Can no longer "right click" after installing 10.6.7

Ever since I updated my macbook with 10.6.7 I am no longer able to "right click" with my two fingers and thumb. HELP!

OK, in that case please enable the guest account, log into it, and see whether you can set the same trackpad preference there. If you can, then log out of the guest account, go back to your account, open a Terminal window, and copy or drag the following text into the window (don't type it yourself):rm Library/Preferences/{,ByHost/}.GlobalPreferences.*plistPress the Return key. Then log out and log back in, and reset your trackpad preferences.

Similar Messages

I upgraded to Maverick O/S and I can no longer right click on iPhoto images to find my photo files. My photo files are not where they were before upgrade.

I upgraded to Maverick O/S and I can no longer right click on iPhoto images to find my photo files. My photo files are not where they were before upgrade.

Have you checked the sorting settings to make sure they are as you expect?
OT

Can no longer send mail after installing Yosemite

can no longer send mail after installing Yosemite

Hi nwpmike,
When I uncheck "SSL" it's working well, but it's not very secure. When I leave SSL, I got in "Connection Doctor" the message "Trying to log in to this SMTP account failed. Verify that the username and password are correct.", only for the SMTP. For the IMAP, the status in Green. It's also working well on the iPhone 6 with ios8 and other mac with OS X 10.9 and previous versions.
The only thing that can be involved is that the certificat used by my mail provider is expired.
With connection docteur, there is a button "Show Details". Here is the conversation when connecting to the smtp.
READ Oct 18 23:33:53.363 [kCFStreamSocketSecurityLevelNone] -- host:smtp.planet-service.fr -- port:587 -- socket:0x6000014a58e0 -- thread:0x600001e6fbc0
250-smtp.planet-service.fr
250-AUTH LOGIN CRAM-MD5 PLAIN
250-AUTH=LOGIN CRAM-MD5 PLAIN
250-STARTTLS
250-PIPELINING
250 8BITMIME
WROTE Oct 18 23:33:53.363 [kCFStreamSocketSecurityLevelNone] -- host:smtp.planet-service.fr -- port:587 -- socket:0x6080010b1400 -- thread:0x600003479b00
STARTTLS
WROTE Oct 18 23:33:53.363 [kCFStreamSocketSecurityLevelNone] -- host:smtp.planet-service.fr -- port:587 -- socket:0x600000ab43a0 -- thread:0x6080032654c0
STARTTLS
WROTE Oct 18 23:33:53.364 [kCFStreamSocketSecurityLevelNone] -- host:smtp.planet-service.fr -- port:587 -- socket:0x6000014a58e0 -- thread:0x600001e6fbc0
STARTTLS
READ Oct 18 23:33:53.432 [kCFStreamSocketSecurityLevelNone] -- host:smtp.planet-service.fr -- port:587 -- socket:0x600000ab43a0 -- thread:0x6080032654c0
220 ready for tls
READ Oct 18 23:33:53.432 [kCFStreamSocketSecurityLevelNone] -- host:smtp.planet-service.fr -- port:587 -- socket:0x6080010b1400 -- thread:0x600003479b00
220 ready for tls
READ Oct 18 23:33:53.433 [kCFStreamSocketSecurityLevelNone] -- host:smtp.planet-service.fr -- port:587 -- socket:0x6000014a58e0 -- thread:0x600001e6fbc0
220 ready for tls
WROTE Oct 18 23:33:53.642 [kCFStreamSocketSecurityLevelTLSv1_0] -- host:smtp.planet-service.fr -- port:587 -- socket:0x600000ab43a0 -- thread:0x6080032654c0
EHLO [10.0.0.108]
READ Oct 18 23:33:53.698 [kCFStreamSocketSecurityLevelTLSv1_0] -- host:smtp.planet-service.fr -- port:587 -- socket:0x600000ab43a0 -- thread:0x6080032654c0
250-smtp.planet-service.fr
250-AUTH LOGIN CRAM-MD5 PLAIN
250-AUTH=LOGIN CRAM-MD5 PLAIN
250-PIPELINING
250 8BITMIME
WROTE Oct 18 23:33:53.699 [kCFStreamSocketSecurityLevelTLSv1_0] -- host:smtp.planet-service.fr -- port:587 -- socket:0x600000ab43a0 -- thread:0x6080032654c0
QUIT
WROTE Oct 18 23:33:53.777 [kCFStreamSocketSecurityLevelTLSv1_0] -- host:smtp.planet-service.fr -- port:587 -- socket:0x6000014a58e0 -- thread:0x600001e6fbc0
EHLO [10.0.0.108]
WROTE Oct 18 23:33:53.778 [kCFStreamSocketSecurityLevelTLSv1_0] -- host:smtp.planet-service.fr -- port:587 -- socket:0x6080010b1400 -- thread:0x600003479b00
EHLO [10.0.0.108]
READ Oct 18 23:33:53.838 [kCFStreamSocketSecurityLevelTLSv1_0] -- host:smtp.planet-service.fr -- port:587 -- socket:0x6000014a58e0 -- thread:0x600001e6fbc0
250-smtp.planet-service.fr
250-AUTH LOGIN CRAM-MD5 PLAIN
250-AUTH=LOGIN CRAM-MD5 PLAIN
250-PIPELINING
250 8BITMIME
WROTE Oct 18 23:33:53.838 [kCFStreamSocketSecurityLevelTLSv1_0] -- host:smtp.planet-service.fr -- port:587 -- socket:0x6000014a58e0 -- thread:0x600001e6fbc0
QUIT
READ Oct 18 23:33:53.842 [kCFStreamSocketSecurityLevelTLSv1_0] -- host:smtp.planet-service.fr -- port:587 -- socket:0x6080010b1400 -- thread:0x600003479b00
250-smtp.planet-service.fr
250-AUTH LOGIN CRAM-MD5 PLAIN
250-AUTH=LOGIN CRAM-MD5 PLAIN
250-PIPELINING
250 8BITMIME
WROTE Oct 18 23:33:53.843 [kCFStreamSocketSecurityLevelTLSv1_0] -- host:smtp.planet-service.fr -- port:587 -- socket:0x6080010b1400 -- thread:0x600003479b00
QUIT

After 10.10.3 update I can no longer right click. Anyone else with this issue?

After updating to the latest software I am unable to right click on my magic mouse like before. Now I have to use control and click. Anyone else with this issue?

Did you check the settings in Mouse preferences?
Download and install the OS X Yosemite 10.10.3 Combo Update.

Connected Apple devices - can no longer right click to show info

I have iTunes 12.0.1.26 installed, but now find that you are no longer able to right click on any connected Apple device and look at the details of that device, such as space used, software version, or look at the device settings for syncing Calendars and Emails etc. Why have these options been removed? If I right-click on my iPhone, the only options I get are Play, Shuffle, Eject, Reset Warnings. You actually cannot click on the device itself to reveal this information, all you get is the expansion arrow to the left and the sub-menus underneath, such as Music, Films etc.
Not all of my devices are on the latest software version, particularly my iPhone, as I cannot fit it on!

View > Show Sidebar or Ctrl+S. Your device should be on the left like iTunes 10. Do the results change?

Can no longer overclock CPU after installing 4890 Cyclone OC

I recently purchased a MSI 4890 Cyclone OC to replace my XFX 8800 GT. With the 8800 GT, I was able to overclock my E8400 to 3.6 GHz from 3 GHz stock. After I installed the 4890, my PC will no longer accept any CPU overclock. When I power on my system with any OC, the PC will start to come up, power cycle itself before POST and reset the BIOS back to default clock speeds, and finish booting into Windows XP Home. Even with no OC, the PC seems to take longer to POST than with the 8800 GT.
I uninstalled the Nvidia driver before installing the 4890 and installed the latest ATI driver v. 9.8. I flashed my motherboard's BIOS to the latest version, set it to the defaults, and then put my OC settings back in. However, that didn't help.
I read in the NCIX forum that someone else had this exact same problem with his 4890 Cyclone, and he had a different model Gigabyte board. I'm wondering if there is some sort of incompatibility. Thanks for any help.

Quote
I put my 8800 GT back into my PC and I can overclock my CPU just fine again.
Yes, I understood you the first time.
Quote
I have not talked to Gigabyte yet since my problems only occur with the 4890 installed.
That it precisely why I suggested to contact Gigabyte. Maybe they can reproduce it and come up with a BIOS Fix or something. I had a 4890 Cyclone here for testing last week which I used to build a system for a friend. I had no such issues when I tested the card in my P45 Platinum (E6600 overclocked to 400 x 9) and he also has no problems on his P45 Asus Board (OCed Q9650).

Ever since I updated, I can no longer right click on links, choose "Open Link in a new tab" and expect it to do anything at all. WTF!

I should note, I am using the latest version as of today, I am using the portable version, and I have a TON of addons, a list of which I can post if I have to. Any Ideas what could be causing this? I use the "Open link in a New Tab" option every single day. I don't want to have to hit some special button to do so like my current temporary workaround with tab mix plus, I miss the old method, the option is still there in the context menu, but it won't do a single thing ever :(. Also not working is "Open Link in This Tab" and "Open Link in Duplicated Tab" (Not that I ever use those ones so who give a F). "Open Links in New Tabs" Still works though, but not for single links, so its not an ideal workaround. I can't afford to simply reset the browser, my settings, my addons, everything would be gone. I could back it up with FEBE but then I would be right back where I started. :(

Guys, I should wrap this up and let you all know so this page may help those experiencing the Firebug Context Menu Glitch. It's messed up, that was one of my favourite programs :(. Now looking for a version that doesn't do that.

Time Machine can't find external drive after installing Lion

Time Machine can't find external drive after installing Lion. I have a Laice 1 terabyte external drive that worked fine with Snow Leopard and now no show ... tried connecting it to front port and Mac Pro can't see it. Also lost Office,Quicken, and Final Cut Pro says: " You can't open application because Power PC apps are no longer supported" this is Not a good surprise!

Does the drive work when just directly connected? If so, have you prepped the drive?
Extended Hard Drive Preparation
1. Open Disk Utility in your Utilities folder. If you need to reformat your startup volume, then you must boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger or Leopard.)
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Set the number of partitions from the dropdown menu (use 1 partition unless you wish to make more.) Click on the Options button, set the partition scheme to GUID (only required for Intel Macs) then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the volume(s) mount on the Desktop.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.

I can't shut down mail after installing maverick

i can't shut down mail after installing maverick. mail won't let me restart orshut down because i can't get mail to close.

Command + Option + Esc will force quit any app.
Or click Force Quit from your Apple  drop down menu.
You can also force quit apps using Activity Monitor located in HD > Applications > Utilities

How do I reorder songs in a playlist in the new itunes??? I can no longer just click and drag. When I click, it doesn't move!!!! Need help ASAP- trying to prepare for an aerobics class and need songs in a specific order!

How do I reorder songs in a playlist in the new itunes??? I can no longer just click and drag. When I click, it doesn't move!!!! Need help ASAP- trying to prepare for an aerobics class and need songs in a specific order!

Vera,
Use View > View Options, and set 'Sort By" to "Manual Order."
Then you will be able to drag-n-drop songs up and down the list.

I have an older computer and can no longer update. After the latest Apple update I can no longer access my e-mail on my mac. I can view it on my iphone and on icloud. Is there a solution to this problem?

I have an older computer and can no longer update. After the latest Apple update I can no longer access my e-mail on my mac. I can view it on my iphone and on icloud. Is there a solution to this problem?

Apple changed MobileMe to iCloud and then restricted iCloud to 10.7 users only unfortunately
If your machine is a 64 bit processor Intel Mac you can upgrade to 10.7 for $29, however a lot of your 10.5/10.6/Rosetta based software could cease to function, especially third party hardware drivers for printers, fax machines, all-in-ones, scanners etc.
http://roaringapps.com/apps:table
Also depending how old the machine is, if it can accept 4GB of RAM (preferred), older video card, may not run 10.7 very well or stable.
My advice is to keep at 10.6.8, get a web based email service that's plaform/hardware neutral, forward your iPhone emails there. Gmail/Yahoo Mail for instance.
When your ready for new hardware and all new software, then buy a new machine.
If your going to go to 10.7 on your present hardware, I advise you clone 10.6.8 to a external drive first, that way you can c boot off the 10.6 disk erase the drive completely (necessary to remove hidden Lion Recovery Partition) and option boot off the 10.6.8 clone and reverse clone.
http://www.bombich.com/get_ready_for_lion.html

Can no longer use pages after upgrade, even after three restorations! Huge inconvenience!!

Can anyone help me with why I can no longer use pages after the latest upgrade to iOS 7.04. I have restored my ipad three times and it still won't work. It s ahuge inconvenience when all my documents are on pages. If you can get back to me as soon as possible that would be great!!

Turn off iCloud for Pages on your mobile device at Settings > Pages > Use iCloud > Off.
Open Pages on your computer and move any documents in iCloud to your desktop for safe keeping.
Navigate to system preferences > iCloud > Manage and check that Pages documents are not taking any space in the cloud, delete them if they are.
Enable iCloud syncing for Pages on your mobile device and launch the App.
If Pages now opens properly, start to add back documents from your desktop one at a time (or in small groups if you have many).

Can't burn blank CD after installing CD that came with ipod nano

Can't burn blank CD after installing ipod software - I have the system prefs set to launch Toast 6 when inserting a blank disk, and the drive just churns and then ejects the CD. It mounts and runs burned music and data disks with no problem.
My job requires me to burn data disks from pictures I take at work. Should I re-install Toast? The OS? I ran Disk Utility to check/fix permissions, and no change.

The CD that came with the nano won't have anything on it that you won't get with a full iTunes install. In fact, it may have been an OLDER version of the iTunes software than what you had installed before.
I'd reccomend downloading the latest version of iTunes from Apple and installing that to rule out software reversion issues.
If the problem still exists, try booting into toast before inserting the blank disk and see if Toast can still burn to the CD. If it can, then odds are you have to re-instruct your computer to boot toast when a blank CD is inserted. If it can't see the blank CD, or the Finder spits it out again, then I think you'd have to re-install Toast.
Doc

I can not right click "open in new tab" nor open in new window, in my bookmark file.the bookmarks are all there, but I have to open a tab first then left click to open an item. Why can't I right click? The options are there, but not highlighted/clickable.

I can not right click "open in new tab" nor open in new window, in my bookmark file.the bookmarks are all there, but I have to open a tab first then left click to open an item. Why can't I right click? The options are there, but not highlighted/clickable.

now it is working?! Go figure. Yeah! Thanks anyway......

HT4623 I can't activate Location Services after installing ios& on Iphone 5.... any ideas?

I can't activate Location Services after installing ios& on Iphone 5.... any ideas?

I had the same issue with one of the three iPhones I updated on Wednesday. There are many processes that are working for people including:
- Resetting the device several times
- Toggling the "Dont' Allow Changes" setting under "Restrictions --> Location Services"
- Disabling Restrictions altogether.
- Restoring from backup
I was able to restore location services by selecting "Reset" and choosing "Erase All Content and Settings" to set the phone up as new. When the phone resets and goes through the setup process, I was given the option to turn on location services. I then restored from backup and was good to go.
Some people have been able to resolve the issue by resetting but only using "Reset All Settings" without having to erase all content, but that did not work for me. It took a while to get everything back to normal, but it is good to know that there was a somewhat simple solution.

Can no longer "right click" after installing 10.6.7

Similar Messages

Maybe you are looking for