Can it be possible to add "Admin" -- not be able to add another "Admin"

I have the following requirement:
     Create the following Groups:
          Admin:
               all the users in this group, should have complete access to application +
               manage users
               But should not be able to add another Admin
          Staff:
               all the users in this group, should have complete access to application
               Can't manage users
               Can't create another Admins
          Editor:
               all the users in this group, should have partial access to certain pages
          SuperUser:
               Same as Admin role except
               He should also be able to add "Admin" user
Question:
Can it be possible to add "Admin" ---> who should not be able to add another "Admin"

Hi,I have the same requirement,and I need another function,I want only one user who can create user,but he can't develop application.how can i do ?
thank you first
lixinzhu
2006/05/17

Similar Messages

  • Greetings, I have an iPod Touch, that I recently tried to access the apps store. I can't enter my password, due to not being able to switch the keyboard to lower case letters. I tapped on the arrow up button, and it makes a click sound, but the letters do

    Greetings, I have an iPod Touch, that I recently tried to access the apps store. I can't enter my password, due to not being able to switch the keyboard to lower case letters. I tapped on the arrow up button, and it makes a click sound, but the letters do not change. Am I doing something wrong?

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up           
    - Restore to factory settings/new iOS device.

  • Possible Solution to Apples not Being Able to Connect to WRT54G After 1.01.0 Firmware Update

    So like everyone else that has apples on their networks, ours did not work after the 1.01.0 firmware update.  However after a few hours and messing around, I finally got them to work with the router without having to downgrade to .9. 
    So far they still work thorugh a restart and a cold start, so I'm hoping that this fix will stick.
    To get this to work you need to have another open wireless connection that you can connect to and get online with.
    Steps:
    1) First open up safari or whatever you use... (obviously doesn't load otherwise you wouldn't be reading this)
    2) Connect to the open wireless network, and then hit refresh... (it should load up the page this time)
    3) Go back up and reconnect to your router.... now try your internet again using your connection.  It *should* work fine...  and you shouldn't have to do it ever again...
    Good luck, hope this helps

    HI  , just an addition to the above.....for MAC's go to system preferneces and then to network...choose you network card uner "connect using" and then under the TCP/IP tab select configure manually.....assign a static IP , subnet and gateway to the MAC along with the DNS entries....this static IP will work with the 1.01.0 firmware version .

  • Possible to add another monitor to macbook for dual screen usage?

    Hiya,
    I would like to find out if I can connect another monitor to my Macpro so I can work with 2 screens?   I can easily do this with a pc laptop ad there is a monitor plug in but I don't see one for my macpro.
    Cheers,
    John

    Recent MacBooks have a Mini DisplayPort or a Thunderbolt port, which can be converted to DisplayPort, DVI, VGA, or HDMI. A Mirrored second display is supported by all MacBooks, and many support the more useful "Extended Desktop".
    Extended Desktop combines the screens along an edge of your choosing to form a much taller or wider desktop. You can drag windows to either display or split them across displays, and the two parts will scroll and update in perfect synchrony. The feature has been present in the operating System since at least System 4.2 in 1987, and is supported by all well-behaved Mac Applications.
    NB: "Full Screen" feature in Mac OS X 10.7 is an iPhone feature ported to Mac OS X, and is useless for large displays and completely frustrating for multiple displays. Do not activate it thinking it is part of the solution -- it is for 4.7 inch single displays.

  • Is it possible to add a field to OKEK in configuration SCREEN?

    Hello SAPPERS,
    I would appreciate if someone could provide some input on the following issue.
    Is it possible to add a field to Define Account Determination for Internal Goods Movements (OKEK)?
    This table determines the GL accounts assigned when inventory is moved between plants.  Is it possible to add another column to the left hand side?  I would add the receiving plantu2019s VGCd, if possible.  Even better would be a profit center group (1100 for all 11xx profit centers for example).
    I know there are two ways to add field to the DB Table. They are INCLUDE and APPEND structure.
    Is it possible to append a field to table V_T8A00, and display it in config screen OKEK?
    Thanks for any advice

    Hello,
    On a transfer, the accounting treatment is different when the move is within the same division VS when it goes to another division. 
    When plant 1101 ships to plant 1102, we donu2019t want to post to account 360100.  When plant 1101 ships to plant 1301, we do want to post to 360100.  Having the receiving profit center group in the mix will enable this distinction.
    Thanks in advance

  • How to add another Segment field in OBC4

    Dear Experts,
    OBC4 -> select Comp. Code -> field Status Group -> select Field St. Grp -> Duuble click on Field St. Grp
    I have a requirement to make Business Place/secn field Mandatory where ever it is used in transaction F-43 , F-02 , F-48 .
    So for this am going through OBC4 . But there (Under Field status Grp.) am not getting any field named as Business Place . There exists a field Business Area . But Business Area and Business Place both are different .
    So Is it possible to add another segments named as Business Place/secn  there with 3 options Supress , Req. Entry , Opt. Entry . So that i can change it to Mandatory .
    Thanks in Advance
    Jack

    Hi,
    Check this sample process
    To get custom fields on IDOC you need to add custom segment on IDOC and for that you have to create a extension IDOC with reference to Basic IDOC.
    You can do that as explain below.
    Here for example you have basic idoc ORDERS05 and you want to add additional segments at header level - ZE1EDK01 and line item level ZE1EDP01
    1. TCode - WE31 : Create custom segments ZE1EDK01 and ZE1EDP01 with the fields you want and release these segments.
    2. TCode - WE30 : Create extension IDOC
    In WE20 enter extension IDOC name - ZORDERS05, select "Extension" option and hit "create" button. When it gives pop-up, select "create new" and enterd linked basis type as "ORDERS05". Enter proper description and save.
    3. On the next screen of WE30, select the segment under which you want to add your additional segment. Save everything.
    4. TCode - WE82. Here you link extension idoc to basic idoc and message type.
    Go into change mode. Hit "New entries button" Enter Message type = "ORDERS", basic type = "ORDERS05" and extension type = "ZORDERS05".
    Regards,
    Satish

  • Will it be feasible to add another graphics card to my laptop G505

                        Hi, I have G505 59379534 model laptop purchased six months back. I am pretty satisfied with its performance. I wish to know whether it is possible to add another graphics card to enhance graphics.

    sorry to be the one to tell you most low end laptops have fixed gfx cards and are not upgradable.
    only a few high end laptops have the ability to be upgraded or added to
    Thx dave
    yoga 2, lenovo b540
    3 custom gaming pc systems

  • HT1689 How do I add another user to my iTunes account?

    Is it possible to add another user to my iTunes account?
    Thx!

    Just have them use the same ID and password.

  • How do I add another email to my Apple ID account

    Is it possible to add another email account to my Apple ID? I have one Apple ID that I would like to share between my Iphone 4S, my wife's Iphone 4, my Ipad, and Ipod. I would like to add/ authorize her email address to my one Apple ID. Is it possible to do this?

    There's no need to add an email to the Apple ID, simply set up the Apple ID on all the devices you would like to use it on.

  • Is it possible to add markups to a PDF that I am not the author of

    Most of the PDFs I generate are from other applications (like Autocad) where I "print to PDF" to create the file.   Most of the PDFs I recevie are generated the same way.   Prior to Acrobat Reader 8, it was simple for me and my collueges to exchange information on these PDFs by using markup tools and resending them with markups.   Since Acrobat 8 has come along, I now find it impossible to markup a drawing (no matter if I have created it using Print to PDF or if someone has sent it to me).  I went to the knowledge base and see that the drawing has to be enabled for markup in one of 2 ways
    In an open PDF, choose Comments > Enable For Commenting In Adobe Reader, and then save the PDF.  
    Start the wizard to initiate a shared review or an email-based review and follow the on-screen instructions. When you’re finished, commenting is enabled in the PDF that you specify for the review. 
    Well, there is no Comments selection in my toolbar.   Second method is given by
    Quickstart: Start an email review
    An email-based review lets you track review status and merge received comments into the PDF.
    Click Review & Comment and choose Attach For Email Review.
    If prompted, enter your identity information to create a reviewer profile.
    Follow the on-screen instructions to select the PDF, invite reviewers, and send the email invitation.
      If your email application doesn’t send email automatically, you may need to answer alert messages and switch to your email application to finish sending the message
    But there is no Review & Comment button to click.
    So, can someone tell me, can I still do a simple markup of any PDF?   Even if I have to jump through hoops can I?    I guess I can understand Why Adobe has done away with this feature in their free tool, as they were not getting any revenue off of it, but it greatly diminishes the usefulness of Acrobat Reader and therefore all PDFs for me.
    Thanks in advance for your response.

    To enable this right you need Acrobat, not the free Reader.
    However, starting from Reader X it is possible to add simple markups to any file, unless it has been specifically disallowed by the creator of the file.

  • In contacts there is the possibility to add a new event, as the birthdays, but they do not appear in iCal. Is there any way to make that possible? It is normal to have a person with his birthday, anniversary and others key dates you want to link to him.

    In contacts there is the possibility to add a new event, as the birthdays, but they do not appear in iCal. Is there any way to make that possible? It is normal to have a person with his birthday, anniversary and others key dates you want to link to such person, but the only one shows up is the birthday. How to be able to show all those dates linked to people in the agenda in the iCal?
    Thanks

    Hi,
    I sugggest you try my application, Dates to iCal. It is shareware with a 2 week trial period.
    Dates to iCal 2 is a replacement for Apple's birthday calendar for iCal. It has a range of features to allow the user to choose what, and what not, to sync to iCal from Address Book.
    As well as automatically syncing birthday dates from Address Book, Dates to iCal 2 can sync anniversary and custom dates. It can set up to five alarms for each date in iCal and can also set different alarms for birthdays and anniversaries. It allows the option of only syncing from one Address Book group. This application also allows for the titles of the events sent to iCal to be modified to the user's preference.
    Best wishes
    John M
    As I sell software on my site and ask for donations, the Apple Support Communities Use Agreement requires that I state that I may receive some form of compensation, financial or otherwise, from my recommendation or link.

  • Since one of the updates of firefox it is not possible to add a document to my email i.e. Telfort.nl

    Since one of the latest updates of firefox it is not possible to add a document to my email account i.e. Telfort.nl
    I checked with Telfort and no problems of this kind is known.

    You can check for problems caused by extension and plugins.
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
    *https://support.mozilla.org/kb/Troubleshooting+plugins
    You can try to delete the mimeTypes.rdf file in the Firefox Profile Folder to reset all file actions.
    * http://kb.mozillazine.org/mimeTypes.rdf
    * http://kb.mozillazine.org/File_types_and_download_actions#Resetting_download_actions
    You can try to reset Firefox.
    *https://support.mozilla.org/kb/reset-firefox-easily-fix-most-problems
    Reset creates a new profile and tries to import some settings from the old profile leaving the old profile intact.
    *https://support.mozilla.org/kb/Recovering+important+data+from+an+old+profile

  • Is it possible to add a new note on stickies.app by terminal/unix shell scripts ?

    is it possible to add a new note on stickies.app by terminal/unix shell scripts ?

    1. If i uninstall GNU Classpath, Does it cause system not to work properly? Not in my experience. I have encountered dozens of cases where it cured problems like this immediately. Alternatively adjust your PATH so that it finds the JDK before it finds GNU CLASSPATH.
    (Now i am using that java on my server with a certificate , I dont want to risk the system. )GNU CLASSPATH is the risk here.
    2. I have searched about your advice, this link tells classpath causes: "certificate insert problems"
    http://builder.classpath.org/japi/jdk15-classpath.html is this what you mean ?
    I can't find that statement on that page, but it does show compliance problems of up to 20% in the security area (and *40%* in LDAP, the area I'm working in at the moment).
    Basically GNU CLASSPATH is not Java and cannot be expected to behave like it. In this case it doesn't even understand the format of a Java keystore. QED.
    Note that they don't call it 'Java', because it isn't. I quote:
    GNU Classpath 1.0 will be fully compatible with the 1.1 and 1.2 API specifications, in addition to having significant (>95%) compatability with the 1.3, 1.4, 1.5 and 1.6 APIs.In other words they haven't even finished JDK 1.1 yet, let alone all the other stuff. At the present rate of progress they never will. That statement is the latest, it is dated 7 July 2009, and the latest actual software is dated 5 February 2009. And there is clearly no intention of ever submitting it to the Java Compatibility Tests as real Java implementors do.
    3. How can i uninstall GNU Class Path without causing any problems to my working server?No idea, can't help you. Ask a Liinux expert.
    4. Is there any way to add the certificate without removing GNU CLASSPATH ?Yes, see above, but I still strongly recommend removal.

  • When I connect my iPhone 5 to my laptop and iTunes, I can't play movies from the iPhone on my computer.Why is that? Can I do this or it's not possible with iPhone5? With my iPod it's no problem.

    When I connect my iPhone 5 to my laptop and iTunes, I can't play movies from the iPhone on my computer.Why is that? Can I do this or it's not possible with iPhone5? With my iPod it's no problem.

    Reinstall iTunes. Make sure you follow the instructions in this support document to the letter. http://support.apple.com/kb/HT1923.
    You may have some problems because Apple has not certified that everything works with Windows 8 yet.

  • I have an iPad 2 with iOS 5.1 and iBooks version 2.1.1. I have 64GB of storage, 80% is used. iBooks is using 250MB of storage. I have a large number of PDF files in my iBooks library. At this time I can not add another book or PDF file to my library.

    I have an iPad 2 with iOS 5.1 and iBooks version 2.1.1. I have 64GB of storage, 80% is used. iBooks is using 250MB of storage. I have a large number of PDF files in my iBooks library. At this time I can not add another book or PDF file to my library.  When I try to move a PDF file to iBooks the system works for a while...sometimes the file appears and than disappears....sometimes the file never appears. Is ther some limit to the number of books or total storage used in IBooks?  Thanks....

    Hi jybravo70, 
    Welcome to the Apple Support Communities!
    It sounds like you may be experiencing issues on your non iOS 8 devices because iOS 8 is required to set up or join a Family Sharing group.
    The following information is located in the print at the bottom of the article. 
    Apple - iCloud - Family Sharing
    Family Sharing requires a personal Apple ID signed in to iCloud and iTunes. Music, movies, TV shows, and books can be downloaded on up to 10 devices per account, five of which can be computers. iOS 8 and OS X Yosemite are required to set up or join a Family Sharing group and are recommended for full functionality. Not all content is eligible for Family Sharing.
    Have a great day, 
    Joe

Maybe you are looking for

  • Logical filename and logical path in lsmw

    Hi all,        I am doing a lsmw for purchasing info record . i created a logicalpath and assigned a physical path to that . i created a logical filename and assigned the logical path .but when i assign that to the lsmw it is throwing error as 'LOGIC

  • Changing ITunes Account for Apps

    How do I change my Itunes account for apps? When I go to update my apps, it still has my old account (my password does not work) and I have since created a new account (divorce issues). I have made a new password request for my old account and I do n

  • How to manipulate the recipient adress of a notification mail?

    Hi, when a task is assigned to a user, LC can send nice notification eMails. Meanwhile the content (mail body and subject) can be freely formatted through custom eMail templates. I need exactly this but in addition to that, I would need to change the

  • Approval procedure if user change in the unit price at Purchase Order

    Dear Experts, I have defined purchase price list in the item master data. I want an approval if there is any devaition in the purchase price list and unit price which is defined in the purchase order. It will always go for the approval. Regards, Ravi

  • Can i get a discount on a new iphone because of my broken ipod?

    I have recently broke my ipod to now the screen looks completly broken also the home button works, ive heard that if you bring in your broken ipod they will give you a new one for $100 but i want a iphone not an ipod is there a way i could get a disc