Can I use 'tone ringback alert-no-pi" to gernerate ringback to FXS?

I am using 2611 as voice gateway with VIC-2FXS.
Phone - 2611 ---IP network--- 5350 --PRI-- ISDN SWITCH
Because the ISDN switch don't send the in-band ringback and Progress Indicator to the 5350, so I want to generate the ringback on the Cisco Voice gateway 2611, but when I configure the 'tone ringback alert-no-pi' on 2611 pots/voip dial-peer, It can't generate the ringback yet, so can I use 'tone ringback alert-no-pi' to gernerate ringback to FXS, or just only for the ISDN interface?

We can use 'tone ringback alert-no-pi'command to generate ringback to the FXS.Refer to this link to troubleshoot your problem:
http://www.cisco.com/warp/public/788/voip/ringback.html#voipcalls

Similar Messages

  • How can i use a ringtone file as an alert? ( New mail, Text tone )

    I got a file i want to use as an alert tone for New mail, but it is a .m4r file. I want to use it as a New Mail sound. But when i tried to use it, it just uses the previous alert tone i had selected.. Spell.

    I understand, where did you try changing it? In the Settings > Sounds?
    Try changing it here:
    Settings > Notifications > Mail > select the mail account > New Mail Sound

  • How can i use a song as a ring tone from a cd i have loaded on the 4s

    How can i use a song as a ringtone from  a cd i have loaded on my iphone 4s

    The weird thing is, when u make your own ringtones, they sound terrible when set as a ringtone (really tiny and generally awful), but when u set them as a text tone or any other alert they sound great (like they do when u play them through the music app).
    Is this just a bug with iOS5 or have previous models also done this?

  • Can only hear the phone ring - no tones for alerts

    I own a 4S and recently the only sound that seems to work is the ringer and Siri. All the tones for alerts will not play through the speaker. I have tested them using headphones and I can here them fine. I have checked the volume and it appears to be fine. I have read aobut the possibility that my headphone jack is messed up but when I go to turn up the volume without the headphone it dones not indicate that headphones are plugged in.
    I have reset the unit and still am having issues.

    Omy... When you initially start setup a phone after resetting it, it will ask you if you want to set it up as a new phone or use one of the user profiles from the saved backups. If I am using the wrong verbage, excuse me. Again, the phone is NOT jail broken, so please allow this to serve as one less conspiracy theory you may have in your mind. It is currently on ios 6.1.3. No frills, no spills. Nothing up my sleeves.
    I am trying to fix my daughters phone for her and am looking for some friendly assistance. If you can't help me, thank you for your time and I hope some one else will gladly assist me.

  • I can't get the AirPlay alert to stay off my Apple TV. I'm using AirPlay so it's not trying to connect. It's an alert that tells me what AirPlay is. Anyone know how to get rid of this?

    I can't get the AirPlay alert to stay off my Apple TV. I'm using AirPlay so it's not trying to connect. It's an alert that tells me what AirPlay is. Anyone know how to get rid of this?

    Welcome to the Apple Community.
    Settings > AirPlay > Conference Room Display > Off.

  • When can I use ALERTS

    Hi All,
    I have small doubt which was asked by my client,
    How and when are the alerts can be used... I know how to use these alerts in BPM...
    But my question is Can the ALERTS can be used in Normal scenarios i.e not BPM... lets say 1:N mapping without BPM ... can I use ALERT if an error occurs in Message Mapping in 1: N without BPM..
    Please give your valuable suggestions...
    Thanks and Regards,
    sirhdar reddy

    to triger an alert inside a UDF chdck with the blog
    <a href="/people/bhavesh.kantilal/blog/2006/07/25/triggering-xi-alerts-from-a-user-defined-function:///people/bhavesh.kantilal/blog/2006/07/25/triggering-xi-alerts-from-a-user-defined-function
    and for config of alerts:
    <a href="/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step: Alerts - Step by step</a>

  • Hi Guys does anyone know of a way i can get cyclops speed camera alert to work through bluetooth incar hands free kit , i used to be able to connect it via an app called drivesafely but this app is no longer available in apple store ????????????

    Hi Guys does anyone know of a way i can get cyclops speed camera alert to work through bluetooth incar hands free kit , i used to be able to connect it via an app called drivesafely but this app is no longer available in apple store ????????????

    I think the easiest way to do this is to have the EyeTV app running in one user account and sent via HDMI to the TV, and use a separate user account for Screen Sharing. Both logins can be active at the same time and with Lion you can connect via screen sharing to which ever login you need.
    With regards to the Mac video resolution changing, when it is not the current input on your AV receiver. This is 'normal', if the Mac sees no signal it drops down the a lower level. What you need is to buy a HDMI Detective Plus which tricks the Mac in to always seeing a signal and hence it will not drop down the resolution. See http://www.gefen.com/kvm/dproduct.jsp?prod_id=8005
    The Mac mini does have an IR receiver. This can be used with the EyeTV app, iTunes, and similar. Yes I believe EyeTV would run for prolonged periods quite happily, it is has been around for a long time and had most of the rough edges polished off. However one issue you will have to deal with is that it does not automatically update its program guide data. For this you might have to write or modify an AppleScript. Elgato support or their user forums will be a lot of help.
    You can set EyeTV to convert recordings to an iTunes (Apple TV) compatible format and then delete them from EyeTV.
    The HDMI Detective should solve your handshaking problems.

  • Can I use alert on chats in WEB- I

    HI team ,
    Can I use alert on chats in WEB- I , as I want to show negative value in RED and +ve values in green , as this is not possible setting palate colure.
    Your help is welcome.
    Thanks
    Regards,
    Ashutosh D

    Hello!
    u can very well define alert in web i report.
    Click on alerters symbol (on reporting toolbar)..click on New
    define your alerter condition.
    and press ok
    Regards
    khyati

  • I used the location app to find my daughters ipod with my ipad mini.  App worked great, but now I can't use my ipad, can't get rid of the alerte "ipod located".  Now what do I do

    I used the location app to find my daughters ipod with my ipad mini.  App worked great, but now I can't use my ipad, can't get rid of the alerte "ipod located".  Now what do I do

    Try a reset:
    Hold the Sleep and Home button down for about 10 second until you see the Apple logo.

  • I have OS 10.9.4, and I can't change the basso alert sound for Reminders.  Works ok for the rest of the applications that use an alert sound.  Help?

    I have OS 10.9.4, and I can't change the basso alert sound for Reminders.  Works ok for the rest of the applications that use an alert sound.  Help?

    http://www.microsoft.com/mac/support
    http://answers.microsoft.com/en-us/mac/forum/macword?auth=1
    http://answers.microsoft.com/en-us/mac/forum/macoffice2011-macword/microsoft-wor d-for-mac-2011-will-not-open-error/ecc42616-6f49-40bb-b8f5-e21c711ea359

  • How can i use my music as a ringing tone??

    how can i use my music as a ringing tone??

    I came across a GREAT program: iRinger.net. It's a free download and really easy (and Fun) to use!
    I recommend watching the Instructional Video on the homepage that shows you exactly how to use it. Basically, you upload a song to the program, edit any portion of it that you like to a 40 second or less tone, then export it to iTunes. When you sync your phone w/ iTunes, it gets saved along with the rest of your ringtones. I had a blast last night creating about a dozen or so!
    =)

  • How can we use Alert with Canvas

    Hello to all
    How can I use alert with Canvas .
    I want whenever user do mistake then a alert message should come.
    Thanks in advance
    Mukund

    And where is the problem? Sample code can be found all over the place... just look for it.

  • Can i use HTML coding in oracle alerts

    Hi,
    I have a doubt in oracle alerts.
    can i use html coding in oracle alerts.
    If so can anyone please help me out this.
    Thankig you,
    Regards,
    RR

    hi vingorius ,
    No you cant include html but u can use variables
    To add a variable in a text message to provide context for the iBot attachment
    1. Click the following option:
    If sent as attachment, include this text
    2. Type the text into the text box with a session variable, a repository variable, or a presentation variable using the syntax shown in the following table:
    Variable Type
    Syntax
    Repository @{Variable_Name}
    Session @{NQ_SESSION.Variable_Name}
    Presentation @{Variable_Name}
    For example, Dear, @{NQ_SESSION.Variable_Name}, here is your personalized Weekly Sales Territory Update.
    NOTE: If you want to use the @ character, you need to precede it with the \ (back slash) character to separate it from the variable syntax. For example, Dear @{NQ_SESSION.DISPLAYNAME}, \@ New York, appears as Dear Joe Smith, @ New York.
    Source : BI Guide
    Thanks,
    Saichand.v

  • Can i use one of my songs in I tunes as a ring tone and how do I do that?

    Can I use one of my songs in  ITunes as a ringtone on my I phone?  How do I transfer?

    Turn Any MP3 into an iPhone Ringtone

  • Can I share ring tones or alert tones purchased from iTunes between mobile devices?

    Does anyone know if there is a way to share ring tones or alert tones purchased from iTunes between mobile devices?  I purchased them on my iPhone and they come up on my computer but I cannot transfer them to my iPad.  Is it possible to share them between mobile devices like any other song?

    If you just want to select the whole song as your ringtone (without cutting out the best part) go to your computer and check were the file is saved. When found create a copy of it and rename its extension from m4a to m4r. Now drag&drop that file into itunes and there is your ringtone

Maybe you are looking for