Can iPhone use SOCKS (not HTTP) proxy to connect to internet?

Does anyone know if there is a way for an iPhone to connect to a SOCKS proxy (such as one run off of another computer)? In my dorm rooms we are not allowed to install wireless routers, but we can use our laptops to "share" our internet connection wirelessly. The iPhone supports HTTP proxies (easy enough to set up on computer) but then can only get data over port 80 (e.g. no email). SOCKS proxies allow data sent over all ports to be routed through another computer.
If there is no way to do this, apple should consider putting it into the next update. It is in the current version of OSX and is very easy to set up.

Hello,
We installed BOE4 on the server, it runs perfectly, no issues.
Install Crystal Reports for Enterprise on a laptop. It's the latest one as I checked to see if there's any later versions or patches.
I am able to log into the BOE Enterprise system as administrator.
Namely I have setup the Server connections per the following:
Server Name:   <IP address>
The check box for SSL is unchecked.
Server Port Number:   nnnn
Server Context:  /dswsbobje
System display name:   <my server> External Connection
User Name : Administrator
It connects successfully.
I then go and create a report against a Universe that I can see listed on my BOE 4 server.
It then comes up with this error message:
"Unable to Logon: There is a problem logging on to SAP BusinessObjects Enterprise.
Please check your logon credentials and make sure your nework is properly configured before trying again.
If problems persist please contact your Administrator."
Architecture: 
BOE 4 sits on Windows 2008 Server SP2
Laptops tried it on are Windows Vista and Windows 2003 Std.
Thanks for looking into this for me.
Edited by: Symonds Janetta on Oct 11, 2011 12:05 AM

Similar Messages

  • Iphone Safari needs a http-proxy to reach the internet

    is it possible to configure a http proxy to reach the internet over the wiFi-Connection connected to an enterprisenetwork?

    Yes. Connect to the network (Settings > Wi-Fi), then tap the little blue arrow next to the network name, and scroll down to the Proxy settings area.

  • My iPhone won't work without wifi and I can't receive or send iMessage unless I have wifi or 3G can't use Instagram, Twitter or anything to do with internet or messaging, how do i fix it?

    My iPhone won't work without wifi and I can't receive or send iMessage unless I have wifi or 3G can't use Instagram, Twitter or anything to do with internet or messaging, how do i fix it?

    For anyone else wondering how to fix this, all I did was turn my iPhone off and then turn it back on.

  • Use proxy to connect to internet

    Hi,
    Is it possible to connect to internet using proxy inside adobe air app? Before connecting to internet,I have to configure first the proxy credentials and the adobe air now will connect to internet?any idea?
    not to configure the OS proxy.
    any code sample?
    thanks a lot.
    cheers.

    You can instruct Java to use, say, a HTTP proxy.
    http://www.cafeaulait.org/javafaq.html#proxy

  • When I was updating I Phone version 4  from iTunes. it got stuck in middle of updating, after uninstall the version 3 and new version 4 was not installed. Now iTunes is not detecting the iphone and my iphone is also not working n showing connection cable

    When i was updating i phone version 4 from Itunes. It got stuck in middle of updating, after uninstall the version3. But new version was not installed. Now itunes is not detecting the iphone and iphone is also not working and showing connection cable with itunes. Pls help..

    Check your system for possible Malware. But you have to do it in WIndows Safe Mode.
    (Do not use your own Anti-virus to SCAN)
    Start your computer in "Safe mode with networking", go to this link download a free version of Malwarebyte.
    http://www.malwarebytes.org/products/malwarebytes_free
    Install and perform update immediately, then do a full SCAN. Remove malware if it indeed finds any. Restart computer to regular windows to let Malwarebyte complete the removal.
    To start your computer in safe mode
    Press and hold the F8 key as your computer starts. You need to press F8 before the Windows logo appears. If the Windows logo appears, you'll need to try again by waiting until the Windows logon prompt appears, and then shutting down and restarting your computer.
    On the Advanced Boot Options screen, use the arrow keys to highlight the "safe mode with networking" option, and then press Enter. Log on to your computer with a user account that has administrator rights.
    When your computer is in safe mode, you'll see the words Safe Mode in the corners of your screen. To exit safe mode, restart your computer and let Windows start normally.

  • Can I use Power BI graphs on non-desktop's Internet Explorer ?

    Can I use Power BI graphs on non-desktop's Internet Explorer ?
    I want to use Power BI graphs web page on non-desktop's Internet Explorer.
    Now, I try it, get alerts Silverlight need.
    and I still installed on my Windows 8.1.
    and I can use Power BI graphs on desktop's Internet Explorer.
    But, I cannot use Silverlight on non-desktop's Internet Explorer.
    Regards,
    Yoshihiro Kawabata

    Dear Yoshihiro,
    Got it, I see your point, will check with the team why we don't default here to HTML5
    Did you look at using the Power BI App?
    http://apps.microsoft.com/windows/en-us/app/microsoft-power-bi/b7e7c94d-2ea3-4fa6-a277-9d19a1f697ba
    And I can think of other workarounds but it really depends on the scenario. If you wish to share some more info please send us a mail to
    this address.
    Guy
    GALROY

  • HT201311 Can I use personal hotspot as wifi to connect AirPrint printer?

    Can I use personal hotspot as wifi to connect AirPrint printer and print?
    Thanks. Appreciate your help.

    Yes, that should work at least temporarily.  Some printers are not constantly looking for WiFi networks, however, so you'll have to make sure the hotspot is setup and active every time you turn your printer on.

  • HT4913 Can I use iTunes Match when I don't have internet connection?

    Can I use iTunes Match when I don't have internet connection?

    If you've downloaded the music that you want to be able to listen to when you don't have an internet connection - you won't be able to stream or download whilst offline.
    Using Match on an iOS device : http://support.apple.com/kb/HT5637

  • IPhone 4S is not charging. Upon connecting to macbook air, it gives the power surge alert. Please help.

    iPhone 4S is not charging. Upon connecting to macbook air, it gives the power surge alert. Please help.

    What do you mean by "power surge alert"? What exactly does it say when you try to connect it? If you're talking about the message about a USB device drawing too much power, that can sometimes be caused by a bad cable or something stuck in the port. Do you have another cable you can try?
    = L.I.

  • My iPhone 4s is not switching on, I connected it to itunes thru my Windows 7 laptop and it says phone needs to be restored. I clicked okay and it started the process however the progress bar with the apple logo is on the screen, progressbar do not start

    My iPhone 4s is not switching on, I connected it to itunes thru my Windows 7 laptop and it says phone needs to be restored. I clicked okay and it started the process however the progress bar with the apple logo is on the screen, progress in the bar did not start yet after 5 hours. Some one please hep me.

    I did put it in DFU mode but its still not working, although everytime it shows your iphone needs to be restored. Kindly help.

  • Intermittently iphone 6 and 6 plus is wifi connected but internet does not work.

    Hi,
    I have an issue where intermittently iphone 6 and 6 plus is wifi connected but internet does not work. iMessage works though.  Toggling the wifi setting clears
    the issue temporarily but it occurs again.  Running iOS 8.3 now.  This was the case on iOS 8.1 and 8.2 as well. 
    I have tried the typical troubleshooting steps (reboot/reset network settings/disabling location services for wifi/upgrade/etc)
    My router is an EA9200 router with 2.4 Ghz and 5 Ghz.  It is configured with all bands with the same name.
    All other devices in my house works perfectly fine and has no disconnects (ipad/macbook air/tv's/receivers)
    My thought is that iphone 6 cannot handle well the moving around between bands. 
    Any thoughts or suggestions would be greatly appreciated.
    Thanks,
    David

    Have you tried to reboot your router by turning off the power (you may have to unplug it from the power source), then waiting about 30 seconds, then turning it back on?  This seems to solve a lot of problems.

  • My iPhone 5 is not dectecting when i connect it to iTunes on windows; what should I do to resolve this problem?, My iPhone 5 is not dectectong when i connect it to iTunes on windows; what should I do to resolve this problem?

    My iPhone 5 is not dectecting when i connect it to iTunes on windows; what should I do to resolve this problem? I have restored my device and also installed new itunes.

    What happened when you tried to update? Are you seeing an error message?
    ~Lyssa

  • Can I use a midi/usb cable to connect to garage band?

    Can I use a midi/usb cable to connect to garage band? Or do I need to buy an interface such as M-Audio. I have the M-TRACK, but haven't connected it yet.

    karbuckle10 wrote:
    Do I need two cables back and forth between the M-TRACK or just one OUT from the piano and IN from the M-TRACK?
    i must confess i haven't checked GBv10, but all previous versions (and i'm guessing GBv10 as well) have only supported MIDI-IN, so all you need is to run the keyboard's OUT to the interface's IN

  • What tags can be used with Notes?

    I have been searching all over to figure out what typs of tags can be used when creating Notes for the iPod. I keep comming back to this document http://developer.apple.com/hardwaredrivers/ipod/iPodNoteReaderGuide.pdf. It is supposed to show available tags. At least that's what all the referring sites say to refer to for available tags. It seems to be a basic tutorial with not much going on. I want a broader reference so I can format my notes. Supposedly the tags are based on a subset of HTML. Well then what are these tags? Has Apple taken the original document down? ***?
    Shuttle XPC ST20G5   Windows XP  

    That's just it, if you read further down it says "You can get the full list of tags for iPod notes over on Apple’s developer connection" and it is linked back to http://developer.apple.com/hardware/ipod/. However, there is no full list of tags on their site anywhere. In the meantime I emailed the ADC to see if they know what happened to the original document. There's got to be more tags than just those on MAKE.

  • Can comment using windows, not when using ubuntu

    I got a pdf which i keep in a dropbox-folder. I want to comment and highlight the pdf.
    And I can do so using reader X on windows, but I can't using acroread on ubuntu. For some reason the restrictions on the pdf change when using another OS.
    If you need more information, please ask

    Hi, please read the troubleshooting sticky on top of the forum. It mentioned your problem plus the suggested solutions.

Maybe you are looking for

  • How to run an application on windows mobile 6 device ?

    Hi everybody, How can you run an application on a windows mobile 6 device with the new SDK 3.0 ? Can you launch a MIDLET like any other program ? or running your MIDLET on windows mobile 6 is only for testing while you are developing. When you finish

  • Blue Screen + Spotlight error message... I can't reboot!

    Hi All, Upon startup, iMac with 2+GB RAM running OS X 10.5.6 does the following: 1. Normal startup chime 2. Blue screen appears 3. Spotlight error message "Spotlight quit unexpectedly" I can't reboot, or boot in Safe Mode or launch Disk Utility from

  • Add a ReplyTo or From in a mail using OLE2 in Forms 6

    Hi, I am doing a form to automatically send mails (I use forms because I do Excel docs using OLE to link them to the mails...). It works but the From and ReplyTo properties. My code is: FUNCTION Send_a_mail( Recp IN varchar2,                         

  • Missing Toolbar images

    I have yet to find this issue, and I don't know what to do. All the dreamweaver images are missing! Its like a webpage with broken/missing images, but this is the actual program.

  • WRT54G2 and Iomega Home Media Network HDD

    So I am on my second HDD with Iomega. I am thinking now that this is a router problem rather than a HDD problem. I have a 1TB Iomega home media network drive, eversince I bought my router and began using it I have been unable to use my HDD. It is har