Can I use User Exit u2013 IWOC0004 u2013 Change Single-Level List for TCODE IW37N?

Hi All,
Can I use User Exit u2013 IWOC0004 u2013 Change Single-Level List for TCODE IW37N?
In documentation of the User Exit I can see that I can use this user Exit for IW37(Program - RIAFVC20) , but I want to use this for IW37N (RIH_ORDER_OPERATION_LIST).
Please tell me is it possible.
With best regards,
Narendra

Hi Pete Sir,
I am on 4.7 , how to work with it. I am going to use screen exit IW0110018 and I want to add User fields in the IW37N.
Thanks with best regards,
Narendra

Similar Messages

Can i use user exits

Hi,
Can anybody tell me if i can use user exits for not applying cost centre fields for Assets and liabilites gl a/c when we post transcations in fb60 0r fb50 f-22 etc
warm regards
Manjunath

hi Manjunath,
you can try to set up a substitution and see if it is working. On the other hand P/L accounts must have a CO object by posting, of course cost center is just one option.
ec

Creating delivery, can I check the sales order's field using user-exit or ?

Hi dear.
When I create a delivery in VL01N or other transactions, I want automatically to check the sales order's some field and to decide whether create or not.
Can I use user-exit for that?
Or other solutions is there?
Thanks regards

Yes your requirement can be achieved thru a User Exit.
There are many User Exits available in Delivery as listed in the link below:
https://wiki.sdn.sap.com/wiki/display/ERPLO/SDUserexits
The selection of necessary User Exit is based on your specific requirement.
Also if you want to check some feild of Sales Order whether it is completed or not, then you can also use Incompletion Procedure in Sales Order, which will make sure that no Sales Order is saved until the end-user enter data in those feilds.
Hope this helps...
Thanks,
Jignesh Mehta

Geography based industry scenario which can be implemented using user exit

Hi All,
I am searching for a geography based industry scenario which can be implemented using user exit strategy.
Please let me know me if anyone knows about any such scenario.
Thanks & Regards,
Pranjali.

Hi Amith,
IDOC configured throgh CHANGE pointers.So no need to worry about IDOCS and all.My work was trigger idocs by user exits.Wen ever i change venodr no.. idocs shoud be triger.
Now my question was Insted of going transaction( from there we can go to debuging mode) i want to check this Exit by RBDMIDOC programe(ofter excute this programe and give Message type as CREMAS,from there i want to go debugging mode).
Just now i checked,i put breakpoint in Include programe(INCLUDE ZXF05U01) and excute from XK01,it goes to debuging mode,so its fine.But i want triger from RBDMIDOC programe.Ofter excute RBDMIDOC programe,we can enter CREMAS.From there i want to go debuging mode.
Pls help me,
Thanks

Can't find user exit or enhancement at RGJVBR15

Hi everyone,
I need your help guys. Right now,i'm developed sapscript for billing statement (cash call and expenditure). I have finished the form but i have problem at print program RGJVBR15. This print program is called by RGJVBR10 (Tcode : GJ14 --> Hard Copy Billing).GJ 12 and GJ 13 is used to extract data that will be used by forms.
There is statement like this in RGJVBR15 at subroutine CREATE_EXPENDITURE (Line 1421 in include file RGJBF_I1) :
AT NEW C5_CURR. --> Group by funding currency
   PERFORM POPULATE_SPOOL_ID
ENDAT.
PERFORM F6100_PROC_... -> This will be used to open form,write form (sapscript)
AT END OF C5_CURR.
ENDAT.
The problem is that i want to change this logic. I want to change the standard logic (display report group by funding currency), i want to ignore this and instead using group currency. So there only one report produced with one currency only (if using standard logic there is more than 1 report based on funding currency). But i can't find user exit or enhancement in this SAP Standard Program. Is anyone know if there is user exit or enhancement in this program? I don't want to use implicit enhancement because it's will produce problem when client want to upgrade their system. Thank you.
Best Regards,
Satria

hi,
for tcode GJ14 user exits avaliables are
Exit Name           Description
JVA-IM-1             Joint Venture: Integration Manager Set Intercompany Lines
JVA_IM_2            User Exit Splitting
JVA_IM_3            User Exit Check Document
regards,
paras

Change gl account in MIGO by using user exit

Dear all,
Could you tell me how to use user exit to change the gl account in MIGO?
I have searched in SDN and found some code.
In user exit: MBCF0002 ( EXIT_SAPMM07M_001 ).
FIELD-SYMBOLS <F2> TYPE ANY."Field Symbol for the GL ACCOUNT
DATA : W_KONTO_NAME(50) VALUE '(SAPMM07M)DM07M-KONTO'.
ASSIGN (W_KONTO_NAME) TO <F2>.
MOVE "GLACCOUNT" TO <F2>.
"GLACCOUNT" is the new GL account you want to change.
but thecode doesn't work, it can not change the BSEG-HKONT.
Could you help me solve this problem?
Many thanks
Message was edited by:
        Chen Zhonghua

USER EXIT
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sapgenie.com/abap/code/abap26.htm
http://www.sap-img.com/abap/what-is-user-exits.htm
http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
http://www.easymarketplace.de/userexit.php
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sappoint.com/abap/userexit.pdfUser-Exit
http://www.sap-img.com/ab038.htm
http://help.sap.com/saphelp_46c/helpdata/en/64/72369adc56d11195100060b03c6b76/frameset.htm
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sap-img.com/abap/what-is-user-exits.htm
http://expertanswercenter.techtarget.com/eac/knowledgebaseAnswer/0,295199,sid63_gci982756,00.html
Transaction Code - MIGO                     Goods Movement
Exit Name           Description
MBCF0002            Customer function exit: Segment text in material doc. item
MBCF0005            Material document item for goods receipt/issue slip
MBCF0006            Customer function for WBS element
MBCF0007            Customer function exit: Updating a reservation
MBCF0009            Filling the storage location field
MBCF0010            Customer exit: Create reservation BAPI_RESERVATION_CREATE1
MBCF0011            Read from RESB and RKPF for print list in MB26
MB_CF001            Customer Function Exit in the Case of Updating a Mat. Doc.
No of Exits:          8
Rewards if useful.........
Minal

Change AP Recon account in MIRO by using user exit

Hi All,
When using MIRO, I want to change the AP Recon. account, is there any user exit that can realize this requirement?
Thank you in advance

Transaction Code - MIRO                     Enter Incoming Invoice
Exit Name           Description
LMR1M001            User exits in Logistics Invoice Verification
LMR1M002            Account grouping for GR/IR account maintenance
LMR1M003            Number assignment in Logistics Invoice Verification
LMR1M004            Logistics Invoice Verification: item text for follow-on docs
LMR1M005            Logistics Inv. Verification: Release Parked Doc. for Posting
LMR1M006            Logistics Invoice Verification: Process XML Invoice
MRMH0001            Logistics Invoice Verification: ERS procedure
MRMH0002            Logistics Invoice Verification: EDI inbound
MRMH0003            Logistics Invoice Verification: Revaluation/RAP
MRMN0001            Message output and creation: Logistics Invoice Verification
No of Exits:         10
USER EXIT
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sapgenie.com/abap/code/abap26.htm
http://www.sap-img.com/abap/what-is-user-exits.htm
http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
http://www.easymarketplace.de/userexit.php
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sappoint.com/abap/userexit.pdfUser-Exit
http://www.sap-img.com/ab038.htm
http://help.sap.com/saphelp_46c/helpdata/en/64/72369adc56d11195100060b03c6b76/frameset.htm
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sap-img.com/abap/what-is-user-exits.htm
http://expertanswercenter.techtarget.com/eac/knowledgebaseAnswer/0,295199,sid63_gci982756,00.html
Rewards if useful.........
Minal

How to use User exit for MM_MATBEL

Hi
I want to exclude some material documents while archiving a range of material document through archive Object MM_MATBEL.
Can you please suggest how to use user exit for this to exclude the material document while archiving.
Please brief me details.
Thanks,
Debadatta

Hi Debadatta,
Welcome to SDN.
Have you looked report program <b>RM07MAAU</b> (Report for Material Document Archiving)?
Hope this will help.
Regards,
Ferry Lianto

VARIABLES USING USER EXIT

Hi,
I am trying to populate a fiscal year period (from and to) dynamically using a user exit variable. The fiscal year selection is for data slicing at the planning area.
Anyone has an idea of how I can achieve this ? Some function module lines will be appreciated.
Regards,
uche

Hi Uchenna,
i don't clearly understand your scenario, but i there's a great HOWTO for user exit variable. If you specify your mail i can send you.
However i have created an user exit var filled with the entries on a customer table, follows the code:
FUNCTION z_sem_bps_slice_comp.
""Interfaccia locale:
*" IMPORTING
*"     REFERENCE(I_AREA) TYPE UPC_Y_AREA
*"     REFERENCE(I_VARIABLE) TYPE UPC_Y_VARIABLE
*"     REFERENCE(I_CHANM) TYPE UPC_Y_CHANM
*"     REFERENCE(ITO_CHANM) TYPE UPC_YTO_CHA
*" EXPORTING
*"     REFERENCE(ETO_CHARSEL) TYPE UPC_YTO_CHARSEL
CONSTANTS:
*l_source_var TYPE upc_y_variable VALUE 'SOURCE',
*l_source_area TYPE upc_y_area VALUE '4PERF001',
l_use_restricted_values TYPE boole-boole VALUE ' ',
l_buffer_call TYPE boole-boole VALUE 'X'.
DATA:
l_type LIKE upc_var-vartype,
lto_varsel_all TYPE upc_yto_charsel,
lto_varsel TYPE upc_yto_charsel,
lto_var TYPE upc_yto_charsel,
lto_chanm TYPE upc_yto_cha,
z_noslice(1) TYPE n.
BREAK-POINT.
DATA: ls_varsel TYPE upc_ys_charsel,
        lt_chavl TYPE STANDARD TABLE OF zcompslice,
        ls_chavl TYPE zcompslice.
HERE I FILL LT_CHAVL WITH THE VALUE IN THE CUSTOMER TABLE
CLEAR:lt_chavl,ls_chavl,z_noslice.
REFRESH:lt_chavl.
SELECT zsocieta FROM zcompslice INTO TABLE lt_chavl
WHERE zflag = 'X'.
IF sy-subrc <> 0.
    z_noslice = 1.
ENDIF.
HERE YOU FILL THE "USER EXIT VAR" WITH PROPER VALUE EXTRACTED ABOVE, LT_VARSEL IS THE TABLE FOR THE OUTPUT VALUE OF THE USER EXIT VARIABLE
IF z_noslice EQ 1.
    ls_varsel-seqno = '0000'.
    ls_varsel-chanm = '0COMP_CODE'.
    ls_varsel-opt = 'EQ'.
    ls_varsel-sign = 'I'.
    ls_varsel-low = '#'.
    APPEND ls_varsel TO eto_charsel.
ELSE.
    ls_varsel-seqno = '0000'.
    ls_varsel-chanm = '0COMP_CODE'.
    ls_varsel-opt = 'EQ'.
    ls_varsel-sign = 'I'.
    LOOP AT lt_chavl INTO ls_chavl.
      ls_varsel-seqno = ls_varsel-seqno + 1.
      ls_varsel-low = ls_chavl-zsocieta.
      APPEND ls_varsel TO eto_charsel.
    ENDLOOP.
ENDIF.
ENDFUNCTION.
Hope it helps
Fabio

Using user exit. ( LVMPTZZ, LVKMPFZ1). used in Credit Management

Hi
How to find using user exit. ( LVMPTZZ, LVKMPFZ1). used in Credit Management .
Plz provide path
Regards
Rohit

Hi,
You can find exits through transactions# SMOD & CMOD also.
Regards
Chandra

How to use User Exit for SD...

Hi there,
My client's requirement is to block the overall status of the Sales Order header under status tab to be blocked when user r-enters a new scheduled date in the "First Date" column in the SO.
When they goto VA02, & put a new date it must automatically put a delivery block in the header as well as make the order header status to be blocked.
I see the First date field in the SO is in a Structure RV45A, the field name is ETDAT.
Can you let me know how to use User exit MV45AFZZ?
When doing it, it must put the Delivery block in table VBAK LIFSK.
Rgds,
Pri

Hi Debadatta,
Welcome to SDN.
Have you looked report program <b>RM07MAAU</b> (Report for Material Document Archiving)?
Hope this will help.
Regards,
Ferry Lianto

Triggering workflow using user-exits

Hi all,
can anyone tel me how a workflow can be triggered using user-exits??
thanks in advance

Call function module SAP_WAPI_CREATE_EVENT (with COMMIT_WORK = space) to create an event, and use the event to start your workflow (triggering event). Alternatively, you can start the workflow directly using the corresponding SAP_WAPI function module for that purpose. My recommendation is that you normally don't start workflows directly as it is a less flexible solution (or you have to build that flexibility yourself instead of using what you get for free with triggering events).
However, why are you asking this question? I started wondering after seeing you ask an almost identical question in [another thread|Triggering Workflow Using BADI; here.

How can I use User-Defined Aggregate Functions in Timesten 11? such as ODCI

Hi
we are using Timesten 11 version and as per the documentation, it doesn't support User-Defined Aggregate Functions.
So we are looking for alternatives to do it. Could you please provide your expert voice on this.
Thanks a lot.
As the following:
create or replace type strcat_type as object (
cat_string varchar2(32767),
static function ODCIAggregateInitialize(cs_ctx In Out strcat_type) return number,
member function ODCIAggregateIterate(self In Out strcat_type,value in varchar2) return number,
member function ODCIAggregateMerge(self In Out strcat_type,ctx2 In Out strcat_type) return number,
member function ODCIAggregateTerminate(self In Out strcat_type,returnValue Out varchar2,flags in number) return
number
How can I use User-Defined Aggregate Functions in Timesten 11? such as ODCIAggregateInitialize ?

Dear user6258915,
You absolutely right, TimesTen doesnt support object types (http://docs.oracle.com/cd/E13085_01/doc/timesten.1121/e13076/plsqldiffs.htm) and User-Defined Aggregate Functions.
Is it crucial for your application? Could you rewrite this functionality by using standart SQL or PL/SQL?
Best regards,
Gennady

In Oracle, Can i use if exits clause in a query?

In Oracle, Can i use if exits clause in a query?
For example, "Drop table if exists tablename"
Is the above command valid in oracle?
If not then is there any equivalent for if exists clause?

Here is the SP code code that might help you to Drop a table if it exisit, whith out throwing an error if the table is not present.
create or replace PROCEDURE DROP_TABLE(TabName in Varchar2)
IS
temp number:=0;
tes VARCHAR2 (200) := TabName;
drp_stmt VARCHAR2 (200):=null;
BEGIN
select count(*) into temp from user_tables where TABLE_NAME = tes ;
if temp =1 then
drp_stmt := 'Drop Table '||tes;
EXECUTE IMMEDIATE drp_stmt;
end if;
EXCEPTION
WHEN OTHERS THEN
raise_application_error(-20001,'An error was encountered - '||SQLCODE||' -ERROR- '||SQLERRM);
END DROP_TABLE;
Call this SP in your Scripts by : CALL DROP_TABLE ('<Table Name>')
Hope this Helps!
Regards,
Kaarthiik

How to update old records of LIPS used user exit MV50AFZ1

To All Experts,
I have used User Exit MV50AFZ1 and in this user exit i updated the fields
USEREXIT_MOVE_FIELD_TO_LIPS.
LIPS-ETENR = VBEP-ETENR.
Its working fine for new VL0N1 t-code, but what about old recods of LIPS table ?
How to update old records ? Pl. guide me.
Yusuf

Hi Yusuf,
See SAP Note 415716 - User exits in delivery processing, it explain how these userexits work and cautions that you must have.
Regards
Eduardo

Can I use User Exit u2013 IWOC0004 u2013 Change Single-Level List for TCODE IW37N?

Similar Messages

Maybe you are looking for