Can iMac be used as external monitor for old Mac Mini?

I just bought a used Mac Mini PPC 1.4GHZ, 1GB Ram, 80GB HD. It will be shipped to my parents out of state but until then I need to configure it at home. Can I connect it to my iMac 20"?
In other words, is there any way to turn off the direct connect of the iMac's internal workings to the screen and have the screen used temporarily by a different computer?

Although you can "remote control" any Mac from your iMac20" through a network connection (using Screen Sharing in Leopard, or free VNC software in earlier OSX releases), you will need a real monitor to do the initial set up of the Mini - including the steps necessary to activate screen sharing.
The only iMac that had any video input ability was the original CRT Bondi blue iMac from many years ago. Your iMac has video output, but no video input.

Similar Messages

Can iMac be used as a monitor for a Mac Book

My old boss used a white iMac, but my new boss got a MacBook because she works out of the office quite a bit.
But of course the MacBook has a much smaller display.
Is there anyway to connect that big white monitor to her MacBook?

Maybe someone else has a definitive answer, but as far as I know the white iMacs did not have that capability - only the newer models do. You might want to look up the specs on the white iMac on the Apple support pages and that should tell you what ports it had.

HT5219 I would like to use my iMac 7,1 as a monitor for my Mac mini 2012. Is that possible and if yes, what type of cable connection do I need? Thank you.

I would like to use my iMac 7,1 as a monitor for my Mac mini 2012. Is that possible and if yes, what type of cable connection do I need? Thank you.

No. Your iMac only has DVI video connection. You would need an iMac with Thunderbolt.

Can an iMac be used as a monitor for a Mac Pro?

Hi all,
I'm getting nowhere looking in the search, so I'm hoping someone can clear something up for me:
is it possible to use an iMac as a display for a Mac Pro?
I am beginning to think I'd better get a Mac Pro, but I already have an iMac, for which I've been researching getting external storage so I can do Final Cut Studio editing and back up of it all... as someone suggested, might be better in the long run to just get it all in the Mac Pro, and have the option and simplicity to upgrade as and when... but then there's the need for a display for the Mac Pro, which does whack the price up... but if I could use this iMac, what a beautiful monitor...
I thought someone said that Final Cut would not allow another computer to be attached though... is that the case, anyone know?
Thanks for any knowledge and help, much appreciated... I'm learning to not rush into anything, as you learn more the whole picture seems to change!
Cheers, Syd

The current 27-inch iMac can. Other iMac models can't outside of a VNC setup or ScreenRecycler; all such solutions require a standalone monitor for setup and troubleshooting.
(51433)

New 21" iMac as monitor for old Mac Mini?

At present my computer is an old PPC eMac with OS X 10.4.11. I want to buy an up-to-date 21" iMac. (I can't afford either the cost or the space for a 27" one.) But I have a mass of software and of files (a host of articles, etc., in that old warhorse, AppleWorks, for instance, and the scores of my musical compositions in an old version of Finale) which, for reasons it would be tedious to go into here, I cannot update so that they would work in the iMac.
If I buy the iMac, I want, for reasons of space, to get rid of my present eMac. But I have the offer of an old PPC Mac Mini with the same OS as my present eMac, to which I could transfer the contents of my present eMac hard disk. If I were to do that, I would want to use the new iMac as a monitor for the Mini. On the face of it, this cannot be achieved with the 21" iMac (only with the 27" iMac).
Is there any software or other adaptor-device that would permit this? I have looked at the EyeTV website, and it looks to me as if that is not what I would need. I should be grateful for any suggestions.

Help! As time rolls on, I get more and more ignorant, not more and more clued up! What is meant in this context by 'Sharing'? I thought I could completely separate the two operations:
1. Forget all about the new iMac. Connect the eMac to the Mini and copy everything at present on the eMac to the Mini. Then abandon the eMac — put it into the garden shed or sell it; forget it ever existed. The Mini is now my computer, with all my software and files on it.
2. Pretend that I never had an eMac. Hook up the Mini to the new iMac via an adapter and hope that everything that is and everything that happens on the Mini will show up on the iMac's screen.
Is that not right? I want to get the eMac off my desk because it takes up too much room, and I want to have an iMac there instead.
Sorry to be so obtuse!

Can an iMac be used as a monitor from a Mac Book air

Can Imac be used as a monitor for a Macbook air?

Yes, but on the imac you have to push command + F2 to enter it into the Target Display Mode.
You only can connect an iMac via thunderbolt to MacBook Air only possible when both have a thnderbolt ports
or iMac via MiniDisplayPort to MacBook Air only possible when both have MiniDisplay ports.

How do I use my late 2011 iMac ( with thunderbolt) as external monitor for laptop/Xbox or other device with hdmi as output.

May be this question has been asked thousand times. how do I use my mid 2011 iMac ( with thunderbolt) as external monitor for laptop/Xbox or other device with hdmi as output. if apple hasn't removed that feature and has just moved that functinoality to thunderbolt then how can I use it. currently there is no laptop available with thunderbolt output. no 3rd party converter available. whats the use of having feature on latest functionality if we cant use it. I wish they would have made one port has mini-dvi and other thunderbolt for backward compatibility untill some vendor comes up with converter.

It Says :
Mac (21.5-inch, Mid 2011) and iMac (27-inch, Mid 2011) and later computers support Target Display Mode via Thunderbolt to Thunderbolt cable (2 m) when the source is another Thunderbolt-equipped computer.
Name one computer model/vendor which has thunderbolt as output for display + audio. this is so stupid to move to new technology without availbility of its compatible devices.

Can I use My Ibook G4 as a Second Monitor For My Mac Mini G4

Hi
I wonderd if theres any way of being able to use my 14'' Ibook G4 as a second monitor for my Mac Mini G4? I already have a Samsung SyncMaster 913n. Is there any way of doing this by firewire using both monitors, if not what cables would I need?
Thanks

There is a application called Synergy which you may find useful. It allows the keyboard, mouse and clipboard to be shared across computers, and even different operating systems. It's not strictly what you have asked for as each computer still runs it's applications (and operating system) separately, meaning you can not drag windows between the screens, but by allowing you to copy and paste between the computers, and seamlessly slide your mouse and keyboard input between them you may get the effect you desire. Oh, and it is free and open-source, so why not give it a whirl?
You will need to connect the machines with a TCP/IP network, which can be done either with an ethernet patch cable, or alternatively as you suggest, using FireWire - these two articles may assist you in setting that up: IP over FireWire in Panther and Tiger.
As a point of note, a commercial program, MaxiVista allows exactly what you are looking for under Microsoft Windows.
Hope that helps.
Jason

I've got a MacBook pro 15' running 10.6.6. I want to use an external monitor for my graphic design work running Adobe software and thought I'd try an HD TV. I ran a Mini Display to HDMI lead to the TV but the picture quality was disappointing.

I've got a MacBook Pro 15' running 10.6.6. I want to use an external monitor for my graphic design work using Adobe software and thought I'd try an HD TV. I ran a Mini Display to HDMI lead to the TV but the picture quality was disappointing. I also tried a Mini Display to VGA lead and that wasn't much better. I tried all variations of resolutions in System prefs - Displays but nothing helped. Am I getting something wrong? Thanks all.

In addition to pixel density, you are up against the translation driver card in the TV.
If you read the fine print of computer-resolution-capability in the TV user guide, you will see a chart as tall as the manual page. At the top is the smallest resolution capable, at the bottom is the full use of the 1080p in the TV.
Mac falls into the top 25% of the page, maxing out at 1366x768 often. This is because the TV control card is expected to do too much of the work, but is not designed for computer-monitor processing.
I looked at the resolution charts on 2 TVs before deciding to buy a 1080p LCD monitor that has a TV interface/connector. Computer monitor first, TV second. But the thing is only 27 in. Good thing TV is not as important to me as it is to others.

Using an emac as a monitor for a mac mini

Hi,
Sorry if the question was already asked, but a quick search in the forum brought no answer.
I have an emac (OS9) and a mac mini(OSX). I'd like to use the emac as a monitor for the mac mini. Is it possible? How? (Both are G4, although I don't think that's relevant : I don't want to use them at the same time, only to use the Emac as a "screen")
Many thanks.

I happen to know for a fact that you can use the internal screen on an iMac G3 333, and presumably also a 266 and 233. It has a fixed horizontal frequency so it will only display the resolutions that you can choose with it's motherboard installed: 640x480@117Hz, 800x600@95Hz, and 1024x768@75Hz. With DisplayConfigX I was even able to get other resolutions, as long as I stayed within the 60kHz horizontal frequency. If try to set it to any other resolution and refresh rate it will not work, so the best way to test it is to have another screen as your main screen so that you can set the resolutions on the iMac screen from there. I imagine that the screen in the eMac does not have a fixed horizontal frequency, so if you got the pinouts, you could probably get it working. However, I made a custom video cable for a slot loading iMac G3, and I couldn't get it to work.

Compaq Laptop as monitor for a Mac Mini

I was wondering if it would be able to use a Compaq laptop as a monitor for a Mac Mini because I want to be able to easily switch between Mac and PC for as cheap as possible I would like to use the laptop as a monitor for the Mini.
Thanks a lot,
Alex

Richard,
Unless the Compaq has a video
i input
this is not possible. However, you can use VNC to control your mini from your Compaq. If this is an option for you depends on the intended use for your mini.
JJ

Can I still use Appleworks 6.2.9 with Mac Mini 2012?

Can I still use Appleworks 6.2.9 with Mac Mini 2012?

Yes, MlchaelLAX, the KVM switch allow one to use one monitor, one keyboard, and one mouse between two computers. It has been so long that I'm not sure how to find the MODELS to the G4 and G5. Unless you mean what makes the Mac tick. The G5 is a dual 2GHz PowerPC, with 2 GB DDR SDRAM. The G4 is a bit slower, will look tomorrow.
I want/need a newer Mac model because unlike the days before OS X, all software was included as the newer OS were added, not so today. I'm still using Tiger because I still use a couple programs from the old days. When I eventually purchase a new model, I will have to buy all new software. That's find if one has plenty of money and wants to learn everything from scratch, but I'm hanging on as long as I can.
I tried TenFourFox, but it didn't allow video, of course since I tried Michael's suggestion, the video might not be an issue. So far, every thing works the way it should.
I have a lot of faith in Mac users, their loyalties to Apple is what kept Apple floating when many thought it would sink. These folks are survivors; I only wish the apple people on the top appreciated that loyalty today, but I guess things are too good.
Thanks to all for you kindness. Tomorrow I will show my husband how to remove his yellow threat on his G4. If anyone can answer any other questions, please know I will keep viewing this post.
Patt

Need advice on a monitor for my mac mini

Hi,
I am going to buy a monitor for my mac mini.
I had been using a CRT monitor with my PC.
I guess LCD monitors are the norm these days.
Can someone recommend a monitor size and other details which I must look for before buying a monitor?
My computer runs 24 hours a day. There is very little downtime.
I am not looking for something flashy. I am looking for a monitor which gets the job done.
I am not into graphical/video editing though I will be viewing a lot of photos/movies/mp4/avi movies on it.

Almost any LCD monitor that will accept a digital signal, via a dvi cable, will work. With digital, the computer doesn't have to convert the video signal to analog, so what you see is a bit crisper. Many LCD monitors will accept both analog and digital video inputs. I have a Samsung 19" 904BW LCD monitor - a basic model, not too expensive, accepts digital or analog signals (I use digital from my mini), which is a good display.
Some LCD monitors come with speakers built in, which can be a plus if desk space is at a premium.
You should go to a store to view the various LCD monitors available - see what you like, what appeals to you. Note that sometimes LCD monitors come with dead pixels, and some vendors have a minimum number of dead pixels required before they will exchange the monitor. The recommendation above to buy from someplace with a good return policy should be considered when buying an LCD monitor.

If I get a 3D monitor for my mac mini, will it turn the graphic to 3D?

Can any one help me that what If I get a 3D monitor for my mac mini, will it turn the graphic to 3D?
or I need a 3d Processor for my mac mini?

Not sure what you mean, but I truly think it requires far more than just a 3-D Monitor.

Samsung Flatscreen (BN68-04027A-03) into monitor for new mac mini.

Turning Samsung Flatscreen (BN68-04027A-03) into monitor for new mac mini. Any 'how to' tips would be appreciated. Thank you.

Several people have done this Mod and there are forums dedicated specifically to apple mods (like apple fritter).
http://www.applefritter.com/node/21906
http://www.123macmini.com/news/story/782.html
http://www.kaede.sakura.ne.jp/~kidou/mac/macmini01.html
http://www.destruc.tv/minitosh/
http://www.mini-itx.com/projects/mac-itx/
http://www.macmod.com
The James Colby system (123macmini link) seems to be the only one I could find with an color display. He went for an LCD, instead of CRT. He kept the original look of the CRT by cutting the picture tube (so the glass face stayed in place, but behind it is an LCD).
Here's the discussion where he specifies the source for the LCD display:
http://www.123macmini.com/forums/viewtopic.php?t=14770&postdays=0&postorder=asc& start=15

Can iMac be used as external monitor for old Mac Mini?

Similar Messages

Maybe you are looking for