Can no longer print to Canon printer connected to Airport Extreme

My Canon MP830 is connected to my Airport Extreme. Bonjour on my Windows 7 Acer laptop sees and installs the printer. I have been printing to the MP830 successfully from wired and wireless computers on my network this way for around a year. Today, I can no longer print to the MP830 unless I connect it directly to a USB port on my Acer. Bonjour can still see and install the MP830 when it's connected to the Airport Extreme, but I can't print to the MP830.
Any ideas?

Sounds a bit like a problem being discussed in this thread:
http://discussions.apple.com/thread.jspa?threadID=2651093&tstart=0
I suspect some kind of update is at fault. Like you, my printer/base station setup had been working fine until recently.

Similar Messages

  • HP Laserjet P1102 print  multiple pages - USB connected to Airport Extreme -

    Hello,
    My configuration is Windows Vista/7 - Bonjour Print - HP LaserJet P1102 USB connected to Airport Extreme.
    Everytime I sent a print job - it get printed endless times until I hit "Cancel" on the print queue.
    Help anyone..
    Thank you very much,
    - eagleputt

    Hi gingerjedi,
    It's normal with your actual Airport and confirm by Apple, but ...
    Only If you see your printer in Airport Admin Utility under Printer :
    1) Download and install : http://www.openprinting.org/download/printdriver/macosx/foomatic-rip-2008-01-30. dmg
    2) Download and install : http://www.openprinting.org/download/printdriver/macosx/gplgs-8.61-ub.dmg
    3) Download and install : http://www.openprinting.org/download/printdriver/macosx/hpijs-2.7.10-UB.dmg
    4) Repair permissions with Onyx or with your Install Disk
    5) Restart your computer
    6) Restart your connection with your Printer (Cable-Power-Connection with your Airport)
    7) In Prefs Panes, select Printer ( + ) and install a new Printer
    8) Select your indicated Printer in the menu choice. If you have a Name for your Airport, give this Name under Place or Emplacement (excuse, i am French) and select HP Deskjet D2400 Foomatic/hpijs (recommended).
    9) And click Done
    With this Solution, you can just print. All other software possibilities can not run under the Airport. It is normal.
    I think all is ok for you.
    Message was edited by: thebuzzman

  • Mac Mini won't print via ethernet cable connected to airport extreme

    Hi. Thanks for your input in advance. Am about to start throwing things around. I have an Airport Extreme based network which is working fine. The printer is a new HP L7590 which connects to the network with a USB cable connection to the Airport Extreme. Those with laptops and wireless cards are able to print no problem. However my Mac Mini, a 1.25 GHz PowerPC G4 is connected to the printer using a ethernet cable connected to the Airport Extreme. All was working perfectly until I upgraded from Panther to Tiger. I am now running 10.4.11. Now the Mini will not print. The jobs keep stopping. I have removed the printer and try to add it again. The print browser page finds the printer okay and lists it as connecting via Bonjour, but when you tell it to add it, it starts 'searching for new drivers' and then 'gathering printer information' and then it stops responding and I have to force quit it. Any suggestions?? I have already tried all the online mac help suggestions.

    Actually it transpires that the G4 laptops are not printing either now.

  • Canon MP500 connected to AirPort Extreme won't communicate with my desktop

    My Canon Pixma MP500 (which we really like) is connected to my new AirPort Extreme Base station via the USB port. My PC is attached via network cable to the base station. I have a MacBook. When printing to my printer from my PC, the printer doesn't communicate back to the PC that it is printing. Plus, I have lost the ability to determine the ink levels. I'm sure all of this is tied to bidirectional communication between the printer and the computer. Both of my computers (desktop PC and MacBook) print to the printer with no problem, but I have lost the other features. I can't scan on my printer now with the MP Navigator software. For example, when I print from the pc, there is an error message that the printer is not available, even though it prints ok.
    Is there any way to leave the connection the way it is and to modify the AirPort Utility software to allow the bidirectional communication with the printer? Any other advice? I bought the AirPort Extreme base station to have printing from my MacBook, now I think I have mis-spent the money.
    Thanks in advance.

    Hi,
    interestingly enough I have the very same problem with a Canon MP830. My Windows PC and MacBook Pro running XP as well will happily print but there is no feedback.
    But I also had this problem with different non-Apple access points with integrated print server. So this seems not to be a special Airport Extreme problem.
    Canon support told me to buy a Silex print server.
    Hope someone can resolve this.
    Regards,
    Wolfgang

  • Can a PC share a hard drive connected to Airport Extreme?

    I have a new Airport Extreme with a Seagate FreeAgent Desk for Mac 1.5 TB hard drive connected via USB. The Airport connects to the internet via a Linksys Vonage router, and two Macs are set up to use the Airport via wireless. The FreeAgent drive has 4 partitions: 1 for a TimeMachine backup from both Macs, 2 for SuperDuper backups of both Macs, and 1 for home video files and other backups. I also have a Dell PC running Windows XP SP2 hardwired to the same Linksys Vonage router.
    I'd like to use partition 4 on the FreeAgent drive to backup the PC. Is this possible, and if so, how do I get the PC to recognize the FreeAgent drive?
    Thanks very much for your help.

    dwhewlings, Welcome to the discussion area!
    Yes, you need to use Bonjour for Windows.

  • Can't Delete Files on USB Drive Connected to Airport Extreme

    I'm trying to delete some files on a USB drive connected to my Airport Extreme, but I keep getting a error message that I don't have sufficient privileges to do so. I've tried super deletion applications like FileXaminer, without any success. What other methods are there?

    Thanks for the info.
    Were you using the drive for Time Machine backups, by chance? Time Machine backups are stored in a different format when the disk is connected directly to a computer. So, you won't be able to continue to use the old backups when the drive location is changed.
    You might want to check the drive by connecting directly to your Mac and running Disk Utility to "Verify Disk" and "Repair Disk" if indicated.
    Even if the drive has it's own power supply, a powered USB hub is usually needed on the AirPort Extreme because the power at the USB port is quite limited.
    Message was edited by: Bob Timmons

  • Can Time Machine backup a USB drive connected to Airport Extreme?

    Hi all,
    I have an airport extreme that I used to run a shared USB drive for the family. I have a network drive attached to the airport extreme which I used for Time Machine backups, how do I tell Time Machine to back up the USB drive also?
    All help very gratefully recieved.

    Thanks for your reply,
    When I open Time Machine preferences I can either select a different disk to use as the backup disk or exclude items from the back up. I cannot find an option to add the USB drive attached to my airport extreme. Apologies if I am being a little dumb.

  • How to access a USB disk drive connected to Airport Extreme from a Windows 7 PC?

    How can I access a USB disk drive connected to Airport Extreme from a Windows 7 PC?

    ...Called it a roaming network.  Wireless mode is create a wireless network. I have checked allow this network to be extended.  Probably need to uncheck that?
    Yes, that option should be deselected as it only pertains to when both routers are interconnected by wireless. Since you have a roaming network, they of course, would be interconnected by Ethernet.
    The other important settings for a roaming network are:
    Each router must have a unique station name. For the AirPort, this would be called its Base Station Name. I believe the default station name for Linksys routers is: linksys
    Each router must broadcast a wireless network with an identical Network Name. For the Linksys, Network Name is the same as its SSID.
    Each router wireless network must use the same Wireless Security type and password. The Linksys WRT-54G is capable of up to WPA2 Personal. If you have it set to this level of security, the AirPort should be at the same setting.
    Make sure that each router is not on the same Radio Channel for the 2.4 GHz radio. In the US, there are basically only three non-overlapping channels: 1, 6, or 11. Set each so that they don't use the same channel but use of those three choices.

  • WARNING: NEW-PAGE PRINT can no longer be used to print dialog box

    i am getting a warning as 'NEW-PAGE PRINT can no longer be used to print dialog box'. Please suggest what method can i use otherwise

    Please create a screenshot of the problem you're seeing by following the guide mentioned at [[How do I create a screenshot of my problem?]].
    Once you've done this, attach the saved screenshot file to your forum post by clicking the '''Browse...''' button below the ''Post your reply'' box. This will help us to visualize the problem.
    '''Try the Firefox Safe Mode''' to see how it works there. The Safe Mode is a troubleshooting mode, which disables most add-ons.''
    ''(If you're not using it, switch to the Default theme.)''
    * You can open the Firefox 4.0+ Safe Mode by holding the '''Shift''' key when you use the Firefox desktop or Start menu shortcut.
    * Or use the Help menu item and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
    ''Don't select anything right now, just use "'Start in Safe Mode"''
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shift key) to open it again.''
    '''''If it is good in the Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one.
    Please follow the [[Troubleshooting extensions and themes]] article for that.
    ''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''

  • How can I set up the canon printer mf4380dn for macbook pro MD318

    I can not set up the canon printer mf4380dn for macbook pro MD318 even thought I set up the printing driver already. The printer usually work good for printing via windows laptop.
    I tried some way but error appear "unable to verify the printer on your network". I printing IP is available

    Upgrade your RAM to at least 4GB's.  Your machine can support 6GB's, but upgrade to 4GB's first. Regardless of what Apple says, you need at least 4GB's to run Lion properly.

  • How do I connect my Airport Extreme 802.11n to Epson 645 Printer?

    I can't figure out how to connect my Airport Extreme 802.11n to my Epson 645 Printer.  Can anyone help me?  Thanks!

    You may want to try reinstalling Mavericks. Airport Utility installed by Mavericks may no longer connect to your older AEBS (though I've not heard that.) Installing the Old AirPort Utility (Version 5.6) on Mountain Lion | frank.is.
    Reinstall Lion, Mountain Lion, or Mavericks
         Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
         COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the computer and
         after the chime press and hold down the OPTION key until the boot manager screen appears.
         Select the Recovery HD and click on the downward pointing arrow button.
         Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu.
         Repair the Hard Drive and Permissions as follows.
    After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
         Reinstall Lion/Mountain Lion, Mavericks: Select ReinstallLion/Mountain Lion, Mavericks from
         the Utilities menu, and click on the Continue button.
         Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is
                    three times faster than wireless.

  • Printing to Canon Pixma MP170 on Airport Express from Windows XP

    I got a Canon MP170 basically for free with the rebates.
    Connected to my Airport Express, installed the drivers on my PowerMac and I can print just fine (I am aware that the scanner will only work when connected directly - which also works fine).
    Now I installed the drivers on Windows XP, then added a new printer, selected the Standard TCP/IP port where I had my other printer on the Aiport Express before and changed the printer driver to the Canon MP170. Could not print.
    Deleted the port (only managed after deleting the printer(s) defined with it and restarting Windows ...) and created the port from scratch - Standard TCP/IP port, IP address of my Airport Express, device type Generic Network Card, raw port 9100. Won't print.
    Anybody managed to get this going?
    Thanks in advance and Best Regards,
    alex

    Try Port 9101
    Printing from a Windows XP PC to a printer attached to an Airport Extreme Base Station or Airport Express
    http://www.ifelix.co.uk/tech/1004.html
    Or try Bonjour
    Printing from a Windows XP PC to a printer attached to an Airport Extreme Base Station or Airport Express using Bonjour
    http://www.ifelix.co.uk/tech/1008.html
    Problems with finding Printer Driver on Windows XP when using printer connected to Airport Extreme or Express
    http://www.ifelix.co.uk/tech/1012.html
    iFelix

  • IMac connected to Airport Extreme stopped detecting printer

    Can't connect any more printer (Epson Stylus SX125) to iMac through Airport Extreme. Any solution?

    GoldHill wrote:
    USB Backup drive connected to USB port on Airport Extreme. Running system 10.5.5
    On my Macbook Pro, which I connect wirelessly, I was able to start Time Machine... Time Machine saw the backup drive and did a backup.. Yes it took a long time!! Anyway all is cool with that.
    My iMac is connected to the Airport Extreme by Ethernet. On the iMac when I started Time Machine, it does not see the backup hard drive. I can see and share the hard drive... works fine. But no luck with TM seeing the hard drive on the iMac.
    Questions is will Time Machine work with a computer that is connected to airport extreme by ethernet. If yes how o you set it up and what might be wrong??
    yes, it should work. hard to say what's wrong. try the following terminal command. it should not be necessary but it should help.
    defaults write com.apple.systempreferences TMShowUnsupportedNetworkVolumes 1
    One other important thing to mention. At first I plugged my new backup hard drive directly into the iMac with firewire 800. I started time machine and started the backup. I then stopped that backup and plugged the backup hard drive into the Airport extreme (USB port) I then trashed the partial backup folder off the backup hard drive. Is it possible that on the iMac there is still some TM file there pointing to the old original backup file??
    have you emptied trash? you should. the files won't really be deleted till you do. there is one other hidden file but it should not be necessary to remove it.
    Thanks.... any help is appreciated.

  • Printing problems with HP 1012 connected via Airport Extreme - resolved?

    I originally posted on this issue in a long-running discussion on HP printer issues.
    http://discussions.apple.com/message.jspa?messageID=10109788#10109788
    Problem: Upgraded iMac 10.4.11 to 10.6 Following upgrade everything seemed fine except that the HP 1012 connected via Airport Extreme was not responsive. The system knew the printer was there, had installed the proper driver for it.
    Intermediate troubleshooting: I tried to use Airport Utility to check the AE. It timed-out when trying to retrieve the AE setup specifications. I tried to update the firmware (7.4.1 to 7.4.2); system timed-out after a very long several minute "search for new version of the firmware."
    Apparent solution: (any of the following may have made the difference - sorry not to have been more systematic)
    a. I turned off AP on the iMac.
    b. I unplugged the AE base station for one minute+, then re-powered it.
    c. I opened my MBP with 10.5.7. Started up Airport Utility.
    d. I renamed the base station. Left all other settings alone.
    e. I installed the 7.4.2 firmware upgrade.
    f. I ran Preference Repairs on the iMac (though I had done this right after installation of 10.6)
    g. I turned on AP on the iMac.
    Result: Almost immediate connection to AP, printer quickly began printing several of the test documents that must have been waiting in queue.
    Too early to tell if I will have any further problems if if it permanently fixed.
    Thanks to the several messages in both Printer and Network categories that suggested one or more of the above steps.
    Stan

    I hooked up my wife's Deskjet 5150 to my mac via USB. Since the 5150 does not have a driver from HP to work in SL. I decided to us the generic Gutenprint v5.2.3. For the heck-of-it, I picked, HP Deskjet 5550-Gutenprint v5.2.3. It prints. and the utility works, BTW, I am low on black ink.
    I also tried the other printer drivers labeled "any printer name"-Gutenprint v5.2.3. and they all worked with the 5150.
    So now that I know that the 5150's will work via USB with SL, I will now upgrade the other two laptops in my house to SL.
    How to:
    Turn printer on.
    open System pref/ printer-fax/ add printer
    Select hp desktop 5100
    (name: -- Change name if you want - I kept " hp deskjet 5100"
    Location: Your computer
    Print Using: open dropdown box, select printer software. Type in: " Gutenprint" or "deskjet". I picked the HP Deskjet 5550-gutenprint v5.2.3. but I do not think it matters as long as it is a -gutenprint v5.2.3 driver.
    Select OK

  • HT4356 I have an HP 4500 printer connected to airport extreme with usb.  All our portable notebooks print via air but cannot get iPad to be recognized for printing.  Do I really have to have one of the other HPs listed?

    I have an HP 4500 printer connected to airport extreme with usb.  All our portable notebooks print via air but cannot get iPad to be recognized for printing.  Do I really have to have one of the other HPs listed?

    Rufus Cat-
    Even if it was compatible, AirPrint does not work through a USB link, only Ethernet or WiFi.
    I do not see your HP 4500 listed on Apple's list of AirPrint compatible printers.  <iOS: AirPrint 101>  Therefore you need to take another approach.  To start, I suggest you download the free HP App, ePrint Home & Biz.  It has limitations, but should get you printing with your existing setup.
    There are other printing Apps with more features such as Print n Share and PrintCentral, but they can only be accessed from within other Apps that have the "Open In" option.
    Your best option may be to share your computer's printer as AirPrint over WiFi.  Programs that are reported to do that well are Printopia and FingerPrint.  Your computer must be on and awake any time you want to print.  <Printopia for Macintosh>  <FingerPrint for PC and Mac>
    Fred

  • Time machine can no longer see USB drive connected to airport extreme

    According to what I read, as of March, a year ago March, with update 7.3.1 Time Machine will see the USB hard drive connected to the Airport Extreme. This was working fine. It no longer does. I had the latest airport extreme software and firmware updates. I tried going back to 7.3.1.
    Does any one have any idea how to make Time Machine work again when connected to my airport extreme?

    bradleydad wrote:
    According to what I read, as of March, a year ago March, with update 7.3.1 Time Machine will see the USB hard drive connected to the Airport Extreme. This was working fine. It no longer does. I had the latest airport extreme software and firmware updates. I tried going back to 7.3.1.
    Does any one have any idea how to make Time Machine work again when connected to my airport extreme?
    what exactly do you mean when you say that TM doesn't see the drive? do you mean you can not choose it as the destination TM drive in TM system preferences? do you see the airport drive mounted in finder? if yes, connect it directly to your mac and repair the disk (not permissions) with disk utility. then move it back to AEBS. see if that helps. if not try the following terminal command
    defaults write com.apple.systempreferences TMShowUnsupportedNetworkVolumes 1
    it should not be necessary with drives connected to AEBS but it might work.

Maybe you are looking for