Can Mail access the sent messages on my POP3 server (webmail)?

Hi there,
I recently got a blackberry, mainly for the email etc. It's all great, but I have stumbled on an issue that I can't figure out:
When I send an email from it, it somehow gets a copy of the sent email into the sent items on my webmail server. But how can I get a copy of my sent messages into my Mac Mail?
In the Mail preferences, I see that there are settings regarding the inbox, but nothing that I have found lets me import messages that I have sent via webmail - or that are in my different webmail "sent items" folders.
Any ideas?
Thanks!!

Blackberry/RIM has their own proprietary email service, so assuming you could access your sent messages, you would need to find out from them how you would do it. Normally, POP mail is not stored on servers, that is when you receive mail it's immediately downloaded to your computer unless you set a flag in your email application to save a copy on the server. Sent mail doesn't originate from your email server, so it's all stored locally. I would presume storing sent mail on a Blackberry wouldn't make a great deal of sense because it would eat a lot of memory space of which there's not a great deal on a cell phone.
Perhaps RIM's mail is IMAP rather than POP where everything is on the server.

Similar Messages

  • Can't find view menu, can't access any sent messages. Really stinks.

    It really stinks can't access my sent messages. Please, put View Menu back where it was. View Menu made easy for user like me who have little computer knowledge. What you did really sucks bigtime.
    Bryce

    This is how Thunderbird works.
    When you get it it has no menu bar.
    <img alt="" src="https://support.cdn.mozilla.net/media/uploads/images/2014-08-09-17-05-10-29035c.png">
    Pressing Alt or F10 make he following happen
    <img alt="" src="https://support.cdn.mozilla.net/media/uploads/images/2014-08-09-17-05-18-8c6d27.png">
    These key strokes and their results are not Thunderbird either. They are standard in your operating system. And most certainly in the case of the Windows 7 64bit both you and I are using.
    Airmail tells you to select a menu
    <img alt="" src="https://support.cdn.mozilla.net/media/uploads/images/2014-08-09-17-05-27-ee88ac.png">
    When you hover over it another fly out menu appears
    <img alt="" src="https://support.cdn.mozilla.net/media/uploads/images/2014-08-09-17-05-35-f7edbb.png">
    Yet you say this does not happen which indicates more wrong than just a missing menu.
    However there is vet another way to get a menu bar. You right click the toolbar between the Quickfilter Icon and the Menu Icon and select the menu bar from that menu.
    <img alt="" src="https://support.cdn.mozilla.net/media/uploads/images/2014-08-09-17-15-41-49cd6f.png">
    Now that there are pictures, do any of these methods work, or do we need to look deeper into your installation.

  • Apple Mail and the "sent messages" verus "sent" folder

    I have a Mac Pro and a MacBook Pro, both running Snow Leopard with all the latest patches.
    In mail, in what appears to be the same mail configuration and the same account, I have sent messages being stored in a "sent messages" folder on the IMAP server and the other is storing it a "sent" folder.
    I can't seem to find a way to get them both to use the same folder and I don't see that in the "Mailbox behavior" tab.
    Any ideas how to get them to use the same folder?

    Where is the Sent Messages folder listed? If it is not under MAILBOXES but in an IMAP folder, select it and go to Mailbox menu, Use this mailbox for>Sent.
    It should disappear and sent messages then appear in the Sent folder.

  • How can I access my sent messages?

    I can't find my sent message folder..help! Please

    Click the Menu button (a.k.a. Hamburger Button) and choose Options -> Account Settings. Click on Copies & Folders in the left pane and check in the right pane where copies of sent messages are stored.

  • JWSDP1.4 Access the SOAP Message in an RPC server

    hi i am new to web services... i have created RPC using JSWDP 1.4.
    I used the wscompile and wsdeploy tool to create the WSDL and server side of the web service.
    but because of a requirement change now i have to get the SOAP message Header and verify the client details (log who is using my service). How can i access the SOAP header??

    Make a backup then edit this file,
    TomcatRoot: ./shared/classes/com/tarantella/tta/webservices/client/apis/Resources.properties
    Edit all locations to point to https://localhost:443

  • How can i access the information of my central app server and my AS

    Hello i'm trying of configure my sld but when i'm about to create a technical system the wizard ask me for a central app server and App server (host and instance). where in my sap system can i found that information???. Sorry if the question is kind of obvious...i'm a beginner. Thanx in advance

    Hi
    SLD is for creating /Maintaining (including software product,components,etc..) system entries.
    e.g.
    If you want to create enrty for SAP R/3, Go to sld http://<hostname>://<port>/sld  >> technical system >> select type as WebAS ABAP >> enter the ipaddress of the SAP R/3 server
    You can get the details from your basis consultant or NW admin
    Cheers
    Jawahar Govindaraj
    PS:Reward pts

  • Changing where the sent messages are stored

    Hi, I was wondering is there any way you can change where the sent messages are stored. I have switched from a few programs.. and there is a 'sent' folder and ' sent messages' folder on my folder list in addition to that of what mail is putting them in. I just want one folder.

    Sounds like you are accessing an IMAP type account.
    If so, is this the only email account and account type you are accessing with the Mail.app?

  • Can't turn off Sent Messages display in Z30

    Pretty simple.  Love the phone.  Hate this problem.
    I can't turn off the Sent Messages display on my Hub.  Option is greyed out.
    this is for microsoft exchange outlook account.  My Z10 did not have this problem.  it is creating a great deal of clutter on my phone.  I want them to sync and be kept on my desktop.  I do not want to see the sent message in the hub.
    help please.
    -mike

    Nevermind.  I found it.
    Hub
    More
    Settings
    Display and Actions
    you can turn off the Sent Messages display.

  • I have an 8GB ipod touch and suddenly I'm able to access only the "sent" mailbox of Mail and not the other mailboxes.  I turned on and off.  I connected it to MacBook but still I can't access the other mailboxes.

    i have an 8GB ipod touch and suddenly I'm able to access only the "sent" mailbox of Mail and not the other mailboxes.  I turned on and off.  I connected it to MacBook but still I can't access the other mailboxes.

    - Try resetting the iPod:
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Can you access the mail on another device?

  • I can't access the contents of my email. I can see the message, but the email itself won't open.

    I can't access the contents of my email on my i-pad 2. I can see the message, but the email itself won't open.

    There are 3 things you can try:
    1.  Fully close you mail app.  From your home screen, press your home button twice to bring up your most recently used apps (task bar).  With your finger, hold it on any of those apps until they all start to jiggle.  You'll see a minus sign sign on the upper left side of each app.  Touch the on the Mail icon.  Touch your home button once more to stop the apps from jiggling and then again to return to your home screen. 
    2.  If that doesn't work, reboot your iPad.  Press and hold BOTH the power and home buttons at the SAME time for at least 10 seconds (hold past the red slider to shut down) until the Apple Logo appears, then let go of both buttons and your iPad will restart.
    3.  If that doesn't work, the last resort might be to delete this mailbox from Settings > Mail COntacts Calendars, then re-install the mailbox.
    I hope one of these suggestions helps.......

  • I deleted a pop email account from mail.  How can I recover those sent messages without Time Machine?

    I deleted a pop email account from mail.  How can I recover those sent messages without Time Machine?

    Thomas,
    "Note that you were warned that this would happen and approved it.  When you delete an e-mail account in Mail, you are shown a message like the following:"
    You didn't read my problem - I said I deleted a POP email account.  I always read the messages that pop up and in Mail when you delete a POP account - IT DOESN'T TELL YOU NUTHIN!  It just deletes it - which *** for me.  Fortunately, I had an iPhone and on that device I had about a 1000 messages that I could recover but on all my POP accounts I download them from the server onto my Mac so they were only on Mail (the really old ones that I wanted to keep.)  I had to move them into another directory one by one basically because when I would move 50 some of them would move and some wouldn't and I never did figure out that problem.  Basically the ones that would not move are the ones that were associated with my domain changes with GoDaddy, and there were a lot of those.  Have no idea as to why only those were resistant to moving but I can get all that data from GoDaddy anyway.
    This thread is now moot seeing as how I've recovered everything I can and am going to just move on - and back up more often.  ;-)
    Apple and Mail need to rewrite that program to include a WARNING MESSAGE when deleting an Account in Mail that says ALL YOUR MESSAGES ARE GOING TO DISAPPEAR NEVER TO RETURN IF YOU DELETE THIS ACCOUNT, SO YOU DANG WELL BETTER HAVE A BACK UP IF YOU WANT TO KEEP ANYTHING BEFORE PRESSING THAT MINUS SYMBOL!  ;-)

  • I have a problem with Mail on my Macbook Pro. It is configurated with a gmail account, and now I can't access the mail. Is it possible to reboot the account or..? Please help:)

    I have a problem with Mail on my Macbook Pro. It is configurated with a gmail account, and now I can't access the mail. Is it possible to reboot the account or..? Please help:)

    The question mark means the computer cannot find a bootable volumes so can;t do anything, That, combined with annoying sounds, strongly suggests a failed hard drive.
    You can ask a "genius" at an Apple Rtail Store to test it but I'm pretty sure the drive is kaput. I'm hoping you had your data backed up.

  • After upgrade my Iphone 4 to iso5, I can't add contact and I can't access the settings for mail,contacts and calender. The moment I select the setting for Mails, Contact and Calender it will jump back to home. Can someone advice what's wrong with it?

    After upgrade my Iphone 4 to iso5, I can't add contact and I can't access the settings for mail,contacts and calender. The moment I select the setting for Mails, Contact and Calender it will jump back to home. Can someone advice what's wrong with it?Problr

    Dear All
    i have done the same activity ( buy a new iphone 4 -> upgrade to ios5 - > configure email) with success-
    than when i start to move the contacts from old mobile to iphone (using the microsim) i receive the same crash
    in disgnosis e use i saw 2 dump with this title 'latestCrash-Preferences.plist and LatestCrash.plist. in each file the date is the same and i read:
    Exception Tyle: EXC_CRASH (SIGABRT)
    Exception code: 0x00000000, 0x00000000
    Chrashed Thread: 6
    in thread 6: name: Dispatch queue:
    com.apple.addressBookUI.ContactsSettingPlugin
    and thaan a lot of data.
    Have you any idea?
    thank in advance
    Fabio

  • I just switched from Outlook to Mail and now the sent messages are not being displayed.  Help, please.

    I just switched from Outlook to Mail and now the sent messages are not being displayed.  Help, please.

    Back up all data. Rebuild the mailbox.

  • I'm running logic pro 8.0.2 on Leopard 10.5.8. I've recorded an evening of live music, the cut the recording into songs using one audio file folder. When working on an individual song, I can't access the sampler.  I get the message "nothing to display"

    I'm running logic pro 8.0.2 on Leopard 10.5.8. I've recorded an evening of live music, then cut the recording into songs using one audio file folder ad multiple song files. When working on an individual song, I can't access the sampler.  I get the message "nothing to display" or "no region or audio file selected"  After much research on the web, I believe this is a permanent bug.  Does anyone have a good work-around for this type of work.  We record live 16T band rehearsals constantly and would love to be able to break individual songs out of the large file and be able to use the sampler.  Thanks in advance for your ideas!  Cheers.

    Another thing - if I copy one of the tracks to another track, then the sample editor works on the copied track.  I don't want to have to copy 16 tracks to new tracks to be able to use the sample editor on a project.  Thanks again.

Maybe you are looking for

  • After Up-Gradation to SharePoint 2013 Web Parts Stopped Working.

    Hi, I upgraded SharePoint 2013 from 2010. After up-Gradation my existing web-parts are no more working. I also tried after upgrading web part for 15 hive but still same issue. When ever I click on button it takes me to error page and shows message "

  • Printing Photos with AirPrint to Epson Px730Wd produces white edge

    All, I have just bought a new Epson PX730WD and have a small problem when printing photos via AirPrint.  I always get a 3mm white edge on the right hand side of my photos.  Printing the same photo from Epson iPrint app works fine and it works from my

  • EXTREMELY S-L-O-W text entry in some sections of a Pages 5.2 document

    Hello - I have recently bumped into a problem with Pages 5.2 (the most recent version) whereby at certain points in the document text entry becomes extraordinarily slow. In these sections, It takes 1/4 to 1/2 second per character for text to appear.

  • Load Balancing & Fault tolerance in Oracle Apps

    Hello I am pretty new to Oracle Apps and Oracle 9iAS We are trying to asked to find out the ways of deplying load balancing and fault tolerance in Oracle Apps I have gone thru the following articles of metalink and some more from google Configuring W

  • UNAUTHORIZED:401

    Hi Experts, We are getting failed messages for the below error in integration engine .After manually restarting the messages processed successfully from integration engine .I am using PI7.1 version . Please suggest me any parmanent solution for this


HashFlare