Can no longer pull clip into timeline from Viewer??

I no longer have the ability to drag a clip, or sub clip if I've chosen in and out points, into the timeline from the Viewer.
When I attempt to do this the clip moves as if I'm repositioning the clip within the Viewer window, but does not move to the timeline.....thoughts??
Thnx,
Bh

Either the video track that you are trying to edit on is locked (dark grey diagonal lines thru the track)
or the source and destination patch buttons are disconnected.
The Illustration below shows the v1 source correctly connected to the V1 destination:

Similar Messages

  • Just started happening: Can no longer drag clips into Audio 1

    Hi-  I just encountered a problem.  When I drag a clip from the source monitor, the audio automatically splits to Audio7 & 8.  Can someone explain why this is happening?  Is this a problem and if so, how do I fix it?

    Thanks for the quick reply...
    Does it really matter if the audio is not in the Audio 1 line?  I'm trying to get myself to stop worrying about the non important stuff and finish the project.
    My ADD is horrible, things like this distract me!  The final outcome is a video testimonial page for a client... so I'm not looking for 5.1 audio.
    Is this a big deal?
    Untitled from Chris Ratchford on Vimeo.

  • Can not import video clips into iMovie from Photos

    I have some clips that I copied from my GoPro to my iPad via the Apple Camera Connection Kit.  When I open iMovie there are icons for the clips but iMovie will not import them.  The format is H.264.  Is there a way of tricking iMovie?

    Here is the problem, Im making a movie, I took all the video on my Kodak V610 Camera. I have the clips in .mov format. The clips are stored on an external disk in my iPhoto library.
    Your digital camera probably uses MPEG-4 video (compatible with iMovie '08 in combination with µ-Law 2:1 compressed audio (which is not iMovie '08 compatible). While using the MPEG Streamclip MPEG-4 conversion will work, the prefered methof would be to use the QT "Movie to MPEG-4" option in QT Pro (quicker if you have it) or GarageBand (via the "Expert Settings option) to "pass through" you video while converting the audio to AAC (MPEG-4 audio). A mono setting of 64 Kbps with a 44.1 KHz sampling rate is a bit of "overkill" with respect to the original audio but will be quality compatible with what iMovie uses for its output presets.

  • I can no longer import photos into lightroom from card reader or camera.

    Just recently my Lightroom 5.3, now 5.6, has stopped allowing me to import photos from my card reader or directly from my camera. When I click the Import button, it lists the card but will not show the previews and the Import button does not become active. What is wrong?
    All other modules seem to work fine.

    I have the same problem. My program has worked perfectly until a few days ago.
    Now the module import has the central screent in blank, empty, and not import anything.
    I am also looking for a solution

  • Can`t left click and drag clip into timeline..Need advice

    Can`t left click and drag clip into timeline, or drag clips around in timeline.
    Can insert into timeline from Source Window but can't drag from source window.
    Can cut and paste within timeline.
    Restarting cs5 doesn`t help, but restarting computer solves problem for a while.
    Tried many mouses, but that didn`t help.
    Have no idea how I got the name OLD PRO, must have been drinking champagne years ago, because I am a bumbler par excellence!
    Message was edited by: old pro

    Thank you so much for asking
    In the Project Panel a left click highlights the asset but ignores the drag.
    In the timeline, a left click highlights the panel and when I try to drag it gives a flicker but that's all.
    I can cut and paste in the timeline.
    A restart of CS5 has no effect. Restarting the computer solves the problem for a while.
    Four different mouses--same problem.
    Doug

  • Songs Bought from iTunes Store Can No Longer Be Made Into Ringtones???

    I just tried to make a ringtone with a song I bought from the iTunes store a couple of months ago - it's telling me "This song can no longer be made into a ringtone."
    Is there an expiration date on songs purchased from the iTunes store??? Incredibly lame if so.

    are you guys sure those songs can be made into ringtones? you can't just purchase any song and make it a ringtone it actualy must have the ringtone bell next to it. i purchased the new kanye cd and i got those messages when i tried to convert some of his songs which had no bells...amybe this is your problem?

  • I can not drag clips into timeline with adobe premiere CC

    I can not drag clips into timeline with adobe premiere CC, I created a sequence and still does not work

    See if this works...  2nd post for picture of NEW ITEM process http://forums.adobe.com/message/3776153

  • I can no longer shoot directly into phaseone software since i use my new macbook pro with retina display. pictures are not transfered from the camera into captureone. anyone else with this problem? any solutions?

    i can no longer shoot directly into phaseone software - neihter version 6 or 7 - since i use my new macbook pro with retina display. pictures are not transfered from the camera into captureone. anyone else with this problem? any solutions?

    My eyes just glazed over...Please in the future break down each of your issues with paragraphs separated by two carriage returns. It would be much easier when trying to address your issues.
    Go to Apple menu -> System Preferences -> Keyboard and Mouse -> Mouse
    And edit your mouse settings to do what you want it to do.
    Secondly, this is not the place to vent. If you have a complaint, there is:
    http://www.apple.com/feedback/
    or http://www.apple.com/contact/
    We are just end users here helping other end users.
    Third, from my understanding, it would appear you are concerned about the noise the hard drive makes when it falls asleep? Why not put your machine in screen saver mode instead? Apple menu -> System Preferences -> Energy Saver turn off all Energy Saver settings, or set them to run Never.
    Fourth, if your machine was purchased just a few days ago, you may still be able to get an exchange from the store, quicker than you can get a repair done. You may want to look into that possibility.
    Fifth, it does appear you found the Logic forum. I would persist in asking there how to solve your technical issue with Logic regarding the audio. It may be you don't have to do anything special to the hard drive. Remember audio can be transmitted by wire, avoiding ambient sounds.
    Good luck!

  • Can no longer be made into a ringtone

    I purchased Jump by Van Halen even though I already own the song from a cd. When I tried to make a ring tone (it has a bell by it in itunes store and my library) it tells me "Jump by Van Halen can no longer be made into a ringtone".
    I can not find a link on Apple's support site to ask them. Any help?
    Lee

    are you guys sure those songs can be made into ringtones? you can't just purchase any song and make it a ringtone it actualy must have the ringtone bell next to it. i purchased the new kanye cd and i got those messages when i tried to convert some of his songs which had no bells...amybe this is your problem?

  • Sophisticated Lady by Billie Holiday can no longer be made into a ringtone

    Despite the fact the I already own several versions of this song on CD, I suckered myself into buying it from iTunes just so that I could make it into a ringtone for my iPhone.
    Once it finished downloading iTunes cheerfully tells me: "Sophisticated Lady" by Billie Holiday can no longer be made into a ringtone.
    I wonder, was I too slow? Were there just too many people making this song into ringtone so now the ringtone quota for "Sophisticated Lady" has been filled?
    What annoys me is there is no way of knowing, that I can tell, if a song can be made in to a ringtone or not. So, if you already own the music, it's a gamble. You have to buy the song from iTunes and then try to make it into a ringtone. If you're lucky it'll work. You can't just buy the ringtone. You have to buy the song, and then the ringtone, which is 2 * $0.99 + whatever else you payed for the music.

    I think there are several people having issues with the ringtone icon not properly appearing for songs that can be made into tones. Also, there seems to be quite a bit of music that once could be made into ringtones that can no longer be made into songs. I get that for several of the Van Halen songs that initially were able to be made into ringtones, but that no longer can be. For example I get the error message "Eruption" by Van Halen can no longer be made into a ringtone.
    If anyone else has figured this out, please let us know.

  • Why can't i drag clips to timeline?

    I'm new.
    Why can't i drag clips to timeline? I set in and out points but clips will not drag.

    So it sounds like you're dragging from the source monitor and not from the project window. Either way, is it creating a new sequence for you when you drop it in over the blank timeline? If not what IS it doing? What version of pr are you using?

  • How do I get video clips into Organizer from Elements?

    I have broken my raw video into pieces in elements but can't get it to import into organizer.
    I am using Elements 11 Trial.

    The video is actually a football highlight film for our son and came to us as a single mp4 file with about 60 plays of video on it.
    What I am trying to do is
    1) Cut it down into 60 individual videos (which I did and currently have in my project).
    2) Save the pieces off as individual video clips.
    3) Get the ability to rank/rate each video and select the 25 or so that will make up the final video.
    4) Polish/edit those that make the grade.
    5) Organize and assemble.
    Does this make sense?
    t
    Date: Mon, 19 Nov 2012 14:44:31 -0700
    From: [email protected]
    To: [email protected]
    Subject: How do I get video clips into Organizer from Elements?
        Re: How do I get video clips into Organizer from Elements?
        created by whsprague in Premiere Elements - View the full discussion
    karaannmbb wrote: I have broken my raw video into pieces in elements but can't get it to import into organizer. I am using Elements 11 Trial.Place the "Work Area Bars" (located on the time line) so that only a "piece" is covered.  Then "Share" to a computer file. Pick a file type that suits your needs.  Be sure to check the box titled "Share WorkArea Bar Only".  Unfortunately, the clip piece will be re-encoded.  PrE11 will do that well, but not perfect because any encoding always seems to loose a little. You did not say what camera you are using.  The software that came with my Sony and Panasonic camcorders is much better for splitting clips into smaller clips.  Some sort of magic is in them where re-encoding does not take place.  The pieces have the same picture quality as the original.   So, when I do what you want, I break it into pieces with the camcorder software, the put the video together in PrE with all the creative tools it offers.  Bill
         Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4859754#4859754
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4859754#4859754
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4859754#4859754. In the Actions box on the right, click the Stop Email Notifications link.
         Start a new discussion in Premiere Elements by email or at Adobe Community
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • After purchase: ". . . can no longer be made into a ringtone"

    I figured I'd get my first ringtone.
    Maybe it was a bad choice, but "Mandy" by Barry Manilow was there, with the ringtone bell. My daughter's name. I knew it would make her crazy!
    Immediately after I downloaded it, I went to make the ringtone- and a dialog box came up that said "'Mandy' by Barry Manilow can no longer be made into a ringtone."
    C'mon, Apple! Is there any other reason I would buy that song? How do I get my 99 cents credited back?

    Sheila Ford wrote:
    The 800-number? Is there any other way?
    When you get your iTunes statement via email, there is a link for each song that says, "Report a problem." Click on the link adjacent to the song you have issue with, follow the prompts and send your issue to Apple.
    They usually respond in less than a day.

  • SharePoint Navigation Error:The context has expired and can no longer be used. (Exception from HRESULT: 0x80090317)

    Hi,
    I take a exeption  on the  SharePoint 2013 left navigation. 
    Exeption:  "The context has expired and can no longer be used. (Exception from HRESULT: 0x80090317)"
    I searched  this exeption keyword on the internet and  I find usualy 3 results
    1)check datetime servers --> I checked datetime for all SP Severs ,DB server and AD server ..there is  no problem
    2)Disabled the WebPageSecurity Validation on CA>General Settings-->I tired  and problem not solved
    3) Reset IIS --> if I restart IIS problem solved  but  after 2-3 hours or anytime  error comes again..
    ULS Log:
    PortalSiteMapProvider was unable to fetch children for node
     at URL: /MySite/MySubSite, message: The context has expired and can no longer be used. (Exception from HRESULT: 0x80090317), stack trace:   
     at Microsoft.SharePoint.SPGlobal.HandleComException(COMException comEx)    
     at Microsoft.SharePoint.Library.SPRequest.SetHttpParameters(String bstrHttpMethod, String bstrRequestDigest, UInt32 flags, Guid gTranLockerId, Byte[]& ppsaImpersonateUserToken, Boolean bIgnoreTimeout, String bstrUserLogin, String bstrUserKey, UInt32
    ulRoleCount, String bstrRoles, Boolean bWindowsMode, String bstrAppPrincipalName, Boolean bIsHostHeaderAppPrincipal, String bstrOriginalAppPrincipalIdentifier, ApplicationPrincipalInfo& pAppUserInfo, Boolean bInvalidateCachedConfigurationProperties, Int32
    lAppDomainId, ISPManagedObjectFactory pFactory, Boolean bCallstack, ISPDataCallback pCanaryCallback)    
     at Microsoft.SharePoint.SPGlobal.CreateSPRequestAndSetIdentity(SPSite site, String name, Boolean bNotGlobalAdminCode, String strUrl, Boolean bNotAddToContext, Byte[] UserToken, SPAppPrincipalToken appPrincipalToken, String userName, Boolean bIgnoreTokenTimeout,
    Boolean bAsAnonymous)    
     at Microsoft.SharePoint.SPWeb.InitializeSPRequest()    
     at Microsoft.SharePoint.SPWeb.EnsureSPRequest()    
     at Microsoft.SharePoint.SPWeb.get_Request()    
     at Microsoft.SharePoint.Publishing.Navigation.SiteNavigationSettings..ctor(SPSite site)    
     at Microsoft.SharePoint.Publishing.Navigation.SiteNavigationSettings.GetSiteNavigationSettings(SPSite site)    
     at Microsoft.SharePoint.Publishing.Navigation.PortalSiteMapNode.GetNavigationChildren(NodeTypes includedTypes, NodeTypes includedHiddenTypes, Boolean trimmingEnabled, OrderingMethod ordering, AutomaticSortingMethod method, Boolean ascending, Int32 lcid)
     at Microsoft.SharePoint.Publishing.Navigation.PortalSiteMapNode.GetNavigationChildren(NodeTypes includedTypes, NodeTypes includedHiddenTypes, OrderingMethod ordering, AutomaticSortingMethod method, Boolean ascending, Int32 lcid)    
     at Microsoft.SharePoint.Publishing.Navigation.PortalSiteMapNode.GetNavigationChildren(NodeTypes includedHiddenTypes)    
     at Microsoft.SharePoint.Publishing.Navigation.PortalSiteMapProvider.GetChildNodes(PortalSiteMapNode node, NodeTypes includedHiddenTypes)
    Plaase Help.

    Hi Veli,
    Please check the security token timeout value and it is set to 1440 as expected by default. You can check via running the command:
    stsadm -o getproperty -pn token-timeout
    Then check the OOB recycle times of the probkematic web application pool, and add daily recycle times for the problematic web application pool. You can do as the article:
    http://technet.microsoft.com/en-us/library/cc754494(v=WS.10).aspx
    Best Regards,
    Wendy
    Wendy Li
    TechNet Community Support

  • The context has expired and can no longer be used. (Exception from HRESULT: 0x80090317)

    We have a problem with our wiki site collection. Once a day (and sometimes more), we get the following error message :
    The context has expired and can no longer be used. (Exception from HRESULT: 0x80090317)
    This message is displayed to everyone, and will stay there for an hour or so before the collection is back to life.
    Doing an iisreset would get the site working but that will last for a day at the most.
    This is what we checked and tried so far :
    1. Our time zones are set and are correct.
    2. Changing the timeout or disabling the web page security validation (followed by an iisreset) didn't work.
    3. All server use the same NTP server for time sync (and they are indeed in sync).
    4. It is happening only on the wiki collection, not the other collections.
    5. We are unable to reproduce the behavior on the staging servers.
    Some particularities :
    1. Regional settings are set to French (Canada)
    2. We have 500+ wiki pages in the site collection
    3. We require page check-out / check-in for editing. Tried without, same problem.
    Any ideas as to what should we try next ?
    Regards,
    homerggg

    Hi,
    I don't think we have changed them from the default, a quick look shows ours are set to:
    Token-timeout = 24hrs
    FormsTokenLifetime = 10hrs
    WindowsTokenLifetime = 10hrs
    LogonTokenCacheExpirationWindow = 10m
    Rob

Maybe you are looking for

  • How to include subtitles to DVD using burn in finder?

    Hi I have downloaded french movie in .avi and it has .srt file with it with the subtitles. So when I go to burn the movie using burn in finder window how do I include the subs to work with it? Thanks in advance Tracy

  • Hyperlinks gone astray

    I'm building tables of contents programmatically and save them as tagged text for importing into InDesign (CS3) for later export to PDF. That works fine for bookmarks and hyperlinks to web sites but not for links to other PDF documents. Why? In fact

  • Alternate hierarchy dimension build with load rules

    Hi, I am trying to build a alternate hierarchy dimension using load rules (I feel using EIS is easier to build ASO and multiple hierarchies but we r trying to get rid of EIS member loads). Looking at different posts my understanding is it has to be d

  • Examples for using the Flex-Ajax-Bridge

    All samples that ship with BlazeDS use pure Flex on the client-side; what I would like to have are samples that show the Flex-Ajax-Bridge in action; using BlazeDS/LCDS as the data exchange engine; and then use this engine's capabilities to do Ajax st

  • Mac 10.7.4 keep on crashing when I turn it on

    I don't know whats the problem with this. This is what I get. Please help Interval Since Last Panic Report:  17101 sec Panics Since Last Report:          7 Anonymous UUID:                    5EFBF3AC-F5C0-4C35-B34C-6FFC372C8BCB Wed Aug 22 20:55:56 20