often be resolved by completely removing any authorization using ctrl-shift-D to the Library screen on ADE (cmd-shift-D if on Mac).
Restart ADE, and then reauthorize with your (old) Adobe ID.
In extreme cases on the mac, the following extra step has helped some people. Navigate to /Users//Library/Application Support/Adobe/Digital Editions and drag the activation.dat file to the trash. If you are using 10.7, see Access hidden user library files | Mac OS 10.7 Lion. http://forums.adobe.com/thread/1265248?tstart=0
Maybe you are looking for
-
How to convert from Finder Object reference to POSIX path
I'm new to AppleScript. I'm super close to getting what I need done, but I've ran across a snag in the middle. The error I'm getting is Can’t make quoted form of POSIX path of item 1 of {«class docf» \"filename\" of «class cfol» \"foldername\" of «cl
-
Installing Windows 7 64 bit on Macbook pro 13"
I have a Macbook Pro 13" 2010 version and I would like to install W7 64 bit. My parents accidentally threw away the CD's that came with my Macbook Pro. Could I install Windows 7 without the Cd? Thanks.
-
Camera Raw 4_3_1, images not opening
After a photo shoot yesterday our photographer suggested I download Camera Raw_4_3_1 so we could load his camera settings when adjusting the files in raw format. I tried doing that today and when I opened Bridge CS3/Browse, the Camera Raw optionis no
-
Apple gives an error signal saying that I need to be an adminstrator to make changes to all the users...there is only one adminstrator account and one guest account.
-
Workflow task process participants in serial order: how to make it stop at first rejection
I have listed 3 participants as task process participants in serial order on my approval process. Currently even if the first one rejects, it moves on to the next one and then next no matter if they reject or approve it. The final outcome is rejected