Can i write in to field of system matrix??

can i write in to field of system matrix??

Yes, that is possible, but only using the UI (not the datasource) and only if the field is visible and editable (if a user could write to it so could you)...
A small sample on how to do it (C#):
((EditText)oMatrix.Columns.Item("coluid").Cells.Item(<rowNumber>).Specific).Value = "my value"
Be aware though... Updating data this way can be quite slow...

Similar Messages

What is the idea of having STRING type when you can't write into that field

Hello friends
I am desperately trying to write to a field of a database table with DATA TYPE 'STRING'.
When I try to write it using a program from < SE38> or a function <SE37>, I get following error message, while activating the program.
============================================================
<DATABASE_TABLE> must be a flat structure. You cannot use internal tables,
strings, references, or structures as components.
============================================================
So, I have been going in circle to find out how to write a string into this field.
I can't use the CHAR or any such type with a limited field length, since the requirement from my customer is to use a variable length string.
Has anybody seen this problem before and if you have resolved this issue, I would appreciate if you can please let me know.
Thanks a lot in advance.
Ram

Hi Harish
Thanks for your response.
I can create the table with the data type 'String'. However, the problem is when I try to update the table from a program in SE38 or a Function Module in SE37.
When I try to activate the PROGRAM or FUCNTION, I GET A MESSAGE THAT I MENTIONED EARLIER.
Here is the simple program that I have created that I am not able to activate
==========================================
REPORT ZTEST_STRING1.
tables: ztest.
ztest-zid = 2.
ztest-zstring1 = 'ABC'.
insert ztest.
===========================================
ztest has two fields
zid which is NUMC type
and zstring1 which is STRING type.
When I try to activate I get an error message as follows:
'ztest' must be a flat structure. You cannot use internal tables,
strings, references, or structures as components.
Edited by: Ram Prasad on Mar 20, 2008 6:08 PM

AffectsFormMode property of User defined field in system matrix

Hallo
I added one UDF in System matrix of service call id at panel Solution.
I set formated search for that UDF field to populate Symptons data from system knowldge base form (table).
I set the fromatted search property for that UDF Column is Automatic.
So when i nevigate record on Service call form, this UDF column fetch the value and so form goes in Update Mode.
Please i want to AffectsFormMode property for that column, so i have to get the form mode is "OK"
How it is possible.
Pleaase help me
Narendra
Edited by: NarenKD on Dec 28, 2010 12:24 PM

Hi H2
It is true,
But When i open 'Service Knowledge Base' child form by clicking ID Link Button in Solution Tab of Service Call Form
and update that form (here symptoms field important for me),
it does not change the state of Parrent Service call form to update.
Also there is not any link between this two table SCL1 service call and OSLT Solution knowldege table In PLD.
so i create Symptoms UDF in matrix at solution tab of Service call form.
also i create formatted search to fill this column.
I set that formatted search as "auto refresh when field change"
so when i navigate through service call records. it featches and put value in that UDF column and make form state "Update"
I want to avoid it.
means when i navigate the service call, when the value of that UDF Is different then OSLT table then that Service Call goes to update state otherwise it have OK state.
I used query in formatted search to fetch the value for UDF
What will be the solution for this problem.
Also tell me Can i call formatted search through program means can i give formatted search command (shift F2. or press formatted seach button) in program.
Regards
Narendra
Edited by: NarenKD on Dec 29, 2010 9:41 AM
Edited by: NarenKD on Dec 29, 2010 9:50 AM

Does iMessages only work when writing to people who have i05, or can you write to people using other systems ?

I have an iPad 2, but have never yet been able to send a iMessage....does this only work when writing to people who also have i05, or can you also write to people who use other systems ?
iMessages is turned on on my system, but even when writing to people who I know have iPads or iPhones , I just get the red exclamation mark....
Sending messages on my iPhone seems to work okay when sending to non iPhone users, so I don't understand what's wrong here .

From http://support.apple.com/kb/HT3529 :
iMessage allows you to send unlimited text, photos, videos, locations, and contacts using Wi-Fi or 3G* from your iPhone, iPad, or iPod touch to other iOS 5 users.
Note: On iPhone, if iMessage is unavailable, the message may be sent as SMS or MMS, depending on content. Carrier messaging rates may apply. You can turn this on or off in iPhone at Settings > Messages > Send As SMS. Messages sent using iMessage will appear in a light blue bubble, while messages sent using SMS or MMS will appear in a green bubble.

Can't write in input field in my webmail

I use webmail (Netfirms). Things were fine until Firefox wanted to use certain fonts, to which I declined. Now, when I need to email someome through this webmail account, I can't type in the input field. When I tab down through the CC BCc etc. it ends up going up to the address bar.
== After Firefox wanted to install fonts I don't have

Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
You can use "Disable all add-ons" on the ''Safe mode'' start window.
You have to close and restart Firefox after each change via "File > Exit" (on Mac: "Firefox > Quit")

How can i add a new row in System Matrix passing itemcode and quantaty

Hi All,
I have to add new lines in the matrix system only through the itemcode and item quantity. I tried several ways without success. Maybe the following code help to explain what I'm trying to do.
Someone already inserted rows in the matrix system? Can someone show me how I can do. This example is in C# but if someone has in VB I will apreciate.
FormUID = SBO_Application.Forms.ActiveForm.UniqueID;
            f = SBO_Application.Forms.Item(FormUID);
            try
                SAPbobsCOM.Recordset oRS;
                oRS = ((SAPbobsCOM.Recordset)oCompany.GetBusinessObje
SAPbobsCOM.BoObjectTypes.BoRecordset));
                oItem = f.Items.Item("38");
                oMatrix = ((SAPbouiCOM.Matrix)(oItem.Specific));
                oEditText = ((SAPbouiCOM.EditText)oMatrix.Columns.Item(3).Cells.Item(oMatrix.RowCount - 1).Specific);
                string Codigo = oEditText.Value; //Select the item number to use in strQuery
                strQuery = "SELECT U_ART_COM FROM [@SB1EVOL_COMPOSTOS] where
U_ART_PRI='" + Codigo.ToString();
                 oRS.DoQuery(strQuery);
                if (oRS.RecordCount > 0)
                    oRS.MoveFirst();
                    numart = oRS.RecordCount;
                    f.Freeze(true);
                    for (j = 1; j <= numart; j++)
                        try
                            ItemCodeTXT = oRS.Fields.Item(0).Value.ToString();
                            oEditText = ((SAPbouiCOM.EditText)(oMatrix.Columns.Item(3).Cells.Item(oMatrix.RowCount).Specific));
                            oEditText.Value = ItemCodeTXT.ToString();
                            f.Update();
                            oRS.MoveNext();
                        catch (Exception oEx)
                            f.Freeze(false);
                            f.Update();
                            MessageBox.Show(oEx.Message + " j = " + System.Convert.ToString(j));
                    j = 0;
                    f.Freeze(false);
                    f.Update();
In this example i try to add rows in Invoice matrix.
Thanks in advance.
Edited by: Luís Filipe Duarte on Jun 26, 2009 4:14 PM
Edited by: Luís Filipe Duarte on Jun 26, 2009 4:17 PM

Viva Vitor,
Antes de mais obrigado pela resposta.
È esse mesmo o meu objectivo. Passo a explicar qual é o objectivo deste desenvolvimento. O que se pretende é que quando um utilizador escreva o código de um artigo numa linha da matrix de um documento de venda o add-on vai ler esse artigo e de seguida consultar uma tabela de utilizador que ja esta criada para validar se esse artigo tem outros artigos associados, e se tiver, entao o addon tem que os escrever nas linhas imediatamente a seguir. Eu queria mesmo, era escrever qual era o artigo e qual a respectiva quantidade. Eu consigo encontrar qual o artigo que o utlizador escreve e qual os artigos associados. O meu problema acontece quando tendo adicionar as novas linhas.
Com o codigo que se segue podes ver que estou a atribuir a uma EditText o codigo do artigo a escrever. O problema é se correr em modo debug consigo ver que a aplicação chega a essa linha
oEditText.Value = ItemCodeTXT.ToString();
e volta para trás, ou seja entra num loop e nao sai daqui.
if (oRS.RecordCount > 0)
                    oRS.MoveFirst();
                    numart = oRS.RecordCount;
                    f.Freeze(true);
                    for (j = 1; j <= numart; j++)
                        try
                            ItemCodeTXT = oRS.Fields.Item(0).Value.ToString();
                            oEditText = ((SAPbouiCOM.EditText)(oMatrix.Columns.Item(3).Cells.Item(oMatrix.RowCount).Specific));
                            oEditText.Value = ItemCodeTXT.ToString();
                            f.Update();
                            oRS.MoveNext();
                        catch (Exception oEx)
                            f.Freeze(false);
                            f.Update();
                            MessageBox.Show(oEx.Message + " j = " + System.Convert.ToString(j));
Eu para adicionar uma nova linha o que tenho de fazer? não vasta passar a informação do item code?
Este desenvolvimento é para implementar ecoreee no sap. Nao sei já tiveste alguma coisa dessas entre mãos.
Obrigado mais uma vez pela atenção. Espero também um dia poder ajudar.
Com os melhores cumprimentos.
Luis duarte

I can't write to a external disk in my MacBook Air

Hi, I have a (Samsung M3 Station External Hard drive (1.5T) ) and i want to use it in my MacBook Air, but i'm having some problems with it. The MACBook Air recognizes de disk and I can read the information but is impossible to copy or write any information on this disk.
Is there any chance to use an external drive whith MAC computers?

Your external disk is probably formatted with the NTFS file system (Windows).
OS X can't write to the NTFS file system.
If the external disk will only be used with your MBA save any data you don't want to lose and use Disk Utility to re-format it with an OS X supported file system.
If it needs to work with both OS X and Windows machines then FAT32 or exFAT are the only compatible file systems.
There is third party software available that will allow OS X to write to an NTFS file system but I have no experience with that so don't know how well it works.

Can we write files and leave them as read-only

Hey Adobe AIR Community,
Another Adobe AIR question for you: Can we write files to the file system and leave them as read-only in Adobe AIR?
In the future, we would overwrite these files (or delete them and write a new one).
Thanks,
Mauricio

Please provide us with your Event Viewer administrative logs by following these steps:
Click Start Menu
Type eventvwr into Search programs and files (do not hit enter)
Right click eventvwr.exe and click Run as administrator
Expand Custom Views
Click Administrative Events
Right click Administrative Events
Save all Events in Custom View As...
Save them in a folder where you will remember which folder and save as Errors.evtx
Go to where you saved Errors.evtx
Right click Errors.evtx -> send to -> compressed (zipped) folder
Upload the .zip file to Onedrive or a file sharing service and put a link to it in your next post
If you have updated to win 8.1 and you get the error message "the system cannot find the file specified" it is a known problem. The
work around is to edit the registry. If you are not comfortable doing this DONT. If you are, backup the key before you do
Press Win+"R" and input regedit
Navigate to:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\WINEVT\Channels. Delete "Microsoft-Windows-DxpTaskRingtone/Analytic"
Wanikiya and Dyami--Team Zigzag

How can I avoid the writting of the field TRDAT (table usr02) when I logon?

Hi guys!
The first days of the month we have a high number or RFC processes with a generic user wich access to system at the same time from a remote aplication. This causes a lot of performance problems because of the update of the field TRDAT in table usr02, where the systen registers the last time that the user log on.
Can we avoid the writting of the field TRDAT in table usr02 for a specific user?
Thank you very much in advanced.
Edorta.

Hello Edorta,
I agree with Juan that this is not a very good idea. Moreover this is not just some code based changed but is related to SAP kernel.
I would rather look at other system profile paramters like:
rdisp/rfc_max_login
rdisp/rfc_min_wait_dia_wp
rdisp/rfc_max_wait_time
rdisp/rfc_use_quotas
to control the performance.
Regards.
Ruchit.

Can't write to station globals in deployed system

When I run Teststand distribution on the target system, I can’t write to the station globals from my custom application that uses the Teststand engine. The following are the facts:
When I run my custom application, my sequence can’t write to any of the station globals. The function TS_PropertySetValString returns : -2147024890.
I made sure that my distribution included the sequence editor. When I run my sequence in the editor, I don’t get any errors AND the fields in the station globals are actually updated with the correct values.
I have updated all of the users using the “User Viewer” in the sequence editor to make sure that the “Edit Station Globals” and “Grant All” are true. I have added code to my custom application to query the engine for these flags and display them in a popup, the flags are TRUE.
I also made sure that the “Check User Privileges” under the “User Manager” in the sequence editor is OFF. It made no difference
I am at a total loss. Any ideas?
Todd

Inside my custom application EXE that launches the teststand engine, the following call works:
tsErrChkMsgPopup(TS_PropertySetValString (m_oGlobals, &errorInfo, "TestConsoleInfo.Operator", 0, sText));
The above call uses a globals object
Inside the DLL, that is invoked by the sequence file being executed by my custom application, the following function fails with totally bogus info in the tsiErrorinfo structure. And yes, the sequence handle is valid because this same sequence handle is used to read from the station globals, we just can't write to the station globals.
iStatus = TS_PropertySetValBoolean(g_iTSseqHandle, &tsiErrorinfo,
"StationGlobals.ErrorInfo.CurrentError.Occured",
0, 1);
The above call uses a sequence object
Todd

Can we write Field Symbols in SELECT statement?

Hi
Can we write teh Fiel Symbols in the SELECT Statement ?
Can you give how to write it, with Example ?
Regards,
N.L.Narayana

Hi,
Do you ask for that ? :
field-symbols: <field1> type any ,
               <field2> type any.
assign component 'TOTO' of structure 'TATA' to <field1>.
assign component 'TUTU' of structure 'TATA' to <field2>.
select single toto
       into <field1>
       from tata
       where tutu = <field2>.
Rgd
Frédéric

How can we add Text field on system form which is updateable?

Hi Experts
I Want to create text field on System Form like A/R Invoice, in which I can store value after saving the document. I means Updateable field. Is it possible and How?
Thanks
Regards
Gorge

Hi Gorge,
Please follow Jeyakanthan instructions. You may know how to create a UDF but you clealy don't understant how they work.
A UDF in the System document's Title table is always updatable, unless you define it otherwise or do not have permission to update it (Open the form where you created the UDFs and press CTRL + ALT + B to open the definitions form).
A UDF in the System document's Rows table is always updatable ONLY if that document's rows are updatable AND if you set them as updatable (via Form Settings) and have permission.
On a User Form, you make your own rules!
Regards,
Vítor Vieira

Can we write %System.getProperty("CONFIG_MODE");% this stmt in EL or jstl

Hi everyone,
Can we write below statement in EL or jstl instead of using Scriplet.
<%System.getProperty("CONFIG_MODE");%>
Thanks,
Nihar.T

getting a system property is too much on the business logic side. You could create a bean that returns the system property as a member, like:
public class PropertyBean
public String getConfigMode()
return System.getProperty("CONFIG_MODE");
}then simply use EL in your JSP(s) to get the value from that bean. Of course you could just make the getConfigMode() method part of an existing bean you are using.

I have 2TB G-Drive it only will Write to operating system 10.8.3 and NOT the original 10.6 can I write with Both OS Systems....Please Advise

I have 2TB G-Drive, it will only Write to operating system 10.8.3 (Mountain Lion) and NOT the original 10.6 (Snow Leopard) can I write with Both OS Systems....Please Advise how to

I think I see where you're going with this: do you mean you're sharing an external drive which shows up on the Mac with Mountain Lion, but not Snow Leopard?
Possible explanations:
1) How is it connected? Does the external drive have two USB (or FireWire) connections, and you have a cable going from the drive to each Mac? If so, that's a big no-no. Never daisy chain the same drive to two different computers at the same time. You'd have to use one cable, dismount the drive from the Mac currently using it, then plug it into the other Mac and mount it there. It's a one-at-a-time thing.
2) You're already doing the above correctly, but when using the Mac with Snow Leopard, when you turn on the drive, it refuses to appear on the desktop. I see this all the time when booting between one OS and the other on my Mac Pro. No idea why, but when Mountain Lion uses the drive, and I then try to use the same drive after booting into Snow Leopard, it won't appear (or only some partitions will appear) on the desktop.
Simple, though odd solution. Launch Disk Utility. The drive partitions will then mount as they should. You don't even have to do anything in Disk Utility. Just launching it will cause the drives to mount as they should have in the first place.

Hello, I can not use my text field in PS cc. I can drag a text box, but when I write something in, I can't see the letters!

Hello, I can not use my text field in PS cc. I can drag a text box, but when I write something in, I can't see the letters!

Opacity at 100?
Does the cursor move as you type?
Reset the tool by right clicking here to see if that is the remedy.

Can i write in to field of system matrix??

Similar Messages

Maybe you are looking for