Can no longer connect to Extreme remotely

Also therefore cannot connect to my usb hard drive.
I am on dsl.
It worked just fine for about 10 days, then could no longer see the Extreme (or usb drive) from a remote location. Unplugging the Extreme and plugging back in fixed the problem for a few days, then it returned and unplugging did not fix the problem. (I intially set up with a guest network but had to use the NAT & DHCP to see the usb drive). Blinking amber light.
I tried re-setting up the network from scratch using bridge mode. Steady green light, but it does not matter, still no remote connection.
Everything shows up fine when I am connected to my own network but I see nothing when working remotely. Extreme works perfectly with computers, Apple TV, printer when connected to my own network.
I've read documentation, forums, etc. What am I doing wrong? Is there some setting I've overlooked?

JEM24 , your suggestion is included in:
- iOS: Troubleshooting Wi-Fi networks and connections
Turn your Wi-Fi router off and on2. If your ISP also provides cable or phone service, check with them before attempting this step to avoid interruption of service.
JEM24 wrote:
Sorry Mindi, also have your tried rebooting your router? That's all. Try that before you attempt to Restore. Cheers.

Similar Messages

  • Yosemite 10.10.1 Update - Can no longer connect to Windows Remote Desktop

    I use Mac's VPN to create a PPTP VPN connection to our Windows Server at work.  I access the Server using the Microsoft Remote Desktop App from the App Store (v 8.0.10).  After upgrading to Yosemite, I could get the VPN to connect but could not get the Microsoft App to connect to the Server.  I fixed this problem by deleting the VPN Connection and setting it up new from scratch.  It worked fine until the 10.10.1 upgrade.  Now it no longer works and my previous fix does not work.  I also noticed that I totally lose internet connectivity when the VPN is connected - Safari and Outlook Windows app show no internet connection.
    Microsoft App error is :
    Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
    Please help this has broken with both Yosemite updates and now I am up a creek and unable to work remotely.
    Thanks,

    I've only one hint to you, cause I've mot on Mac-Server.
    With 10.7 Apple have switched from Samba (maybe due to licence problems with GPL based stuff) to a own protocol called "XSMB"
    This had caused problems with some NAS systems too.
    Eventually someone have a glue to solve that, as several users have problems with SMB shares since that.
    Lupunus

  • Airport extreme. XP outlook can no longer connect

    Since October My wife and I can no longer connect to our office servers using outlook on PC's via Airport extreme wireless. Both our g5 and g4 have no problems.
    The PC's indicate excellent signal and status says "connected "thru our VPN connections to the office.
    Both PC's suddenly stopped working this connection thru outlook and the internet.
    I noticed many discussion people are in the same boat.
    What happened?
    Seems odd this is not getting much remedy information.
    Sounds widespread.
    Are there truly any technical resolutions?
    I suspect something in the latest XP updates, CAT login patches etc.
    My IT office guy is an amazing craftsman and he could care less about a Mac router.
    They ("Windows" OS people) are so sure of themselves...little hope they might suspect there own equipment.

    Two things to try:
    ...Ensure the appropriate NLTM authentication is enabled? Probably NLTMv1.
    Server Admin -> Open Directory -> Settings -> Policies -> Authentication
    ...Ensure that the Microsoft Windows XP clients have a compatible authentication requirement?
    This security settings authentication downgrade is set via an msc widget on the higher-budget Microsoft Windows XP variants, or directly via the LMCompatibilityLevel registry knob available within all Windows variants.
    With the upper-budget Windows versions, you can run the secpol.msc tool, navigate to Local Policies - Security Options, then to Network Security: LAN Manager authentication level, then (if the box is set this way) switch from "Send NTLMv2 response only" to "Send LM & NTLM - use NTLMv2 session security if negotiated".
    On all Windows XP versions including the lower-budget versions, you can use regedit to switch the HKEYLOCALMACHINE\ SYSTEM\ CurrentControlSet\ Control\Lsa registry key value LmCompatibilityLevel to 1

  • TS1741 i lost my appletv remote & can no longer connect to it with my iphone app. is there any way that i can reconnect with my iphone app without having to buy a new remote?

    i lost my appletv remote & can no longer connect to it with my iphone app. is there any way that i can reconnect with my iphone app without having to buy a new remote?

    Doubtful - why did the Remote app lose connection?

  • Can no longer connect to remote server via VPN

    I recently installed OS 10.5.8, and have found that I can no longer connect to my server at work. The VPN itself (via PPTP) works fine, it's just that when I try to connect to the remote server (via Connect to Server) I get a dialogue saying 'A volume failed to mount.' A further dialogue says 'Sorry, the operation could not be completed because an unexpected error occurred. (Error code -6602)'
    Has anyone found a way around this, please? I'm disabled and I need to be able to work from home – without the connection I'm stuffed! Obviously I've tried rebooting the machine etc, but nothing seems to help.
    Thank you for any assistance you can give.
    Kitty.

    For some random reason this connection has begun working again – please ignore the question!

  • Hi - for some reason, my IPAD3 mail client has decided it can no longer connect to my Exchange server.

    Hi - for some reason, my IPAD3 mail client has decided it can no longer connect to my Exchange server.  It's worked like a charm for weeks.  Any thoughts?
    For the record, I've got a POP mail account that is working fine on the machine and the WIFI is up and running (Safari is loading fine).
    Thanks

    Hi Jim,
    Your issue is the most FAQ in the forums, it is an ongoing problem with Tiger waiting to be fixed by Apple. Till then, forget your aliases and use either Command-K or from the Finder Go-->Connect to Server and enter the remote Mac's IP address to connect.
    Also, Open Utilities-->Terminal and type lookupd -flushcache (Press Return) and reboot. Do this for both macs.
    Macs running 9.x, Macs running 10.4.x, SGI workstations running Irix 6.5.x

  • How do i wipe my old phone if it can no longer connect to the internet? I enter my passcode and apple id, but 'verification fails' as there is no internet connection???

    how do i wipe my old phone if it can no longer connect to the internet? I enter my passcode and apple id, but 'verification fails' as there is no internet connection???

    Hi, JTCW33. 
    Thank you for visiting Apple Support Communities. 
    If you still have possession of the iPhone you wish to wipe, here are a couple articles that will walk you through the process. 
    What to do before selling or giving away your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/HT5661
    iOS: Unable to update or restore
    http://support.apple.com/kb/HT1808
    If you no longer have access to your device, it will need to be connected to the Internet in order to remote wipe the device. 
    iCloud: Erase your device
    http://support.apple.com/kb/ph2701
    Cheers,
    Jason H. 

  • IMac Can No Longer Connect to the Internet

    My parents use a 2006 Intel Core Duo iMac (the 17", 1.83GHz model) running OS 10.6 (Snow Leopard). They typically connect to the internet using a wireless network set up using an Airport Extreme with RCN as their ISP.
    As of yesterday, the computer can no longer connect to the internet, while all other computers in the house, both Mac and PC, still can. I've tried power cycling the modem and the router, connecting using ethernet, and connecting the computer directly into the modem. Thus far, none of these attempts have succeeded. I've taken a look at the network settings for the computer and while networking is most certainly my thing I wasn't able to detect a change. As a last ditch attempt I tried using Google's public DNS service, rather than RCN's default, but that made no difference, so I've reverted it.
    I realize that the information available in this thread is almost certainly too little to guess at what the problem might be, but I'm more than happy to fetch information that might be helpful in finding a solution.
    Thanks for taking the time to read the problem; hopefully there's an obvious solution.

    JJ247 wrote:  I typically say a restore would correct any software issues but your drive is dead.
    "Drive is dead????" what in this thread gives you that idea? What card might be failing?
    Agent: do you have any Input Managers (might be called Input Methods) either in the Home Folder/Library or in the HD/Library (not /System/Library.)
    Yes, do try another Account and test for this there.
    I know you've already tried Google DNS, but try OpenDNS
    You don't need to go to the OpenDNS site to use OpenDNS. Simply open Network>Advanced>DNS in Sys Prefs and enter the following numbers for the interface you use, e.g. Airport or Ethernet,
    208.67.222.222
    208.67.220.220
    Hit OK and then Apply. Make sure those numbers are entered above any others you may have there.
    To check to see if it's working
    http://www.opendns.com/welcome/

  • Can no longer connect iPad Mini 2 to iPhone 6 Personal Hotspot (iOS 8.1.2 on both)

    I can no longer connect my iPad Mini 2 w/ iOS 8.1.2 to connect to my iPhone 6 (iOS 8.1.2, Verizon Wireless) running Personal Hotspot.The iPad displays the error "Remote Hotspot Failure - Unable to start personal hotspot "iPhone.  However, my Windows 8.1 laptop connects to the iPhone just fine. The iPad connection problem occurs with or without the Windows laptop connected or even turned on.
    Both the iPhone and iPad have Bluetooth and WiFi on, and the iPhone has Hotspot active. The iPad shows the iPhone Personal Hotspot on the WiFi Settings page, but throws the error each time i attempt to connect. Additionally, the iPhone shows 1 Connection on Personal Hotspot even though I have no devices connected. I have reset my network settings twice on both the iPhone and iPad.
    BTW - I used to be able to connect the iPad to the Hotspot prior to updating to iOS 8.1.2 on both devices.

    Forgetting the hotspot on the iPad sent me in the right direction. I now have it working correctly, and seem to have diagnosed the cause.
    The cause seems to be that I had connected the iPad to the Hotspot via Bluetooth. Once I figured out how to delete that link, I was finally able to connect to the Hotspot. Here is what I had to do:
    On the iPhone:
    - Turn on WiFi and Bluetooth
    - Turn on Personal Hotspot and change the Hotspot password (this may not have been necessary, but things are now working)
    On the iPad:
    Reset all network settings:
    Settings -> General -> Reset (at bottom of page) -> Reset Network Settings (deletes all known networks and their passwords and restarts the iPad)
    Turn on WiFi and Bluetooth (I had found that Bluetooth must be on is necessary in some other research)
    DO NOT CONNECT TO THE PERSONAL HOTSPOT USING BLUETOOTH - DON'T GO THERE!
    Connect to the Hotspot using WiFi
    Settings ->WiFi
    - Wait until you see "iPhone" under PERSONAL HOTSPOTS (or maybe CHOOSE A NETWORK)
    - Select "iPhone"
    - Enter the (new) password that you set on for the PERSONAL HOTSPOT on the iPhone
    You should now be connected via WiFi
    Bottom line: Unless you have some VERY compelling reason to connect to the Hotspot via Bluetooth, NEVER do it. WiFi speed is multiples that of Bluetooth. With WiFi using Broadband Speedtest over Verizon LTE - 2 bars/dots - I am consistently getting between 15 and 20 Mb download and 3-15 Mb upload. With Bluteooth using the same test, I was getting about 1 Mb maximum upload and download.
    I hope this solves the problem for all reading this thread. And thank you ManSinha for the helpful clue.

  • Can no longer connect wirelessly with other computers

    I have an iMac and a Macbook Air.  For some reason I can no longer connect wirelessly between the two. They don't show up in Finder.  Therefore I can't use "Remote Disk" on my Macbook Air to install programs.
    Recently I switched from using an Airport router to a Cisco router. Could this be the problem? I can still connect to the internet through my wireless network, but can't find my computers.

    Hello,
    All the information you need is printed on the back of the Hub. There are two passwords, one for the Wireless setting (WPA password) and one for access to the hub (Admin password).
    (Taken from http://www.jarviser.co.uk/jarviser/images3/newhubpswd.jpg  ).
    If you have forgotten what you changed the admin password to, then I'm afraid you're lost and you should factory reset your Hub:
    http://bt.custhelp.com/app/answers/detail/a_id/11386/~/how-do-i-reset-my-bt-home-hub-to-its-factory-...
    Hope this helps

  • After upgrade to 10.7.1 users can no longer connect to shares

    Ok , im not an admin to start off, but after upgrading the OSX lion server to 10.7.1 i can no longer connect to the sharepoints on my mac mini server.
    Through SMB or AFP .. i tried using the connect to server on one of my clients and when i attempt to log in , it shakes the login window as if my password were not accepted.
    Heres where it gets a little confusing to me, i have 2 mac mini servers both running OSX LION SERVER 10.7.1 .... The one that I CAN NOT LOG INTO is my OD Master... the second one is just used for file sharing...
    WHEN i attempt to login into the file share server (which is connected to the OD Master which is rejecting my user logins) i can connect JUST FINE and access the sharepoiints on that server...
    A couple more weird things... on the OD MASTER (again the server which is rejecting all user logins) I CAN login with my admin credentials and access the sharepoints... ??
    -- when i am locally logged into the OD MASTER server, if i add a new sharepoint from scratch and edit the ACL , NONE OF MY USERS SHOW UP nor any of my user groups... it only allows me to add the Administrator access to that share..
    Have i done something very wrong somehwere? this server that is having a problem is only used as a OD master and File share nothing else..
    I did not change any settings besides add a new mac mini server to the OD and performa the 10.7.1 upgrade.
    ANY HELP WOULD BE HUGE as i have spent a 12 hours trying to figure this out before i resort to a re install.

    I've only one hint to you, cause I've mot on Mac-Server.
    With 10.7 Apple have switched from Samba (maybe due to licence problems with GPL based stuff) to a own protocol called "XSMB"
    This had caused problems with some NAS systems too.
    Eventually someone have a glue to solve that, as several users have problems with SMB shares since that.
    Lupunus

  • Can no longer connect to certain shares after upgrading to 10.8.4

    After upgrading to the latest version of Mountain Lion, I can no longer access certain shared volumes. I have one machine running 10.4.11 and I can connect to its hard drive. Another machine on my network runs 10.5.8, and I can now only connect to the built-in hard drive. There are also 2 Firewire drives connected to that (10.5.8) machine that I can no longer connect to.
    When I use "Connect to Server" and enter the AFP address of the 10.5.8 machine, I get a full list of "available" shares, but if I select one of the FireWire volumes, I just get a spinning "rosette" for several minutes and then a failure message. I also have an OS 9 machine that I can no longer connect to on the same network.
    I already read the "Connecting to Legacy Systems" notice and still no joy after following the instructions.
    Can anyone help?
    Thanks!
    Jon

    No NAS other than an Apple one includes native support for AFP. They all use an open source package called Netatalk that is junk. Many years ago Apple deprecated the old security modules that Netatalk uses.
    The easiest solution is to hack up Lion so that it will connect with the old security protocol. Do a search for "lion dhx2" or something like that. Another option is to update your NAS to a version of Netatalk that includes support for DHX2. That is easier said than done. Netatlk isn't as "open" as other open source packages.

  • Can no longer connect to my network and 'forget network' option has disappeared??

    Can no longer connect to my network and "forget network" option has disappeared???  (Ipod touch 5th generation). This happened on both my children's ipods. We have reset network settings but it doesn't help.

    JEM24 , your suggestion is included in:
    - iOS: Troubleshooting Wi-Fi networks and connections
    Turn your Wi-Fi router off and on2. If your ISP also provides cable or phone service, check with them before attempting this step to avoid interruption of service.
    JEM24 wrote:
    Sorry Mindi, also have your tried rebooting your router? That's all. Try that before you attempt to Restore. Cheers.

  • Following upgrade to osx 10.8.2 on my mac mini I can no longer connect to icloud, I wouldn't mind so much but I have come to rely on th eicloud services to manage my work and home services, has any1 else experienced this and has any1 any solutions?

    following upgrade to osx 10.8.2 on my mac mini I can no longer connect to icloud, I wouldn't mind so much but I have come to rely on th eicloud services to manage my work and home services, has any1 else experienced this and has any1 any solutions as this is messed up all of my work relations?

    Had the same problem this morning after updating to 10.8.2. Mail was finding my dot-mac account as always, but System Preferences popped up and said my iCloud password was incorrect. Did the "forgot password" reset, but still had the same problem. Then I went to icloud.com in Safari, logged in with the new password, it worked no problem. So I went back to the icloud preference pane, signed out of icloud, answered yes to all the warnings about data being deleted from my mac, blah blah blah, then re-signed in to icloud. Everything worked. I did have to set up my icloud account in Mail again, which now lists the account mailbox as "iCloud", and not "mac.com" as it did before. But so far, everything is working (fingers crossed.)

  • Apple TV can no longer connect to network after upgrade.

    I had heard that lots of people were affected with this problem with the software upgrade before this one so I deliberately waiting until this one came out before taking a chance. I was wrong.
    After updating to 4.4. (3140) I can no longer connect to my network. It says there was a problem and gave the error messaged number: (5) in brackets.
    I've had nothing but problems with both Apple TV's that I have owned, version 1 and this new version 2. I've a good signal from my router and I've used three different ones over the time I've had the two apple tvs.
    Anyone got any ideas.
    I can't connect the apple tv directly because they are too far apart in the house. I can only connect by wifi.
    There is nothing wrong with my wifi because I'm connected to it fine though my imac, iphone and ipad and laptop, (not all at the same time)

    Ok, here's a solution, courtesy of our friends at AppleCare.  
    Unplug the router for 90 seconds.
    I was running ATV2 with a Time Capsule.   The TC thought the ATV was still connected using its former IP address so wouldn't let it reconnect with a new one.
    Hope this works for anyone else with same problem.

Maybe you are looking for

  • Invoking an external webservice in OBIEE 11G

    I'm trying to create a very basic action to invoke an free external web service. But no matter what WSDL URL I use, I'm getting a SOAP Invocation error saying "Failed to read wsdl file at https://.... " I've used the following test URLs, but both res

  • Will reinstalling iphoto 6 help?....

    I have iphoto 6 on my iBook G4. Could something have happened when I installed it to cause the editing tools not to work properly? And, also, to cause me not to be able to email pics to anyone with AOL? Everything was fine with iphoto 5....then I wen

  • Problem with Address Line 2 in Contacts

    I am currently syncing my contacts with my Yahoo mail.  The problem that I am having is that we live in an area where most people have an Address Line 2 (Usually their PO Box).  I am able to enter their PO Box into the Address Line 2 field in contact

  • Unable to pan image view properly

    I'm trying to enable my image control to be pannable in all drections am able to pan but can only pan horizontally and vertcially. What can be done in order to achieve the functionality of panning an image in any direction? <ScrollViewer x:Name="Imag

  • Volver columna a enum o similar.

    Hola buen dia! Me gustaria pudieran ayudarme con lo siguiente: de una columna en una tabla de la base de datos, necesito extraer los datos para con ellos crear un menu desplegable en un control, es decir como si fuera un control ENUM solo que las opc