Can ms-6119w support 80G hdd?
I bought a new 80G hdd, but my ms-6119w mainboard cannot recognize it. how can i use it?
can i fdisk it in other pc, then put back to my pc?
Assaf: that's true, if you don't want to boot from the larger drive. However, in the case of wanting to boot, say from a 80GB drive, would it not be necessary for the BIOS to recognize the drive. I think if the BIOS does not recognize the BOOT drive, you're pretty much dead in the WATER.
I am beginning to BELIEVE in the case of the MS-6119, it's almost easier to get a RAID card, set the BIOS to boot from SCSI, and call it a day.
The RAID solution appears much EASIER than jumping through the MS 6119 BIOS confusion/FIASCO. NEVER another OEM board for me - ONLY RETAIL boards - the support IS soooo MUCH BETTER :D
Similar Messages
-
Can K7T Pro 2A support 80G HDD?
Hi people!
Can u people kindly advise me whether can this K7T Pro 2A support a ATA 100 80G HDD? i need to get a new HDD as the one i m using having bad sector. wat is the biggest HDD it can support???
Please help me. Thks alot!
Regards --- Maxhttp://www.msi-technology.de/produkte/produkt.php?Prod_id=99
--> 160GB max. -
How many HDD space can a Macbook support. (E.G. 1TB?)
I am gg to upgrade my HDD myself but i do not know can my macbook support if i install a 1TB hdd. Can anyone help?
It depends on which MacBook you have. The unibody MacBooks (Aluminum or late '09+ White) can handle a 1TB drive. If it's the White or Black pre-late '09 (non-unibody), then the largest right now is 750GB.
-
Satellite X200-245 can i install a second HDD
on satellite X200-245 : can i install a second hard drive ?
is it possible ?
There is a place for it but no sata connection on the mother board where can i find this connectorNo you cannot install the second HDD because there is no HDD connector which would allows to connect the HDD to the mobo.
And No, its not possible to upgrade the mobo with such connector.
The X200 has the two HDD bays because some X200 support 2 HDDs and some dont support it.
Your X200 doesnt support 2 HDD -
Can i put in second HDD into Satellite A300-1EG
Hello,
The question is can i put in second HDD to Toshiba A300-1EG notebook, there is a place for one as I found, and what HDD should it be, i mean 2,5" and etc?
As I read, there can be no connection for HDD, all depends on model, how can I found out?
Thanks.Hi
You can check this yourself.
Remove the plastic cover which secures the second HDD bay.
If there are some HDD connectors then you could install an second HDD.
If the connectors are missing, then you will not be able to use second HDD.
I know its a little but confusing because of the second HDD bay but the point is that different A300 models supports different motherboards and not all motherboards are equipped with two HDD controllers.
Greets -
Satellite Pro P300-26U - Can I use a second HDD?
Satellite P300 family support raid0 and double HDD. All model? User manual of 26U don't say any word about this. Model like P300-1BP has double HDD.
Can someone help me? I want to buy a P300-26U in Italy.
Thanks.
GuidoHi
The Satellite P300 series doesnt support RAID!
There is NO RAID controller on the motherboard.
But you are right; the Satellite Pro P300-BP supports 2 HDDs but this does not meant that it would support RAID!
Furthermore you should know that P300 series supports different hardware specifications.
This means that not all P300 would be able to use 2 HDDs!!!
It could be possible that Satellite Pro P300-26U is not able to use 2 HDDs even though the Satellite Pro P300-BP support 2 HDDs. -
Can I install a 2nd HDD in my Satellite P200-10C?
Hi
I have a Satellite P200-10C which I want to upgrade with a 2nd HDD. I called a Toshiba representative who told me my model doesn't support an other HDD. But then again, why does it have a place in the back of the laptop for a 2nd one?
Could some one tell me if it can be used to accommodate a 2nd HDD.
Thanks in advance
Gerardo@Jayjay
I finally decided to open the compartment for the 2nd HDD of my Satellite P200-10C. I discovered there the modem (I think) and enough space to accommodate a HDD but alas! No connector for the HDD. I think that settled the matter. I can not have a 2nd HDD. Unless of course someone in the future find a way to attach a connector.
Thanks for your answer, Jajay
Gerardo -
Can I add an external HDD Drive to my Satellite L300-110?
How can I add an external HDD Drive to my Toshiba Satellite L300-110 laptop and does Toshiba supports adding such type of HDD Drives to the laptops?
Hello
External HDD can be connected to every PC or notebook. External HDD will be connected to USB ports. On this picture you can see how it looks like. -
Can 915G Combo support DDR2-800 ?
Hey ~~every1
My Motherboard is 915G Combo MS-7058 BIOS ver 1.6 which support both DDR1 & DDR2. Now i just consider to upgrade DDR2 Module. Can My Motherboard support the latest DDR2 667 or 800 ? There is a news that Infineon will start to produce DDR2-800 in June that 512MB DDR2-800 will be price at $93.
Here is Comp Spec
MSI 915G Combo MS-7058 BIOS ver 1.6
LGA775 Intel 540 Pentium 4 3.2Ghz
Kingston 512MB DDR400(Single Channel)
40 HDD Samsung (PATA-Spinpoint)
SW-252B Samsung Writer
Prolink V.92 Modem
PowerSupply 480W (20 Pin)The ram should run OK, just not at it's maximum speed. For you CPU the optimum speed is DDR400.
I have my doubts that DDR2 800 will be available for under $100, but I have been wrong before
Do you intend on buying two sticks or one? If only one, stick with what you have now. If two I think you need to decide if what you are purchasing will perform any better than buying for more stick of DDR 400. Performance wise I don't think so. -
Can an IMAC support multiple iclouds, i.e. can each family member have their own cloud
You can do this, but each family member will need a separate email address in order to set up an iCloud account; and each will need their own user account on the Mac in order to keep the iCloud accounts separate.
-
Can I use iMac's HDD as a second, bootable drive for new PC?
When I replace an old PC with a new PC, I always keep the old HDD around in case I need to boot into it for some reason. I simply plug it in, select it as the boot drive, and it's sort of like using my old PC again.
Can I also do this with my iMac's HDD and a new PC? So I could effectively dual boot between my existing Windows OS on my PC's SSD, and OSX using my old iMac's HDD?
When I do this with two HDDs each using Windows, all the drivers for the new hardware "plug-and-play" the first time I boot with the old HDD, so input and display works. I'm not sure if I'll have the same luxury in this scenario or if I'd need to pre-load new drivers so OSX works with the PC's hardware. My iMac has a AMD (well it was still ATI back in 2009) Radeon HD 4850. I had this same card in an old PC so I would hope the display would still work as well, or worst case scenario I could simultaneously use the iMac HDD with the Radeon 4850 in a PC.
I have a lot of computers sitting around and I'm moving soon, so I want to consolidate what I can so I don't have to take so much with me when I move. My iMac's display is no good (barely functional, definitely not pretty) so I don't want to keep the big iMac around anymore if I can just keep the little HDD.
Of course I back up important files and can always read the HDD from a PC, but I'm interested in seeing if I can still use the drive for booting into OSX.
I'm sure someone's tried to do this before, but my searches turned up with nothing. I'll greatly appreciate any guidance, suggestions, or general thoughts about how I could achieve this. I don't mind getting my hands dirty if a solution exists but isn't simple. Thanks in advance for your input!Hi, are you talking about removing the drive from the iMac to use in a PC?
If your talking about booting the PC into OSX, then google hackintosh. -
I have a hard time understanding why I can't contact support about THEIR problem. I plugged my iPhone into my pc. iTunes came up. It said there was an update available for the phone. I accepted that. Clicked on the "download only" because I didn't have the time to install it at that point. It downloaded but didn't stop. It continued to the 'backing up your iPhone' segment then froze. I waited at least an hour with no change. Finally I unplugged my phone..iTunes wasn't responding.I rebooted my pc then tried the same thing again. Same outcome even though I let it "Back Up" for 7-8 hrs while I slept. Same Story............... iTunes 10.4.0.80 is the software I'm using. When my phone is 'plugged' in what I see on it's face is "Sync in Progress".....for hours!
Error 1611
This error typically occur when security software interferes with the restore and update process. FollowTroubleshooting security software issues to resolve this issue. In rare cases, this error may be a hardware issue. If the errors persist on another computer, the device may need service.
Synced media like apps and music are not included in the iPod backup that iTunes makes. You can redownload iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
With SP16-17 we can't create support message from satellite system anymore
hello,
We have implemented the support package 16 and 17 SAPKITL427 in solution manager last week-end and since then all satellite systems can not create support message anymore.
The process is perfectly working in solman itself and we don't think we have thus a process customizing issue here but who knows...
The key user creates the message with the help -> create support message
and when he saves it (clicking the mailbox button) he gets the following error
Error in Local Message System: Function not available Message was Not
Created
In fact the error Message is BCOS088
We debugged the function BCOS_CREATE_MSG and we found out that the function
DNO_OW_CREATE_NOTIFICATION is returning error code 1.
We checked out RFC connection and it looks ok
There is no dumps in ST22, no error in SLG1 in both system...a nightmare
The notification SLF1 is created in solman but the status field of the notification is empty and it looks that the record is somehow corrupted because you can't modify it with dnotifwl.
Due to the fact that the notification is not correctly created the support message is also not created.
SAP and our solman consultant are working on it since 2 days but don't have a clue. Maybe some program where no regenerated correctly ?
If you would have any idea in which direction to look, i would greatly appreciate
thanks a lot
best regards Xavierhi Rohit,
on the satellit I have the following versions
SAP_BASIS 700 0012 SAPKB70012 SAP Basis Component
SAP_ABA 700 0012 SAPKA70012 Cross-Application Component
PI_BASIS 2005_1_700 0012 SAPKIPYJ7C PI_BASIS 2005_1_700
ST-PI 2005_1_700 0006 SAPKITLQI6 SAP Solution Tools Plug-In
SAP_BW 700 0013 SAPKW70013 SAP NetWeaver BI 7.0
SAP_AP 700 0009 SAPKNA7009 SAP Application Platform
SAP_HR 600 0018 SAPKE60018 Human Resources
SAP_APPL 600 0010 SAPKH60010 Logistics and Accounting
EA-IPPE 400 0010 SAPKGPID10 SAP iPPE
EA-APPL 600 0010 SAPKGPAD10 SAP Enterprise Extension PLM, SCM, Financials
EA-DFPS 600 0010 SAPKGPDD10 SAP Enterprise Extension Defense Forces & Public Security
EA-HR 600 0018 SAPKGPHD18 SAP Enterprise Extension HR
EA-FINSERV 600 0010 SAPKGPFD10 SAP Enterprise Extension Financial Services
FINBASIS 600 0010 SAPK-60010INFINBASIS Fin. Basis
EA-PS 600 0010 SAPKGPPD10 SAP Enterprise Extension Public Services
EA-RETAIL 600 0010 SAPKGPRD10 SAP Enterprise Extension Retail
EA-GLTRADE 600 0010 SAPKGPGD10 SAP Enterprise Extension Global Trade
IS-PS-CA 600 0010 SAPK-60010INISPSCA IS-PUBLIC SECTOR CONTRACT ACCOUNTING
IS-OIL 600 0010 SAPK-60010INISOIL IS-OIL
IS-M 600 0010 SAPK-60010INISM SAP MEDIA
IS-H 600 0010 SAPK-60010INISH SAP Healthcare
IS-CWM 600 0010 SAPK-60010INISCWM Industry Solution Catch Weight Management
INSURANCE 600 0010 SAPK-60010ININSURANC SAP Insurance
FI-CAX 600 0010 SAPK-60010INFICAX FI-CA Extended
FI-CA 600 0010 SAPK-60010INFICA FI-CA
ERECRUIT 600 0010 SAPK-60010INERECRUIT E-Recruiting
ECC-DIMP 600 0010 SAPK-60010INECCDIMP DIMP
IS-UT 600 0010 SAPK-60010INISUT SAP Utilities/Telecommunication
SEM-BW 600 0010 SAPKGS6010 SEM-BW: Strategic Enterprise Management
LSOFE 600 0010 SAPK-60010INLSOFE SAP Learning Solution Front-End
ST-A/PI 01K_ECC600 0000 - Application Servicetools for ECC 600
APICON 1470000000 0000 - APICON GmbH, Interface Add ON
thank you Xavier -
Can Time Capsule support an additional external hard drive?
A friend of mine is using Airport Extreme and has both his printer and external hard drive hooked through it accessing both wirelessly. The Apple site says this works great with Extreme but does not say you can do the same thing with Time Capsule. I called our local store and she wasn't sure. Both Extreme and Time Capsule have one USB port so no matter what, you have to split the USB(I know this works with Extreme). All my music is on an additional hard drive and it would be great if I could access it wirelessly. If anyone has done this with time capsule please let me know. I want to purchase it but if not I will go with Extreme.
Can Time Capsule support an additional external hard drive?
Yes.
(41832) -
Can I fit a 1TB HDD into a MacBook Pro 17" 2.4GHz which was released in mid 2007? There are 1TB HDD available but they are 12.5" high. Will they fit this model MacBook Pro?
Sorry, 12.5mm high not 12.5" high!
Can I fit a 1TB HDD into a MacBook Pro 17" 2.4GHz which was released in mid 2007? There are 1TB HDD available but they are 12.5mm high. Will they fit this model MacBook Pro?
Maybe you are looking for
-
Purchase Order Idoc Issue - PORDCR103
Hello Experts, I have one PO and 5 PO Items in my source. I sent Idoc(PORDCR103) to SAP from SAP BODS4 successfully and I was expecting to see 1 PO with 5 items But I saw 5 PO's were created with 5 items each instead of 1 PO with 5 items. Please find
-
Sender SOAP EOIO Queue - Urgent
Hi all, Could any one help me with this. We have a scenario, where we send Mat. Master data to R/3. There is a thrid party app from which a SOAP request is sent to R/3 as there is webservice exposed on XI. When the SOAP sender adapter sends the soap
-
High availability for a website
I have an entry on a DNS server for a domain "aa.bb.test.com" which points to 1.1.1.1 which is VIP address on the CSS at the primary site. i would like to add another css at another site as a backup. What exactly I have to do to configure the other c
-
Why can't I delete mail from my iPad?
I can delete about ten of the messages but after that the edit/delete button doesn't work and sends me out to the first page where all the icons are. And when I get to the first page, the mail icon still has the same number of incoming mail listed.
-
App Builder/Run Time Install Broke?
I have full up version of LabView 5.1.1, running on Win98. I went through the Application Building Example on page 12 of the Application Buidler release notes. I then installed the sample app on another Win98 box. The application installation went OK