Can I view the smart board display on an iPad

My daughter is vsually challenged and is not able to read the teachers notes on the smartboard. It is my hope that I can assist the school in setting up a link between the ipad and the smartboard so that my daughter can view the smart board display on her ipad. In this way she would hopefully be able to see what the rest of hte class sees and would have the option to pinch and zoom, etc. Any guideance in trying to solve this problem would be appreciated.
I have read many articles on how to mirror the ipad on the smartboard or control the smartboard from the ipad but that is not my intent. I would invision that my daughters ipad would simply be a duplicate screen of what the teacher places on the board. It could be the teachers handwritten notes, a document, a picture, or a movie....
I look forward to any suggestions.

Different smartboards work differently. I suspect your fastest route to finding any answers is to find out what smartboard system the school is using and contact the manufacturers.

Similar Messages

Is there a way of connecting the ipad to the smart board in the classroom, so that the smartboard is the control, and the ipad is displaying what is on the smartboard? This is to help a visually impaired child see what is on the smartboard.,

Is there a way of connecting the ipad to the smart board in the classroom, so that the smartboard is the control, and the ipad is displaying what is on the smartboard? This is to help a visually impaired child see what is on the smartboard.

Absolutely!
Install Splashtop2 on the PC and enable it to be controlled or ran from iPad or Reflection to simply allow iPad to serve as PC unwired monitor. With Splashtop and an Apple TV connected, you use the smartboard as usual, yet the PC and iPad can see the same content. The impaired child can even interact with the Smart Board via the iPad as if he were writing directly on the big screen. Erasing functions can be done by touching the Smart Board manual controls. Several variables are in play that cause this lack of functionality:
    Apple won't permit PC software that infringes its proprietary apps.
    Smart Board companies refuse to develop iPad apps because they feel threatened and are being replaced by iPads
    School districts think Apple TV is meant for copyright infringement and could expose them to safe harbor lawsuits
    Network administrators make it impossible to login Apple TVs because they don't want the streaming occurring
    Classrooms are not able to keep up with the technology of using the iPad
    Clicker companies refuse to play with iPad because they see it as a potential threat to their core business clients
    Apple is not working as hard as it could to exploit its capabilities in education, thus losing money in iPad sales
The bottom line is that we educators and technology developers are hurting our childern with petty conflicts.

How can I view the contents of a free trial for adobe fireworks cs6 on mac

how can I view the contents of a free trial for adobe fireworks cs6 on mac.
My friend told me to find the application in finder then hit control and click it and then it should give you the option to click
"view package contents"
This was not the case
please help thank you

When posting in Apple Communties/Forums/Message Boards.......It would help us to know which iMac model you have, which OS & version you're using, how much RAM, etc. You can have this info displayed on the bottom of every post by completing your system profile and filling in the information asked for.
CLICKY CLICK---> https://discussions.apple.com/docs/DOC-3602
CLICKY CLICK-----> Help us to help you on these forums

How can I view the size of a particular event in iPhoto '11?

How can I view the size of a particular event in iPhoto '11? The 'Get Info' option is not displaying the size of the event like it used to in iPhoto 8.

But the event does not really have a size - you can export the photos and make the size pretty much what you want - while it is in iPhoto it is an event
I guess that iPhoto could report the size of the original photos as imported - or the size of the modified photos if exported as JPEGs - or the size of the modified photos if exported with a maximum dimension of 1080 - but the event simply is photos and does not have a "size" until you export it
Obviously you want to know the size but the question was
what is your puprose for knowing the size?
WIth that information maybe there is a way to get you what you want
But the basic answer is simply that an event does not have a size - an event is a collection of photos and each photo has either two or three versions in the iPhoto library and each photo can be exported for outside use in several formats and at any size
LN

After downloading a pdf from a website, how can I view the file in Safari 6.0.4 (just as I can in Safari 5.0.6)? I bet that it's simple, but I've missed something, somewhere, and a solution will be greatly appreciated.

After downloading a pdf from a website, how can I view the file in Safari 6.0.4 (just as I can in Safari 5.0.6)? I bet that it's simple, but I've missed something, somewhere, and a solution will be greatly appreciated.

Hello Kirk,
Thank's for your efforts, and I just wish that this was the solution. Unfortunately, it isn't because, after double-clicking on the pdf in the website, it simply "opens" in another Safari window as a black screen - the pdf is there, somewhere, but not visible (either as an icon, or as a document).
When I right-click in the black Safari window, where the file is supposed to be, the only option available to display the file is to "Open file in Internet Explorer" (which is not what I want to do). Other options include saving or printing the pdf, which I don't want until I've confirmed that it's the form that I want. The same options are offered if I right-click on the file icon in the website.
Any other suggestions, please?

How can i view the variables of the session memory

Hi experts
How can i view the variables of the session memory.Such as I want display the variables of memory which id is 'BULRN' in ABAP debug.
In program i can use import from memory id visit the momery of session,but i don't know the name of variables which store in momery of my session.

Its not possible to view in the debug mode..
SAP memory is a memory area to which all main sessions within a SAPgui have access. You can use SAP memory either to pass data from one program to another within a session, or to pass data from one session to another. Application programs that use SAP memory must do so using SPA/GPA parameters (also known as SET/GET parameters). These parameters can be set either for a particular user or for a particular program using the SET PARAMETER statement. Other ABAP programs can then retrieve the set parameters using the GET PARAMETER statement. The most frequent use of SPA/GPA parameters is to fill input fields on screens
SAP global memory retains field value through out session.
set parameter id 'MAT' field v_matnr.
get parameter id 'MAT' field v_matnr.
They are stored in table TPARA.
ABAP memory is a memory area that all ABAP programs within the same internal session can access using the EXPORT and IMPORT statements. Data within this area remains intact during a whole sequence of program calls. To pass data
to a program which you are calling, the data needs to be placed in ABAP memory before the call is made. The internal session of the called program then replaces that of the calling program. The program called can then read from the ABAP memory. If control is then returned to the program which made the initial call, the same process operates in reverse.
ABAP memory is temporary and values are retained in same LUW.
export itab to memory id 'TEST'.
import itab from memory Id 'TEST'.
Here itab should be declared of same type and length.

Is normal when i connect to wifi i can't view the bb icon whoever that i can browser the internet normally

is normal when i connect to wifi i can't view the bb icon whoever that i can browser the internet normally, i have bb curve 9360

Hi and Welcome to the Community!!
It might be normal...I've heard (while rare) of some carriers preventing their BB users from using BB-proprietary services via WiFi. But, with a strong carrier network signal (e.g., not WiFi), I do suggest the following steps, in order, even if they seem redundant to what you have already tried (steps 1 and 2 each should result in a message coming to your BB...please wait for that before proceeding to the next step):
1) Register HRT
KB00510 How to register a BlackBerry smartphone with the wireless network
Please wait for one "registration" message to arrive to your Messages app
2) Resend Service Books
KB02830 Send the service books for the BlackBerry Internet Service
Please wait for "Activation" Messages, one per already configured email account, to arrive in your Messages. If you have no already configured email accounts, please wait 1 hour.
3) Batt Pull Reboot
With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes. See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
Hopefully that will get things going again for you! If not, then you should contact your mobile service provider for formal support.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

How can I view the Firefox Reading List?

I am running Firefox on Android 2.3.4. I am reading about the Firefox "Reader Mode" [1], which states:
"By tapping the readinglist1 icon, you can add the current page to your reading list (a special folder in your bookmarks list)"
"Note: The reading list folder will not be shown until the first item is added to the list. If all the items in the list are removed, the reading list will be hidden again."
Once I add the current page to my reading list, the screen changes and I am presented with different navigation controls. From here, the documentation says that:
"By tapping the readinglist2 icon, you can display the reading list. "
I have several items in my Reading List. However, I can only see the 'readinglist2' icon when I am viewing a page which has been converted to the Reader Mode. If I browse my bookmarks I do not see a folder for the reading list.
How can I view the items which I added to my "Reading List"?
[1] https://support.mozilla.org/en-US/kb/how-enable-reader-mode-firefox-android?fpa=1

You can open any chrome file in Firefox via the location bar, provided you know the path.<br />
XML (XUL) files need a view-source: prefix.
chrome://browser/skin/browser.css
chrome://browser/content/browser.css
resource:///defaults/pref/firefox.js
resource:///greprefs.js

How can I drop the key board from my calendar. The normal lower right key stopped working

How can I drop the key board from my calendar? The normal lower right key stopped working.

You can install this extension to make it easier to edit userChrome.css:
* ChromEdit Plus: http://webdesigns.ms11.net/chromeditp.html
The file needs to have this code:
<pre><nowiki>@namespace url("http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul"); /* only needed once */
#personal-bookmarks #bookmarks-menu-button { display:none !important; }</nowiki></pre>
You can reach the profile folder this way:
*Help > Troubleshooting Information > Profile Directory: Open Containing Folder
The file userChrome.css needs to be in the chrome folder in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder], so if the chrome folder is missing then you need to create a folder with the name chrome.

Getting the smart board to work with the iPad mini

I currently only have access to a mini for personally and for the classroom. I used to have access to an iPad 2. Now they both could have the smart software and I use a smart board regularly. However when I plug the mini into the board using the lightning to VGA it tells me hardware not supported. Now how am I supposed to use the software that is supported if the mini can not plug into the smart board itself? Several other educators tell me the mini is supposed to work with it so we are now confused. Is my device glitches? I've take it to the store but because the stores do not have smart boards on the premises to test with the device they an not solve. Is there anyone else aware of this issue that has found a solve?

Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
 Cheers, Tom

I can't see the smart guide at illustrator CC

i can't see the smart guide at illustrator CC,please tell me~

p,
Nothing to tick in the View dropdown list (View>Smart Guides)?
If not, you may start from the top of the following list.
The following is a general list of things you may try when the issue is not in a specific file (you may have tried/done some of them already); 1) and 2) are the easy ones for temporary strangenesses, and 3) and 4) are specifically aimed at possibly corrupt preferences); 5) is a list in itself, and 6) is the last resort.
1) Close down Illy and open again;
2) Restart the computer (you may do that up to 3 times);
3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
4) Move the folder (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible);
5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
Even more seriously, you may:
6) Uninstall, run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html

Can't view the sheets when using subquery in discoverer desktop

Hi All,
I have created 5 subqueries sheets and I need the data from sheet1, sheet3, sheet5. But in the main sheet when I choose the subquery sheets, its showing only 3 sheets(i.e., sheet1, sheet2, sheet4). I don't want the data from sheet2 and sheet4 but I want from sheet1,3,5. I can't view the sheet3,5.
Please advice.
Thanks,
Kamal

I use Image Converter for iPad to convert my Sony RAW file.
Not sure if it'll work for Canon.

App Store on the iPad (iOS 6), can you view the Top Charts for iPhone?

In the App Store on the iPad (iOS 6) can you view the Top Charts for iPhone? It used to be possible in a previous version of iOS.

disregard post.

How can I view the USMT recovery key in SQL report

Hello all,
Can anyone help me to provide sql query for below link… What I am looking is Just to create a report with all computers that has computer association any type with the recovery key information.
http://www.windows-noob.com/forums/index.php?/topic/1763-how-can-i-view-the-usmt-recovery-key/
I have tried below but not working so looking for help…..
SELECT TOP (100) PERCENT dbo.v_StateMigration.SourceName, dbo.v_StateMigration.SiteCode, dbo.v_StateMigration.SMPServerName,
dbo.v_StateMigration.SourceMACAddresses, dbo.v_StateMigration.RestoreMACAddresses, dbo.StateMigration.StateEncryptDecryptKey,
dbo.StateMigration.StorePath, dbo.StateMigration.StoreSize
FROM dbo.StateMigration INNER JOIN
dbo.v_StateMigration ON dbo.StateMigration.SMPServerName = dbo.v_StateMigration.SMPServerName CROSS JOIN
dbo.v_UserStateMigration
WHERE (dbo.StateMigration.StorePath IS NOT NULL) AND (dbo.StateMigration.StoreSize IS NOT NULL)
ORDER BY dbo.v_StateMigration.SourceName

Try this.
SELECT Distinct
SM.SourceName,
SM.SiteCode,
SM.SMPServerName,
SM.SourceMACAddresses,
SM.RestoreMACAddresses,
SMT.StateEncryptDecryptKey,
SM.StorePath,
SM.StoreSize
FROM
dbo.v_StateMigration SM
JOIN dbo.v_UserStateMigration UM on SM.RestoreClientResourceID= UM.RestoreClientResourceID
join dbo.StateMigration SMT on SM.SMPServerName = SMT.SMPServerName
WHERE
(SM.StorePath IS NOT NULL)
AND (SM.StoreSize IS NOT NULL)
ORDER BY
SM.SourceName
http://www.enhansoft.com/

One more reason to put my iMAC at the curb. I can open and view Picasa photo links when I sign in via Google, but if I'm in Mail and click on the Picasa image link (my own or one someone esle sends me I can't view the images. Thye are all blank white squa

One more reason to put my iMAC at the curb. I can open and view Picasa photo links when I sign in via Google, but if I'm in Mail and click on the Picasa image link (my own or one someone else sends me) I can't view the images. They are all blank white squares. This started a few weeks ago. Why can't I view Picasa link images through Mail?

What you are experiencing is 100% related to Malware.
Sometimes a problem with Firefox may be a result of malware installed on your computer, that you may not be aware of.
You can try these free programs to scan for malware, which work with your existing antivirus software:
* [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
* [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
* [http://support.kaspersky.com/faq/?qid=208283363 TDSSKiller - AntiRootkit Utility]
* [http://www.surfright.nl/en/hitmanpro/ Hitman Pro]
* [http://www.eset.com/us/online-scanner/ ESET Online Scanner]
[http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good permanent antivirus for Windows 7/Vista/XP if you don't already have one.
Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
Did this fix your problems? Please report back to us!

Can I view the smart board display on an iPad

Similar Messages

Maybe you are looking for